treewide: transciever/transceiver spelling fixes

Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 10 insertions, 10 deletions

diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3df1bc80f37a..3876a2478bd7 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
 
         /*
          * The R0P7780LC0011RL FPGA needs a significant delay between
-         * data read cycles, otherwise the transciever gets confused and
+         * data read cycles, otherwise the transceiver gets confused and
          * garbage is returned when the read is subsequently aborted.
          *
          * It is not sufficient to wait for BBSY.
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 48ee51bb9e50..a19228563efd 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
                         dev->irq = mca_irqmap[(pos1>>4)&0x7];
 
                         /*
-                         * XXX: Transciever selection is done
+                         * XXX: Transceiver selection is done
                          * differently on the MCA version.
                          * How to get it to select something
                          * other than external/AUI is currently
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 99e1ec02a011..19ad4606b799 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -78,7 +78,7 @@
  * Target hardware: IRWave IR320ST-2
  *
  *      The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
- *      TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ *      TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
  *      It uses a hex inverter and some discrete components to buffer and
  *      line convert the RS232 down to 5V.
  *
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be088c4ad..ab2862990a5b 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 
         /*
          * If we're ignoring the PHY then autoneg and the internal
-         * transciever are really not going to work so don't let the
+         * transceiver are really not going to work so don't let the
          * user select them.
          */
         if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a294b2..afb974b48b33 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -743,7 +743,7 @@ pci_ni8430_setup(struct serial_private *priv,
         len =  pci_resource_len(priv->dev, bar);
         p = ioremap_nocache(base, len);
 
-        /* enable the transciever */
+        /* enable the transceiver */
         writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
                p + offset + NI8430_PORTCON);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index cd16231d8c73..b01696eab068 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -88,9 +88,9 @@
 #define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
 
 #define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transceiver Interrupt
                                            Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transceiver Interrupt
                                            Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
                                            Interrupt Enable */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c71b0372786e..bcbd1aba961a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
          *   - initializes musb->xceiv, usually by otg_get_transceiver()
          *   - stops powering VBUS
          *
-         * There are various transciever configurations.  Blackfin,
+         * There are various transceiver configurations.  Blackfin,
          * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
          * external/discrete ones in various flavors (twl4030 family,
          * isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c282258e1bd..ca9b690a7e40 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
         int             ret = IRQ_NONE;
         struct isp1301  *isp = _isp;
 
-        /* update ISP1301 transciever from OTG controller */
+        /* update ISP1301 transceiver from OTG controller */
         if (otg_irq & OPRT_CHG) {
                 omap_writew(OPRT_CHG, OTG_IRQ_SRC);
                 isp1301_defer_work(isp, WORK_UPDATE_ISP);
@@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
                 omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
                 ret = IRQ_HANDLED;
 
-        /* switch driver; the transciever code activates it,
+        /* switch driver; the transceiver code activates it,
          * ungating the udc clock or resuming OHCI.
          */
         } else if (otg_irq & DRIVER_SWITCH) {