uwb: add the UWB stack (build system)

The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>

2 files changed, 48 insertions, 0 deletions

diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644
index 000000000000..3f01a69daf8b
--- /dev/null
+++ b/drivers/uwb/Kconfig
@@ -0,0 +1,28 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+        tristate "Ultra Wide Band devices"
+        depends on PCI
+        default n
+        help
+          UWB is a high-bandwidth, low-power, point-to-point radio
+          technology using a wide spectrum (3.1-10.6GHz). It is
+          optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+          10m). It serves as the transport layer for other protocols,
+          such as Wireless USB (WUSB), IP (WLP) and upcoming
+          Bluetooth and 1394
+
+          The topology is peer to peer; however, higher level
+          protocols (such as WUSB) might impose a master/slave
+          relationship.
+
+          Say Y here if your computer has UWB radio controllers (USB or PCI)
+          based. You will need to enable the radio controllers
+          below.  It is ok to select all of them, no harm done.
+
+          For more help check the UWB and WUSB related files in
+          <file:Documentation/usb/>.
+
+          To compile the UWB stack as a module, choose M here.
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644
index 000000000000..9a67be5ac5c1
--- /dev/null
+++ b/drivers/uwb/Makefile
@@ -0,0 +1,20 @@
+obj-$(CONFIG_UWB)               += uwb.o
+
+uwb-objs :=             \
+        address.o       \
+        beacon.o        \
+        driver.o        \
+        drp.o           \
+        drp-avail.o     \
+        drp-ie.o        \
+        est.o           \
+        ie.o            \
+        lc-dev.o        \
+        lc-rc.o         \
+        neh.o           \
+        pal.o           \
+        reset.o         \
+        rsv.o           \
+        scan.o          \
+        uwb-debug.o     \
+        uwbd.o