MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 910 insertions, 0 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 03422ce878cf..e70712044a7e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1458,4 +1458,23 @@ config SERIAL_TIMBERDALE
         ---help---
         Add support for UART controller on timberdale.
 
+config SERIAL_BCM63XX
+        tristate "bcm63xx serial port support"
+        select SERIAL_CORE
+        depends on BCM63XX
+        help
+          If you have a bcm63xx CPU, you can enable its onboard
+          serial port by enabling this options.
+
+          To compile this driver as a module, choose M here: the
+          module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+        bool "Console on bcm63xx serial port"
+        depends on SERIAL_BCM63XX=y
+        select SERIAL_CORE_CONSOLE
+        help
+          If you have enabled the serial port on the bcm63xx CPU
+          you can make it the console by answering Y to this option.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 97f6fcc8b432..d21d5dd5d048 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
 obj-$(CONFIG_SERIAL_PXA) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
new file mode 100644
index 000000000000..beddaa6e9069
--- /dev/null
+++ b/drivers/serial/bcm63xx_uart.c
@@ -0,0 +1,890 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from many drivers using generic_serial interface.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ *  Serial driver for BCM63xx integrated UART.
+ *
+ * Hardware flow control was _not_ tested since I only have RX/TX on
+ * my board.
+ */
+
+#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <bcm63xx_clk.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+#define BCM63XX_NR_UARTS        1
+
+static struct uart_port ports[BCM63XX_NR_UARTS];
+
+/*
+ * rx interrupt mask / stat
+ *
+ * mask:
+ *  - rx fifo full
+ *  - rx fifo above threshold
+ *  - rx fifo not empty for too long
+ */
+#define UART_RX_INT_MASK        (UART_IR_MASK(UART_IR_RXOVER) |         \
+                                UART_IR_MASK(UART_IR_RXTHRESH) |        \
+                                UART_IR_MASK(UART_IR_RXTIMEOUT))
+
+#define UART_RX_INT_STAT        (UART_IR_STAT(UART_IR_RXOVER) |         \
+                                UART_IR_STAT(UART_IR_RXTHRESH) |        \
+                                UART_IR_STAT(UART_IR_RXTIMEOUT))
+
+/*
+ * tx interrupt mask / stat
+ *
+ * mask:
+ * - tx fifo empty
+ * - tx fifo below threshold
+ */
+#define UART_TX_INT_MASK        (UART_IR_MASK(UART_IR_TXEMPTY) |        \
+                                UART_IR_MASK(UART_IR_TXTRESH))
+
+#define UART_TX_INT_STAT        (UART_IR_STAT(UART_IR_TXEMPTY) |        \
+                                UART_IR_STAT(UART_IR_TXTRESH))
+
+/*
+ * external input interrupt
+ *
+ * mask: any edge on CTS, DCD
+ */
+#define UART_EXTINP_INT_MASK    (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
+                                 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int bcm_uart_readl(struct uart_port *port,
+                                         unsigned int offset)
+{
+        return bcm_readl(port->membase + offset);
+}
+
+static inline void bcm_uart_writel(struct uart_port *port,
+                                  unsigned int value, unsigned int offset)
+{
+        bcm_writel(value, port->membase + offset);
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int bcm_uart_tx_empty(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_IR_REG);
+        return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_MCTL_REG);
+        val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
+        /* invert of written value is reflected on the pin */
+        if (!(mctrl & TIOCM_DTR))
+                val |= UART_MCTL_DTR_MASK;
+        if (!(mctrl & TIOCM_RTS))
+                val |= UART_MCTL_RTS_MASK;
+        bcm_uart_writel(port, val, UART_MCTL_REG);
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        if (mctrl & TIOCM_LOOP)
+                val |= UART_CTL_LOOPBACK_MASK;
+        else
+                val &= ~UART_CTL_LOOPBACK_MASK;
+        bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
+{
+        unsigned int val, mctrl;
+
+        mctrl = 0;
+        val = bcm_uart_readl(port, UART_EXTINP_REG);
+        if (val & UART_EXTINP_RI_MASK)
+                mctrl |= TIOCM_RI;
+        if (val & UART_EXTINP_CTS_MASK)
+                mctrl |= TIOCM_CTS;
+        if (val & UART_EXTINP_DCD_MASK)
+                mctrl |= TIOCM_CD;
+        if (val & UART_EXTINP_DSR_MASK)
+                mctrl |= TIOCM_DSR;
+        return mctrl;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void bcm_uart_stop_tx(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val &= ~(UART_CTL_TXEN_MASK);
+        bcm_uart_writel(port, val, UART_CTL_REG);
+
+        val = bcm_uart_readl(port, UART_IR_REG);
+        val &= ~UART_TX_INT_MASK;
+        bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void bcm_uart_start_tx(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_IR_REG);
+        val |= UART_TX_INT_MASK;
+        bcm_uart_writel(port, val, UART_IR_REG);
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val |= UART_CTL_TXEN_MASK;
+        bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void bcm_uart_stop_rx(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_IR_REG);
+        val &= ~UART_RX_INT_MASK;
+        bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void bcm_uart_enable_ms(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_IR_REG);
+        val |= UART_IR_MASK(UART_IR_EXTIP);
+        bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+        unsigned long flags;
+        unsigned int val;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        if (ctl)
+                val |= UART_CTL_XMITBRK_MASK;
+        else
+                val &= ~UART_CTL_XMITBRK_MASK;
+        bcm_uart_writel(port, val, UART_CTL_REG);
+
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * return port type in string format
+ */
+static const char *bcm_uart_type(struct uart_port *port)
+{
+        return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void bcm_uart_do_rx(struct uart_port *port)
+{
+        struct tty_struct *tty;
+        unsigned int max_count;
+
+        /* limit number of char read in interrupt, should not be
+         * higher than fifo size anyway since we're much faster than
+         * serial port */
+        max_count = 32;
+        tty = port->info->port.tty;
+        do {
+                unsigned int iestat, c, cstat;
+                char flag;
+
+                /* get overrun/fifo empty information from ier
+                 * register */
+                iestat = bcm_uart_readl(port, UART_IR_REG);
+                if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
+                        break;
+
+                cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
+                port->icount.rx++;
+                flag = TTY_NORMAL;
+                c &= 0xff;
+
+                if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
+                        /* do stats first */
+                        if (cstat & UART_FIFO_BRKDET_MASK) {
+                                port->icount.brk++;
+                                if (uart_handle_break(port))
+                                        continue;
+                        }
+
+                        if (cstat & UART_FIFO_PARERR_MASK)
+                                port->icount.parity++;
+                        if (cstat & UART_FIFO_FRAMEERR_MASK)
+                                port->icount.frame++;
+
+                        /* update flag wrt read_status_mask */
+                        cstat &= port->read_status_mask;
+                        if (cstat & UART_FIFO_BRKDET_MASK)
+                                flag = TTY_BREAK;
+                        if (cstat & UART_FIFO_FRAMEERR_MASK)
+                                flag = TTY_FRAME;
+                        if (cstat & UART_FIFO_PARERR_MASK)
+                                flag = TTY_PARITY;
+                }
+
+                if (uart_handle_sysrq_char(port, c))
+                        continue;
+
+                if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+                        port->icount.overrun++;
+                        tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+                }
+
+                if ((cstat & port->ignore_status_mask) == 0)
+                        tty_insert_flip_char(tty, c, flag);
+
+        } while (--max_count);
+
+        tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void bcm_uart_do_tx(struct uart_port *port)
+{
+        struct circ_buf *xmit;
+        unsigned int val, max_count;
+
+        if (port->x_char) {
+                bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
+                port->icount.tx++;
+                port->x_char = 0;
+                return;
+        }
+
+        if (uart_tx_stopped(port)) {
+                bcm_uart_stop_tx(port);
+                return;
+        }
+
+        xmit = &port->info->xmit;
+        if (uart_circ_empty(xmit))
+                goto txq_empty;
+
+        val = bcm_uart_readl(port, UART_MCTL_REG);
+        val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
+        max_count = port->fifosize - val;
+
+        while (max_count--) {
+                unsigned int c;
+
+                c = xmit->buf[xmit->tail];
+                bcm_uart_writel(port, c, UART_FIFO_REG);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+                if (uart_circ_empty(xmit))
+                        break;
+        }
+
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+
+        if (uart_circ_empty(xmit))
+                goto txq_empty;
+        return;
+
+txq_empty:
+        /* nothing to send, disable transmit interrupt */
+        val = bcm_uart_readl(port, UART_IR_REG);
+        val &= ~UART_TX_INT_MASK;
+        bcm_uart_writel(port, val, UART_IR_REG);
+        return;
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
+{
+        struct uart_port *port;
+        unsigned int irqstat;
+
+        port = dev_id;
+        spin_lock(&port->lock);
+
+        irqstat = bcm_uart_readl(port, UART_IR_REG);
+        if (irqstat & UART_RX_INT_STAT)
+                bcm_uart_do_rx(port);
+
+        if (irqstat & UART_TX_INT_STAT)
+                bcm_uart_do_tx(port);
+
+        if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
+                unsigned int estat;
+
+                estat = bcm_uart_readl(port, UART_EXTINP_REG);
+                if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
+                        uart_handle_cts_change(port,
+                                               estat & UART_EXTINP_CTS_MASK);
+                if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
+                        uart_handle_dcd_change(port,
+                                               estat & UART_EXTINP_DCD_MASK);
+        }
+
+        spin_unlock(&port->lock);
+        return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void bcm_uart_enable(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
+        bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void bcm_uart_disable(struct uart_port *port)
+{
+        unsigned int val;
+
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
+                 UART_CTL_RXEN_MASK);
+        bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void bcm_uart_flush(struct uart_port *port)
+{
+        unsigned int val;
+
+        /* empty rx and tx fifo */
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
+        bcm_uart_writel(port, val, UART_CTL_REG);
+
+        /* read any pending char to make sure all irq status are
+         * cleared */
+        (void)bcm_uart_readl(port, UART_FIFO_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int bcm_uart_startup(struct uart_port *port)
+{
+        unsigned int val;
+        int ret;
+
+        /* mask all irq and flush port */
+        bcm_uart_disable(port);
+        bcm_uart_writel(port, 0, UART_IR_REG);
+        bcm_uart_flush(port);
+
+        /* clear any pending external input interrupt */
+        (void)bcm_uart_readl(port, UART_EXTINP_REG);
+
+        /* set rx/tx fifo thresh to fifo half size */
+        val = bcm_uart_readl(port, UART_MCTL_REG);
+        val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
+        val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
+        val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
+        bcm_uart_writel(port, val, UART_MCTL_REG);
+
+        /* set rx fifo timeout to 1 char time */
+        val = bcm_uart_readl(port, UART_CTL_REG);
+        val &= ~UART_CTL_RXTMOUTCNT_MASK;
+        val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
+        bcm_uart_writel(port, val, UART_CTL_REG);
+
+        /* report any edge on dcd and cts */
+        val = UART_EXTINP_INT_MASK;
+        val |= UART_EXTINP_DCD_NOSENSE_MASK;
+        val |= UART_EXTINP_CTS_NOSENSE_MASK;
+        bcm_uart_writel(port, val, UART_EXTINP_REG);
+
+        /* register irq and enable rx interrupts */
+        ret = request_irq(port->irq, bcm_uart_interrupt, 0,
+                          bcm_uart_type(port), port);
+        if (ret)
+                return ret;
+        bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
+        bcm_uart_enable(port);
+        return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void bcm_uart_shutdown(struct uart_port *port)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&port->lock, flags);
+        bcm_uart_writel(port, 0, UART_IR_REG);
+        spin_unlock_irqrestore(&port->lock, flags);
+
+        bcm_uart_disable(port);
+        bcm_uart_flush(port);
+        free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void bcm_uart_set_termios(struct uart_port *port,
+                                 struct ktermios *new,
+                                 struct ktermios *old)
+{
+        unsigned int ctl, baud, quot, ier;
+        unsigned long flags;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        /* disable uart while changing speed */
+        bcm_uart_disable(port);
+        bcm_uart_flush(port);
+
+        /* update Control register */
+        ctl = bcm_uart_readl(port, UART_CTL_REG);
+        ctl &= ~UART_CTL_BITSPERSYM_MASK;
+
+        switch (new->c_cflag & CSIZE) {
+        case CS5:
+                ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
+                break;
+        case CS6:
+                ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
+                break;
+        case CS7:
+                ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
+                break;
+        default:
+                ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
+                break;
+        }
+
+        ctl &= ~UART_CTL_STOPBITS_MASK;
+        if (new->c_cflag & CSTOPB)
+                ctl |= UART_CTL_STOPBITS_2;
+        else
+                ctl |= UART_CTL_STOPBITS_1;
+
+        ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+        if (new->c_cflag & PARENB)
+                ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+        ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+        if (new->c_cflag & PARODD)
+                ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+        bcm_uart_writel(port, ctl, UART_CTL_REG);
+
+        /* update Baudword register */
+        baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+        quot = uart_get_divisor(port, baud) - 1;
+        bcm_uart_writel(port, quot, UART_BAUD_REG);
+
+        /* update Interrupt register */
+        ier = bcm_uart_readl(port, UART_IR_REG);
+
+        ier &= ~UART_IR_MASK(UART_IR_EXTIP);
+        if (UART_ENABLE_MS(port, new->c_cflag))
+                ier |= UART_IR_MASK(UART_IR_EXTIP);
+
+        bcm_uart_writel(port, ier, UART_IR_REG);
+
+        /* update read/ignore mask */
+        port->read_status_mask = UART_FIFO_VALID_MASK;
+        if (new->c_iflag & INPCK) {
+                port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
+                port->read_status_mask |= UART_FIFO_PARERR_MASK;
+        }
+        if (new->c_iflag & (BRKINT))
+                port->read_status_mask |= UART_FIFO_BRKDET_MASK;
+
+        port->ignore_status_mask = 0;
+        if (new->c_iflag & IGNPAR)
+                port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
+        if (new->c_iflag & IGNBRK)
+                port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
+        if (!(new->c_cflag & CREAD))
+                port->ignore_status_mask |= UART_FIFO_VALID_MASK;
+
+        uart_update_timeout(port, new->c_cflag, baud);
+        bcm_uart_enable(port);
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int bcm_uart_request_port(struct uart_port *port)
+{
+        unsigned int size;
+
+        size = RSET_UART_SIZE;
+        if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
+                dev_err(port->dev, "Memory region busy\n");
+                return -EBUSY;
+        }
+
+        port->membase = ioremap(port->mapbase, size);
+        if (!port->membase) {
+                dev_err(port->dev, "Unable to map registers\n");
+                release_mem_region(port->mapbase, size);
+                return -EBUSY;
+        }
+        return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void bcm_uart_release_port(struct uart_port *port)
+{
+        release_mem_region(port->mapbase, RSET_UART_SIZE);
+        iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void bcm_uart_config_port(struct uart_port *port, int flags)
+{
+        if (flags & UART_CONFIG_TYPE) {
+                if (bcm_uart_request_port(port))
+                        return;
+                port->type = PORT_BCM63XX;
+        }
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int bcm_uart_verify_port(struct uart_port *port,
+                                struct serial_struct *serinfo)
+{
+        if (port->type != PORT_BCM63XX)
+                return -EINVAL;
+        if (port->irq != serinfo->irq)
+                return -EINVAL;
+        if (port->iotype != serinfo->io_type)
+                return -EINVAL;
+        if (port->mapbase != (unsigned long)serinfo->iomem_base)
+                return -EINVAL;
+        return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops bcm_uart_ops = {
+        .tx_empty       = bcm_uart_tx_empty,
+        .get_mctrl      = bcm_uart_get_mctrl,
+        .set_mctrl      = bcm_uart_set_mctrl,
+        .start_tx       = bcm_uart_start_tx,
+        .stop_tx        = bcm_uart_stop_tx,
+        .stop_rx        = bcm_uart_stop_rx,
+        .enable_ms      = bcm_uart_enable_ms,
+        .break_ctl      = bcm_uart_break_ctl,
+        .startup        = bcm_uart_startup,
+        .shutdown       = bcm_uart_shutdown,
+        .set_termios    = bcm_uart_set_termios,
+        .type           = bcm_uart_type,
+        .release_port   = bcm_uart_release_port,
+        .request_port   = bcm_uart_request_port,
+        .config_port    = bcm_uart_config_port,
+        .verify_port    = bcm_uart_verify_port,
+};
+
+
+
+#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+        unsigned int tmout;
+
+        /* Wait up to 10ms for the character(s) to be sent. */
+        tmout = 10000;
+        while (--tmout) {
+                unsigned int val;
+
+                val = bcm_uart_readl(port, UART_IR_REG);
+                if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+                        break;
+                udelay(1);
+        }
+
+        /* Wait up to 1s for flow control if necessary */
+        if (port->flags & UPF_CONS_FLOW) {
+                tmout = 1000000;
+                while (--tmout) {
+                        unsigned int val;
+
+                        val = bcm_uart_readl(port, UART_EXTINP_REG);
+                        if (val & UART_EXTINP_CTS_MASK)
+                                break;
+                        udelay(1);
+                }
+        }
+}
+
+/*
+ * output given char
+ */
+static void bcm_console_putchar(struct uart_port *port, int ch)
+{
+        wait_for_xmitr(port);
+        bcm_uart_writel(port, ch, UART_FIFO_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void bcm_console_write(struct console *co, const char *s,
+                              unsigned int count)
+{
+        struct uart_port *port;
+        unsigned long flags;
+        int locked;
+
+        port = &ports[co->index];
+
+        local_irq_save(flags);
+        if (port->sysrq) {
+                /* bcm_uart_interrupt() already took the lock */
+                locked = 0;
+        } else if (oops_in_progress) {
+                locked = spin_trylock(&port->lock);
+        } else {
+                spin_lock(&port->lock);
+                locked = 1;
+        }
+
+        /* call helper to deal with \r\n */
+        uart_console_write(port, s, count, bcm_console_putchar);
+
+        /* and wait for char to be transmitted */
+        wait_for_xmitr(port);
+
+        if (locked)
+                spin_unlock(&port->lock);
+        local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int bcm_console_setup(struct console *co, char *options)
+{
+        struct uart_port *port;
+        int baud = 9600;
+        int bits = 8;
+        int parity = 'n';
+        int flow = 'n';
+
+        if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
+                return -EINVAL;
+        port = &ports[co->index];
+        if (!port->membase)
+                return -ENODEV;
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+        return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bcm_uart_driver;
+
+static struct console bcm63xx_console = {
+        .name           = "ttyS",
+        .write          = bcm_console_write,
+        .device         = uart_console_device,
+        .setup          = bcm_console_setup,
+        .flags          = CON_PRINTBUFFER,
+        .index          = -1,
+        .data           = &bcm_uart_driver,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+        register_console(&bcm63xx_console);
+        return 0;
+}
+
+console_initcall(bcm63xx_console_init);
+
+#define BCM63XX_CONSOLE (&bcm63xx_console)
+#else
+#define BCM63XX_CONSOLE NULL
+#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
+
+static struct uart_driver bcm_uart_driver = {
+        .owner          = THIS_MODULE,
+        .driver_name    = "bcm63xx_uart",
+        .dev_name       = "ttyS",
+        .major          = TTY_MAJOR,
+        .minor          = 64,
+        .nr             = 1,
+        .cons           = BCM63XX_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit bcm_uart_probe(struct platform_device *pdev)
+{
+        struct resource *res_mem, *res_irq;
+        struct uart_port *port;
+        struct clk *clk;
+        int ret;
+
+        if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
+                return -EINVAL;
+
+        if (ports[pdev->id].membase)
+                return -EBUSY;
+
+        res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res_mem)
+                return -ENODEV;
+
+        res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!res_irq)
+                return -ENODEV;
+
+        clk = clk_get(&pdev->dev, "periph");
+        if (IS_ERR(clk))
+                return -ENODEV;
+
+        port = &ports[pdev->id];
+        memset(port, 0, sizeof(*port));
+        port->iotype = UPIO_MEM;
+        port->mapbase = res_mem->start;
+        port->irq = res_irq->start;
+        port->ops = &bcm_uart_ops;
+        port->flags = UPF_BOOT_AUTOCONF;
+        port->dev = &pdev->dev;
+        port->fifosize = 16;
+        port->uartclk = clk_get_rate(clk) / 2;
+        clk_put(clk);
+
+        ret = uart_add_one_port(&bcm_uart_driver, port);
+        if (ret) {
+                kfree(port);
+                return ret;
+        }
+        platform_set_drvdata(pdev, port);
+        return 0;
+}
+
+static int __devexit bcm_uart_remove(struct platform_device *pdev)
+{
+        struct uart_port *port;
+
+        port = platform_get_drvdata(pdev);
+        uart_remove_one_port(&bcm_uart_driver, port);
+        platform_set_drvdata(pdev, NULL);
+        /* mark port as free */
+        ports[pdev->id].membase = 0;
+        return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver bcm_uart_platform_driver = {
+        .probe  = bcm_uart_probe,
+        .remove = __devexit_p(bcm_uart_remove),
+        .driver = {
+                .owner = THIS_MODULE,
+                .name  = "bcm63xx_uart",
+        },
+};
+
+static int __init bcm_uart_init(void)
+{
+        int ret;
+
+        ret = uart_register_driver(&bcm_uart_driver);
+        if (ret)
+                return ret;
+
+        ret = platform_driver_register(&bcm_uart_platform_driver);
+        if (ret)
+                uart_unregister_driver(&bcm_uart_driver);
+
+        return ret;
+}
+
+static void __exit bcm_uart_exit(void)
+{
+        platform_driver_unregister(&bcm_uart_platform_driver);
+        uart_unregister_driver(&bcm_uart_driver);
+}
+
+module_init(bcm_uart_init);
+module_exit(bcm_uart_exit);
+
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
+MODULE_LICENSE("GPL");