hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller

SMSC's EMC2103 family of temperature/fan controllers have 1
onboard and up to 3 external temperature sensors, and allow
closed-loop control of one fan.  This patch adds support for
them.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

3 files changed, 751 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f3adf18bfa05..d50e9fa8016f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -804,6 +804,16 @@ config SENSORS_EMC1403
           Threshold values can be configured using sysfs.
           Data from the different diodes are accessible via sysfs.
 
+config SENSORS_EMC2103
+        tristate "SMSC EMC2103"
+        depends on I2C
+        help
+          If you say yes here you get support for the temperature
+          and fan sensors of the SMSC EMC2103 chips.
+
+          This driver can also be built as a module.  If so, the module
+          will be called emc2103.
+
 config SENSORS_SMSC47M1
         tristate "SMSC LPC47M10x and compatibles"
         help
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 13d913e34dbf..e3c2484f6c5f 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SENSORS_PKGTEMP)	+= pkgtemp.o
 obj-$(CONFIG_SENSORS_DME1737)   += dme1737.o
 obj-$(CONFIG_SENSORS_DS1621)    += ds1621.o
 obj-$(CONFIG_SENSORS_EMC1403)   += emc1403.o
+obj-$(CONFIG_SENSORS_EMC2103)   += emc2103.o
 obj-$(CONFIG_SENSORS_F71805F)   += f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)  += f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)   += f75375s.o
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
new file mode 100644
index 000000000000..af914ad93ece
--- /dev/null
+++ b/drivers/hwmon/emc2103.c
@@ -0,0 +1,740 @@
+/*
+    emc2103.c - Support for SMSC EMC2103
+    Copyright (c) 2010 SMSC
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x2E, I2C_CLIENT_END };
+
+static const u8 REG_TEMP[4] = { 0x00, 0x02, 0x04, 0x06 };
+static const u8 REG_TEMP_MIN[4] = { 0x3c, 0x38, 0x39, 0x3a };
+static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
+
+#define REG_CONF1               0x20
+#define REG_TEMP_MAX_ALARM      0x24
+#define REG_TEMP_MIN_ALARM      0x25
+#define REG_FAN_CONF1           0x42
+#define REG_FAN_TARGET_LO       0x4c
+#define REG_FAN_TARGET_HI       0x4d
+#define REG_FAN_TACH_HI         0x4e
+#define REG_FAN_TACH_LO         0x4f
+#define REG_PRODUCT_ID          0xfd
+#define REG_MFG_ID              0xfe
+
+/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */
+#define FAN_RPM_FACTOR          3932160
+
+/* 2103-2 and 2103-4's 3rd temperature sensor can be connected to two diodes
+ * in anti-parallel mode, and in this configuration both can be read
+ * independently (so we have 4 temperature inputs).  The device can't
+ * detect if it's connected in this mode, so we have to manually enable
+ * it.  Default is to leave the device in the state it's already in (-1).
+ * This parameter allows APD mode to be optionally forced on or off */
+static int apd = -1;
+module_param(apd, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
+
+struct temperature {
+        s8      degrees;
+        u8      fraction;       /* 0-7 multiples of 0.125 */
+};
+
+struct emc2103_data {
+        struct device           *hwmon_dev;
+        struct mutex            update_lock;
+        bool                    valid;          /* registers are valid */
+        bool                    fan_rpm_control;
+        int                     temp_count;     /* num of temp sensors */
+        unsigned long           last_updated;   /* in jiffies */
+        struct temperature      temp[4];        /* internal + 3 external */
+        s8                      temp_min[4];    /* no fractional part */
+        s8                      temp_max[4];    /* no fractional part */
+        u8                      temp_min_alarm;
+        u8                      temp_max_alarm;
+        u8                      fan_multiplier;
+        u16                     fan_tach;
+        u16                     fan_target;
+};
+
+static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output)
+{
+        int status = i2c_smbus_read_byte_data(client, i2c_reg);
+        if (status < 0) {
+                dev_warn(&client->dev, "reg 0x%02x, err %d\n",
+                        i2c_reg, status);
+        } else {
+                *output = status;
+        }
+        return status;
+}
+
+static void read_temp_from_i2c(struct i2c_client *client, u8 i2c_reg,
+                               struct temperature *temp)
+{
+        u8 degrees, fractional;
+
+        if (read_u8_from_i2c(client, i2c_reg, &degrees) < 0)
+                return;
+
+        if (read_u8_from_i2c(client, i2c_reg + 1, &fractional) < 0)
+                return;
+
+        temp->degrees = degrees;
+        temp->fraction = (fractional & 0xe0) >> 5;
+}
+
+static void read_fan_from_i2c(struct i2c_client *client, u16 *output,
+                              u8 hi_addr, u8 lo_addr)
+{
+        u8 high_byte, lo_byte;
+
+        if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0)
+                return;
+
+        if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0)
+                return;
+
+        *output = ((u16)high_byte << 5) | (lo_byte >> 3);
+}
+
+static void write_fan_target_to_i2c(struct i2c_client *client, u16 new_target)
+{
+        u8 high_byte = (new_target & 0x1fe0) >> 5;
+        u8 low_byte = (new_target & 0x001f) << 3;
+        i2c_smbus_write_byte_data(client, REG_FAN_TARGET_LO, low_byte);
+        i2c_smbus_write_byte_data(client, REG_FAN_TARGET_HI, high_byte);
+}
+
+static void read_fan_config_from_i2c(struct i2c_client *client)
+
+{
+        struct emc2103_data *data = i2c_get_clientdata(client);
+        u8 conf1;
+
+        if (read_u8_from_i2c(client, REG_FAN_CONF1, &conf1) < 0)
+                return;
+
+        data->fan_multiplier = 1 << ((conf1 & 0x60) >> 5);
+        data->fan_rpm_control = (conf1 & 0x80) != 0;
+}
+
+static struct emc2103_data *emc2103_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct emc2103_data *data = i2c_get_clientdata(client);
+
+        mutex_lock(&data->update_lock);
+
+        if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+            || !data->valid) {
+                int i;
+
+                for (i = 0; i < data->temp_count; i++) {
+                        read_temp_from_i2c(client, REG_TEMP[i], &data->temp[i]);
+                        read_u8_from_i2c(client, REG_TEMP_MIN[i],
+                                &data->temp_min[i]);
+                        read_u8_from_i2c(client, REG_TEMP_MAX[i],
+                                &data->temp_max[i]);
+                }
+
+                read_u8_from_i2c(client, REG_TEMP_MIN_ALARM,
+                        &data->temp_min_alarm);
+                read_u8_from_i2c(client, REG_TEMP_MAX_ALARM,
+                        &data->temp_max_alarm);
+
+                read_fan_from_i2c(client, &data->fan_tach,
+                        REG_FAN_TACH_HI, REG_FAN_TACH_LO);
+                read_fan_from_i2c(client, &data->fan_target,
+                        REG_FAN_TARGET_HI, REG_FAN_TARGET_LO);
+                read_fan_config_from_i2c(client);
+
+                data->last_updated = jiffies;
+                data->valid = true;
+        }
+
+        mutex_unlock(&data->update_lock);
+
+        return data;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int millidegrees = data->temp[nr].degrees * 1000
+                + data->temp[nr].fraction * 125;
+        return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_min(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int millidegrees = data->temp_min[nr] * 1000;
+        return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_max(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int millidegrees = data->temp_max[nr] * 1000;
+        return sprintf(buf, "%d\n", millidegrees);
+}
+
+static ssize_t
+show_temp_fault(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        bool fault = (data->temp[nr].degrees == -128);
+        return sprintf(buf, "%d\n", fault ? 1 : 0);
+}
+
+static ssize_t
+show_temp_min_alarm(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        bool alarm = data->temp_min_alarm & (1 << nr);
+        return sprintf(buf, "%d\n", alarm ? 1 : 0);
+}
+
+static ssize_t
+show_temp_max_alarm(struct device *dev, struct device_attribute *da, char *buf)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct emc2103_data *data = emc2103_update_device(dev);
+        bool alarm = data->temp_max_alarm & (1 << nr);
+        return sprintf(buf, "%d\n", alarm ? 1 : 0);
+}
+
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *da,
+                            const char *buf, size_t count)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct i2c_client *client = to_i2c_client(dev);
+        struct emc2103_data *data = i2c_get_clientdata(client);
+        long val;
+
+        int result = strict_strtol(buf, 10, &val);
+        if (result < 0)
+                return -EINVAL;
+
+        val = DIV_ROUND_CLOSEST(val, 1000);
+        if ((val < -63) || (val > 127))
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+        data->temp_min[nr] = val;
+        i2c_smbus_write_byte_data(client, REG_TEMP_MIN[nr], val);
+        mutex_unlock(&data->update_lock);
+
+        return count;
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *da,
+                            const char *buf, size_t count)
+{
+        int nr = to_sensor_dev_attr(da)->index;
+        struct i2c_client *client = to_i2c_client(dev);
+        struct emc2103_data *data = i2c_get_clientdata(client);
+        long val;
+
+        int result = strict_strtol(buf, 10, &val);
+        if (result < 0)
+                return -EINVAL;
+
+        val = DIV_ROUND_CLOSEST(val, 1000);
+        if ((val < -63) || (val > 127))
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+        data->temp_max[nr] = val;
+        i2c_smbus_write_byte_data(client, REG_TEMP_MAX[nr], val);
+        mutex_unlock(&data->update_lock);
+
+        return count;
+}
+
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *da, char *buf)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int rpm = 0;
+        if (data->fan_tach != 0)
+                rpm = (FAN_RPM_FACTOR * data->fan_multiplier) / data->fan_tach;
+        return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t
+show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int fan_div = 8 / data->fan_multiplier;
+        return sprintf(buf, "%d\n", fan_div);
+}
+
+/* Note: we also update the fan target here, because its value is
+   determined in part by the fan clock divider.  This follows the principle
+   of least surprise; the user doesn't expect the fan target to change just
+   because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
+                           const char *buf, size_t count)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        struct i2c_client *client = to_i2c_client(dev);
+        int new_range_bits, old_div = 8 / data->fan_multiplier;
+        long new_div;
+
+        int status = strict_strtol(buf, 10, &new_div);
+        if (status < 0)
+                return -EINVAL;
+
+        if (new_div == old_div) /* No change */
+                return count;
+
+        switch (new_div) {
+        case 1:
+                new_range_bits = 3;
+                break;
+        case 2:
+                new_range_bits = 2;
+                break;
+        case 4:
+                new_range_bits = 1;
+                break;
+        case 8:
+                new_range_bits = 0;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        mutex_lock(&data->update_lock);
+
+        status = i2c_smbus_read_byte_data(client, REG_FAN_CONF1);
+        if (status < 0) {
+                dev_dbg(&client->dev, "reg 0x%02x, err %d\n",
+                        REG_FAN_CONF1, status);
+                mutex_unlock(&data->update_lock);
+                return -EIO;
+        }
+        status &= 0x9F;
+        status |= (new_range_bits << 5);
+        i2c_smbus_write_byte_data(client, REG_FAN_CONF1, status);
+
+        data->fan_multiplier = 8 / new_div;
+
+        /* update fan target if high byte is not disabled */
+        if ((data->fan_target & 0x1fe0) != 0x1fe0) {
+                u16 new_target = (data->fan_target * old_div) / new_div;
+                data->fan_target = min(new_target, (u16)0x1fff);
+                write_fan_target_to_i2c(client, data->fan_target);
+        }
+
+        /* invalidate data to force re-read from hardware */
+        data->valid = false;
+
+        mutex_unlock(&data->update_lock);
+        return count;
+}
+
+static ssize_t
+show_fan_target(struct device *dev, struct device_attribute *da, char *buf)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        int rpm = 0;
+
+        /* high byte of 0xff indicates disabled so return 0 */
+        if ((data->fan_target != 0) && ((data->fan_target & 0x1fe0) != 0x1fe0))
+                rpm = (FAN_RPM_FACTOR * data->fan_multiplier)
+                        / data->fan_target;
+
+        return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t set_fan_target(struct device *dev, struct device_attribute *da,
+                              const char *buf, size_t count)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        struct i2c_client *client = to_i2c_client(dev);
+        long rpm_target;
+
+        int result = strict_strtol(buf, 10, &rpm_target);
+        if (result < 0)
+                return -EINVAL;
+
+        /* Datasheet states 16384 as maximum RPM target (table 3.2) */
+        if ((rpm_target < 0) || (rpm_target > 16384))
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+
+        if (rpm_target == 0)
+                data->fan_target = 0x1fff;
+        else
+                data->fan_target = SENSORS_LIMIT(
+                        (FAN_RPM_FACTOR * data->fan_multiplier) / rpm_target,
+                        0, 0x1fff);
+
+        write_fan_target_to_i2c(client, data->fan_target);
+
+        mutex_unlock(&data->update_lock);
+        return count;
+}
+
+static ssize_t
+show_fan_fault(struct device *dev, struct device_attribute *da, char *buf)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        bool fault = ((data->fan_tach & 0x1fe0) == 0x1fe0);
+        return sprintf(buf, "%d\n", fault ? 1 : 0);
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf)
+{
+        struct emc2103_data *data = emc2103_update_device(dev);
+        return sprintf(buf, "%d\n", data->fan_rpm_control ? 3 : 0);
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da,
+                              const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct emc2103_data *data = i2c_get_clientdata(client);
+        long new_value;
+        u8 conf_reg;
+
+        int result = strict_strtol(buf, 10, &new_value);
+        if (result < 0)
+                return -EINVAL;
+
+        mutex_lock(&data->update_lock);
+        switch (new_value) {
+        case 0:
+                data->fan_rpm_control = false;
+                break;
+        case 3:
+                data->fan_rpm_control = true;
+                break;
+        default:
+                mutex_unlock(&data->update_lock);
+                return -EINVAL;
+        }
+
+        read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+
+        if (data->fan_rpm_control)
+                conf_reg |= 0x80;
+        else
+                conf_reg &= ~0x80;
+
+        i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
+
+        mutex_unlock(&data->update_lock);
+        return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp_min,
+        set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
+        set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_temp_min_alarm,
+        NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_temp_max_alarm,
+        NULL, 0);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, show_temp_min,
+        set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+        set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_temp_min_alarm,
+        NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_temp_max_alarm,
+        NULL, 1);
+
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR, show_temp_min,
+        set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+        set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_temp_min_alarm,
+        NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_temp_max_alarm,
+        NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO | S_IWUSR, show_temp_min,
+        set_temp_min, 3);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
+        set_temp_max, 3);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_temp_min_alarm,
+        NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_temp_max_alarm,
+        NULL, 3);
+
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div, set_fan_div);
+static DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR, show_fan_target,
+        set_fan_target);
+static DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL);
+
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+        set_pwm_enable);
+
+/* sensors present on all models */
+static struct attribute *emc2103_attributes[] = {
+        &sensor_dev_attr_temp1_input.dev_attr.attr,
+        &sensor_dev_attr_temp1_min.dev_attr.attr,
+        &sensor_dev_attr_temp1_max.dev_attr.attr,
+        &sensor_dev_attr_temp1_fault.dev_attr.attr,
+        &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp2_input.dev_attr.attr,
+        &sensor_dev_attr_temp2_min.dev_attr.attr,
+        &sensor_dev_attr_temp2_max.dev_attr.attr,
+        &sensor_dev_attr_temp2_fault.dev_attr.attr,
+        &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+        &dev_attr_fan1_input.attr,
+        &dev_attr_fan1_div.attr,
+        &dev_attr_fan1_target.attr,
+        &dev_attr_fan1_fault.attr,
+        &dev_attr_pwm1_enable.attr,
+        NULL
+};
+
+/* extra temperature sensors only present on 2103-2 and 2103-4 */
+static struct attribute *emc2103_attributes_temp3[] = {
+        &sensor_dev_attr_temp3_input.dev_attr.attr,
+        &sensor_dev_attr_temp3_min.dev_attr.attr,
+        &sensor_dev_attr_temp3_max.dev_attr.attr,
+        &sensor_dev_attr_temp3_fault.dev_attr.attr,
+        &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+        NULL
+};
+
+/* extra temperature sensors only present on 2103-2 and 2103-4 in APD mode */
+static struct attribute *emc2103_attributes_temp4[] = {
+        &sensor_dev_attr_temp4_input.dev_attr.attr,
+        &sensor_dev_attr_temp4_min.dev_attr.attr,
+        &sensor_dev_attr_temp4_max.dev_attr.attr,
+        &sensor_dev_attr_temp4_fault.dev_attr.attr,
+        &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+        NULL
+};
+
+static const struct attribute_group emc2103_group = {
+        .attrs = emc2103_attributes,
+};
+
+static const struct attribute_group emc2103_temp3_group = {
+        .attrs = emc2103_attributes_temp3,
+};
+
+static const struct attribute_group emc2103_temp4_group = {
+        .attrs = emc2103_attributes_temp4,
+};
+
+static int
+emc2103_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+        struct emc2103_data *data;
+        int status;
+
+        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -EIO;
+
+        data = kzalloc(sizeof(struct emc2103_data), GFP_KERNEL);
+        if (!data)
+                return -ENOMEM;
+
+        i2c_set_clientdata(client, data);
+        mutex_init(&data->update_lock);
+
+        /* 2103-2 and 2103-4 have 3 external diodes, 2103-1 has 1 */
+        status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID);
+        if (status == 0x24) {
+                /* 2103-1 only has 1 external diode */
+                data->temp_count = 2;
+        } else {
+                /* 2103-2 and 2103-4 have 3 or 4 external diodes */
+                status = i2c_smbus_read_byte_data(client, REG_CONF1);
+                if (status < 0) {
+                        dev_dbg(&client->dev, "reg 0x%02x, err %d\n", REG_CONF1,
+                                status);
+                        goto exit_free;
+                }
+
+                /* detect current state of hardware */
+                data->temp_count = (status & 0x01) ? 4 : 3;
+
+                /* force APD state if module parameter is set */
+                if (apd == 0) {
+                        /* force APD mode off */
+                        data->temp_count = 3;
+                        status &= ~(0x01);
+                        i2c_smbus_write_byte_data(client, REG_CONF1, status);
+                } else if (apd == 1) {
+                        /* force APD mode on */
+                        data->temp_count = 4;
+                        status |= 0x01;
+                        i2c_smbus_write_byte_data(client, REG_CONF1, status);
+                }
+        }
+
+        /* Register sysfs hooks */
+        status = sysfs_create_group(&client->dev.kobj, &emc2103_group);
+        if (status)
+                goto exit_free;
+
+        if (data->temp_count >= 3) {
+                status = sysfs_create_group(&client->dev.kobj,
+                        &emc2103_temp3_group);
+                if (status)
+                        goto exit_remove;
+        }
+
+        if (data->temp_count == 4) {
+                status = sysfs_create_group(&client->dev.kobj,
+                        &emc2103_temp4_group);
+                if (status)
+                        goto exit_remove_temp3;
+        }
+
+        data->hwmon_dev = hwmon_device_register(&client->dev);
+        if (IS_ERR(data->hwmon_dev)) {
+                status = PTR_ERR(data->hwmon_dev);
+                goto exit_remove_temp4;
+        }
+
+        dev_info(&client->dev, "%s: sensor '%s'\n",
+                 dev_name(data->hwmon_dev), client->name);
+
+        return 0;
+
+exit_remove_temp4:
+        if (data->temp_count == 4)
+                sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
+exit_remove_temp3:
+        if (data->temp_count >= 3)
+                sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
+exit_remove:
+        sysfs_remove_group(&client->dev.kobj, &emc2103_group);
+exit_free:
+        kfree(data);
+        return status;
+}
+
+static int emc2103_remove(struct i2c_client *client)
+{
+        struct emc2103_data *data = i2c_get_clientdata(client);
+
+        hwmon_device_unregister(data->hwmon_dev);
+
+        if (data->temp_count == 4)
+                sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
+
+        if (data->temp_count >= 3)
+                sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
+
+        sysfs_remove_group(&client->dev.kobj, &emc2103_group);
+
+        kfree(data);
+        return 0;
+}
+
+static const struct i2c_device_id emc2103_ids[] = {
+        { "emc2103", 0, },
+        { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, emc2103_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int
+emc2103_detect(struct i2c_client *new_client, struct i2c_board_info *info)
+{
+        struct i2c_adapter *adapter = new_client->adapter;
+        int manufacturer, product;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
+        manufacturer = i2c_smbus_read_byte_data(new_client, REG_MFG_ID);
+        if (manufacturer != 0x5D)
+                return -ENODEV;
+
+        product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID);
+        if ((product != 0x24) && (product != 0x26))
+                return -ENODEV;
+
+        strlcpy(info->type, "emc2103", I2C_NAME_SIZE);
+
+        return 0;
+}
+
+static struct i2c_driver emc2103_driver = {
+        .class          = I2C_CLASS_HWMON,
+        .driver = {
+                .name   = "emc2103",
+        },
+        .probe          = emc2103_probe,
+        .remove         = emc2103_remove,
+        .id_table       = emc2103_ids,
+        .detect         = emc2103_detect,
+        .address_list   = normal_i2c,
+};
+
+static int __init sensors_emc2103_init(void)
+{
+        return i2c_add_driver(&emc2103_driver);
+}
+
+static void __exit sensors_emc2103_exit(void)
+{
+        i2c_del_driver(&emc2103_driver);
+}
+
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC EMC2103 hwmon driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_emc2103_init);
+module_exit(sensors_emc2103_exit);