Merge tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/dt

From Jason Cooper:
orion dt for v3.8

 - ehci-orion dt binding
 - gpio-poweroff
 - use dt regulators
 - move mpp to DT/pinctrl

Depends on:

 - orion/boards

    - merge conflicts
       - keep all 'select's in Kconfig
       - remove all #includes in board-*.c

 - pinctrl/devel up to:

    - 06763c7 pinctrl: mvebu: move to its own directory

* tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux: (211 commits)
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ARM: Kirkwood: Convert dnskw to pinctrl
  ARM: Kirkwood: Convert iConnect to pinctrl.
  ARM: Kirkwood: Convert TS219 to pinctrl.
  ARM: Kirkwood: Add DTSI files for pinctrl
  ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

11 files changed, 106 insertions, 25 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1e741bca0265..f034716190ff 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2151,8 +2151,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
         struct usb_hcd          *hcd = __hcd;
+        unsigned long           flags;
         irqreturn_t             rc;
 
+        /* IRQF_DISABLED doesn't work correctly with shared IRQs
+         * when the first handler doesn't use it.  So let's just
+         * assume it's never used.
+         */
+        local_irq_save(flags);
+
         if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
                 rc = IRQ_NONE;
         else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2160,6 +2167,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
         else
                 rc = IRQ_HANDLED;
 
+        local_irq_restore(flags);
         return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
         int retval;
 
         if (hcd->driver->irq) {
+
+                /* IRQF_DISABLED doesn't work as advertised when used together
+                 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+                 * interrupts we can remove it here.
+                 */
+                if (irqflags & IRQF_SHARED)
+                        irqflags &= ~IRQF_DISABLED;
+
                 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
                                 hcd->driver->description, hcd->self.busnum);
                 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index e426ad626d74..4bfa78af379c 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -20,6 +20,7 @@
 #include <linux/usb/ehci_def.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/kconfig.h>
 #include <linux/kgdb.h>
 #include <linux/kthread.h>
 #include <asm/io.h>
@@ -614,12 +615,6 @@ err:
         return -ENODEV;
 }
 
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
-        return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
 static int ehci_reset_port(int port)
 {
         u32 portsc;
@@ -979,6 +974,7 @@ struct console early_dbgp_console = {
         .index =        -1,
 };
 
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
 int dbgp_reset_prep(struct usb_hcd *hcd)
 {
         int ret = xen_dbgp_reset_prep(hcd);
@@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(dbgp_reset_prep);
 
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+        return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
 #ifdef CONFIG_KGDB
 
 static char kgdbdbgp_buf[DBGP_MAX_PACKET];
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
index ca759652626b..aa0f328922df 100644
--- a/drivers/usb/host/ehci-ls1x.c
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
                 goto err_put_hcd;
         }
 
-        ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+        ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
         if (ret)
                 goto err_put_hcd;
 
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9c2717d66730..e7e8275028d3 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -14,6 +14,9 @@
 #include <linux/mbus.h>
 #include <linux/clk.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
 
 #define rdl(off)        __raw_readl(hcd->regs + (off))
 #define wrl(off, val)   __raw_writel((val), hcd->regs + (off))
@@ -181,6 +184,8 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
         }
 }
 
+static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
+
 static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 {
         struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -191,13 +196,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
         struct clk *clk;
         void __iomem *regs;
         int irq, err;
+        enum orion_ehci_phy_ver phy_version;
 
         if (usb_disabled())
                 return -ENODEV;
 
         pr_debug("Initializing Orion-SoC USB Host Controller\n");
 
-        irq = platform_get_irq(pdev, 0);
+        if (pdev->dev.of_node)
+                irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+        else
+                irq = platform_get_irq(pdev, 0);
         if (irq <= 0) {
                 dev_err(&pdev->dev,
                         "Found HC with no IRQ. Check %s setup!\n",
@@ -215,6 +224,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
                 goto err1;
         }
 
+        /*
+         * Right now device-tree probed devices don't get dma_mask
+         * set. Since shared usb code relies on it, set it here for
+         * now. Once we have dma capability bindings this can go away.
+         */
+        if (!pdev->dev.dma_mask)
+                pdev->dev.dma_mask = &ehci_orion_dma_mask;
+
         if (!request_mem_region(res->start, resource_size(res),
                                 ehci_orion_hc_driver.description)) {
                 dev_dbg(&pdev->dev, "controller already in use\n");
@@ -262,7 +279,12 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
         /*
          * setup Orion USB controller.
          */
-        switch (pd->phy_version) {
+        if (pdev->dev.of_node)
+                phy_version = EHCI_PHY_NA;
+        else
+                phy_version = pd->phy_version;
+
+        switch (phy_version) {
         case EHCI_PHY_NA:       /* dont change USB phy settings */
                 break;
         case EHCI_PHY_ORION:
@@ -317,9 +339,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
 
 MODULE_ALIAS("platform:orion-ehci");
 
+static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = {
+        { .compatible = "marvell,orion-ehci", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
 static struct platform_driver ehci_orion_driver = {
         .probe          = ehci_orion_drv_probe,
         .remove         = __exit_p(ehci_orion_drv_remove),
         .shutdown       = usb_hcd_platform_shutdown,
-        .driver.name    = "orion-ehci",
+        .driver = {
+                .name   = "orion-ehci",
+                .owner  = THIS_MODULE,
+                .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+        },
 };
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index 84201cd1a472..41e378f17c66 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver,
                 goto err3;
         }
 
-        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+        retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
         if (retval != 0)
                 goto err4;
         return retval;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d0b87e7b4abf..b6b84dacc791 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                 fifo_count = musb_readw(epio, MUSB_RXCOUNT);
 
                 /*
-                 *  use mode 1 only if we expect data of at least ep packet_sz
-                 *  and have not yet received a short packet
+                 * Enable Mode 1 on RX transfers only when short_not_ok flag
+                 * is set. Currently short_not_ok flag is set only from
+                 * file_storage and f_mass_storage drivers
                  */
-                if ((request->length - request->actual >= musb_ep->packet_sz) &&
-                        (fifo_count >= musb_ep->packet_sz))
+
+                if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
                         use_mode_1 = 1;
                 else
                         use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                                 c = musb->dma_controller;
                                 channel = musb_ep->dma;
 
+        /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+         * mode 0 only. So we do not get endpoint interrupts due to DMA
+         * completion. We only get interrupts from DMA controller.
+         *
+         * We could operate in DMA mode 1 if we knew the size of the tranfer
+         * in advance. For mass storage class, request->length = what the host
+         * sends, so that'd work.  But for pretty much everything else,
+         * request->length is routinely more than what the host sends. For
+         * most these gadgets, end of is signified either by a short packet,
+         * or filling the last byte of the buffer.  (Sending extra data in
+         * that last pckate should trigger an overflow fault.)  But in mode 1,
+         * we don't get DMA completion interrupt for short packets.
+         *
+         * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+         * to get endpoint interrupt on every DMA req, but that didn't seem
+         * to work reliably.
+         *
+         * REVISIT an updated g_file_storage can set req->short_not_ok, which
+         * then becomes usable as a runtime "use mode 1" hint...
+         */
+
                                 /* Experimental: Mode1 works with mass storage use cases */
                                 if (use_mode_1) {
                                         csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d62a91fedc22..0e62f504410e 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev)
         struct platform_device          *musb;
         struct ux500_glue               *glue;
         struct clk                      *clk;
-
+        int                             musbid;
         int                             ret = -ENOMEM;
 
         glue = kzalloc(sizeof(*glue), GFP_KERNEL);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index d8c8a42bff3e..6223062d5d1b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT
 
 config TWL4030_USB
         tristate "TWL4030 USB Transceiver Driver"
-        depends on TWL4030_CORE && REGULATOR_TWL4030
+        depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
         select USB_OTG_UTILS
         help
           Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@ config TWL4030_USB
 
 config TWL6030_USB
         tristate "TWL6030 USB Transceiver Driver"
-        depends on TWL4030_CORE && OMAP_USB2
+        depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
         select USB_OTG_UTILS
         help
           Enable this to support the USB OTG transceiver on TWL6030
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 7179b0c5f814..cff8dd5b462d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial)
 static int keyspan_port_probe(struct usb_serial_port *port)
 {
         struct usb_serial *serial = port->serial;
-        struct keyspan_port_private *s_priv;
+        struct keyspan_serial_private *s_priv;
         struct keyspan_port_private *p_priv;
         const struct keyspan_device_details *d_details;
         struct callbacks *cback;
@@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port)
         if (!p_priv)
                 return -ENOMEM;
 
-        s_priv = usb_get_serial_data(port->serial);
         p_priv->device_details = d_details;
 
         /* Setup values for the various callback routines */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dee7d61241e..edc64bb6f457 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_E362            0x9010
 #define NOVATELWIRELESS_PRODUCT_G1              0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M            0xA002
 #define NOVATELWIRELESS_PRODUCT_G2              0xA010
@@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb);
 #define DELL_PRODUCT_5730_MINICARD_TELUS        0x8181
 #define DELL_PRODUCT_5730_MINICARD_VZW          0x8182
 
+#define DELL_PRODUCT_5800_MINICARD_VZW          0x8195  /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW       0x8196  /* Novatel E362 */
+
 #define KYOCERA_VENDOR_ID                       0x0c88
 #define KYOCERA_PRODUCT_KPC650                  0x17da
 #define KYOCERA_PRODUCT_KPC680                  0x180a
@@ -283,6 +287,7 @@ static void option_instat_callback(struct urb *urb);
 /* ALCATEL PRODUCTS */
 #define ALCATEL_VENDOR_ID                       0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200              0x0000
+#define ALCATEL_PRODUCT_X220_X500D              0x0017
 
 #define PIRELLI_VENDOR_ID                       0x1266
 #define PIRELLI_PRODUCT_C100_1                  0x1002
@@ -706,6 +711,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
         /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
         { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
 
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
         { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -728,6 +734,8 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },      /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },       /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
         { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) },         /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+        { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },   /* ADU-E100, ADU-310 */
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1157,6 +1165,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
           .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
         },
+        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
         { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
         { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
         { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 61a73ad1a187..a3e9c095f0d8 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
         struct usb_serial *serial = port->serial;
         struct urb *urb;
 
-        if (endpoint == -1)
-                return NULL;    /* endpoint not needed */
-
         urb = usb_alloc_urb(0, GFP_KERNEL);     /* No ISO */
         if (urb == NULL) {
                 dev_dbg(&serial->interface->dev,
@@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
         init_usb_anchor(&portdata->delayed);
 
         for (i = 0; i < N_IN_URB; i++) {
+                if (!port->bulk_in_size)
+                        break;
+
                 buffer = (u8 *)__get_free_page(GFP_KERNEL);
                 if (!buffer)
                         goto bail_out_error;
@@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
         }
 
         for (i = 0; i < N_OUT_URB; i++) {
-                if (port->bulk_out_endpointAddress == -1)
-                        continue;
+                if (!port->bulk_out_size)
+                        break;
 
                 buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
                 if (!buffer)