w1-gpio: add GPIO w1 bus master driver

Add a GPIO 1-wire bus master driver.  The driver used the GPIO API to
control the wire and the GPIO pin can be specified using platform data
similar to i2c-gpio.  The driver was tested with AT91SAM9260 + DS2401.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 135 insertions, 0 deletions

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 8236d447adf5..c4493091c655 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -42,5 +42,15 @@ config W1_MASTER_DS1WM
           in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
           hx4700.
 
+config W1_MASTER_GPIO
+        tristate "GPIO 1-wire busmaster"
+        depends on GENERIC_GPIO
+        help
+          Say Y here if you want to communicate with your 1-wire devices using
+          GPIO pins. This driver uses the GPIO API to control the wire.
+
+          This support is also available as a module.  If so, the module
+          will be called w1-gpio.ko.
+
 endmenu
 
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 11551b328186..1420b5bbdda8 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_W1_MASTER_MATROX)		+= matrox_w1.o
 obj-$(CONFIG_W1_MASTER_DS2490)          += ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)          += ds2482.o
 obj-$(CONFIG_W1_MASTER_DS1WM)           += ds1wm.o
+obj-$(CONFIG_W1_MASTER_GPIO)            += w1-gpio.o
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
new file mode 100644
index 000000000000..9e1138a75e8b
--- /dev/null
+++ b/drivers/w1/masters/w1-gpio.c
@@ -0,0 +1,124 @@
+/*
+ * w1-gpio - GPIO w1 bus master driver
+ *
+ * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/w1-gpio.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#include <asm/gpio.h>
+
+static void w1_gpio_write_bit_dir(void *data, u8 bit)
+{
+        struct w1_gpio_platform_data *pdata = data;
+
+        if (bit)
+                gpio_direction_input(pdata->pin);
+        else
+                gpio_direction_output(pdata->pin, 0);
+}
+
+static void w1_gpio_write_bit_val(void *data, u8 bit)
+{
+        struct w1_gpio_platform_data *pdata = data;
+
+        gpio_set_value(pdata->pin, bit);
+}
+
+static u8 w1_gpio_read_bit(void *data)
+{
+        struct w1_gpio_platform_data *pdata = data;
+
+        return gpio_get_value(pdata->pin);
+}
+
+static int __init w1_gpio_probe(struct platform_device *pdev)
+{
+        struct w1_bus_master *master;
+        struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+        int err;
+
+        if (!pdata)
+                return -ENXIO;
+
+        master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
+        if (!master)
+                return -ENOMEM;
+
+        err = gpio_request(pdata->pin, "w1");
+        if (err)
+                goto free_master;
+
+        master->data = pdata;
+        master->read_bit = w1_gpio_read_bit;
+
+        if (pdata->is_open_drain) {
+                gpio_direction_output(pdata->pin, 1);
+                master->write_bit = w1_gpio_write_bit_val;
+        } else {
+                gpio_direction_input(pdata->pin);
+                master->write_bit = w1_gpio_write_bit_dir;
+        }
+
+        err = w1_add_master_device(master);
+        if (err)
+                goto free_gpio;
+
+        platform_set_drvdata(pdev, master);
+
+        return 0;
+
+ free_gpio:
+        gpio_free(pdata->pin);
+ free_master:
+        kfree(master);
+
+        return err;
+}
+
+static int __exit w1_gpio_remove(struct platform_device *pdev)
+{
+        struct w1_bus_master *master = platform_get_drvdata(pdev);
+        struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+        w1_remove_master_device(master);
+        gpio_free(pdata->pin);
+        kfree(master);
+
+        return 0;
+}
+
+static struct platform_driver w1_gpio_driver = {
+        .driver = {
+                .name   = "w1-gpio",
+                .owner  = THIS_MODULE,
+        },
+        .remove = __exit_p(w1_gpio_remove),
+};
+
+static int __init w1_gpio_init(void)
+{
+        return platform_driver_probe(&w1_gpio_driver, w1_gpio_probe);
+}
+
+static void __exit w1_gpio_exit(void)
+{
+        platform_driver_unregister(&w1_gpio_driver);
+}
+
+module_init(w1_gpio_init);
+module_exit(w1_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO w1 bus master driver");
+MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
+MODULE_LICENSE("GPL");