aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/w1
diff options
context:
space:
mode:
authorEvgeniy Polyakov <johnpol@2ka.mipt.ru>2005-12-06 05:38:28 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2006-03-23 20:28:12 -0500
commitbaf12ae29ab4cc6381e21b2e1a3af75a6a8f7566 (patch)
tree43658918e7221e94e40a62de48f04b2b23d75b3a /drivers/w1
parentbd529cfb40c427d5b5aae0d315afb9f0a1da5e76 (diff)
[PATCH] W1: Add the DS2482 I2C-to-w1 bridge driver.
Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/Kconfig10
-rw-r--r--drivers/w1/masters/Makefile2
-rw-r--r--drivers/w1/masters/ds2482.c564
3 files changed, 576 insertions, 0 deletions
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 51bd64d0e54d..1ff11b5a3ad2 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -34,5 +34,15 @@ config W1_MASTER_DS9490_BRIDGE
34 This support is also available as a module. If so, the module 34 This support is also available as a module. If so, the module
35 will be called ds_w1_bridge.ko. 35 will be called ds_w1_bridge.ko.
36 36
37config W1_MASTER_DS2482
38 tristate "Maxim DS2482 I2C to 1-Wire bridge"
39 depends on I2C && W1 && EXPERIMENTAL
40 help
41 If you say yes here you get support for the Maxim DS2482
42 I2C to 1-Wire bridge.
43
44 This driver can also be built as a module. If so, the module
45 will be called ds2482.
46
37endmenu 47endmenu
38 48
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index d9b84e522d6c..1f3c8b983dc1 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -9,3 +9,5 @@ ds9490r-objs := dscore.o
9 9
10obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o 10obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o
11 11
12obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
13
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
new file mode 100644
index 000000000000..d1cacd23576b
--- /dev/null
+++ b/drivers/w1/masters/ds2482.c
@@ -0,0 +1,564 @@
1/**
2 * ds2482.c - provides i2c to w1-master bridge(s)
3 * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
4 *
5 * The DS2482 is a sensor chip made by Dallas Semiconductor (Maxim).
6 * It is a I2C to 1-wire bridge.
7 * There are two variations: -100 and -800, which have 1 or 8 1-wire ports.
8 * The complete datasheet can be obtained from MAXIM's website at:
9 * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4382
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; version 2 of the License.
14 */
15
16#include <linux/module.h>
17#include <linux/init.h>
18#include <linux/slab.h>
19#include <linux/i2c.h>
20#include <linux/delay.h>
21#include <asm/delay.h>
22
23#include "../w1.h"
24#include "../w1_int.h"
25
26/**
27 * Address is selected using 2 pins, resulting in 4 possible addresses.
28 * 0x18, 0x19, 0x1a, 0x1b
29 * However, the chip cannot be detected without doing an i2c write,
30 * so use the force module parameter.
31 */
32static unsigned short normal_i2c[] = {I2C_CLIENT_END};
33
34/**
35 * Insmod parameters
36 */
37I2C_CLIENT_INSMOD_1(ds2482);
38
39/**
40 * The DS2482 registers - there are 3 registers that are addressed by a read
41 * pointer. The read pointer is set by the last command executed.
42 *
43 * To read the data, issue a register read for any address
44 */
45#define DS2482_CMD_RESET 0xF0 /* No param */
46#define DS2482_CMD_SET_READ_PTR 0xE1 /* Param: DS2482_PTR_CODE_xxx */
47#define DS2482_CMD_CHANNEL_SELECT 0xC3 /* Param: Channel byte - DS2482-800 only */
48#define DS2482_CMD_WRITE_CONFIG 0xD2 /* Param: Config byte */
49#define DS2482_CMD_1WIRE_RESET 0xB4 /* Param: None */
50#define DS2482_CMD_1WIRE_SINGLE_BIT 0x87 /* Param: Bit byte (bit7) */
51#define DS2482_CMD_1WIRE_WRITE_BYTE 0xA5 /* Param: Data byte */
52#define DS2482_CMD_1WIRE_READ_BYTE 0x96 /* Param: None */
53/* Note to read the byte, Set the ReadPtr to Data then read (any addr) */
54#define DS2482_CMD_1WIRE_TRIPLET 0x78 /* Param: Dir byte (bit7) */
55
56/* Values for DS2482_CMD_SET_READ_PTR */
57#define DS2482_PTR_CODE_STATUS 0xF0
58#define DS2482_PTR_CODE_DATA 0xE1
59#define DS2482_PTR_CODE_CHANNEL 0xD2 /* DS2482-800 only */
60#define DS2482_PTR_CODE_CONFIG 0xC3
61
62/**
63 * Configure Register bit definitions
64 * The top 4 bits always read 0.
65 * To write, the top nibble must be the 1's compl. of the low nibble.
66 */
67#define DS2482_REG_CFG_1WS 0x08
68#define DS2482_REG_CFG_SPU 0x04
69#define DS2482_REG_CFG_PPM 0x02
70#define DS2482_REG_CFG_APU 0x01
71
72
73/**
74 * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
75 * To set the channel, write the value at the index of the channel.
76 * Read and compare against the corresponding value to verify the change.
77 */
78static const u8 ds2482_chan_wr[8] =
79 { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
80static const u8 ds2482_chan_rd[8] =
81 { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
82
83
84/**
85 * Status Register bit definitions (read only)
86 */
87#define DS2482_REG_STS_DIR 0x80
88#define DS2482_REG_STS_TSB 0x40
89#define DS2482_REG_STS_SBR 0x20
90#define DS2482_REG_STS_RST 0x10
91#define DS2482_REG_STS_LL 0x08
92#define DS2482_REG_STS_SD 0x04
93#define DS2482_REG_STS_PPD 0x02
94#define DS2482_REG_STS_1WB 0x01
95
96
97static int ds2482_attach_adapter(struct i2c_adapter *adapter);
98static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind);
99static int ds2482_detach_client(struct i2c_client *client);
100
101
102/**
103 * Driver data (common to all clients)
104 */
105static struct i2c_driver ds2482_driver = {
106 .driver = {
107 .owner = THIS_MODULE,
108 .name = "ds2482",
109 },
110 .attach_adapter = ds2482_attach_adapter,
111 .detach_client = ds2482_detach_client,
112};
113
114/*
115 * Client data (each client gets its own)
116 */
117
118struct ds2482_data;
119
120struct ds2482_w1_chan {
121 struct ds2482_data *pdev;
122 u8 channel;
123 struct w1_bus_master w1_bm;
124};
125
126struct ds2482_data {
127 struct i2c_client client;
128 struct semaphore access_lock;
129
130 /* 1-wire interface(s) */
131 int w1_count; /* 1 or 8 */
132 struct ds2482_w1_chan w1_ch[8];
133
134 /* per-device values */
135 u8 channel;
136 u8 read_prt; /* see DS2482_PTR_CODE_xxx */
137 u8 reg_config;
138};
139
140
141/**
142 * Sets the read pointer.
143 * @param pdev The ds2482 client pointer
144 * @param read_ptr see DS2482_PTR_CODE_xxx above
145 * @return -1 on failure, 0 on success
146 */
147static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
148{
149 if (pdev->read_prt != read_ptr) {
150 if (i2c_smbus_write_byte_data(&pdev->client,
151 DS2482_CMD_SET_READ_PTR,
152 read_ptr) < 0)
153 return -1;
154
155 pdev->read_prt = read_ptr;
156 }
157 return 0;
158}
159
160/**
161 * Sends a command without a parameter
162 * @param pdev The ds2482 client pointer
163 * @param cmd DS2482_CMD_RESET,
164 * DS2482_CMD_1WIRE_RESET,
165 * DS2482_CMD_1WIRE_READ_BYTE
166 * @return -1 on failure, 0 on success
167 */
168static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
169{
170 if (i2c_smbus_write_byte(&pdev->client, cmd) < 0)
171 return -1;
172
173 pdev->read_prt = DS2482_PTR_CODE_STATUS;
174 return 0;
175}
176
177/**
178 * Sends a command with a parameter
179 * @param pdev The ds2482 client pointer
180 * @param cmd DS2482_CMD_WRITE_CONFIG,
181 * DS2482_CMD_1WIRE_SINGLE_BIT,
182 * DS2482_CMD_1WIRE_WRITE_BYTE,
183 * DS2482_CMD_1WIRE_TRIPLET
184 * @param byte The data to send
185 * @return -1 on failure, 0 on success
186 */
187static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
188 u8 cmd, u8 byte)
189{
190 if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0)
191 return -1;
192
193 /* all cmds leave in STATUS, except CONFIG */
194 pdev->read_prt = (cmd != DS2482_CMD_WRITE_CONFIG) ?
195 DS2482_PTR_CODE_STATUS : DS2482_PTR_CODE_CONFIG;
196 return 0;
197}
198
199
200/*
201 * 1-Wire interface code
202 */
203
204#define DS2482_WAIT_IDLE_TIMEOUT 100
205
206/**
207 * Waits until the 1-wire interface is idle (not busy)
208 *
209 * @param pdev Pointer to the device structure
210 * @return the last value read from status or -1 (failure)
211 */
212static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
213{
214 int temp = -1;
215 int retries = 0;
216
217 if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) {
218 do {
219 temp = i2c_smbus_read_byte(&pdev->client);
220 } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
221 (++retries > DS2482_WAIT_IDLE_TIMEOUT));
222 }
223
224 if (retries > DS2482_WAIT_IDLE_TIMEOUT)
225 printk(KERN_ERR "%s: timeout on channel %d\n",
226 __func__, pdev->channel);
227
228 return temp;
229}
230
231/**
232 * Selects a w1 channel.
233 * The 1-wire interface must be idle before calling this function.
234 *
235 * @param pdev The ds2482 client pointer
236 * @param channel 0-7
237 * @return -1 (failure) or 0 (success)
238 */
239static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
240{
241 if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT,
242 ds2482_chan_wr[channel]) < 0)
243 return -1;
244
245 pdev->read_prt = DS2482_PTR_CODE_CHANNEL;
246 pdev->channel = -1;
247 if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) {
248 pdev->channel = channel;
249 return 0;
250 }
251 return -1;
252}
253
254
255/**
256 * Performs the touch-bit function, which writes a 0 or 1 and reads the level.
257 *
258 * @param data The ds2482 channel pointer
259 * @param bit The level to write: 0 or non-zero
260 * @return The level read: 0 or 1
261 */
262static u8 ds2482_w1_touch_bit(void *data, u8 bit)
263{
264 struct ds2482_w1_chan *pchan = data;
265 struct ds2482_data *pdev = pchan->pdev;
266 int status = -1;
267
268 down(&pdev->access_lock);
269
270 /* Select the channel */
271 ds2482_wait_1wire_idle(pdev);
272 if (pdev->w1_count > 1)
273 ds2482_set_channel(pdev, pchan->channel);
274
275 /* Send the touch command, wait until 1WB == 0, return the status */
276 if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_SINGLE_BIT,
277 bit ? 0xFF : 0))
278 status = ds2482_wait_1wire_idle(pdev);
279
280 up(&pdev->access_lock);
281
282 return (status & DS2482_REG_STS_SBR) ? 1 : 0;
283}
284
285/**
286 * Performs the triplet function, which reads two bits and writes a bit.
287 * The bit written is determined by the two reads:
288 * 00 => dbit, 01 => 0, 10 => 1
289 *
290 * @param data The ds2482 channel pointer
291 * @param dbit The direction to choose if both branches are valid
292 * @return b0=read1 b1=read2 b3=bit written
293 */
294static u8 ds2482_w1_triplet(void *data, u8 dbit)
295{
296 struct ds2482_w1_chan *pchan = data;
297 struct ds2482_data *pdev = pchan->pdev;
298 int status = (3 << 5);
299
300 down(&pdev->access_lock);
301
302 /* Select the channel */
303 ds2482_wait_1wire_idle(pdev);
304 if (pdev->w1_count > 1)
305 ds2482_set_channel(pdev, pchan->channel);
306
307 /* Send the triplet command, wait until 1WB == 0, return the status */
308 if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_TRIPLET,
309 dbit ? 0xFF : 0))
310 status = ds2482_wait_1wire_idle(pdev);
311
312 up(&pdev->access_lock);
313
314 /* Decode the status */
315 return (status >> 5);
316}
317
318/**
319 * Performs the write byte function.
320 *
321 * @param data The ds2482 channel pointer
322 * @param byte The value to write
323 */
324static void ds2482_w1_write_byte(void *data, u8 byte)
325{
326 struct ds2482_w1_chan *pchan = data;
327 struct ds2482_data *pdev = pchan->pdev;
328
329 down(&pdev->access_lock);
330
331 /* Select the channel */
332 ds2482_wait_1wire_idle(pdev);
333 if (pdev->w1_count > 1)
334 ds2482_set_channel(pdev, pchan->channel);
335
336 /* Send the write byte command */
337 ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_WRITE_BYTE, byte);
338
339 up(&pdev->access_lock);
340}
341
342/**
343 * Performs the read byte function.
344 *
345 * @param data The ds2482 channel pointer
346 * @return The value read
347 */
348static u8 ds2482_w1_read_byte(void *data)
349{
350 struct ds2482_w1_chan *pchan = data;
351 struct ds2482_data *pdev = pchan->pdev;
352 int result;
353
354 down(&pdev->access_lock);
355
356 /* Select the channel */
357 ds2482_wait_1wire_idle(pdev);
358 if (pdev->w1_count > 1)
359 ds2482_set_channel(pdev, pchan->channel);
360
361 /* Send the read byte command */
362 ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_READ_BYTE);
363
364 /* Wait until 1WB == 0 */
365 ds2482_wait_1wire_idle(pdev);
366
367 /* Select the data register */
368 ds2482_select_register(pdev, DS2482_PTR_CODE_DATA);
369
370 /* Read the data byte */
371 result = i2c_smbus_read_byte(&pdev->client);
372
373 up(&pdev->access_lock);
374
375 return result;
376}
377
378
379/**
380 * Sends a reset on the 1-wire interface
381 *
382 * @param data The ds2482 channel pointer
383 * @return 0=Device present, 1=No device present or error
384 */
385static u8 ds2482_w1_reset_bus(void *data)
386{
387 struct ds2482_w1_chan *pchan = data;
388 struct ds2482_data *pdev = pchan->pdev;
389 int err;
390 u8 retval = 1;
391
392 down(&pdev->access_lock);
393
394 /* Select the channel */
395 ds2482_wait_1wire_idle(pdev);
396 if (pdev->w1_count > 1)
397 ds2482_set_channel(pdev, pchan->channel);
398
399 /* Send the reset command */
400 err = ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_RESET);
401 if (err >= 0) {
402 /* Wait until the reset is complete */
403 err = ds2482_wait_1wire_idle(pdev);
404 retval = !(err & DS2482_REG_STS_PPD);
405
406 /* If the chip did reset since detect, re-config it */
407 if (err & DS2482_REG_STS_RST)
408 ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
409 0xF0);
410 }
411
412 up(&pdev->access_lock);
413
414 return retval;
415}
416
417
418/**
419 * Called to see if the device exists on an i2c bus.
420 */
421static int ds2482_attach_adapter(struct i2c_adapter *adapter)
422{
423 return i2c_probe(adapter, &addr_data, ds2482_detect);
424}
425
426
427/*
428 * The following function does more than just detection. If detection
429 * succeeds, it also registers the new chip.
430 */
431static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
432{
433 struct ds2482_data *data;
434 struct i2c_client *new_client;
435 int err = 0;
436 int temp1;
437 int idx;
438
439 if (!i2c_check_functionality(adapter,
440 I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
441 I2C_FUNC_SMBUS_BYTE))
442 goto exit;
443
444 if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
445 err = -ENOMEM;
446 goto exit;
447 }
448
449 new_client = &data->client;
450 i2c_set_clientdata(new_client, data);
451 new_client->addr = address;
452 new_client->driver = &ds2482_driver;
453 new_client->adapter = adapter;
454
455 /* Reset the device (sets the read_ptr to status) */
456 if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
457 dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n",
458 address);
459 goto exit_free;
460 }
461
462 /* Sleep at least 525ns to allow the reset to complete */
463 ndelay(525);
464
465 /* Read the status byte - only reset bit and line should be set */
466 temp1 = i2c_smbus_read_byte(new_client);
467 if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) {
468 dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status "
469 "0x%02X - not a DS2482\n", address, temp1);
470 goto exit_free;
471 }
472
473 /* Detect the 8-port version */
474 data->w1_count = 1;
475 if (ds2482_set_channel(data, 7) == 0)
476 data->w1_count = 8;
477
478 /* Set all config items to 0 (off) */
479 ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0);
480
481 /* We can fill in the remaining client fields */
482 snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00",
483 data->w1_count);
484
485 init_MUTEX(&data->access_lock);
486
487 /* Tell the I2C layer a new client has arrived */
488 if ((err = i2c_attach_client(new_client)))
489 goto exit_free;
490
491 /* Register 1-wire interface(s) */
492 for (idx = 0; idx < data->w1_count; idx++) {
493 data->w1_ch[idx].pdev = data;
494 data->w1_ch[idx].channel = idx;
495
496 /* Populate all the w1 bus master stuff */
497 data->w1_ch[idx].w1_bm.data = &data->w1_ch[idx];
498 data->w1_ch[idx].w1_bm.read_byte = ds2482_w1_read_byte;
499 data->w1_ch[idx].w1_bm.write_byte = ds2482_w1_write_byte;
500 data->w1_ch[idx].w1_bm.touch_bit = ds2482_w1_touch_bit;
501 data->w1_ch[idx].w1_bm.triplet = ds2482_w1_triplet;
502 data->w1_ch[idx].w1_bm.reset_bus = ds2482_w1_reset_bus;
503
504 err = w1_add_master_device(&data->w1_ch[idx].w1_bm);
505 if (err) {
506 data->w1_ch[idx].pdev = NULL;
507 goto exit_w1_remove;
508 }
509 }
510
511 return 0;
512
513exit_w1_remove:
514 i2c_detach_client(new_client);
515
516 for (idx = 0; idx < data->w1_count; idx++) {
517 if (data->w1_ch[idx].pdev != NULL)
518 w1_remove_master_device(&data->w1_ch[idx].w1_bm);
519 }
520exit_free:
521 kfree(data);
522exit:
523 return err;
524}
525
526static int ds2482_detach_client(struct i2c_client *client)
527{
528 struct ds2482_data *data = i2c_get_clientdata(client);
529 int err, idx;
530
531 /* Unregister the 1-wire bridge(s) */
532 for (idx = 0; idx < data->w1_count; idx++) {
533 if (data->w1_ch[idx].pdev != NULL)
534 w1_remove_master_device(&data->w1_ch[idx].w1_bm);
535 }
536
537 /* Detach the i2c device */
538 if ((err = i2c_detach_client(client))) {
539 dev_err(&client->dev,
540 "Deregistration failed, client not detached.\n");
541 return err;
542 }
543
544 /* Free the memory */
545 kfree(data);
546 return 0;
547}
548
549static int __init sensors_ds2482_init(void)
550{
551 return i2c_add_driver(&ds2482_driver);
552}
553
554static void __exit sensors_ds2482_exit(void)
555{
556 i2c_del_driver(&ds2482_driver);
557}
558
559MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
560MODULE_DESCRIPTION("DS2482 driver");
561MODULE_LICENSE("GPL");
562
563module_init(sensors_ds2482_init);
564module_exit(sensors_ds2482_exit);