Merge 3.7-rc6 into usb-next.

This resolves a conflict with these files:
	drivers/usb/early/ehci-dbgp.c
	drivers/usb/host/ehci-ls1x.c
	drivers/usb/host/ohci-xls.c
	drivers/usb/musb/ux500.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 59 insertions, 13 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index eaa14514e173..4225d5e72131 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2166,8 +2166,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
         struct usb_hcd          *hcd = __hcd;
+        unsigned long           flags;
         irqreturn_t             rc;
 
+        /* IRQF_DISABLED doesn't work correctly with shared IRQs
+         * when the first handler doesn't use it.  So let's just
+         * assume it's never used.
+         */
+        local_irq_save(flags);
+
         if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
                 rc = IRQ_NONE;
         else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2175,6 +2182,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
         else
                 rc = IRQ_HANDLED;
 
+        local_irq_restore(flags);
         return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2362,6 +2370,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
         int retval;
 
         if (hcd->driver->irq) {
+
+                /* IRQF_DISABLED doesn't work as advertised when used together
+                 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+                 * interrupts we can remove it here.
+                 */
+                if (irqflags & IRQF_SHARED)
+                        irqflags &= ~IRQF_DISABLED;
+
                 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
                                 hcd->driver->description, hcd->self.busnum);
                 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 28b9790e84ea..4f23b12a3ae7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                 fifo_count = musb_readw(epio, MUSB_RXCOUNT);
 
                 /*
-                 *  use mode 1 only if we expect data of at least ep packet_sz
-                 *  and have not yet received a short packet
+                 * Enable Mode 1 on RX transfers only when short_not_ok flag
+                 * is set. Currently short_not_ok flag is set only from
+                 * file_storage and f_mass_storage drivers
                  */
-                if ((request->length - request->actual >= musb_ep->packet_sz) &&
-                        (fifo_count >= musb_ep->packet_sz))
+
+                if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
                         use_mode_1 = 1;
                 else
                         use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                                 c = musb->dma_controller;
                                 channel = musb_ep->dma;
 
+        /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+         * mode 0 only. So we do not get endpoint interrupts due to DMA
+         * completion. We only get interrupts from DMA controller.
+         *
+         * We could operate in DMA mode 1 if we knew the size of the tranfer
+         * in advance. For mass storage class, request->length = what the host
+         * sends, so that'd work.  But for pretty much everything else,
+         * request->length is routinely more than what the host sends. For
+         * most these gadgets, end of is signified either by a short packet,
+         * or filling the last byte of the buffer.  (Sending extra data in
+         * that last pckate should trigger an overflow fault.)  But in mode 1,
+         * we don't get DMA completion interrupt for short packets.
+         *
+         * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+         * to get endpoint interrupt on every DMA req, but that didn't seem
+         * to work reliably.
+         *
+         * REVISIT an updated g_file_storage can set req->short_not_ok, which
+         * then becomes usable as a runtime "use mode 1" hint...
+         */
+
                                 /* Experimental: Mode1 works with mass storage use cases */
                                 if (use_mode_1) {
                                         csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index d8c8a42bff3e..6223062d5d1b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT
 
 config TWL4030_USB
         tristate "TWL4030 USB Transceiver Driver"
-        depends on TWL4030_CORE && REGULATOR_TWL4030
+        depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
         select USB_OTG_UTILS
         help
           Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@ config TWL4030_USB
 
 config TWL6030_USB
         tristate "TWL6030 USB Transceiver Driver"
-        depends on TWL4030_CORE && OMAP_USB2
+        depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
         select USB_OTG_UTILS
         help
           Enable this to support the USB OTG transceiver on TWL6030
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 991ca6a690a0..97bc49f68efd 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2426,7 +2426,7 @@ static void keyspan_release(struct usb_serial *serial)
 static int keyspan_port_probe(struct usb_serial_port *port)
 {
         struct usb_serial *serial = port->serial;
-        struct keyspan_port_private *s_priv;
+        struct keyspan_serial_private *s_priv;
         struct keyspan_port_private *p_priv;
         const struct keyspan_device_details *d_details;
         struct callbacks *cback;
@@ -2441,7 +2441,6 @@ static int keyspan_port_probe(struct usb_serial_port *port)
         if (!p_priv)
                 return -ENOMEM;
 
-        s_priv = usb_get_serial_data(port->serial);
         p_priv->device_details = d_details;
 
         /* Setup values for the various callback routines */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5839f4d662dc..ed660564f0c5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -157,6 +157,7 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_E362            0x9010
 #define NOVATELWIRELESS_PRODUCT_G1              0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M            0xA002
 #define NOVATELWIRELESS_PRODUCT_G2              0xA010
@@ -192,6 +193,9 @@ static void option_instat_callback(struct urb *urb);
 #define DELL_PRODUCT_5730_MINICARD_TELUS        0x8181
 #define DELL_PRODUCT_5730_MINICARD_VZW          0x8182
 
+#define DELL_PRODUCT_5800_MINICARD_VZW          0x8195  /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW       0x8196  /* Novatel E362 */
+
 #define KYOCERA_VENDOR_ID                       0x0c88
 #define KYOCERA_PRODUCT_KPC650                  0x17da
 #define KYOCERA_PRODUCT_KPC680                  0x180a
@@ -282,6 +286,7 @@ static void option_instat_callback(struct urb *urb);
 /* ALCATEL PRODUCTS */
 #define ALCATEL_VENDOR_ID                       0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200              0x0000
+#define ALCATEL_PRODUCT_X220_X500D              0x0017
 
 #define PIRELLI_VENDOR_ID                       0x1266
 #define PIRELLI_PRODUCT_C100_1                  0x1002
@@ -705,6 +710,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
         /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
         { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
 
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -727,6 +733,8 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },      /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },       /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) },         /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+        { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },   /* ADU-E100, ADU-310 */
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1156,6 +1164,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
           .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
         },
+        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
         { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
         { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
         { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 2be2b5b639ae..01c94aada56c 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -454,9 +454,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
         struct usb_serial *serial = port->serial;
         struct urb *urb;
 
-        if (endpoint == -1)
-                return NULL;    /* endpoint not needed */
-
         urb = usb_alloc_urb(0, GFP_KERNEL);     /* No ISO */
         if (urb == NULL) {
                 dev_dbg(&serial->interface->dev,
@@ -488,6 +485,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
         init_usb_anchor(&portdata->delayed);
 
         for (i = 0; i < N_IN_URB; i++) {
+                if (!port->bulk_in_size)
+                        break;
+
                 buffer = (u8 *)__get_free_page(GFP_KERNEL);
                 if (!buffer)
                         goto bail_out_error;
@@ -501,8 +501,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
         }
 
         for (i = 0; i < N_OUT_URB; i++) {
-                if (port->bulk_out_endpointAddress == -1)
-                        continue;
+                if (!port->bulk_out_size)
+                        break;
 
                 buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
                 if (!buffer)