mg_disk: fold mg_disk.h into mg_disk.c

include/linux/mg_disk.h is used only by drivers/block/mg_disk.c.  No
reason to put it in a separate header.  Fold it into mg_disk.c.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 185 insertions, 1 deletions

diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 2c00ad90cd62..2c6127ee8343 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -22,10 +22,194 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/mg_disk.h>
 
 #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
 
+/* name for block device */
+#define MG_DISK_NAME "mgd"
+/* name for platform device */
+#define MG_DEV_NAME "mg_disk"
+
+#define MG_DISK_MAJ 0
+#define MG_DISK_MAX_PART 16
+#define MG_SECTOR_SIZE 512
+#define MG_MAX_SECTS 256
+
+/* Register offsets */
+#define MG_BUFF_OFFSET                  0x8000
+#define MG_STORAGE_BUFFER_SIZE          0x200
+#define MG_REG_OFFSET                   0xC000
+#define MG_REG_FEATURE                  (MG_REG_OFFSET + 2)     /* write case */
+#define MG_REG_ERROR                    (MG_REG_OFFSET + 2)     /* read case */
+#define MG_REG_SECT_CNT                 (MG_REG_OFFSET + 4)
+#define MG_REG_SECT_NUM                 (MG_REG_OFFSET + 6)
+#define MG_REG_CYL_LOW                  (MG_REG_OFFSET + 8)
+#define MG_REG_CYL_HIGH                 (MG_REG_OFFSET + 0xA)
+#define MG_REG_DRV_HEAD                 (MG_REG_OFFSET + 0xC)
+#define MG_REG_COMMAND                  (MG_REG_OFFSET + 0xE)   /* write case */
+#define MG_REG_STATUS                   (MG_REG_OFFSET + 0xE)   /* read  case */
+#define MG_REG_DRV_CTRL                 (MG_REG_OFFSET + 0x10)
+#define MG_REG_BURST_CTRL               (MG_REG_OFFSET + 0x12)
+
+/* "Drive Select/Head Register" bit values */
+#define MG_REG_HEAD_MUST_BE_ON          0xA0 /* These 2 bits are always on */
+#define MG_REG_HEAD_DRIVE_MASTER        (0x00 | MG_REG_HEAD_MUST_BE_ON)
+#define MG_REG_HEAD_DRIVE_SLAVE         (0x10 | MG_REG_HEAD_MUST_BE_ON)
+#define MG_REG_HEAD_LBA_MODE            (0x40 | MG_REG_HEAD_MUST_BE_ON)
+
+
+/* "Device Control Register" bit values */
+#define MG_REG_CTRL_INTR_ENABLE                 0x0
+#define MG_REG_CTRL_INTR_DISABLE                (0x1<<1)
+#define MG_REG_CTRL_RESET                       (0x1<<2)
+#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH       0x0
+#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW        (0x1<<4)
+#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW         0x0
+#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH        (0x1<<5)
+#define MG_REG_CTRL_DPD_DISABLE                 0x0
+#define MG_REG_CTRL_DPD_ENABLE                  (0x1<<6)
+
+/* Status register bit */
+/* error bit in status register */
+#define MG_REG_STATUS_BIT_ERROR                 0x01
+/* corrected error in status register */
+#define MG_REG_STATUS_BIT_CORRECTED_ERROR       0x04
+/* data request bit in status register */
+#define MG_REG_STATUS_BIT_DATA_REQ              0x08
+/* DSC - Drive Seek Complete */
+#define MG_REG_STATUS_BIT_SEEK_DONE             0x10
+/* DWF - Drive Write Fault */
+#define MG_REG_STATUS_BIT_WRITE_FAULT           0x20
+#define MG_REG_STATUS_BIT_READY                 0x40
+#define MG_REG_STATUS_BIT_BUSY                  0x80
+
+/* handy status */
+#define MG_STAT_READY   (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE)
+#define MG_READY_OK(s)  (((s) & (MG_STAT_READY | \
+                                (MG_REG_STATUS_BIT_BUSY | \
+                                 MG_REG_STATUS_BIT_WRITE_FAULT | \
+                                 MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY)
+
+/* Error register */
+#define MG_REG_ERR_AMNF         0x01
+#define MG_REG_ERR_ABRT         0x04
+#define MG_REG_ERR_IDNF         0x10
+#define MG_REG_ERR_UNC          0x40
+#define MG_REG_ERR_BBK          0x80
+
+/* error code for others */
+#define MG_ERR_NONE             0
+#define MG_ERR_TIMEOUT          0x100
+#define MG_ERR_INIT_STAT        0x101
+#define MG_ERR_TRANSLATION      0x102
+#define MG_ERR_CTRL_RST         0x103
+#define MG_ERR_INV_STAT         0x104
+#define MG_ERR_RSTOUT           0x105
+
+#define MG_MAX_ERRORS   6       /* Max read/write errors */
+
+/* command */
+#define MG_CMD_RD 0x20
+#define MG_CMD_WR 0x30
+#define MG_CMD_SLEEP 0x99
+#define MG_CMD_WAKEUP 0xC3
+#define MG_CMD_ID 0xEC
+#define MG_CMD_WR_CONF 0x3C
+#define MG_CMD_RD_CONF 0x40
+
+/* operation mode */
+#define MG_OP_CASCADE (1 << 0)
+#define MG_OP_CASCADE_SYNC_RD (1 << 1)
+#define MG_OP_CASCADE_SYNC_WR (1 << 2)
+#define MG_OP_INTERLEAVE (1 << 3)
+
+/* synchronous */
+#define MG_BURST_LAT_4 (3 << 4)
+#define MG_BURST_LAT_5 (4 << 4)
+#define MG_BURST_LAT_6 (5 << 4)
+#define MG_BURST_LAT_7 (6 << 4)
+#define MG_BURST_LAT_8 (7 << 4)
+#define MG_BURST_LEN_4 (1 << 1)
+#define MG_BURST_LEN_8 (2 << 1)
+#define MG_BURST_LEN_16 (3 << 1)
+#define MG_BURST_LEN_32 (4 << 1)
+#define MG_BURST_LEN_CONT (0 << 1)
+
+/* timeout value (unit: ms) */
+#define MG_TMAX_CONF_TO_CMD     1
+#define MG_TMAX_WAIT_RD_DRQ     10
+#define MG_TMAX_WAIT_WR_DRQ     500
+#define MG_TMAX_RST_TO_BUSY     10
+#define MG_TMAX_HDRST_TO_RDY    500
+#define MG_TMAX_SWRST_TO_RDY    500
+#define MG_TMAX_RSTOUT          3000
+
+/* device attribution */
+/* use mflash as boot device */
+#define MG_BOOT_DEV             (1 << 0)
+/* use mflash as storage device */
+#define MG_STORAGE_DEV          (1 << 1)
+/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
+#define MG_STORAGE_DEV_SKIP_RST (1 << 2)
+
+#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
+
+/* names of GPIO resource */
+#define MG_RST_PIN      "mg_rst"
+/* except MG_BOOT_DEV, reset-out pin should be assigned */
+#define MG_RSTOUT_PIN   "mg_rstout"
+
+/* private driver data */
+struct mg_drv_data {
+        /* disk resource */
+        u32 use_polling;
+
+        /* device attribution */
+        u32 dev_attr;
+
+        /* internally used */
+        struct mg_host *host;
+};
+
+/* main structure for mflash driver */
+struct mg_host {
+        struct device *dev;
+
+        struct request_queue *breq;
+        spinlock_t lock;
+        struct gendisk *gd;
+
+        struct timer_list timer;
+        void (*mg_do_intr) (struct mg_host *);
+
+        u16 id[ATA_ID_WORDS];
+
+        u16 cyls;
+        u16 heads;
+        u16 sectors;
+        u32 n_sectors;
+        u32 nres_sectors;
+
+        void __iomem *dev_base;
+        unsigned int irq;
+        unsigned int rst;
+        unsigned int rstout;
+
+        u32 major;
+        u32 error;
+};
+
+/*
+ * Debugging macro and defines
+ */
+#undef DO_MG_DEBUG
+#ifdef DO_MG_DEBUG
+#  define MG_DBG(fmt, args...) \
+        printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
+#else /* CONFIG_MG_DEBUG */
+#  define MG_DBG(fmt, args...) do { } while (0)
+#endif /* CONFIG_MG_DEBUG */
+
 static void mg_request(struct request_queue *);
 
 static void mg_dump_status(const char *msg, unsigned int stat,