w1: ds2760_battery: add support for sleep mode feature

This adds support for ds2760's sleep mode feature. With this feature
enabled, the chip enters a deep sleep mode and disconnects from the
battery when the w1 line is held down for more than 2 seconds.

This new behaviour can be switched on and off using a new module
parameter.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>

1 files changed, 5 insertions, 0 deletions

diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
index ea39419172a6..58e774141568 100644
--- a/drivers/w1/slaves/w1_ds2760.h
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -25,6 +25,10 @@
 
 #define DS2760_PROTECTION_REG           0x00
 #define DS2760_STATUS_REG               0x01
+        #define DS2760_STATUS_IE        (1 << 2)
+        #define DS2760_STATUS_SWEN      (1 << 3)
+        #define DS2760_STATUS_RNAOP     (1 << 4)
+        #define DS2760_STATUS_PMOD      (1 << 5)
 #define DS2760_EEPROM_REG               0x07
 #define DS2760_SPECIAL_FEATURE_REG      0x08
 #define DS2760_VOLTAGE_MSB              0x0c
@@ -38,6 +42,7 @@
 #define DS2760_EEPROM_BLOCK0            0x20
 #define DS2760_ACTIVE_FULL              0x20
 #define DS2760_EEPROM_BLOCK1            0x30
+#define DS2760_STATUS_WRITE_REG         0x31
 #define DS2760_RATED_CAPACITY           0x32
 #define DS2760_CURRENT_OFFSET_BIAS      0x33
 #define DS2760_ACTIVE_EMPTY             0x3b