Merge branch 'akpm'

* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c

1 files changed, 308 insertions, 33 deletions

diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0726aecf3b7e..0deb0a8867b7 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -2,6 +2,7 @@
  *
  * (c) 2004 Simtec Electronics
  * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com>
  *
  * Driver for Epson S1D13xxx series framebuffer chips
  *
@@ -10,18 +11,10 @@
  *  linux/drivers/video/epson1355fb.c
  *  linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson)
  *
- * Note, currently only tested on S1D13806 with 16bit CRT.
- * As such, this driver might still contain some hardcoded bits relating to
- * S1D13806.
- * Making it work on other S1D13XXX chips should merely be a matter of adding
- * a few switch()s, some missing glue here and there maybe, and split header
- * files.
- *
  * TODO: - handle dual screen display (CRT and LCD at the same time).
  *       - check_var(), mode change, etc.
- *       - PM untested.
- *       - Accelerated interfaces.
- *       - Probably not SMP safe :)
+ *       - probably not SMP safe :)
+ *       - support all bitblt operations on all cards
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
@@ -31,19 +24,24 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/fb.h>
+#include <linux/spinlock_types.h>
+#include <linux/spinlock.h>
 
 #include <asm/io.h>
 
 #include <video/s1d13xxxfb.h>
 
-#define PFX "s1d13xxxfb: "
+#define PFX     "s1d13xxxfb: "
+#define BLIT    "s1d13xxxfb_bitblt: "
 
+/*
+ * set this to enable debugging on general functions
+ */
 #if 0
 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
 #else
@@ -51,7 +49,21 @@
 #endif
 
 /*
- * List of card production ids
+ * set this to enable debugging on 2D acceleration
+ */
+#if 0
+#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0)
+#else
+#define dbg_blit(fmt, args...) do { } while (0)
+#endif
+
+/*
+ * we make sure only one bitblt operation is running
+ */
+static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock);
+
+/*
+ * list of card production ids
  */
 static const int s1d13xxxfb_prod_ids[] = {
         S1D13505_PROD_ID,
@@ -69,7 +81,7 @@ static const char *s1d13xxxfb_prod_names[] = {
 };
 
 /*
- * Here we define the default struct fb_fix_screeninfo
+ * here we define the default struct fb_fix_screeninfo
  */
 static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = {
         .id             = S1D_FBID,
@@ -145,8 +157,10 @@ crt_enable(struct s1d13xxxfb_par *par, int enable)
         s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
 }
 
-/* framebuffer control routines */
 
+/*************************************************************
+ framebuffer control functions
+ *************************************************************/
 static inline void
 s1d13xxxfb_setup_pseudocolour(struct fb_info *info)
 {
@@ -242,13 +256,13 @@ s1d13xxxfb_set_par(struct fb_info *info)
 }
 
 /**
- *      s1d13xxxfb_setcolreg - sets a color register.
- *      @regno: Which register in the CLUT we are programming
- *      @red: The red value which can be up to 16 bits wide
+ *      s1d13xxxfb_setcolreg - sets a color register.
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
  *      @green: The green value which can be up to 16 bits wide
  *      @blue:  The blue value which can be up to 16 bits wide.
  *      @transp: If supported the alpha value which can be up to 16 bits wide.
- *      @info: frame buffer info structure
+ *      @info: frame buffer info structure
  *
  *      Returns negative errno on error, or zero on success.
  */
@@ -351,15 +365,15 @@ s1d13xxxfb_blank(int blank_mode, struct fb_info *info)
 }
 
 /**
- *      s1d13xxxfb_pan_display - Pans the display.
- *      @var: frame buffer variable screen structure
- *      @info: frame buffer structure that represents a single frame buffer
+ *      s1d13xxxfb_pan_display - Pans the display.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
  *
  *      Pan (or wrap, depending on the `vmode' field) the display using the
- *      `yoffset' field of the `var' structure (`xoffset'  not yet supported).
- *      If the values don't fit, return -EINVAL.
+ *      `yoffset' field of the `var' structure (`xoffset'  not yet supported).
+ *      If the values don't fit, return -EINVAL.
  *
- *      Returns negative errno on error, or zero on success.
+ *      Returns negative errno on error, or zero on success.
  */
 static int
 s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -390,8 +404,259 @@ s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
         return 0;
 }
 
-/* framebuffer information structures */
+/************************************************************
+ functions to handle bitblt acceleration
+ ************************************************************/
+
+/**
+ *      bltbit_wait_bitset - waits for change in register value
+ *      @info : framebuffer structure
+ *      @bit  : value expected in register
+ *      @timeout : ...
+ *
+ *      waits until value changes INTO bit
+ */
+static u8
+bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout)
+{
+        while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) {
+                udelay(10);
+                if (!--timeout) {
+                        dbg_blit("wait_bitset timeout\n");
+                        break;
+                }
+        }
+
+        return timeout;
+}
+
+/**
+ *      bltbit_wait_bitclear - waits for change in register value
+ *      @info : frambuffer structure
+ *      @bit  : value currently in register
+ *      @timeout : ...
+ *
+ *      waits until value changes FROM bit
+ *
+ */
+static u8
+bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout)
+{
+        while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) {
+                udelay(10);
+                if (!--timeout) {
+                        dbg_blit("wait_bitclear timeout\n");
+                        break;
+                }
+        }
+
+        return timeout;
+}
+
+/**
+ *      bltbit_fifo_status - checks the current status of the fifo
+ *      @info : framebuffer structure
+ *
+ *      returns number of free words in buffer
+ */
+static u8
+bltbit_fifo_status(struct fb_info *info)
+{
+        u8 status;
 
+        status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0);
+
+        /* its empty so room for 16 words */
+        if (status & BBLT_FIFO_EMPTY)
+                return 16;
+
+        /* its full so we dont want to add */
+        if (status & BBLT_FIFO_FULL)
+                return 0;
+
+        /* its atleast half full but we can add one atleast */
+        if (status & BBLT_FIFO_NOT_FULL)
+                return 1;
+
+        return 0;
+}
+
+/*
+ *      s1d13xxxfb_bitblt_copyarea - accelerated copyarea function
+ *      @info : framebuffer structure
+ *      @area : fb_copyarea structure
+ *
+ *      supports (atleast) S1D13506
+ *
+ */
+static void
+s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+        u32 dst, src;
+        u32 stride;
+        u16 reverse = 0;
+        u16 sx = area->sx, sy = area->sy;
+        u16 dx = area->dx, dy = area->dy;
+        u16 width = area->width, height = area->height;
+        u16 bpp;
+
+        spin_lock(&s1d13xxxfb_bitblt_lock);
+
+        /* bytes per xres line */
+        bpp = (info->var.bits_per_pixel >> 3);
+        stride = bpp * info->var.xres;
+
+        /* reverse, calculate the last pixel in rectangle */
+        if ((dy > sy) || ((dy == sy) && (dx >= sx))) {
+                dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1)));
+                src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1)));
+                reverse = 1;
+        /* not reverse, calculate the first pixel in rectangle */
+        } else { /* (y * xres) + (bpp * x) */
+                dst = (dy * stride) + (bpp * dx);
+                src = (sy * stride) + (bpp * sx);
+        }
+
+        /* set source adress */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
+
+        /* set destination adress */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
+
+        /* program height and width */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8));
+
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8));
+
+        /* negative direction ROP */
+        if (reverse == 1) {
+                dbg_blit("(copyarea) negative rop\n");
+                s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03);
+        } else /* positive direction ROP */ {
+                s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02);
+                dbg_blit("(copyarea) positive rop\n");
+        }
+
+        /* set for rectangel mode and not linear */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+        /* setup the bpp 1 = 16bpp, 0 = 8bpp*/
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1));
+
+        /* set words per xres */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9));
+
+        dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy);
+        dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy);
+        dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1);
+        dbg_blit("(copyarea) stride=%d\n", stride);
+        dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1),
+                (stride >> 1) & 0xff, stride >> 9);
+
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c);
+
+        /* initialize the engine */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+        /* wait to complete */
+        bltbit_wait_bitclear(info, 0x80, 8000);
+
+        spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/**
+ *
+ *      s1d13xxxfb_bitblt_solidfill - accelerated solidfill function
+ *      @info : framebuffer structure
+ *      @rect : fb_fillrect structure
+ *
+ *      supports (atleast 13506)
+ *
+ **/
+static void
+s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect)
+{
+        u32 screen_stride, dest;
+        u32 fg;
+        u16 bpp = (info->var.bits_per_pixel >> 3);
+
+        /* grab spinlock */
+        spin_lock(&s1d13xxxfb_bitblt_lock);
+
+        /* bytes per x width */
+        screen_stride = (bpp * info->var.xres);
+
+        /* bytes to starting point */
+        dest = ((rect->dy * screen_stride) + (bpp * rect->dx));
+
+        dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n"
+                 "(solidfill) : rect_width=%d, rect_height=%d\n",
+                                rect->dx, rect->dy, screen_stride, dest,
+                                rect->width - 1, rect->height - 1);
+
+        dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n",
+                                info->var.xres, info->var.yres,
+                                info->var.bits_per_pixel);
+        dbg_blit("(solidfill) : rop=%d\n", rect->rop);
+
+        /* We split the destination into the three registers */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff));
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff));
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff));
+
+        /* give information regarding rectangel width */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8));
+
+        /* give information regarding rectangel height */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8));
+
+        if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+                info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+                fg = ((u32 *)info->pseudo_palette)[rect->color];
+                dbg_blit("(solidfill) truecolor/directcolor\n");
+                dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg);
+        } else {
+                fg = rect->color;
+                dbg_blit("(solidfill) color = %d\n", rect->color);
+        }
+
+        /* set foreground color */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff));
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff);
+
+        /* set rectangual region of memory (rectangle and not linear) */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+        /* set operation mode SOLID_FILL */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL);
+
+        /* set bits per pixel (1 = 16bpp, 0 = 8bpp) */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4));
+
+        /* set the memory offset for the bblt in word sizes */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff);
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9));
+
+        /* and away we go.... */
+        s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+        /* wait until its done */
+        bltbit_wait_bitclear(info, 0x80, 8000);
+
+        /* let others play */
+        spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/* framebuffer information structures */
 static struct fb_ops s1d13xxxfb_fbops = {
         .owner          = THIS_MODULE,
         .fb_set_par     = s1d13xxxfb_set_par,
@@ -400,7 +665,7 @@ static struct fb_ops s1d13xxxfb_fbops = {
 
         .fb_pan_display = s1d13xxxfb_pan_display,
 
-        /* to be replaced by any acceleration we can */
+        /* gets replaced at chip detection time */
         .fb_fillrect    = cfb_fillrect,
         .fb_copyarea    = cfb_copyarea,
         .fb_imageblit   = cfb_imageblit,
@@ -412,9 +677,9 @@ static int s1d13xxxfb_width_tab[2][4] __devinitdata = {
 };
 
 /**
- *      s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
+ *      s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
  *      hardware setup.
- *      @info: frame buffer structure
+ *      @info: frame buffer structure
  *
  *      We setup the framebuffer structures according to the current
  *      hardware setup. On some machines, the BIOS will have filled
@@ -569,7 +834,6 @@ s1d13xxxfb_probe(struct platform_device *pdev)
         if (pdata && pdata->platform_init_video)
                 pdata->platform_init_video();
 
-
         if (pdev->num_resources != 2) {
                 dev_err(&pdev->dev, "invalid num_resources: %i\n",
                        pdev->num_resources);
@@ -655,16 +919,27 @@ s1d13xxxfb_probe(struct platform_device *pdev)
 
         info->fix = s1d13xxxfb_fix;
         info->fix.mmio_start = pdev->resource[1].start;
-        info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1;
+        info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start + 1;
         info->fix.smem_start = pdev->resource[0].start;
-        info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1;
+        info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 
         printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
                default_par->regs, info->fix.smem_len / 1024, info->screen_base);
 
         info->par = default_par;
-        info->fbops = &s1d13xxxfb_fbops;
         info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+        info->fbops = &s1d13xxxfb_fbops;
+
+        switch(prod_id) {
+        case S1D13506_PROD_ID:  /* activate acceleration */
+                s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill;
+                s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea;
+                info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+                        FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
+                break;
+        default:
+                break;
+        }
 
         /* perform "manual" chip initialization, if needed */
         if (pdata && pdata->initregs)