ARM: 6458/1: pcmcia: Adds nanoEngine PCMCIA support.

This patch adds nanoEngine PCMCIA support, with support for two sockets.

In order to have a fully functional pcmcia subsystem in a BSE
nanoEngine board you should carefully read this:

http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 225 insertions, 1 deletions

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 8d9386a22eb3..a565300a19c8 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -50,8 +50,9 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720)		+= sa1100_jornada720.o
 sa1100_cs-y                                     += sa1100_generic.o
 sa1100_cs-$(CONFIG_SA1100_ASSABET)              += sa1100_assabet.o
 sa1100_cs-$(CONFIG_SA1100_CERF)                 += sa1100_cerf.o
-sa1100_cs-$(CONFIG_SA1100_COLLIE)              += pxa2xx_sharpsl.o
+sa1100_cs-$(CONFIG_SA1100_COLLIE)               += pxa2xx_sharpsl.o
 sa1100_cs-$(CONFIG_SA1100_H3600)                += sa1100_h3600.o
+sa1100_cs-$(CONFIG_SA1100_NANOENGINE)           += sa1100_nanoengine.o
 sa1100_cs-$(CONFIG_SA1100_SHANNON)              += sa1100_shannon.o
 sa1100_cs-$(CONFIG_SA1100_SIMPAD)               += sa1100_simpad.o
 
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 945857f8c284..ff8a027a4afb 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -53,6 +53,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
         pcmcia_h3600_init,
 #endif
+#ifdef CONFIG_SA1100_NANOENGINE
+        pcmcia_nanoengine_init,
+#endif
 #ifdef CONFIG_SA1100_SHANNON
         pcmcia_shannon_init,
 #endif
diff --git a/drivers/pcmcia/sa1100_generic.h b/drivers/pcmcia/sa1100_generic.h
index 794f96a35bba..adb08dbc723f 100644
--- a/drivers/pcmcia/sa1100_generic.h
+++ b/drivers/pcmcia/sa1100_generic.h
@@ -13,6 +13,7 @@ extern int pcmcia_freebird_init(struct device *);
 extern int pcmcia_gcplus_init(struct device *);
 extern int pcmcia_graphicsmaster_init(struct device *);
 extern int pcmcia_h3600_init(struct device *);
+extern int pcmcia_nanoengine_init(struct device *);
 extern int pcmcia_pangolin_init(struct device *);
 extern int pcmcia_pfs168_init(struct device *);
 extern int pcmcia_shannon_init(struct device *);
diff --git a/drivers/pcmcia/sa1100_nanoengine.c b/drivers/pcmcia/sa1100_nanoengine.c
new file mode 100644
index 000000000000..3d2652e2f5ae
--- /dev/null
+++ b/drivers/pcmcia/sa1100_nanoengine.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/pcmcia/sa1100_nanoengine.c
+ *
+ * PCMCIA implementation routines for BSI nanoEngine.
+ *
+ * In order to have a fully functional pcmcia subsystem in a BSE nanoEngine
+ * board you should carefully read this:
+ * http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * Based on original work for kernel 2.4 by
+ * Miguel Freitas <miguel@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+
+#include "sa1100_generic.h"
+
+static struct pcmcia_irqs irqs_skt0[] = {
+        /* socket, IRQ, name */
+        { 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" },
+};
+
+static struct pcmcia_irqs irqs_skt1[] = {
+        /* socket, IRQ, name */
+        { 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" },
+};
+
+struct nanoengine_pins {
+        unsigned input_pins;
+        unsigned output_pins;
+        unsigned clear_outputs;
+        unsigned transition_pins;
+        unsigned pci_irq;
+        struct pcmcia_irqs *pcmcia_irqs;
+        unsigned pcmcia_irqs_size;
+};
+
+static struct nanoengine_pins nano_skts[] = {
+        {
+                .input_pins             = GPIO_PC_READY0 | GPIO_PC_CD0,
+                .output_pins            = GPIO_PC_RESET0,
+                .clear_outputs          = GPIO_PC_RESET0,
+                .transition_pins        = NANOENGINE_IRQ_GPIO_PC_CD0,
+                .pci_irq                = NANOENGINE_IRQ_GPIO_PC_READY0,
+                .pcmcia_irqs            = irqs_skt0,
+                .pcmcia_irqs_size       = ARRAY_SIZE(irqs_skt0)
+        }, {
+                .input_pins             = GPIO_PC_READY1 | GPIO_PC_CD1,
+                .output_pins            = GPIO_PC_RESET1,
+                .clear_outputs          = GPIO_PC_RESET1,
+                .transition_pins        = NANOENGINE_IRQ_GPIO_PC_CD1,
+                .pci_irq                = NANOENGINE_IRQ_GPIO_PC_READY1,
+                .pcmcia_irqs            = irqs_skt1,
+                .pcmcia_irqs_size       = ARRAY_SIZE(irqs_skt1)
+        }
+};
+
+unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts);
+
+static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return -ENXIO;
+
+        GPDR &= ~nano_skts[i].input_pins;
+        GPDR |= nano_skts[i].output_pins;
+        GPCR = nano_skts[i].clear_outputs;
+        set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH);
+        skt->socket.pci_irq = nano_skts[i].pci_irq;
+
+        return soc_pcmcia_request_irqs(skt,
+                nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Release all resources.
+ */
+static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return;
+
+        soc_pcmcia_free_irqs(skt,
+                nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static int nanoengine_pcmcia_configure_socket(
+        struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+        unsigned reset;
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return -ENXIO;
+
+        switch (i) {
+        case 0:
+                reset = GPIO_PC_RESET0;
+                break;
+        case 1:
+                reset = GPIO_PC_RESET1;
+                break;
+        default:
+                return -ENXIO;
+        }
+
+        if (state->flags & SS_RESET)
+                GPSR = reset;
+        else
+                GPCR = reset;
+
+        return 0;
+}
+
+static void nanoengine_pcmcia_socket_state(
+        struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
+{
+        unsigned long levels = GPLR;
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return;
+
+        memset(state, 0, sizeof(struct pcmcia_state));
+        switch (i) {
+        case 0:
+                state->ready = (levels & GPIO_PC_READY0) ? 1 : 0;
+                state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0;
+                break;
+        case 1:
+                state->ready = (levels & GPIO_PC_READY1) ? 1 : 0;
+                state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0;
+                break;
+        default:
+                return;
+        }
+        state->bvd1 = 1;
+        state->bvd2 = 1;
+        state->wrprot = 0; /* Not available */
+        state->vs_3v = 1; /* Can only apply 3.3V */
+        state->vs_Xv = 0;
+}
+
+/*
+ * Enable card status IRQs on (re-)initialisation.  This can
+ * be called at initialisation, power management event, or
+ * pcmcia event.
+ */
+static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return;
+
+        soc_pcmcia_enable_irqs(skt,
+                nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Disable card status IRQs on suspend.
+ */
+static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+        unsigned i = skt->nr;
+
+        if (i >= num_nano_pcmcia_sockets)
+                return;
+
+        soc_pcmcia_disable_irqs(skt,
+                nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static struct pcmcia_low_level nanoengine_pcmcia_ops = {
+        .owner                  = THIS_MODULE,
+
+        .hw_init                = nanoengine_pcmcia_hw_init,
+        .hw_shutdown            = nanoengine_pcmcia_hw_shutdown,
+
+        .configure_socket       = nanoengine_pcmcia_configure_socket,
+        .socket_state           = nanoengine_pcmcia_socket_state,
+        .socket_init            = nanoengine_pcmcia_socket_init,
+        .socket_suspend         = nanoengine_pcmcia_socket_suspend,
+};
+
+int pcmcia_nanoengine_init(struct device *dev)
+{
+        int ret = -ENODEV;
+
+        if (machine_is_nanoengine())
+                ret = sa11xx_drv_pcmcia_probe(
+                        dev, &nanoengine_pcmcia_ops, 0, 2);
+
+        return ret;
+}
+