trivial: fix then -> than typos in comments and documentation

- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

24 files changed, 37 insertions, 37 deletions

diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 967170368933..8b2d756595d9 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
 
 /* minimum pwm at which the fan is driven (pwm can by increased depending on
    the temp. Notice that for the scy some fans share there minimum speed.
-   Also notice that with the scy the sensor order is different then with the
+   Also notice that with the scy the sensor order is different than with the
    other chips, this order was in the 2.4 driver and kept for consistency. */
 static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
         { 0x55, 0x65 },                                 /* pos */
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index a3c5af1d7ec0..de5263beab4a 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
                 if (err)
                         goto out;
         } else {
-                /* Can't be smaller then the number of outstanding CQEs */
+                /* Can't be smaller than the number of outstanding CQEs */
                 outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
                 if (entries < outst_cqe + 1) {
                         err = 0;
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 1bcdbbb9e7d3..3d45817e6dcd 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
  *      @i2o_dev: the I2O device which was added
  *
  *      If a I2O device is added we catch the notification, because I2O classes
- *      other then SCSI peripheral will not be received through
+ *      other than SCSI peripheral will not be received through
  *      i2o_scsi_probe().
  */
 static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index d38bca64bb15..d2fd550f7e09 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -34,7 +34,7 @@
  *      aperture size, not the dram size, and the V370PDC supplies no
  *      other method for memory size discovery.  This problem is
  *      mostly only relevant when compiled as a module, as the
- *      unloading of the module with an aperture size smaller then
+ *      unloading of the module with an aperture size smaller than
  *      the ram will cause the driver to detect the onboard memory
  *      size to be equal to the aperture size when the module is
  *      reloaded.  Soooo, to help, the module supports an msize
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 048a606cebde..25def348e5ba 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -717,7 +717,7 @@ write_error:
  * to the real data size, although the @buf buffer has to contain the
  * alignment. In all other cases, @len has to be aligned.
  *
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
  * volumes. This function returns zero in case of success and a negative error
  * code in case of failure.
  */
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index a74118c05745..fe81039f2a7c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -465,7 +465,7 @@ out:
  * This function synchronously erases physical eraseblock @pnum. If @torture
  * flag is not zero, the physical eraseblock is checked by means of writing
  * different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
  *
  * This function returns the number of erasures made in case of success, %-EIO
  * if the erasure failed or the torturing test failed, and other negative error
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 41d47e1cf15c..ecde202a5a12 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
                         return 0;
                 } else {
                         /*
-                         * This logical eraseblock is older then the one found
+                         * This logical eraseblock is older than the one found
                          * previously.
                          */
                         if (cmp_res & 4)
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 2ad940409053..8419fdccc79c 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -135,7 +135,7 @@ enum {
  * The erase counter header takes 64 bytes and has a plenty of unused space for
  * future usage. The unused fields are zeroed. The @version field is used to
  * indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
  * version, the image is rejected. This may be useful in future if something
  * is changed radically. This field is duplicated in the volume identifier
  * header.
@@ -187,7 +187,7 @@ struct ubi_ec_hdr {
  * (sequence number) is used to distinguish between older and newer versions of
  * logical eraseblocks.
  *
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
  * corresponding to the same logical eraseblock, i.e., having the same @vol_id
  * and @lnum values in the volume identifier header. Suppose we have a logical
  * eraseblock L and it is mapped to the physical eraseblock P.
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 333c8941552f..1afc61e7455d 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
                 if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
                         /* Auto re-size flag may be set only for one volume */
                         if (ubi->autoresize_vol_id != -1) {
-                                ubi_err("more then one auto-resize volume (%d "
+                                ubi_err("more than one auto-resize volume (%d "
                                         "and %d)", ubi->autoresize_vol_id, i);
                                 kfree(vol);
                                 return -EINVAL;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 14901cb82c18..891534f8210d 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -128,7 +128,7 @@
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
  * counter of the free physical eraseblock to pick. Namely, the WL sub-system
- * does not pick eraseblocks with erase counter greater then the lowest erase
+ * does not pick eraseblocks with erase counter greater than the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
                 /*
                  * We schedule wear-leveling only if the difference between the
                  * lowest erase counter of used physical eraseblocks and a high
-                 * erase counter of free physical eraseblocks is greater then
+                 * erase counter of free physical eraseblocks is greater than
                  * %UBI_WL_THRESHOLD.
                  */
                 e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 67de94f1f30e..fefa6ab13064 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
         u8 shift = 8*4;
         u8 digit;
         if (len < 10) {
-                /* Need more then 10chars for this format */
+                /* Need more than 10chars for this format */
                 *str_ptr = '\0';
                 return -EINVAL;
         }
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d04eef53571e..e1a3fc1303ee 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
  *
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
  * Phy Status register.  For IGP phy's, this bit is valid only if link speed is
  * 10 Mbps.  If the link speed is 100 Mbps there is no polarity so this bit will
  * return 0.  If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
  *
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
  * Specific Status register.  For IGP phy's, it reads the Downgrade bit in the
  * Link Health register.  In IGP this bit is latched high, so the driver must
  * read it immediately after link is established.
diff --git a/drivers/net/slip.h b/drivers/net/slip.h
index 853e0f6ec710..9ea5c11287d2 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
   unsigned long         tx_errors;      /* Planned stuff                */
   unsigned long         rx_dropped;     /* No memory for skb            */
   unsigned long         tx_dropped;     /* When MTU change              */
-  unsigned long         rx_over_errors; /* Frame bigger then SLIP buf.  */
+  unsigned long         rx_over_errors; /* Frame bigger than SLIP buf.  */
 #ifdef SL_INCLUDE_CSLIP
   unsigned long         tx_compressed;
   unsigned long         rx_compressed;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a10a83a11d9f..a7a4dc4d6313 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
  * skb for rx. It assumes that Rx is desabled in HW
  * funcs are grouped for better cache usage
  *
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
  * filled and packets will be dropped by nic without getting into host or
  * cousing interrupt. Anyway, in that condition, host has no chance to proccess
  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
  *
  * Pushes desc to TxD fifo and overlaps it if needed.
  * NOTE: this func does not check for available space. this is responsibility
- *    of the caller. Neither does it check that data size is smaller then
+ *    of the caller. Neither does it check that data size is smaller than
  *    fifo size.
  */
 static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a011666342ff..50eb29ce3c87 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
  * will consequently cause a timeout.
  *
  * NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
  * disabled.!?
  *
  * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a7..753de1a9c4b3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
                        IPW_AUX_HOST_RESET_REG_STOP_MASTER);
 
         /* Step 2. Wait for stop Master Assert
-         *         (not more then 50us, otherwise ret error */
+         *         (not more than 50us, otherwise ret error */
         i = 5;
         do {
                 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64c..aee9cba13eb3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
          * Make room for new data, note that we increase both
          * headsize and tailsize when required. The tailsize is
          * only needed when ICV data needs to be inserted and
-         * the padding is smaller then the ICV data.
-         * When alignment requirements is greater then the
+         * the padding is smaller than the ICV data.
+         * When alignment requirements is greater than the
          * ICV data we must trim the skb to the correct size
          * because we need to remove the extra bytes.
          */
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index dd0de3a9ed4e..7015f2480550 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
         unsigned long tx_errors;        /* Planned stuff                */
         unsigned long rx_dropped;       /* No memory for skb            */
         unsigned long tx_dropped;       /* When MTU change              */
-        unsigned long rx_over_errors;   /* Frame bigger then STRIP buf. */
+        unsigned long rx_over_errors;   /* Frame bigger than STRIP buf. */
 
         unsigned long pps_timer;        /* Timer to determine pps       */
         unsigned long rx_pps_count;     /* Counter to determine pps     */
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 892e2878d61b..f8e05ce98621 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
             eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
                 kfree(eerb);
                 MESSAGE(KERN_WARNING, "can't open device since module "
-                        "parameter eer_pages is smaller then 1 or"
-                        " bigger then %d", (int)(INT_MAX / PAGE_SIZE));
+                        "parameter eer_pages is smaller than 1 or"
+                        " bigger than %d", (int)(INT_MAX / PAGE_SIZE));
                 unlock_kernel();
                 return -EINVAL;
         }
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index aabbeb909cc6..d8a2289fcb69 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
                         buffer = priv->buffer + sizeof(int);
                 }
                 /*
-                 * If the record is bigger then our buffer, we receive only
+                 * If the record is bigger than our buffer, we receive only
                  * a part of it. We can get the rest later.
                  */
                 if (iucv_data_count > NET_BUFFER_SIZE)
@@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
                                           0, buffer, iucv_data_count,
                                           &priv->residual_length);
                 spin_unlock_bh(&priv->priv_lock);
-                /* An rc of 5 indicates that the record was bigger then
+                /* An rc of 5 indicates that the record was bigger than
                  * the buffer, which is OK for us. A 9 indicates that the
                  * record was purged befor we could receive it.
                  */
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8c64494444bf..311ed6dea726 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport)
         uint32_t tmo;
 
         if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
-                /* For FAN, timeout should be greater then edtov */
+                /* For FAN, timeout should be greater than edtov */
                 tmo = (((phba->fc_edtov + 999) / 1000) + 1);
         } else {
-                /* Normal discovery timeout should be > then ELS/CT timeout
+                /* Normal discovery timeout should be > than ELS/CT timeout
                  * FC spec states we need 3 * ratov for CT requests
                  */
                 tmo = ((phba->fc_ratov * 3) + 3);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 01dfdc8696f8..a36a120561e2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
                 if (unlikely(pring->local_getidx >= max_cmd_idx)) {
                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                         "0315 Ring %d issue: portCmdGet %d "
-                                        "is bigger then cmd ring %d\n",
+                                        "is bigger than cmd ring %d\n",
                                         pring->ringno,
                                         pring->local_getidx, max_cmd_idx);
 
@@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 {
         struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
         /*
-         * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+         * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
          * rsp ring <portRspMax>
          */
         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                         "0312 Ring %d handler: portRspPut %d "
-                        "is bigger then rsp ring %d\n",
+                        "is bigger than rsp ring %d\n",
                         pring->ringno, le32_to_cpu(pgp->rspPutInx),
                         pring->numRiocb);
 
@@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
         portRspPut = le32_to_cpu(pgp->rspPutInx);
         if (portRspPut >= portRspMax) {
                 /*
-                 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+                 * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
                  * rsp ring <portRspMax>
                  */
                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                 "0303 Ring %d handler: portRspPut %d "
-                                "is bigger then rsp ring %d\n",
+                                "is bigger than rsp ring %d\n",
                                 pring->ringno, portRspPut, portRspMax);
 
                 phba->link_state = LPFC_HBA_ERROR;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8b2c619a09f2..e642c22c80e2 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
         unsigned long flags;
 
         /* Disable output DMA channel for the serial port in question
-         * ( set to something other then serialX)
+         * ( set to something other than serialX)
          */
         local_irq_save(flags);
         DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
         unsigned long flags;
 
         /* Disable input DMA channel for the serial port in question
-         * ( set to something other then serialX)
+         * ( set to something other than serialX)
          */
         local_irq_save(flags);
         if (info->line == 0) {
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index e6210725b9ab..d012edda6d11 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c)
                 c->vc_y = screen_info.orig_y;
         }
 
-        /* We can't copy in more then the size of the video buffer,
+        /* We can't copy in more than the size of the video buffer,
          * or we'll be copying in VGA BIOS */
 
         if (!vga_is_gfx)