fbdev: platforming metronomefb and am200epd

This patch splits metronomefb into the platform independent metronomefb and
the platform dependent am200epd.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 353 insertions, 273 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8da4683c5d20..ff6ea9a9be22 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -173,6 +173,11 @@ config FB_DEFERRED_IO
         depends on FB
         default y
 
+config FB_METRONOME
+        tristate
+        depends on FB
+        depends on FB_DEFERRED_IO
+
 config FB_SVGALIB
         tristate
         depends on FB
@@ -1927,19 +1932,18 @@ config FB_XILINX
           framebuffer. ML300 carries a 640*480 LCD display on the board,
           ML403 uses a standard DB15 VGA connector.
 
-config FB_METRONOME
-       tristate "Metronome display controller support"
+config FB_AM200EPD
+       tristate "AM-200 E-Ink EPD devkit support"
        depends on FB && ARCH_PXA && MMU
        select FB_SYS_FILLRECT
        select FB_SYS_COPYAREA
        select FB_SYS_IMAGEBLIT
        select FB_SYS_FOPS
        select FB_DEFERRED_IO
+       select FB_METRONOME
        help
-         This enables support for the Metronome display controller. Tested
-         with an E-Ink 800x600 display and Gumstix Connex through an AMLCD
-         interface. Please read <file:Documentation/fb/metronomefb.txt>
-         for more information.
+         This enables support for the Metronome display controller used on
+         the E-Ink AM-200 EPD devkit.
 
 config FB_VIRTUAL
         tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 80d58425c641..04bca35403ff 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
 
 # Hardware specific drivers go first
 obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
+obj-$(CONFIG_FB_AM200EPD)         += am200epd.o
 obj-$(CONFIG_FB_ARC)              += arcfb.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
 obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
new file mode 100644
index 000000000000..51e26c1f5e8b
--- /dev/null
+++ b/drivers/video/am200epd.c
@@ -0,0 +1,295 @@
+/*
+ * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+
+#include <video/metronomefb.h>
+
+#include <asm/arch/pxa-regs.h>
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+
+#define AF_SEL_GPIO_N 0x3
+#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
+#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
+#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
+#define GPDR1_OFFSET(pin) (pin - 32)
+#define GPCR1_OFFSET(pin) (pin - 32)
+#define GPSR1_OFFSET(pin) (pin - 32)
+#define GPCR0_OFFSET(pin) (pin)
+#define GPSR0_OFFSET(pin) (pin)
+
+static void am200_set_gpio_output(int pin, int val)
+{
+        u8 index;
+
+        index = pin >> 4;
+
+        switch (index) {
+        case 1:
+                if (val)
+                        GPSR0 |= (1 << GPSR0_OFFSET(pin));
+                else
+                        GPCR0 |= (1 << GPCR0_OFFSET(pin));
+                break;
+        case 2:
+                break;
+        case 3:
+                if (val)
+                        GPSR1 |= (1 << GPSR1_OFFSET(pin));
+                else
+                        GPCR1 |= (1 << GPCR1_OFFSET(pin));
+                break;
+        default:
+                printk(KERN_ERR "unimplemented\n");
+        }
+}
+
+static void __devinit am200_init_gpio_pin(int pin, int dir)
+{
+        u8 index;
+        /* dir 0 is output, 1 is input
+        - do 2 things here:
+        - set gpio alternate function to standard gpio
+        - set gpio direction to input or output  */
+
+        index = pin >> 4;
+        switch (index) {
+        case 1:
+                GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
+
+                if (dir)
+                        GPDR0 &= ~(1 << pin);
+                else
+                        GPDR0 |= (1 << pin);
+                break;
+        case 2:
+                GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
+
+                if (dir)
+                        GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+                else
+                        GPDR1 |= (1 << GPDR1_OFFSET(pin));
+                break;
+        case 3:
+                GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
+
+                if (dir)
+                        GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+                else
+                        GPDR1 |= (1 << GPDR1_OFFSET(pin));
+                break;
+        default:
+                printk(KERN_ERR "unimplemented\n");
+        }
+}
+
+static void am200_init_gpio_regs(struct metronomefb_par *par)
+{
+        am200_init_gpio_pin(LED_GPIO_PIN, 0);
+        am200_set_gpio_output(LED_GPIO_PIN, 0);
+
+        am200_init_gpio_pin(STDBY_GPIO_PIN, 0);
+        am200_set_gpio_output(STDBY_GPIO_PIN, 0);
+
+        am200_init_gpio_pin(RST_GPIO_PIN, 0);
+        am200_set_gpio_output(RST_GPIO_PIN, 0);
+
+        am200_init_gpio_pin(RDY_GPIO_PIN, 1);
+
+        am200_init_gpio_pin(ERR_GPIO_PIN, 1);
+
+        am200_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
+        am200_set_gpio_output(PCBPWR_GPIO_PIN, 0);
+}
+
+static void am200_disable_lcd_controller(struct metronomefb_par *par)
+{
+        LCSR = 0xffffffff;      /* Clear LCD Status Register */
+        LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
+
+        /* we reset and just wait for things to settle */
+        msleep(200);
+}
+
+static void am200_enable_lcd_controller(struct metronomefb_par *par)
+{
+        LCSR = 0xffffffff;
+        FDADR0 = par->metromem_desc_dma;
+        LCCR0 |= LCCR0_ENB;
+}
+
+static void am200_init_lcdc_regs(struct metronomefb_par *par)
+{
+        /* here we do:
+        - disable the lcd controller
+        - setup lcd control registers
+        - setup dma descriptor
+        - reenable lcd controller
+        */
+
+        /* disable the lcd controller */
+        am200_disable_lcd_controller(par);
+
+        /* setup lcd control registers */
+        LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
+                | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
+
+        LCCR1 = (par->info->var.xres/2 - 1) /* pixels per line */
+                | (27 << 10) /* hsync pulse width - 1 */
+                | (33 << 16) /* eol pixel count */
+                | (33 << 24); /* bol pixel count */
+
+        LCCR2 = (par->info->var.yres - 1) /* lines per panel */
+                | (24 << 10) /* vsync pulse width - 1 */
+                | (2 << 16) /* eof pixel count */
+                | (0 << 24); /* bof pixel count */
+
+        LCCR3 = 2 /* pixel clock divisor */
+                | (24 << 8) /* AC Bias pin freq */
+                | LCCR3_16BPP /* BPP */
+                | LCCR3_PCP;  /* PCP falling edge */
+
+}
+
+static void am200_post_dma_setup(struct metronomefb_par *par)
+{
+        par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
+        par->metromem_desc->mFSADR0 = par->metromem_dma;
+        par->metromem_desc->mFIDR0 = 0;
+        par->metromem_desc->mLDCMD0 = par->info->var.xres
+                                        * par->info->var.yres;
+        am200_enable_lcd_controller(par);
+}
+
+static void am200_free_irq(struct fb_info *info)
+{
+        free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+        struct fb_info *info = dev_id;
+        struct metronomefb_par *par = info->par;
+
+        wake_up_interruptible(&par->waitq);
+        return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+        int retval;
+
+        retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+                                IRQF_DISABLED, "AM200", info);
+        if (retval) {
+                printk(KERN_ERR "am200epd: request_irq failed: %d\n", retval);
+                return retval;
+        }
+
+        return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+        am200_set_gpio_output(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+        am200_set_gpio_output(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+        return wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+        return wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+}
+
+static struct metronome_board am200_board = {
+        .owner                  = THIS_MODULE,
+        .free_irq               = am200_free_irq,
+        .setup_irq              = am200_setup_irq,
+        .init_gpio_regs         = am200_init_gpio_regs,
+        .init_lcdc_regs         = am200_init_lcdc_regs,
+        .post_dma_setup         = am200_post_dma_setup,
+        .set_rst                = am200_set_rst,
+        .set_stdby              = am200_set_stdby,
+        .met_wait_event         = am200_wait_event,
+        .met_wait_event_intr    = am200_wait_event_intr,
+};
+
+static struct platform_device *am200_device;
+
+static int __init am200_init(void)
+{
+        int ret;
+
+        /* request our platform independent driver */
+        request_module("metronomefb");
+
+        am200_device = platform_device_alloc("metronomefb", -1);
+        if (!am200_device)
+                return -ENOMEM;
+
+        platform_device_add_data(am200_device, &am200_board,
+                                        sizeof(am200_board));
+
+        /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+        ret = platform_device_add(am200_device);
+
+        if (ret)
+                platform_device_put(am200_device);
+
+        return ret;
+}
+
+static void __exit am200_exit(void)
+{
+        platform_device_unregister(am200_device);
+}
+
+module_init(am200_init);
+module_exit(am200_exit);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index 5602f3e3f919..17066dd5a190 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -13,12 +13,10 @@
  * Corporation. http://support.eink.com/community
  *
  * This driver is written to be used with the Metronome display controller.
- * It was tested with an E-Ink 800x600 Vizplex EPD on a Gumstix Connex board
- * using the Lyre interface board.
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions. An example
+ * is provided as am200epd.c
  *
- * General notes:
- * - User must set metronomefb_enable=1 to enable it.
- * - See Documentation/fb/metronomefb.txt for how metronome works.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -38,9 +36,11 @@
 #include <linux/uaccess.h>
 #include <linux/irq.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <video/metronomefb.h>
+
 #include <asm/unaligned.h>
 
+
 #define DEBUG 1
 #ifdef DEBUG
 #define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
@@ -53,35 +53,6 @@
 #define DPY_W 832
 #define DPY_H 622
 
-struct metromem_desc {
-        u32 mFDADR0;
-        u32 mFSADR0;
-        u32 mFIDR0;
-        u32 mLDCMD0;
-};
-
-struct metromem_cmd {
-        u16 opcode;
-        u16 args[((64-2)/2)];
-        u16 csum;
-};
-
-struct metronomefb_par {
-        unsigned char *metromem;
-        struct metromem_desc *metromem_desc;
-        struct metromem_cmd *metromem_cmd;
-        unsigned char *metromem_wfm;
-        unsigned char *metromem_img;
-        u16 *metromem_img_csum;
-        u16 *csum_table;
-        int metromemsize;
-        dma_addr_t metromem_dma;
-        dma_addr_t metromem_desc_dma;
-        struct fb_info *info;
-        wait_queue_head_t waitq;
-        u8 frame_count;
-};
-
 /* frame differs from image. frame includes non-visible pixels */
 struct epd_frame {
         int fw; /* frame width */
@@ -120,8 +91,7 @@ static struct fb_var_screeninfo metronomefb_var __devinitdata = {
         .transp =       { 0, 0, 0 },
 };
 
-static unsigned int metronomefb_enable;
-
+/* the waveform structure that is coming from userspace firmware */
 struct waveform_hdr {
         u8 stuff[32];
 
@@ -301,165 +271,6 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
         return 0;
 }
 
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-
-#define AF_SEL_GPIO_N 0x3
-#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
-#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
-#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
-#define GPDR1_OFFSET(pin) (pin - 32)
-#define GPCR1_OFFSET(pin) (pin - 32)
-#define GPSR1_OFFSET(pin) (pin - 32)
-#define GPCR0_OFFSET(pin) (pin)
-#define GPSR0_OFFSET(pin) (pin)
-
-static void metronome_set_gpio_output(int pin, int val)
-{
-        u8 index;
-
-        index = pin >> 4;
-
-        switch (index) {
-        case 1:
-                if (val)
-                        GPSR0 |= (1 << GPSR0_OFFSET(pin));
-                else
-                        GPCR0 |= (1 << GPCR0_OFFSET(pin));
-                break;
-        case 2:
-                break;
-        case 3:
-                if (val)
-                        GPSR1 |= (1 << GPSR1_OFFSET(pin));
-                else
-                        GPCR1 |= (1 << GPCR1_OFFSET(pin));
-                break;
-        default:
-                printk(KERN_ERR "unimplemented\n");
-        }
-}
-
-static void __devinit metronome_init_gpio_pin(int pin, int dir)
-{
-        u8 index;
-        /* dir 0 is output, 1 is input
-        - do 2 things here:
-        - set gpio alternate function to standard gpio
-        - set gpio direction to input or output  */
-
-        index = pin >> 4;
-        switch (index) {
-        case 1:
-                GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
-
-                if (dir)
-                        GPDR0 &= ~(1 << pin);
-                else
-                        GPDR0 |= (1 << pin);
-                break;
-        case 2:
-                GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
-
-                if (dir)
-                        GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
-                else
-                        GPDR1 |= (1 << GPDR1_OFFSET(pin));
-                break;
-        case 3:
-                GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
-
-                if (dir)
-                        GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
-                else
-                        GPDR1 |= (1 << GPDR1_OFFSET(pin));
-                break;
-        default:
-                printk(KERN_ERR "unimplemented\n");
-        }
-}
-
-static void __devinit metronome_init_gpio_regs(void)
-{
-        metronome_init_gpio_pin(LED_GPIO_PIN, 0);
-        metronome_set_gpio_output(LED_GPIO_PIN, 0);
-
-        metronome_init_gpio_pin(STDBY_GPIO_PIN, 0);
-        metronome_set_gpio_output(STDBY_GPIO_PIN, 0);
-
-        metronome_init_gpio_pin(RST_GPIO_PIN, 0);
-        metronome_set_gpio_output(RST_GPIO_PIN, 0);
-
-        metronome_init_gpio_pin(RDY_GPIO_PIN, 1);
-
-        metronome_init_gpio_pin(ERR_GPIO_PIN, 1);
-
-        metronome_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
-        metronome_set_gpio_output(PCBPWR_GPIO_PIN, 0);
-}
-
-static void metronome_disable_lcd_controller(struct metronomefb_par *par)
-{
-        LCSR = 0xffffffff;      /* Clear LCD Status Register */
-        LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
-
-        /* we reset and just wait for things to settle */
-        msleep(200);
-}
-
-static void metronome_enable_lcd_controller(struct metronomefb_par *par)
-{
-        LCSR = 0xffffffff;
-        FDADR0 = par->metromem_desc_dma;
-        LCCR0 |= LCCR0_ENB;
-}
-
-static void __devinit metronome_init_lcdc_regs(struct metronomefb_par *par)
-{
-        /* here we do:
-        - disable the lcd controller
-        - setup lcd control registers
-        - setup dma descriptor
-        - reenable lcd controller
-        */
-
-        /* disable the lcd controller */
-        metronome_disable_lcd_controller(par);
-
-        /* setup lcd control registers */
-        LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
-                | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
-
-        LCCR1 = (epd_frame_table[0].fw/2 - 1) /* pixels per line */
-                | (27 << 10) /* hsync pulse width - 1 */
-                | (33 << 16) /* eol pixel count */
-                | (33 << 24); /* bol pixel count */
-
-        LCCR2 = (epd_frame_table[0].fh - 1) /* lines per panel */
-                | (24 << 10) /* vsync pulse width - 1 */
-                | (2 << 16) /* eof pixel count */
-                | (0 << 24); /* bof pixel count */
-
-        LCCR3 = 2 /* pixel clock divisor */
-                | (24 << 8) /* AC Bias pin freq */
-                | LCCR3_16BPP /* BPP */
-                | LCCR3_PCP;  /* PCP falling edge */
-
-        /* setup dma descriptor */
-        par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
-        par->metromem_desc->mFSADR0 = par->metromem_dma;
-        par->metromem_desc->mFIDR0 = 0;
-        par->metromem_desc->mLDCMD0 = epd_frame_table[0].fw
-                                        * epd_frame_table[0].fh;
-        /* reenable lcd controller */
-        metronome_enable_lcd_controller(par);
-}
-
 static int metronome_display_cmd(struct metronomefb_par *par)
 {
         int i;
@@ -493,8 +304,7 @@ static int metronome_display_cmd(struct metronomefb_par *par)
         par->metromem_cmd->csum = cs;
         par->metromem_cmd->opcode = opcode; /* display cmd */
 
-        i = wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-        return i;
+        return par->board->met_wait_event_intr(par);
 }
 
 static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
@@ -518,13 +328,12 @@ static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
         par->metromem_cmd->csum = cs;
 
         msleep(1);
-        metronome_set_gpio_output(RST_GPIO_PIN, 1);
+        par->board->set_rst(par, 1);
 
         msleep(1);
-        metronome_set_gpio_output(STDBY_GPIO_PIN, 1);
+        par->board->set_stdby(par, 1);
 
-        i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-        return i;
+        return par->board->met_wait_event(par);
 }
 
 static int __devinit metronome_config_cmd(struct metronomefb_par *par)
@@ -569,8 +378,7 @@ static int __devinit metronome_config_cmd(struct metronomefb_par *par)
         par->metromem_cmd->csum = cs;
         par->metromem_cmd->opcode = 0xCC10; /* config cmd */
 
-        i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-        return i;
+        return par->board->met_wait_event(par);
 }
 
 static int __devinit metronome_init_cmd(struct metronomefb_par *par)
@@ -596,16 +404,19 @@ static int __devinit metronome_init_cmd(struct metronomefb_par *par)
         par->metromem_cmd->csum = cs;
         par->metromem_cmd->opcode = 0xCC20; /* init cmd */
 
-        i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-        return i;
+        return par->board->met_wait_event(par);
 }
 
 static int __devinit metronome_init_regs(struct metronomefb_par *par)
 {
         int res;
 
-        metronome_init_gpio_regs();
-        metronome_init_lcdc_regs(par);
+        par->board->init_gpio_regs(par);
+
+        par->board->init_lcdc_regs(par);
+
+        /* now that lcd is setup, setup dma descriptor */
+        par->board->post_dma_setup(par);
 
         res = metronome_powerup_cmd(par);
         if (res)
@@ -616,8 +427,6 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par)
                 return res;
 
         res = metronome_init_cmd(par);
-        if (res)
-                return res;
 
         return res;
 }
@@ -632,7 +441,7 @@ static void metronomefb_dpy_update(struct metronomefb_par *par)
 
         cksum = calc_img_cksum((u16 *) par->metromem_img,
                                 (epd_frame_table[0].fw * DPY_H)/2);
-        *((u16 *) (par->metromem_img) +
+        *((u16 *)(par->metromem_img) +
                         (epd_frame_table[0].fw * DPY_H)/2) = cksum;
         metronome_display_cmd(par);
 }
@@ -641,8 +450,8 @@ static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index)
 {
         int i;
         u16 csum = 0;
-        u16 *buf = (u16 __force *) (par->info->screen_base + index);
-        u16 *img = (u16 *) (par->metromem_img + index);
+        u16 *buf = (u16 __force *)(par->info->screen_base + index);
+        u16 *img = (u16 *)(par->metromem_img + index);
 
         /* swizzle from vm to metromem and recalc cksum at the same time*/
         for (i = 0; i < PAGE_SIZE/2; i++) {
@@ -733,7 +542,7 @@ static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf,
                 count = total_size - p;
         }
 
-        dst = (void __force *) (info->screen_base + p);
+        dst = (void __force *)(info->screen_base + p);
 
         if (copy_from_user(dst, buf, count))
                 err = -EFAULT;
@@ -759,18 +568,10 @@ static struct fb_deferred_io metronomefb_defio = {
         .deferred_io    = metronomefb_dpy_deferred_io,
 };
 
-static irqreturn_t metronome_handle_irq(int irq, void *dev_id)
-{
-        struct fb_info *info = dev_id;
-        struct metronomefb_par *par = info->par;
-
-        wake_up_interruptible(&par->waitq);
-        return IRQ_HANDLED;
-}
-
 static int __devinit metronomefb_probe(struct platform_device *dev)
 {
         struct fb_info *info;
+        struct metronome_board *board;
         int retval = -ENOMEM;
         int videomemorysize;
         unsigned char *videomemory;
@@ -779,17 +580,26 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
         int cmd_size, wfm_size, img_size, padding_size, totalsize;
         int i;
 
+        /* pick up board specific routines */
+        board = dev->dev.platform_data;
+        if (!board)
+                return -EINVAL;
+
+        /* try to count device specific driver, if can't, platform recalls */
+        if (!try_module_get(board->owner))
+                return -ENODEV;
+
         /* we have two blocks of memory.
         info->screen_base which is vm, and is the fb used by apps.
         par->metromem which is physically contiguous memory and
         contains the display controller commands, waveform,
         processed image data and padding. this is the data pulled
-        by the pxa255's LCD controller and pushed to Metronome */
+        by the device's LCD controller and pushed to Metronome */
 
         videomemorysize = (DPY_W*DPY_H);
         videomemory = vmalloc(videomemorysize);
         if (!videomemory)
-                return retval;
+                return -ENOMEM;
 
         memset(videomemory, 0, videomemorysize);
 
@@ -797,7 +607,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
         if (!info)
                 goto err_vfree;
 
-        info->screen_base = (char __iomem *) videomemory;
+        info->screen_base = (char __force __iomem *)videomemory;
         info->fbops = &metronomefb_ops;
 
         info->var = metronomefb_var;
@@ -805,6 +615,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
         info->fix.smem_len = videomemorysize;
         par = info->par;
         par->info = info;
+        par->board = board;
         init_waitqueue_head(&par->waitq);
 
         /* this table caches per page csum values. */
@@ -849,11 +660,10 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
         par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
                                  + img_size + padding_size;
 
-        /* load the waveform in. assume mode 3, temp 31 for now */
-        /*      a) request the waveform file from userspace
+        /* load the waveform in. assume mode 3, temp 31 for now
+                a) request the waveform file from userspace
                 b) process waveform and decode into metromem */
-
-        retval = request_firmware(&fw_entry, "waveform.wbf", &dev->dev);
+        retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
         if (retval < 0) {
                 printk(KERN_ERR "metronomefb: couldn't get waveform\n");
                 goto err_dma_free;
@@ -867,13 +677,8 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
         }
         release_firmware(fw_entry);
 
-        retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), metronome_handle_irq,
-                                IRQF_DISABLED, "Metronome", info);
-        if (retval) {
-                dev_err(&dev->dev, "request_irq failed: %d\n", retval);
+        if (board->setup_irq(info))
                 goto err_ld_wfm;
-        }
-        set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
 
         retval = metronome_init_regs(par);
         if (retval < 0)
@@ -913,7 +718,7 @@ err_cmap:
 err_fb_rel:
         framebuffer_release(info);
 err_free_irq:
-        free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+        board->free_irq(info);
 err_ld_wfm:
         release_firmware(fw_entry);
 err_dma_free:
@@ -923,6 +728,7 @@ err_csum_table:
         vfree(par->csum_table);
 err_vfree:
         vfree(videomemory);
+        module_put(board->owner);
         return retval;
 }
 
@@ -939,7 +745,8 @@ static int __devexit metronomefb_remove(struct platform_device *dev)
                 vfree(par->csum_table);
                 unregister_framebuffer(info);
                 vfree((void __force *)info->screen_base);
-                free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+                par->board->free_irq(info);
+                module_put(par->board->owner);
                 framebuffer_release(info);
         }
         return 0;
@@ -949,48 +756,21 @@ static struct platform_driver metronomefb_driver = {
         .probe  = metronomefb_probe,
         .remove = metronomefb_remove,
         .driver = {
+                .owner  = THIS_MODULE,
                 .name   = "metronomefb",
         },
 };
 
-static struct platform_device *metronomefb_device;
-
 static int __init metronomefb_init(void)
 {
-        int ret;
-
-        if (!metronomefb_enable) {
-                printk(KERN_ERR
-                        "Use metronomefb_enable to enable the device\n");
-                return -ENXIO;
-        }
-
-        ret = platform_driver_register(&metronomefb_driver);
-        if (!ret) {
-                metronomefb_device = platform_device_alloc("metronomefb", 0);
-                if (metronomefb_device)
-                        ret = platform_device_add(metronomefb_device);
-                else
-                        ret = -ENOMEM;
-
-                if (ret) {
-                        platform_device_put(metronomefb_device);
-                        platform_driver_unregister(&metronomefb_driver);
-                }
-        }
-        return ret;
-
+        return platform_driver_register(&metronomefb_driver);
 }
 
 static void __exit metronomefb_exit(void)
 {
-        platform_device_unregister(metronomefb_device);
         platform_driver_unregister(&metronomefb_driver);
 }
 
-module_param(metronomefb_enable, uint, 0);
-MODULE_PARM_DESC(metronomefb_enable, "Enable communication with Metronome");
-
 module_init(metronomefb_init);
 module_exit(metronomefb_exit);