drivers/block: Use DIV_ROUND_UP

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression n,d;
@@

(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

3 files changed, 9 insertions, 9 deletions

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b73116ef9236..1e1f9153000c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3460,8 +3460,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
                hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
 
         hba[i]->cmd_pool_bits =
-            kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
-                      1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
+            kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+                        * sizeof(unsigned long), GFP_KERNEL);
         hba[i]->cmd_pool = (CommandList_struct *)
             pci_alloc_consistent(hba[i]->pdev,
                     hba[i]->nr_cmds * sizeof(CommandList_struct),
@@ -3493,8 +3493,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
         /* command and error info recs zeroed out before
            they are used */
         memset(hba[i]->cmd_pool_bits, 0,
-               ((hba[i]->nr_cmds + BITS_PER_LONG -
-                 1) / BITS_PER_LONG) * sizeof(unsigned long));
+               DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+                        * sizeof(unsigned long));
 
         hba[i]->num_luns = 0;
         hba[i]->highest_lun = -1;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 09c14341e6e3..3d967525e9a9 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -424,7 +424,7 @@ static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev)
                 hba[i]->pci_dev, NR_CMDS * sizeof(cmdlist_t),
                 &(hba[i]->cmd_pool_dhandle));
         hba[i]->cmd_pool_bits = kcalloc(
-                (NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG, sizeof(unsigned long),
+                DIV_ROUND_UP(NR_CMDS, BITS_PER_LONG), sizeof(unsigned long),
                 GFP_KERNEL);
 
         if (!hba[i]->cmd_pool_bits || !hba[i]->cmd_pool)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 395f8ea7981c..9c0b494f5e87 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1355,20 +1355,20 @@ static void fdc_specify(void)
         }
 
         /* Convert step rate from microseconds to milliseconds and 4 bits */
-        srt = 16 - (DP->srt * scale_dtr / 1000 + NOMINAL_DTR - 1) / NOMINAL_DTR;
+        srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
         if (slow_floppy) {
                 srt = srt / 4;
         }
         SUPBOUND(srt, 0xf);
         INFBOUND(srt, 0);
 
-        hlt = (DP->hlt * scale_dtr / 2 + NOMINAL_DTR - 1) / NOMINAL_DTR;
+        hlt = DIV_ROUND_UP(DP->hlt * scale_dtr / 2, NOMINAL_DTR);
         if (hlt < 0x01)
                 hlt = 0x01;
         else if (hlt > 0x7f)
                 hlt = hlt_max_code;
 
-        hut = (DP->hut * scale_dtr / 16 + NOMINAL_DTR - 1) / NOMINAL_DTR;
+        hut = DIV_ROUND_UP(DP->hut * scale_dtr / 16, NOMINAL_DTR);
         if (hut < 0x1)
                 hut = 0x1;
         else if (hut > 0xf)
@@ -2385,7 +2385,7 @@ static void rw_interrupt(void)
 
 #ifdef FLOPPY_SANITY_CHECK
         if (nr_sectors / ssize >
-            (in_sector_offset + current_count_sectors + ssize - 1) / ssize) {
+            DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
                 DPRINT("long rw: %x instead of %lx\n",
                        nr_sectors, current_count_sectors);
                 printk("rs=%d s=%d\n", R_SECTOR, SECTOR);