[SCSI] ipr: Handle new SAS error codes

Add definitions for some SAS error codes that can be
logged by ipr SAS adapters.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 28 insertions, 0 deletions

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 01080b3acf5e..7f2c5cfc57ba 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -175,6 +175,8 @@ struct ipr_error_table_t ipr_error_table[] = {
         "Qualified success"},
         {0x01080000, 1, 1,
         "FFFE: Soft device bus error recovered by the IOA"},
+        {0x01088100, 0, 1,
+        "4101: Soft device bus fabric error"},
         {0x01170600, 0, 1,
         "FFF9: Device sector reassign successful"},
         {0x01170900, 0, 1,
@@ -225,6 +227,8 @@ struct ipr_error_table_t ipr_error_table[] = {
         "3109: IOA timed out a device command"},
         {0x04088000, 0, 0,
         "3120: SCSI bus is not operational"},
+        {0x04088100, 0, 1,
+        "4100: Hard device bus fabric error"},
         {0x04118000, 0, 1,
         "9000: IOA reserved area data check"},
         {0x04118100, 0, 1,
@@ -273,6 +277,14 @@ struct ipr_error_table_t ipr_error_table[] = {
         "9091: Incorrect hardware configuration change has been detected"},
         {0x04678000, 0, 1,
         "9073: Invalid multi-adapter configuration"},
+        {0x04678100, 0, 1,
+        "4010: Incorrect connection between cascaded expanders"},
+        {0x04678200, 0, 1,
+        "4020: Connections exceed IOA design limits"},
+        {0x04678300, 0, 1,
+        "4030: Incorrect multipath connection"},
+        {0x04679000, 0, 1,
+        "4110: Unsupported enclosure function"},
         {0x046E0000, 0, 1,
         "FFF4: Command to logical unit failed"},
         {0x05240000, 1, 0,
@@ -297,6 +309,8 @@ struct ipr_error_table_t ipr_error_table[] = {
         "9031: Array protection temporarily suspended, protection resuming"},
         {0x06040600, 0, 1,
         "9040: Array protection temporarily suspended, protection resuming"},
+        {0x06288000, 0, 1,
+        "3140: Device bus not ready to ready transition"},
         {0x06290000, 0, 1,
         "FFFB: SCSI bus was reset"},
         {0x06290500, 0, 0,
@@ -319,6 +333,16 @@ struct ipr_error_table_t ipr_error_table[] = {
         "3150: SCSI bus configuration error"},
         {0x06678100, 0, 1,
         "9074: Asymmetric advanced function disk configuration"},
+        {0x06678300, 0, 1,
+        "4040: Incomplete multipath connection between IOA and enclosure"},
+        {0x06678400, 0, 1,
+        "4041: Incomplete multipath connection between enclosure and device"},
+        {0x06678500, 0, 1,
+        "9075: Incomplete multipath connection between IOA and remote IOA"},
+        {0x06678600, 0, 1,
+        "9076: Configuration error, missing remote IOA"},
+        {0x06679100, 0, 1,
+        "4050: Enclosure does not support a required multipath function"},
         {0x06690200, 0, 1,
         "9041: Array protection temporarily suspended"},
         {0x06698200, 0, 1,
@@ -331,6 +355,10 @@ struct ipr_error_table_t ipr_error_table[] = {
         "9072: Link not operational transition"},
         {0x066B8200, 0, 1,
         "9032: Array exposed but still protected"},
+        {0x066B9100, 0, 1,
+        "4061: Multipath redundancy level got better"},
+        {0x066B9200, 0, 1,
+        "4060: Multipath redundancy level got worse"},
         {0x07270000, 0, 0,
         "Failure due to other device"},
         {0x07278000, 0, 1,