Merge 3.8-rc5 into tty-next

This resolves a number of tty driver merge issues found in linux-next

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

45 files changed, 398 insertions, 215 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4c90b510d016..640ae6c6d2d2 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI
         default y if ARCH_W90X900
         default y if ARCH_AT91
         default y if ARCH_MXC
+        default y if ARCH_MXS
         default y if ARCH_OMAP3
         default y if ARCH_CNS3XXX
         default y if ARCH_VT8500
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index caecad9213f5..8e9d31277c43 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -70,6 +70,9 @@ static int host_start(struct ci13xxx *ci)
         else
                 ci->hcd = hcd;
 
+        if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+                hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
         return ret;
 }
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 15b36e2efa85..8ac25adf31b4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1595,6 +1595,9 @@ static const struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
         .driver_info = NO_UNION_NORMAL,
         },
+        { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+        .driver_info = NO_UNION_NORMAL,
+        },
         { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
         .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
         },
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a815fd2cc5e7..957ed2c41482 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
         return ret;
 }
 
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+                        unsigned int link_status)
+{
+        return set_port_feature(hub->hdev,
+                        port1 | (link_status << 3),
+                        USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+        int ret;
+        int total_time;
+        u16 portchange, portstatus;
+
+        if (!hub_is_superspeed(hub->hdev))
+                return -EINVAL;
+
+        ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+        if (ret) {
+                dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+                                port1, ret);
+                return ret;
+        }
+
+        /* Wait for the link to enter the disabled state. */
+        for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+                ret = hub_port_status(hub, port1, &portstatus, &portchange);
+                if (ret < 0)
+                        return ret;
+
+                if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+                                USB_SS_PORT_LS_SS_DISABLED)
+                        break;
+                if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+                        break;
+                msleep(HUB_DEBOUNCE_STEP);
+        }
+        if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+                dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+                                port1, total_time);
+
+        return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
         struct usb_device *hdev = hub->hdev;
@@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
         if (hub->ports[port1 - 1]->child && set_state)
                 usb_set_device_state(hub->ports[port1 - 1]->child,
                                 USB_STATE_NOTATTACHED);
-        if (!hub->error && !hub_is_superspeed(hub->hdev))
-                ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+        if (!hub->error) {
+                if (hub_is_superspeed(hub->hdev))
+                        ret = hub_usb3_port_disable(hub, port1);
+                else
+                        ret = clear_port_feature(hdev, port1,
+                                        USB_PORT_FEAT_ENABLE);
+        }
         if (ret)
                 dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
                                 port1, ret);
@@ -2440,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 #define HUB_SHORT_RESET_TIME    10
 #define HUB_BH_RESET_TIME       50
 #define HUB_LONG_RESET_TIME     200
-#define HUB_RESET_TIMEOUT       500
+#define HUB_RESET_TIMEOUT       800
 
 static int hub_port_reset(struct usb_hub *hub, int port1,
                         struct usb_device *udev, unsigned int delay, bool warm);
@@ -2475,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                 if (ret < 0)
                         return ret;
 
+                /* The port state is unknown until the reset completes. */
+                if ((portstatus & USB_PORT_STAT_RESET))
+                        goto delay;
+
                 /*
                  * Some buggy devices require a warm reset to be issued even
                  * when the port appears not to be connected.
@@ -2520,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                         if ((portchange & USB_PORT_STAT_C_CONNECTION))
                                 return -ENOTCONN;
 
-                        /* if we`ve finished resetting, then break out of
-                         * the loop
-                         */
-                        if (!(portstatus & USB_PORT_STAT_RESET) &&
-                            (portstatus & USB_PORT_STAT_ENABLE)) {
+                        if ((portstatus & USB_PORT_STAT_ENABLE)) {
                                 if (hub_is_wusb(hub))
                                         udev->speed = USB_SPEED_WIRELESS;
                                 else if (hub_is_superspeed(hub->hdev))
@@ -2538,10 +2597,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                                 return 0;
                         }
                 } else {
-                        if (portchange & USB_PORT_STAT_C_BH_RESET)
-                                return 0;
+                        if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+                                        hub_port_warm_reset_required(hub,
+                                                portstatus))
+                                return -ENOTCONN;
+
+                        return 0;
                 }
 
+delay:
                 /* switch to the long delay after two short delay failures */
                 if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
                         delay = HUB_LONG_RESET_TIME;
@@ -2565,14 +2629,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
                         msleep(10 + 40);
                         update_devnum(udev, 0);
                         hcd = bus_to_hcd(udev->bus);
-                        if (hcd->driver->reset_device) {
-                                *status = hcd->driver->reset_device(hcd, udev);
-                                if (*status < 0) {
-                                        dev_err(&udev->dev, "Cannot reset "
-                                                        "HCD device state\n");
-                                        break;
-                                }
-                        }
+                        /* The xHC may think the device is already reset,
+                         * so ignore the status.
+                         */
+                        if (hcd->driver->reset_device)
+                                hcd->driver->reset_device(hcd, udev);
                 }
                 /* FALL THROUGH */
         case -ENOTCONN:
@@ -2580,16 +2641,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
                 clear_port_feature(hub->hdev,
                                 port1, USB_PORT_FEAT_C_RESET);
                 /* FIXME need disconnect() for NOTATTACHED device */
-                if (warm) {
+                if (hub_is_superspeed(hub->hdev)) {
                         clear_port_feature(hub->hdev, port1,
                                         USB_PORT_FEAT_C_BH_PORT_RESET);
                         clear_port_feature(hub->hdev, port1,
                                         USB_PORT_FEAT_C_PORT_LINK_STATE);
-                } else {
+                }
+                if (!warm)
                         usb_set_device_state(udev, *status
                                         ? USB_STATE_NOTATTACHED
                                         : USB_STATE_DEFAULT);
-                }
                 break;
         }
 }
@@ -2939,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 static int finish_port_resume(struct usb_device *udev)
 {
         int     status = 0;
-        u16     devstatus;
+        u16     devstatus = 0;
 
         /* caller owns the udev device lock */
         dev_dbg(&udev->dev, "%s\n",
@@ -2984,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev)
         if (status) {
                 dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
                                 status);
-        } else if (udev->actconfig) {
+        /*
+         * There are a few quirky devices which violate the standard
+         * by claiming to have remote wakeup enabled after a reset,
+         * which crash if the feature is cleared, hence check for
+         * udev->reset_resume
+         */
+        } else if (udev->actconfig && !udev->reset_resume) {
                 le16_to_cpus(&devstatus);
                 if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
                         status = usb_control_msg(udev,
@@ -4638,9 +4705,14 @@ static void hub_events(void)
                          * SS.Inactive state.
                          */
                         if (hub_port_warm_reset_required(hub, portstatus)) {
+                                int status;
+
                                 dev_dbg(hub_dev, "warm reset port %d\n", i);
-                                hub_port_reset(hub, i, NULL,
+                                status = hub_port_reset(hub, i, NULL,
                                                 HUB_BH_RESET_TIME, true);
+                                if (status < 0)
+                                        hub_port_disable(hub, i, 1);
+                                connect_change = 0;
                         }
 
                         if (connect_change)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index fdefd9c7f7af..3113c1d71442 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* Creative SB Audigy 2 NX */
         { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+        /* Microsoft LifeCam-VX700 v2.0 */
+        { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
         /* Logitech Quickcam Fusion */
         { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 92604b4f9712..5945aadaa1c9 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -56,7 +56,7 @@
 #define dump_register(nm)                               \
 {                                                       \
         .name   = __stringify(nm),                      \
-        .offset = DWC3_ ##nm,                           \
+        .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \
 }
 
 static const struct debugfs_reg32 dwc3_regs[] = {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2e43b332aae8..2fdd767f8fe8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1605,6 +1605,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 
                 if (epnum == 0 || epnum == 1) {
                         dep->endpoint.maxpacket = 512;
+                        dep->endpoint.maxburst = 1;
                         dep->endpoint.ops = &dwc3_gadget_ep0_ops;
                         if (!epnum)
                                 dwc->gadget.ep0 = &dep->endpoint;
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index fc0ec5e0d58e..d9f6b9372491 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3231,7 +3231,7 @@ static int udc_pci_probe(
         }
 
         if (!pdev->irq) {
-                dev_err(&dev->pdev->dev, "irq not set\n");
+                dev_err(&pdev->dev, "irq not set\n");
                 kfree(dev);
                 dev = NULL;
                 retval = -ENODEV;
@@ -3250,7 +3250,7 @@ static int udc_pci_probe(
         dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
 
         if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
-                dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+                dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
                 kfree(dev);
                 dev = NULL;
                 retval = -EBUSY;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 95d584dbed13..8cf0c0f6fa1f 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -130,10 +130,7 @@ static const char ep0name[] = "ep0";
 static const char *const ep_name[] = {
         ep0name,                                /* everyone has ep0 */
 
-        /* act like a net2280: high speed, six configurable endpoints */
-        "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
-
-        /* or like pxa250: fifteen fixed function endpoints */
+        /* act like a pxa250: fifteen fixed function endpoints */
         "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
         "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
         "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
@@ -141,6 +138,10 @@ static const char *const ep_name[] = {
 
         /* or like sa1100: two fixed function endpoints */
         "ep1out-bulk", "ep2in-bulk",
+
+        /* and now some generic EPs so we have enough in multi config */
+        "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
+        "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
 };
 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a6961c517f2..8c2f25121149 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1153,15 +1153,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
                                         pr_err("%s: unmapped value: %lu\n", opts, value);
                                         return -EINVAL;
                                 }
-                        }
-                        else if (!memcmp(opts, "gid", 3))
+                        } else if (!memcmp(opts, "gid", 3)) {
                                 data->perms.gid = make_kgid(current_user_ns(), value);
                                 if (!gid_valid(data->perms.gid)) {
                                         pr_err("%s: unmapped value: %lu\n", opts, value);
                                         return -EINVAL;
                                 }
-                        else
+                        } else {
                                 goto invalid;
+                        }
                         break;
 
                 default:
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086426bd..d3bd7b095ba3 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,14 +18,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_per_clk;
 static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET       0x608
+#define MX35_USBPHYCTRL_OFFSET          0x600
+#define USBPHYCTRL_OTGBASE_OFFSET       0x8
 #define USBPHYCTRL_EVDO                 (1 << 23)
 
 int fsl_udc_clk_init(struct platform_device *pdev)
@@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
         clk_prepare_enable(mxc_per_clk);
 
         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-        if (!cpu_is_mx51()) {
+        if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
                 freq = clk_get_rate(mxc_per_clk);
                 if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
                     (freq < 59999000 || freq > 60001000)) {
@@ -79,27 +78,40 @@ eclkrate:
         return ret;
 }
 
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+int fsl_udc_clk_finalize(struct platform_device *pdev)
 {
         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-        if (cpu_is_mx35()) {
-                unsigned int v;
+        int ret = 0;
 
-                /* workaround ENGcm09152 for i.MX35 */
-                if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-                        v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-                                        USBPHYCTRL_OTGBASE_OFFSET));
-                        writel(v | USBPHYCTRL_EVDO,
-                                MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-                                        USBPHYCTRL_OTGBASE_OFFSET));
+        /* workaround ENGcm09152 for i.MX35 */
+        if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+                unsigned int v;
+                struct resource *res = platform_get_resource
+                        (pdev, IORESOURCE_MEM, 0);
+                void __iomem *phy_regs = ioremap(res->start +
+                                                MX35_USBPHYCTRL_OFFSET, 512);
+                if (!phy_regs) {
+                        dev_err(&pdev->dev, "ioremap for phy address fails\n");
+                        ret = -EINVAL;
+                        goto ioremap_err;
                 }
+
+                v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
+                writel(v | USBPHYCTRL_EVDO,
+                        phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
+
+                iounmap(phy_regs);
         }
 
+
+ioremap_err:
         /* ULPI transceivers don't need usbpll */
         if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
                 clk_disable_unprepare(mxc_per_clk);
                 mxc_per_clk = NULL;
         }
+
+        return ret;
 }
 
 void fsl_udc_clk_release(void)
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f13790b..667275cb7bad 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
         unsigned int i;
         u32 dccparams;
 
-        if (strcmp(pdev->name, driver_name)) {
-                VDBG("Wrong device");
-                return -ENODEV;
-        }
-
         udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
         if (udc_controller == NULL) {
                 ERR("malloc udc failed\n");
@@ -2547,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
                 dr_controller_setup(udc_controller);
         }
 
-        fsl_udc_clk_finalize(pdev);
+        ret = fsl_udc_clk_finalize(pdev);
+        if (ret)
+                goto err_free_irq;
 
         /* Setup gadget structure */
         udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2756,22 +2754,32 @@ static int fsl_udc_otg_resume(struct device *dev)
 
         return fsl_udc_resume(NULL);
 }
-
 /*-------------------------------------------------------------------------
         Register entry point for the peripheral controller driver
 --------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+        {
+                .name = "imx-udc-mx27",
+        }, {
+                .name = "imx-udc-mx51",
+        }, {
+                /* sentinel */
+        }
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
-        .remove  = __exit_p(fsl_udc_remove),
+        .remove         = __exit_p(fsl_udc_remove),
+        /* Just for FSL i.mx SoC currently */
+        .id_table       = fsl_udc_devtype,
         /* these suspend and resume are not usb suspend and resume */
-        .suspend = fsl_udc_suspend,
-        .resume  = fsl_udc_resume,
-        .driver  = {
-                .name = (char *)driver_name,
-                .owner = THIS_MODULE,
-                /* udc suspend/resume called from OTG driver */
-                .suspend = fsl_udc_otg_suspend,
-                .resume  = fsl_udc_otg_resume,
+        .suspend        = fsl_udc_suspend,
+        .resume         = fsl_udc_resume,
+        .driver         = {
+                        .name = (char *)driver_name,
+                        .owner = THIS_MODULE,
+                        /* udc suspend/resume called from OTG driver */
+                        .suspend = fsl_udc_otg_suspend,
+                        .resume  = fsl_udc_otg_resume,
         },
 };
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967f7082..c6703bb07b23 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
 struct platform_device;
 #ifdef CONFIG_ARCH_MXC
 int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_finalize(struct platform_device *pdev);
 void fsl_udc_clk_release(void);
 #else
 static inline int fsl_udc_clk_init(struct platform_device *pdev)
 {
         return 0;
 }
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline int fsl_udc_clk_finalize(struct platform_device *pdev)
 {
+        return 0;
 }
 static inline void fsl_udc_clk_release(void)
 {
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 379aac7b82fc..6e8b1272ebce 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1012,7 +1012,7 @@ static void udc_clock_enable(struct mv_udc *udc)
         unsigned int i;
 
         for (i = 0; i < udc->clknum; i++)
-                clk_enable(udc->clk[i]);
+                clk_prepare_enable(udc->clk[i]);
 }
 
 static void udc_clock_disable(struct mv_udc *udc)
@@ -1020,7 +1020,7 @@ static void udc_clock_disable(struct mv_udc *udc)
         unsigned int i;
 
         for (i = 0; i < udc->clknum; i++)
-                clk_disable(udc->clk[i]);
+                clk_disable_unprepare(udc->clk[i]);
 }
 
 static void udc_stop(struct mv_udc *udc)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 141971d9051e..439c3f972f8c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3477,12 +3477,11 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 /**
  * s3c_hsotg_release - release callback for hsotg device
  * @dev: Device to for which release is called
+ *
+ * Nothing to do as the resource is allocated using devm_ API.
  */
 static void s3c_hsotg_release(struct device *dev)
 {
-        struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
-
-        kfree(hsotg);
 }
 
 /**
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 4f7f76f00c74..7cacd6ae818e 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg)
         tpg->tpg_nexus = NULL;
 
         kfree(tv_nexus);
+        ret = 0;
 out:
         mutex_unlock(&tpg->tpg_mutex);
-        return 0;
+        return ret;
 }
 
 static ssize_t tcm_usbg_tpg_store_nexus(
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index ca4fc3d3e7ff..46b1cc773ab8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -884,7 +884,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
         pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
                         port->port_num, tty, file);
 
-        wake_up_interruptible(&port->port.close_wait);
+        wake_up(&port->port.close_wait);
 exit:
         spin_unlock_irq(&port->port_lock);
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d6bb128ce21e..3a21c5d683c0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -148,7 +148,7 @@ config USB_EHCI_FSL
           Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_MXC
-        bool "Support for Freescale i.MX on-chip EHCI USB controller"
+        tristate "Support for Freescale i.MX on-chip EHCI USB controller"
         depends on USB_EHCI_HCD && ARCH_MXC
         select USB_EHCI_ROOT_HUB_TT
         ---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1eb4c3006e9e..001fbff2fdef 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI)		+= pci-quirks.o
 obj-$(CONFIG_USB_EHCI_HCD)      += ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)      += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)     += ehci-platform.o
+obj-$(CONFIG_USB_EHCI_MXC)      += ehci-mxc.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD)  += oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)   += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index fd9b5424b860..d81d2fcbff18 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
         switch (phy_mode) {
         case FSL_USB2_PHY_ULPI:
-                if (pdata->controller_ver) {
+                if (pdata->have_sysif_regs && pdata->controller_ver) {
                         /* controller version 1.6 or above */
                         setbits32(non_ehci + FSL_SOC_USB_CTRL,
                                         ULPI_PHY_CLK_SEL);
@@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                 portsc |= PORT_PTS_PTW;
                 /* fall through */
         case FSL_USB2_PHY_UTMI:
-                if (pdata->controller_ver) {
+                if (pdata->have_sysif_regs && pdata->controller_ver) {
                         /* controller version 1.6 or above */
                         setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                         mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
@@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                 break;
         }
 
-        if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+        if (pdata->have_sysif_regs && pdata->controller_ver &&
+            (phy_mode == FSL_USB2_PHY_ULPI)) {
                 /* check PHY_CLK_VALID to get phy clk valid */
                 if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
                                 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 
-        if (phy_mode != FSL_USB2_PHY_ULPI)
+        if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
                 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
 
         return 0;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c97503bb0b0e..09537b2f1002 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -74,10 +74,6 @@ static const char	hcd_name [] = "ehci_hcd";
 #undef VERBOSE_DEBUG
 #undef EHCI_URB_TRACE
 
-#ifdef DEBUG
-#define EHCI_STATS
-#endif
-
 /* magic numbers that can affect system performance */
 #define EHCI_TUNE_CERR          3       /* 0-3 qtd retries; 0 == don't stop */
 #define EHCI_TUNE_RL_HS         4       /* nak throttle; see 4.9 */
@@ -1250,11 +1246,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_fsl_driver
 #endif
 
-#ifdef CONFIG_USB_EHCI_MXC
-#include "ehci-mxc.c"
-#define PLATFORM_DRIVER         ehci_mxc_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_SH
 #include "ehci-sh.c"
 #define PLATFORM_DRIVER         ehci_hcd_sh_driver
@@ -1352,7 +1343,8 @@ MODULE_LICENSE ("GPL");
 
 #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
         !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
-        !defined(CONFIG_USB_CHIPIDEA_HOST) && \
+        !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
+        !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
         !defined(PLATFORM_DRIVER) && \
         !defined(PS3_SYSTEM_BUS_DRIVER) && \
         !defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index f7bfc0b898b9..6c56297ea16b 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
         unsigned int i;
 
         for (i = 0; i < ehci_mv->clknum; i++)
-                clk_enable(ehci_mv->clk[i]);
+                clk_prepare_enable(ehci_mv->clk[i]);
 }
 
 static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
@@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
         unsigned int i;
 
         for (i = 0; i < ehci_mv->clknum; i++)
-                clk_disable(ehci_mv->clk[i]);
+                clk_disable_unprepare(ehci_mv->clk[i]);
 }
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index ec7f5d2c90de..dedb80bb8d40 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -17,75 +17,38 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include <linux/platform_data/usb-ehci-mxc.h>
 
 #include <asm/mach-types.h>
 
+#include "ehci.h"
+
+#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
+
+static const char hcd_name[] = "ehci-mxc";
+
 #define ULPI_VIEWPORT_OFFSET    0x170
 
 struct ehci_mxc_priv {
         struct clk *usbclk, *ahbclk, *phyclk;
-        struct usb_hcd *hcd;
 };
 
-/* called during probe() after chip reset completes */
-static int ehci_mxc_setup(struct usb_hcd *hcd)
-{
-        hcd->has_tt = 1;
-
-        return ehci_setup(hcd);
-}
+static struct hc_driver __read_mostly ehci_mxc_hc_driver;
 
-static const struct hc_driver ehci_mxc_hc_driver = {
-        .description = hcd_name,
-        .product_desc = "Freescale On-Chip EHCI Host Controller",
-        .hcd_priv_size = sizeof(struct ehci_hcd),
-
-        /*
-         * generic hardware linkage
-         */
-        .irq = ehci_irq,
-        .flags = HCD_USB2 | HCD_MEMORY,
-
-        /*
-         * basic lifecycle operations
-         */
-        .reset = ehci_mxc_setup,
-        .start = ehci_run,
-        .stop = ehci_stop,
-        .shutdown = ehci_shutdown,
-
-        /*
-         * managing i/o requests and associated device resources
-         */
-        .urb_enqueue = ehci_urb_enqueue,
-        .urb_dequeue = ehci_urb_dequeue,
-        .endpoint_disable = ehci_endpoint_disable,
-        .endpoint_reset = ehci_endpoint_reset,
-
-        /*
-         * scheduling support
-         */
-        .get_frame_number = ehci_get_frame,
-
-        /*
-         * root hub support
-         */
-        .hub_status_data = ehci_hub_status_data,
-        .hub_control = ehci_hub_control,
-        .bus_suspend = ehci_bus_suspend,
-        .bus_resume = ehci_bus_resume,
-        .relinquish_port = ehci_relinquish_port,
-        .port_handed_over = ehci_port_handed_over,
-
-        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = {
+        .extra_priv_size =      sizeof(struct ehci_mxc_priv),
 };
 
 static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -112,12 +75,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
         if (!hcd)
                 return -ENOMEM;
 
-        priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-        if (!priv) {
-                ret = -ENOMEM;
-                goto err_alloc;
-        }
-
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res) {
                 dev_err(dev, "Found HC with no register addr. Check setup!\n");
@@ -135,6 +92,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
                 goto err_alloc;
         }
 
+        hcd->has_tt = 1;
+        ehci = hcd_to_ehci(hcd);
+        priv = (struct ehci_mxc_priv *) ehci->priv;
+
         /* enable clocks */
         priv->usbclk = devm_clk_get(&pdev->dev, "ipg");
         if (IS_ERR(priv->usbclk)) {
@@ -169,8 +130,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
                 mdelay(10);
         }
 
-        ehci = hcd_to_ehci(hcd);
-
         /* EHCI registers start at offset 0x100 */
         ehci->caps = hcd->regs + 0x100;
         ehci->regs = hcd->regs + 0x100 +
@@ -198,8 +157,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
                 }
         }
 
-        priv->hcd = hcd;
-        platform_set_drvdata(pdev, priv);
+        platform_set_drvdata(pdev, hcd);
 
         ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
         if (ret)
@@ -244,8 +202,11 @@ err_alloc:
 static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 {
         struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
-        struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = priv->hcd;
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+        struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv;
+
+        usb_remove_hcd(hcd);
 
         if (pdata && pdata->exit)
                 pdata->exit(pdev);
@@ -253,23 +214,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
         if (pdata->otg)
                 usb_phy_shutdown(pdata->otg);
 
-        usb_remove_hcd(hcd);
-        usb_put_hcd(hcd);
-        platform_set_drvdata(pdev, NULL);
-
         clk_disable_unprepare(priv->usbclk);
         clk_disable_unprepare(priv->ahbclk);
 
         if (priv->phyclk)
                 clk_disable_unprepare(priv->phyclk);
 
+        usb_put_hcd(hcd);
+        platform_set_drvdata(pdev, NULL);
         return 0;
 }
 
 static void ehci_mxc_drv_shutdown(struct platform_device *pdev)
 {
-        struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = priv->hcd;
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
         if (hcd->driver->shutdown)
                 hcd->driver->shutdown(hcd);
@@ -279,9 +237,31 @@ MODULE_ALIAS("platform:mxc-ehci");
 
 static struct platform_driver ehci_mxc_driver = {
         .probe = ehci_mxc_drv_probe,
-        .remove = __exit_p(ehci_mxc_drv_remove),
+        .remove = ehci_mxc_drv_remove,
         .shutdown = ehci_mxc_drv_shutdown,
         .driver = {
                    .name = "mxc-ehci",
         },
 };
+
+static int __init ehci_mxc_init(void)
+{
+        if (usb_disabled())
+                return -ENODEV;
+
+        pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+        ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides);
+        return platform_driver_register(&ehci_mxc_driver);
+}
+module_init(ehci_mxc_init);
+
+static void __exit ehci_mxc_cleanup(void)
+{
+        platform_driver_unregister(&ehci_mxc_driver);
+}
+module_exit(ehci_mxc_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index dabb20494826..170b9399e09f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -200,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         }
 
+        /* optional debug port, normally in the first BAR */
+        temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+        if (temp) {
+                pci_read_config_dword(pdev, temp, &temp);
+                temp >>= 16;
+                if (((temp >> 13) & 7) == 1) {
+                        u32 hcs_params = ehci_readl(ehci,
+                                                    &ehci->caps->hcs_params);
+
+                        temp &= 0x1fff;
+                        ehci->debug = hcd->regs + temp;
+                        temp = ehci_readl(ehci, &ehci->debug->control);
+                        ehci_info(ehci, "debug port %d%s\n",
+                                  HCS_DEBUG_PORT(hcs_params),
+                                  (temp & DBGP_ENABLED) ? " IN USE" : "");
+                        if (!(temp & DBGP_ENABLED))
+                                ehci->debug = NULL;
+                }
+        }
+
         retval = ehci_setup(hcd);
         if (retval)
                 return retval;
@@ -228,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 break;
         }
 
-        /* optional debug port, normally in the first BAR */
-        temp = pci_find_capability(pdev, 0x0a);
-        if (temp) {
-                pci_read_config_dword(pdev, temp, &temp);
-                temp >>= 16;
-                if ((temp & (3 << 13)) == (1 << 13)) {
-                        temp &= 0x1fff;
-                        ehci->debug = hcd->regs + temp;
-                        temp = ehci_readl(ehci, &ehci->debug->control);
-                        ehci_info(ehci, "debug port %d%s\n",
-                                HCS_DEBUG_PORT(ehci->hcs_params),
-                                (temp & DBGP_ENABLED)
-                                        ? " IN USE"
-                                        : "");
-                        if (!(temp & DBGP_ENABLED))
-                                ehci->debug = NULL;
-                }
-        }
-
         /* at least the Genesys GL880S needs fixup here */
         temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
         temp &= 0x0f;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 9dadc7118d68..36c3a8210595 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16;
 #endif
 
 /* statistics can be kept for tuning/monitoring */
+#ifdef DEBUG
+#define EHCI_STATS
+#endif
+
 struct ehci_stats {
         /* irq usage */
         unsigned long           normal;
@@ -221,6 +225,9 @@ struct ehci_hcd {			/* one per controller */
 #ifdef DEBUG
         struct dentry           *debug_dir;
 #endif
+
+        /* platform-specific data -- must come last */
+        unsigned long           priv[0] __aligned(sizeof(s64));
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 5105127c1d4b..11e0b79ff9d5 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np)
                         return ver;
         }
 
+        if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+                return FSL_USB_VER_OLD;
+
         if (of_device_is_compatible(np, "fsl-usb2-mph")) {
                 if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
                         ver = FSL_USB_VER_1_6;
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index bd6a7447ccc9..f0ebe8e7c58b 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -58,6 +58,7 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include "imx21-hcd.h"
 
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index d370245a4ee2..5e3a6deb62b1 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev)
         tmio_iowrite8(2, tmio->ccr + CCR_INTC);
 
         dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
-                        tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+                        tmio_ioread8(tmio->ccr + CCR_REVID),
+                        (u64) hcd->rsrc_start, hcd->irq);
 }
 
 static int ohci_tmio_start(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4b9e9aba2665..4f64d24eebc8 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -447,6 +447,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
                 return IRQ_NONE;
         uhci_writew(uhci, status, USBSTS);              /* Clear it */
 
+        spin_lock(&uhci->lock);
+        if (unlikely(!uhci->is_initialized))    /* not yet configured */
+                goto done;
+
         if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
                 if (status & USBSTS_HSE)
                         dev_err(uhci_dev(uhci), "host system error, "
@@ -455,7 +459,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
                         dev_err(uhci_dev(uhci), "host controller process "
                                         "error, something bad happened!\n");
                 if (status & USBSTS_HCH) {
-                        spin_lock(&uhci->lock);
                         if (uhci->rh_state >= UHCI_RH_RUNNING) {
                                 dev_err(uhci_dev(uhci),
                                         "host controller halted, "
@@ -473,15 +476,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
                                  * pending unlinks */
                                 mod_timer(&hcd->rh_timer, jiffies);
                         }
-                        spin_unlock(&uhci->lock);
                 }
         }
 
-        if (status & USBSTS_RD)
+        if (status & USBSTS_RD) {
+                spin_unlock(&uhci->lock);
                 usb_hcd_poll_rh_status(hcd);
-        else {
-                spin_lock(&uhci->lock);
+        } else {
                 uhci_scan_schedule(uhci);
+ done:
                 spin_unlock(&uhci->lock);
         }
 
@@ -662,9 +665,9 @@ static int uhci_start(struct usb_hcd *hcd)
          */
         mb();
 
+        spin_lock_irq(&uhci->lock);
         configure_hc(uhci);
         uhci->is_initialized = 1;
-        spin_lock_irq(&uhci->lock);
         start_rh(uhci);
         spin_unlock_irq(&uhci->lock);
         return 0;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a686cf4905bb..68914429482f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                         break;
                 case USB_PORT_FEAT_LINK_STATE:
                         temp = xhci_readl(xhci, port_array[wIndex]);
+
+                        /* Disable port */
+                        if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+                                xhci_dbg(xhci, "Disable port %d\n", wIndex);
+                                temp = xhci_port_state_to_neutral(temp);
+                                /*
+                                 * Clear all change bits, so that we get a new
+                                 * connection event.
+                                 */
+                                temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+                                        PORT_OCC | PORT_RC | PORT_PLC |
+                                        PORT_CEC;
+                                xhci_writel(xhci, temp | PORT_PE,
+                                        port_array[wIndex]);
+                                temp = xhci_readl(xhci, port_array[wIndex]);
+                                break;
+                        }
+
+                        /* Put link in RxDetect (enable port) */
+                        if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+                                xhci_dbg(xhci, "Enable port %d\n", wIndex);
+                                xhci_set_link_state(xhci, port_array, wIndex,
+                                                link_state);
+                                temp = xhci_readl(xhci, port_array[wIndex]);
+                                break;
+                        }
+
                         /* Software should not attempt to set
-                         * port link state above '5' (Rx.Detect) and the port
+                         * port link state above '3' (U3) and the port
                          * must be enabled.
                          */
                         if ((temp & PORT_PE) == 0 ||
-                                (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+                                (link_state > USB_SS_PORT_LS_U3)) {
                                 xhci_warn(xhci, "Cannot set link state.\n");
                                 goto error;
                         }
@@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
         int max_ports;
         __le32 __iomem **port_array;
         struct xhci_bus_state *bus_state;
+        bool reset_change = false;
 
         max_ports = xhci_get_ports(hcd, &port_array);
         bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
                         buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
                         status = 1;
                 }
+                if ((temp & PORT_RC))
+                        reset_change = true;
+        }
+        if (!status && !reset_change) {
+                xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+                clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
         }
         spin_unlock_irqrestore(&xhci->lock, flags);
         return status ? retval : 0;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fb51c7085ad0..35616ffbe3ae 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
 static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
+        if (ep->desc.bInterval == 0)
+                return 0;
         return xhci_microframes_to_exponent(udev, ep,
                         ep->desc.bInterval, 0, 15);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cbb44b7b9d65..59fb5c677dbe 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1725,6 +1725,15 @@ cleanup:
         if (bogus_port_status)
                 return;
 
+        /*
+         * xHCI port-status-change events occur when the "or" of all the
+         * status-change bits in the portsc register changes from 0 to 1.
+         * New status changes won't cause an event if any other change
+         * bits are still set.  When an event occurs, switch over to
+         * polling to avoid losing status changes.
+         */
+        xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+        set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
         spin_unlock(&xhci->lock);
         /* Pass this up to the core */
         usb_hcd_poll_rh_status(hcd);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5c72c431bab1..f1f01a834ba7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -884,6 +884,11 @@ int xhci_suspend(struct xhci_hcd *xhci)
                         xhci->shared_hcd->state != HC_STATE_SUSPENDED)
                 return -EINVAL;
 
+        /* Don't poll the roothubs on bus suspend. */
+        xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+        clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+        del_timer_sync(&hcd->rh_timer);
+
         spin_lock_irq(&xhci->lock);
         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -1069,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
         if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
                 compliance_mode_recovery_timer_init(xhci);
 
+        /* Re-enable port polling. */
+        xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+        set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+        usb_hcd_poll_rh_status(hcd);
+
         return retval;
 }
 #endif  /* CONFIG_PM */
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 7667b12f2ff5..268148de9714 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -2179,7 +2179,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
                 if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
                         break;
                 retval = 0;
-                dev_info(&intf->dev, "TEST 17:  unlink from %d queues of "
+                dev_info(&intf->dev, "TEST 24:  unlink from %d queues of "
                                 "%d %d-byte writes\n",
                                 param->iterations, param->sglen, param->length);
                 for (i = param->iterations; retval == 0 && i > 0; --i) {
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 0968dd7a859d..f522000e8f06 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
         musb_writel(&tx->tx_complete, 0, ptr);
 }
 
-static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
 {
         int     j;
 
@@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c)
         c->last_processed = NULL;
 }
 
-static int __init cppi_controller_start(struct dma_controller *c)
+static int cppi_controller_start(struct dma_controller *c)
 {
         struct cppi     *controller;
         void __iomem    *tibase;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index f1c6c5470b92..fd3486745e64 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2298,10 +2298,7 @@ static int __init musb_init(void)
         if (usb_disabled())
                 return 0;
 
-        pr_info("%s: version " MUSB_VERSION ", "
-                "?dma?"
-                ", "
-                "otg (peripheral+host)",
+        pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
                 musb_driver_name);
         return platform_driver_register(&musb_driver);
 }
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index e6f2ae8368bb..f7d764de6fda 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -134,6 +134,11 @@ static const resource_size_t dsps_control_module_phys[] = {
         DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
 };
 
+#define USBPHY_CM_PWRDN         (1 << 0)
+#define USBPHY_OTG_PWRDN        (1 << 1)
+#define USBPHY_OTGVDET_EN       (1 << 19)
+#define USBPHY_OTGSESSEND_EN    (1 << 20)
+
 /**
  * musb_dsps_phy_control - phy on/off
  * @glue: struct dsps_glue *
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062d5d1b..37962c99ff1e 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -110,7 +110,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
         bool "Freescale USB OTG Transceiver Driver"
-        depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
+        depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
         select USB_OTG
         select USB_OTG_UTILS
         help
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index 1dd57504186d..eace975991a8 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg)
         unsigned int i;
 
         for (i = 0; i < mvotg->clknum; i++)
-                clk_enable(mvotg->clk[i]);
+                clk_prepare_enable(mvotg->clk[i]);
 }
 
 static void otg_clock_disable(struct mv_otg *mvotg)
@@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg)
         unsigned int i;
 
         for (i = 0; i < mvotg->clknum; i++)
-                clk_disable(mvotg->clk[i]);
+                clk_disable_unprepare(mvotg->clk[i]);
 }
 
 static int mv_otg_enable_internal(struct mv_otg *mvotg)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index dd41f61893ef..f2985cd88021 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
         return 0;
 }
 
-static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
-{
-        int i;
-        struct usbhsg_uep *uep;
-
-        usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
-                uep->pipe = NULL;
-}
-
 /*
  *
  *              usb_ep_ops
@@ -610,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep)
 {
         struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
 
-        return usbhsg_pipe_disable(uep);
+        usbhsg_pipe_disable(uep);
+
+        uep->pipe->mod_private  = NULL;
+        uep->pipe               = NULL;
+
+        return 0;
 }
 
 static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
@@ -761,9 +757,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
         usbhs_pipe_init(priv,
                         usbhsg_dma_map_ctrl);
         usbhs_fifo_init(priv);
-        usbhsg_uep_init(gpriv);
 
-        /* dcp init */
+        /* dcp init instead of usbhsg_ep_enable() */
         dcp->pipe               = usbhs_dcp_malloc(priv);
         dcp->pipe->mod_private  = dcp;
         usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
@@ -825,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
         usbhs_sys_set_test_mode(priv, 0);
         usbhs_sys_function_ctrl(priv, 0);
 
-        usbhsg_pipe_disable(dcp);
+        usbhsg_ep_disable(&dcp->ep);
 
         dev_dbg(dev, "stop gadget\n");
 
@@ -998,6 +993,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
          */
         usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
                 uep->gpriv      = gpriv;
+                uep->pipe       = NULL;
                 snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
 
                 uep->ep.name            = uep->ep_name;
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 3d3cd6ca2689..b86815421c8d 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -661,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
                 status = -ESHUTDOWN;
 
         urb->actual_length = pkt->actual;
-        usbhsh_ureq_free(hpriv, ureq);
 
         usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
+        usbhsh_ureq_free(hpriv, ureq);
+
         usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
 
         usb_hcd_unlink_urb_from_ep(hcd, urb);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a96083b7fabc..eaa038d032b8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -875,6 +875,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+        /* Crucible Devices */
+        { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 049b6e715fa4..fa5d56038276 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1259,3 +1259,9 @@
  * ATI command output: Cinterion MC55i
  */
 #define FTDI_CINTERION_MC55I_PID        0xA951
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID       0x8e08
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d6485be49ebf..b5ab0a54b6b6 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -530,6 +530,9 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
         wait_queue_t wait;
         unsigned long flags;
 
+        if (!tty)
+                return;
+
         if (!timeout)
                 timeout = (HZ * EDGE_CLOSING_WAIT)/100;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e6f87b76c715..0d9dac9e7f93 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -288,6 +288,7 @@ static void option_instat_callback(struct urb *urb);
 #define ALCATEL_VENDOR_ID                       0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200              0x0000
 #define ALCATEL_PRODUCT_X220_X500D              0x0017
+#define ALCATEL_PRODUCT_L100V                   0x011e
 
 #define PIRELLI_VENDOR_ID                       0x1266
 #define PIRELLI_PRODUCT_C100_1                  0x1002
@@ -429,9 +430,12 @@ static void option_instat_callback(struct urb *urb);
 #define MEDIATEK_VENDOR_ID                      0x0e8d
 #define MEDIATEK_PRODUCT_DC_1COM                0x00a0
 #define MEDIATEK_PRODUCT_DC_4COM                0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2               0x00a7
 #define MEDIATEK_PRODUCT_DC_5COM                0x00a4
 #define MEDIATEK_PRODUCT_7208_1COM              0x7101
 #define MEDIATEK_PRODUCT_7208_2COM              0x7102
+#define MEDIATEK_PRODUCT_7103_2COM              0x7103
+#define MEDIATEK_PRODUCT_7106_2COM              0x7106
 #define MEDIATEK_PRODUCT_FP_1COM                0x0003
 #define MEDIATEK_PRODUCT_FP_2COM                0x0023
 #define MEDIATEK_PRODUCT_FPDC_1COM              0x0043
@@ -441,6 +445,14 @@ static void option_instat_callback(struct urb *urb);
 #define CELLIENT_VENDOR_ID                      0x2692
 #define CELLIENT_PRODUCT_MEN200                 0x9005
 
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID                       0x1ff4
+#define PETATEL_PRODUCT_NP10T                   0x600e
+
+/* TP-LINK Incorporated products */
+#define TPLINK_VENDOR_ID                        0x2357
+#define TPLINK_PRODUCT_MA180                    0x0201
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
                 OPTION_BLACKLIST_NONE = 0,
@@ -922,8 +934,10 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
           .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
           .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1190,6 +1204,8 @@ static const struct usb_device_id option_ids[] = {
           .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
         },
         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
         { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
         { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
@@ -1294,7 +1310,14 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
         { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+        { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
         { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+        { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+        { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
+          .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);