Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

31 files changed, 150 insertions, 197 deletions

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 34e6108e1d42..0fe434505ac4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -3,7 +3,7 @@
  *
  * This driver supports USB CDC WCM Device Management.
  *
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
  *
  * Some code taken from cdc-acm.c
  *
@@ -610,7 +610,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
         if (!buffer)
                 goto out;
 
-        while (buflen > 0) {
+        while (buflen > 2) {
                 if (buffer [1] != USB_DT_CS_INTERFACE) {
                         dev_err(&intf->dev, "skipping garbage\n");
                         goto next_desc;
@@ -646,16 +646,18 @@ next_desc:
         spin_lock_init(&desc->iuspin);
         init_waitqueue_head(&desc->wait);
         desc->wMaxCommand = maxcom;
+        /* this will be expanded and needed in hardware endianness */
         desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
         desc->intf = intf;
         INIT_WORK(&desc->rxwork, wdm_rxwork);
 
-        iface = &intf->altsetting[0];
+        rv = -EINVAL;
+        iface = intf->cur_altsetting;
+        if (iface->desc.bNumEndpoints != 1)
+                goto err;
         ep = &iface->endpoint[0].desc;
-        if (!ep || !usb_endpoint_is_int_in(ep)) {
-                rv = -EINVAL;
+        if (!ep || !usb_endpoint_is_int_in(ep))
                 goto err;
-        }
 
         desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
         desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
@@ -711,12 +713,19 @@ next_desc:
 
         usb_set_intfdata(intf, desc);
         rv = usb_register_dev(intf, &wdm_class);
-        dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
-                 intf->minor - WDM_MINOR_BASE);
         if (rv < 0)
-                goto err;
+                goto err3;
+        else
+                dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+                        intf->minor - WDM_MINOR_BASE);
 out:
         return rv;
+err3:
+        usb_set_intfdata(intf, NULL);
+        usb_buffer_free(interface_to_usbdev(desc->intf),
+                        desc->bMaxPacketSize0,
+                        desc->inbuf,
+                        desc->response->transfer_dma);
 err2:
         usb_buffer_free(interface_to_usbdev(desc->intf),
                         desc->wMaxPacketSize,
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index cadb2dc1d28a..3ba2fff71490 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -119,7 +119,7 @@ void *hcd_buffer_alloc(
                 if (size <= pool_max [i])
                         return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
         }
-        return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+        return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
 }
 
 void hcd_buffer_free(
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 22c65960c429..38e531ecae4d 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -51,6 +51,7 @@
  * - Gadget API (majority of optional features)
  * - Suspend & Remote Wakeup
  */
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
@@ -142,7 +143,7 @@ static struct {
 #define CAP_DEVICEADDR      (0x014UL)
 #define CAP_ENDPTLISTADDR   (0x018UL)
 #define CAP_PORTSC          (0x044UL)
-#define CAP_DEVLC           (0x0B4UL)
+#define CAP_DEVLC           (0x084UL)
 #define CAP_USBMODE         (hw_bank.lpm ? 0x0C8UL : 0x068UL)
 #define CAP_ENDPTSETUPSTAT  (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
 #define CAP_ENDPTPRIME      (hw_bank.lpm ? 0x0DCUL : 0x070UL)
@@ -1986,6 +1987,8 @@ static int ep_enable(struct usb_ep *ep,
         do {
                 dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
+                mEp->qh[mEp->dir].ptr->cap = 0;
+
                 if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
                         mEp->qh[mEp->dir].ptr->cap |=  QH_IOS;
                 else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 5c030b080d4c..381a53b3e11c 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -738,7 +738,6 @@ static struct fsg_dev			*the_fsg;
 static struct usb_gadget_driver         fsg_driver;
 
 static void     close_backing_file(struct lun *curlun);
-static void     close_all_backing_files(struct fsg_dev *fsg);
 
 
 /*-------------------------------------------------------------------------*/
@@ -3593,12 +3592,10 @@ static int fsg_main_thread(void *fsg_)
         fsg->thread_task = NULL;
         spin_unlock_irq(&fsg->lock);
 
-        /* In case we are exiting because of a signal, unregister the
-         * gadget driver and close the backing file. */
-        if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+        /* If we are exiting because of a signal, unregister the
+         * gadget driver. */
+        if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
                 usb_gadget_unregister_driver(&fsg_driver);
-                close_all_backing_files(fsg);
-        }
 
         /* Let the unbind and cleanup routines know the thread has exited */
         complete_and_exit(&fsg->thread_notifier, 0);
@@ -3703,14 +3700,6 @@ static void close_backing_file(struct lun *curlun)
         }
 }
 
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
-        int     i;
-
-        for (i = 0; i < fsg->nluns; ++i)
-                close_backing_file(&fsg->luns[i]);
-}
-
 
 static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -3845,6 +3834,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
                 if (curlun->registered) {
                         device_remove_file(&curlun->dev, &dev_attr_ro);
                         device_remove_file(&curlun->dev, &dev_attr_file);
+                        close_backing_file(curlun);
                         device_unregister(&curlun->dev);
                         curlun->registered = 0;
                 }
@@ -4190,7 +4180,6 @@ autoconf_fail:
 out:
         fsg->state = FSG_STATE_TERMINATED;      // The thread is dead
         fsg_unbind(gadget);
-        close_all_backing_files(fsg);
         complete(&fsg->thread_notifier);
         return rc;
 }
@@ -4284,7 +4273,6 @@ static void __exit fsg_cleanup(void)
         /* Wait for the thread to finish up */
         wait_for_completion(&fsg->thread_notifier);
 
-        close_all_backing_files(fsg);
         kref_put(&fsg->ref, fsg_release);
 }
 module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 57d9641c6bf8..a2db0e174f2c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -3104,7 +3104,6 @@ static int omap_udc_resume(struct platform_device *dev)
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-        .probe          = omap_udc_probe,
         .remove         = __exit_p(omap_udc_remove),
         .suspend        = omap_udc_suspend,
         .resume         = omap_udc_resume,
@@ -3122,7 +3121,7 @@ static int __init udc_init(void)
 #endif
                 "%s\n", driver_desc,
                 use_dma ?  " (dma)" : "");
-        return platform_driver_register(&udc_driver);
+        return platform_driver_probe(&udc_driver, omap_udc_probe);
 }
 module_init(udc_init);
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index ada5d2ba297b..556d0ec0c1f8 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -323,7 +323,7 @@ static int tt_available (
                  * already scheduled transactions
                  */
                 if (125 < usecs) {
-                        int ufs = (usecs / 125) - 1;
+                        int ufs = (usecs / 125);
                         int i;
                         for (i = uframe; i < (uframe + ufs) && i < 8; i++)
                                 if (0 < tt_usecs[i]) {
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0112353ec97d..4000cf6d1e81 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2191,7 +2191,7 @@ static int musb_resume_early(struct platform_device *pdev)
 
 #else
 #define musb_suspend    NULL
-#define musb_resume     NULL
+#define musb_resume_early       NULL
 #endif
 
 static struct platform_driver musb_driver = {
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 901dffdf23b1..60924ce08493 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -3,7 +3,6 @@
  * Some code has been taken from tusb6010.c
  * Copyrights for that are attributable to:
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 9e20fd070d71..4ac1477d3569 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -2,7 +2,6 @@
  * TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index ab8c96286ce6..35c933a5d991 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -2,7 +2,6 @@
  * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index ff318fae7d4d..0a43a7db750f 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -43,7 +43,8 @@ EXPORT_SYMBOL(otg_get_transceiver);
  */
 void otg_put_transceiver(struct otg_transceiver *x)
 {
-        put_device(x->dev);
+        if (x)
+                put_device(x->dev);
 }
 EXPORT_SYMBOL(otg_put_transceiver);
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 858bdd038fbc..dd501bb63ed6 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -175,13 +175,6 @@ static int  cyberjack_open(struct tty_struct *tty,
         dbg("%s - usb_clear_halt", __func__);
         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
-        /* force low_latency on so that our tty_push actually forces
-         * the data through, otherwise it is scheduled, and with high
-         * data rates (like with OHCI) data can get lost.
-         */
-        if (tty)
-                tty->low_latency = 1;
-
         priv = usb_get_serial_port_data(port);
         spin_lock_irqsave(&priv->lock, flags);
         priv->rdtodo = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index eae4740d448c..e568710b263f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty,
         priv->rx_flags = 0;
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        /* setting to zero could cause data loss */
-        if (tty)
-                tty->low_latency = 1;
-
         /* raise both lines and set termios */
         spin_lock_irqsave(&priv->lock, flags);
         priv->line_control = CONTROL_DTR | CONTROL_RTS;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8a69cce40b6d..c709ec474a80 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty,
         termios->c_cflag
                 |= CS8;         /* character size 8 bits */
 
-        /*
-         * Force low_latency on; otherwise the pushes are scheduled;
-         * this is bad as it opens up the possibility of dropping bytes
-         * on the floor.  We don't want to drop bytes on the floor. :)
-         */
-        tty->low_latency = 1;
         tty_encode_baud_rate(tty, 115200, 115200);
 }
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a26a0e2cdb4a..586d30ff450b 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty,
 
         dbg("%s - port %d", __func__, port->number);
 
-        /*
-         * Force low_latency on so that our tty_push actually forces the data
-         * through, otherwise it is scheduled, and with high data rates (like
-         * with OHCI) data can get lost.
-         */
-        if (tty)
-                tty->low_latency = 1;
-
         spin_lock_irqsave(&garmin_data_p->lock, flags);
         garmin_data_p->mode  = initial_mode;
         garmin_data_p->count = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9d57cace3731..4cec9906ccf3 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty,
 
         dbg("%s - port %d", __func__, port->number);
 
-        /* force low_latency on so that our tty_push actually forces the data
-           through, otherwise it is scheduled, and with high data rates (like
-           with OHCI) data can get lost. */
-        if (tty)
-                tty->low_latency = 1;
-
         /* clear the throttle flags */
         spin_lock_irqsave(&port->lock, flags);
         port->throttled = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0d1ad9..fb4a73d090f6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = {
 /* local variables */
 static int debug;
 
-static int low_latency = 1;     /* tty low latency flag, on by default */
-
 static atomic_t CmdUrbs;        /* Number of outstanding Command Write Urbs */
 
 
@@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty,
         if (edge_port == NULL)
                 return -ENODEV;
 
-        if (tty)
-                tty->low_latency = low_latency;
-
         /* see if we've set up our endpoint info yet (can't set it up
            in edge_startup as the structures were not set up at that time.) */
         serial = port->serial;
@@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00ddc41..513b25e044c1 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc {
 #define EDGE_READ_URB_STOPPING  1
 #define EDGE_READ_URB_STOPPED   2
 
-#define EDGE_LOW_LATENCY        1
 #define EDGE_CLOSING_WAIT       4000    /* in .01 sec */
 
 #define EDGE_OUT_BUF_SIZE       1024
@@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber;
 
 static int debug;
 
-static int low_latency = EDGE_LOW_LATENCY;
 static int closing_wait = EDGE_CLOSING_WAIT;
 static int ignore_cpu_rev;
 static int default_uart_mode;           /* RS232 */
@@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty,
         if (edge_port == NULL)
                 return -ENODEV;
 
-        if (tty)
-                tty->low_latency = low_latency;
-
         port_number = port->number - port->serial->minor;
         switch (port_number) {
         case 0:
@@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ef92095b0732..cd62825a9ac3 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty,
                 priv->free_len += PACKET_SIZE;
         }
 
-        /*
-         * Force low latency on. This will immediately push data to the line
-         * discipline instead of queueing.
-         */
-
         if (tty) {
-                tty->low_latency = 1;
                 /* FIXME: These two are bogus */
                 tty->raw = 1;
                 tty->real_raw = 1;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index f530032ed93d..da2a2b46644a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty,
         if (!buf_flow_init)
                 return -ENOMEM;
 
-        if (tty)
-                tty->low_latency = 1;
-
         /* --1: Tell the modem to initialize (we think) From sniffs this is
          *      always the first thing that gets sent to the modem during
          *      opening of the device */
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 2314c6ae4fc2..4473d442b2aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty,
                 tty->termios->c_oflag = 0;
                 tty->termios->c_iflag = 0;
                 priv->termios_initialized = 1;
-                tty->low_latency = 1;
                 priv->poll = 0;
          }
         spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6286baad9392..c148544953b3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty,
         /* someone sets the dev to 0 if the close method has been called */
         port->interrupt_in_urb->dev = port->serial->dev;
 
-
-        /* force low_latency on so that our tty_push actually forces
-         * the data through, otherwise it is scheduled, and with high
-         * data rates (like with OHCI) data can get lost.
-         */
         if (tty) {
-                tty->low_latency = 1;
 
                 /* Default to echo off and other sane device settings */
                 tty->termios->c_lflag = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e772cc0a97fd..24e3b5d4b4d4 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty,
         data = 0x0c;
         send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-        /* force low_latency on so that our tty_push actually forces *
-         * the data through,otherwise it is scheduled, and with      *
-         * high data rates (like with OHCI) data can get lost.       */
-
-        if (tty)
-                tty->low_latency = 1;
-
         /* see if we've set up our endpoint info yet   *
          * (can't set it up in mos7720_startup as the  *
          * structures were not set up at that time.)   */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c20e88a91b3..84fb1dcd30dc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -38,7 +38,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
 
 /*
@@ -123,6 +123,11 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ *  - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL          0x0557
+#define ATENINTL_DEVICE_ID_UC2324       0x2011
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = {
         {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+        {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
         {}                      /* terminating entry */
 };
 
@@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
         {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+        {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
         {}                      /* terminating entry */
 };
 
@@ -1000,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty,
         status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
                                                                         Data);
 
-        /* force low_latency on so that our tty_push actually forces *
-         * the data through,otherwise it is scheduled, and with      *
-         * high data rates (like with OHCI) data can get lost.       */
-        if (tty)
-                tty->low_latency = 1;
-
         /* Check to see if we've set up our endpoint info yet    *
          * (can't set it up in mos7840_startup as the structures *
          * were not set up at that time.)                        */
@@ -2477,9 +2478,14 @@ static int mos7840_startup(struct usb_serial *serial)
                 mos7840_set_port_private(serial->port[i], mos7840_port);
                 spin_lock_init(&mos7840_port->pool_lock);
 
-                mos7840_port->port_num = ((serial->port[i]->number -
-                                           (serial->port[i]->serial->minor)) +
-                                          1);
+                /* minor is not initialised until later by
+                 * usb-serial.c:get_free_serial() and cannot therefore be used
+                 * to index device instances */
+                mos7840_port->port_num = i + 1;
+                dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+                dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+                dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+                dbg ("serial->minor = %d", serial->minor);
 
                 if (mos7840_port->port_num == 1) {
                         mos7840_port->SpRegOffset = 0x0;
@@ -2690,13 +2696,16 @@ static void mos7840_shutdown(struct usb_serial *serial)
 
         for (i = 0; i < serial->num_ports; ++i) {
                 mos7840_port = mos7840_get_port_private(serial->port[i]);
-                spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-                mos7840_port->zombie = 1;
-                spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-                usb_kill_urb(mos7840_port->control_urb);
-                kfree(mos7840_port->ctrl_buf);
-                kfree(mos7840_port->dr);
-                kfree(mos7840_port);
+                dbg ("mos7840_port %d = %p", i, mos7840_port);
+                if (mos7840_port) {
+                        spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+                        mos7840_port->zombie = 1;
+                        spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+                        usb_kill_urb(mos7840_port->control_urb);
+                        kfree(mos7840_port->ctrl_buf);
+                        kfree(mos7840_port->dr);
+                        kfree(mos7840_port);
+                }
                 mos7840_set_port_private(serial->port[i], NULL);
         }
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 839583dc8b6a..b500ad10b758 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
         priv->port = port;
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        /*
-         * Force low_latency on so that our tty_push actually forces the data
-         * through, otherwise it is scheduled, and with high data rates (like
-         * with OHCI) data can get lost.
-         */
-        if (tty)
-                tty->low_latency = 1;
-
         /* Start reading from the device */
         usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
                           usb_rcvbulkpipe(priv->udev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 47bd070f24b7..7817b82889ca 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -936,9 +936,6 @@ static int option_open(struct tty_struct *tty,
                                 usb_pipeout(urb->pipe), 0); */
         }
 
-        if (tty)
-                tty->low_latency = 1;
-
         option_send_setup(tty, port);
 
         return 0;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d9bf9a5c20ec..913225c61610 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty,
                         val |= 0x02;
 
                 /* If composite device then properly report interface */
-                if (serial->num_ports == 1)
+                if (serial->num_ports == 1) {
                         interface = sierra_calc_interface(serial);
 
+                        /* Control message is sent only to interfaces with
+                         * interrupt_in endpoints
+                         */
+                        if (port->interrupt_in_urb) {
+                                /* send control message */
+                                return usb_control_msg(serial->dev,
+                                        usb_rcvctrlpipe(serial->dev, 0),
+                                        0x22, 0x21, val, interface,
+                                        NULL, 0, USB_CTRL_SET_TIMEOUT);
+                        }
+                }
+
                 /* Otherwise the need to do non-composite mapping */
                 else {
                         if (port->bulk_out_endpointAddress == 2)
@@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty,
                                 interface = 1;
                         else if (port->bulk_out_endpointAddress == 5)
                                 interface = 2;
-                }
 
-                return usb_control_msg(serial->dev,
+                        return usb_control_msg(serial->dev,
                                 usb_rcvctrlpipe(serial->dev, 0),
                                 0x22, 0x21, val, interface,
                                 NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+                }
         }
 
         return 0;
@@ -585,9 +598,6 @@ static int sierra_open(struct tty_struct *tty,
                 }
         }
 
-        if (tty)
-                tty->low_latency = 1;
-
         sierra_send_setup(tty, port);
 
         /* start up the interrupt endpoint if we have one */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9c4c700c7cc6..0a64bac306ee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -50,11 +50,10 @@
 
 #define TI_TRANSFER_TIMEOUT     2
 
-#define TI_DEFAULT_LOW_LATENCY  0
 #define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
 
 /* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS     (ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS     0
 
 /* read urb states */
 #define TI_READ_URB_RUNNING     0
@@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
 
 /* module parameters */
 static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 static unsigned int vendor_3410_count;
@@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
-                "TTY low_latency flag, 0=off, 1=on, default is off");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait,
     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
@@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial)
                 spin_lock_init(&tport->tp_lock);
                 tport->tp_uart_base_addr = (i == 0 ?
                                 TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-                tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
                 tport->tp_closing_wait = closing_wait;
                 init_waitqueue_head(&tport->tp_msr_wait);
                 init_waitqueue_head(&tport->tp_write_wait);
@@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty,
         if (mutex_lock_interruptible(&tdev->td_open_close_lock))
                 return -ERESTARTSYS;
 
-        if (tty)
-                tty->low_latency =
-                                (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
         port_number = port->number - port->serial->minor;
 
         memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
@@ -1454,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
                 return -EFAULT;
 
         tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-        tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
         tport->tp_closing_wait = new_serial.closing_wait;
 
         return 0;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2a70563bbee1..0a566eea49c0 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref)
 
         dbg("%s - %s", __func__, serial->type->description);
 
-        serial->type->shutdown(serial);
-
         /* return the minor range that this device had */
         if (serial->minor != SERIAL_TTY_NO_MINOR)
                 return_serial(serial);
 
-        for (i = 0; i < serial->num_ports; ++i)
-                serial->port[i]->port.count = 0;
-
-        /* the ports are cleaned up and released in port_release() */
-        for (i = 0; i < serial->num_ports; ++i)
-                if (serial->port[i]->dev.parent != NULL) {
-                        device_unregister(&serial->port[i]->dev);
-                        serial->port[i] = NULL;
-                }
-
         /* If this is a "fake" port, we have to clean it up here, as it will
          * not get cleaned up in port_release() as it was never registered with
          * the driver core */
@@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
         struct usb_serial *serial;
         struct usb_serial_port *port;
         unsigned int portNumber;
-        int retval;
+        int retval = 0;
 
         dbg("%s", __func__);
 
@@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
                 return -ENODEV;
         }
 
+        mutex_lock(&serial->disc_mutex);
         portNumber = tty->index - serial->minor;
         port = serial->port[portNumber];
-        if (!port) {
-                retval = -ENODEV;
-                goto bailout_kref_put;
-        }
-
-        if (port->serial->disconnected) {
+        if (!port || serial->disconnected)
                 retval = -ENODEV;
-                goto bailout_kref_put;
-        }
+        else
+                get_device(&port->dev);
+        /*
+         * Note: Our locking order requirement does not allow port->mutex
+         * to be acquired while serial->disc_mutex is held.
+         */
+        mutex_unlock(&serial->disc_mutex);
+        if (retval)
+                goto bailout_serial_put;
 
         if (mutex_lock_interruptible(&port->mutex)) {
                 retval = -ERESTARTSYS;
-                goto bailout_kref_put;
+                goto bailout_port_put;
         }
 
         ++port->port.count;
@@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
                         goto bailout_mutex_unlock;
                 }
 
-                retval = usb_autopm_get_interface(serial->interface);
+                mutex_lock(&serial->disc_mutex);
+                if (serial->disconnected)
+                        retval = -ENODEV;
+                else
+                        retval = usb_autopm_get_interface(serial->interface);
                 if (retval)
                         goto bailout_module_put;
+
                 /* only call the device specific open if this
                  * is the first time the port is opened */
                 retval = serial->type->open(tty, port, filp);
                 if (retval)
                         goto bailout_interface_put;
+                mutex_unlock(&serial->disc_mutex);
         }
 
         mutex_unlock(&port->mutex);
@@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 bailout_interface_put:
         usb_autopm_put_interface(serial->interface);
 bailout_module_put:
+        mutex_unlock(&serial->disc_mutex);
         module_put(serial->type->driver.owner);
 bailout_mutex_unlock:
         port->port.count = 0;
         tty->driver_data = NULL;
         tty_port_tty_set(&port->port, NULL);
         mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+        put_device(&port->dev);
+bailout_serial_put:
         usb_serial_put(serial);
         return retval;
 }
@@ -262,6 +262,9 @@ bailout_kref_put:
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
         struct usb_serial_port *port = tty->driver_data;
+        struct usb_serial *serial;
+        struct module *owner;
+        int count;
 
         if (!port)
                 return;
@@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
         dbg("%s - port %d", __func__, port->number);
 
         mutex_lock(&port->mutex);
+        serial = port->serial;
+        owner = serial->type->driver.owner;
 
         if (port->port.count == 0) {
                 mutex_unlock(&port->mutex);
@@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
                  * this before we drop the port count. The call is protected
                  * by the port mutex
                  */
-                port->serial->type->close(tty, port, filp);
+                serial->type->close(tty, port, filp);
 
         if (port->port.count == (port->console ? 2 : 1)) {
                 struct tty_struct *tty = tty_port_tty_get(&port->port);
@@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
                 }
         }
 
-        if (port->port.count == 1) {
-                mutex_lock(&port->serial->disc_mutex);
-                if (!port->serial->disconnected)
-                        usb_autopm_put_interface(port->serial->interface);
-                mutex_unlock(&port->serial->disc_mutex);
-                module_put(port->serial->type->driver.owner);
-        }
         --port->port.count;
-
+        count = port->port.count;
         mutex_unlock(&port->mutex);
-        usb_serial_put(port->serial);
+        put_device(&port->dev);
+
+        /* Mustn't dereference port any more */
+        if (count == 0) {
+                mutex_lock(&serial->disc_mutex);
+                if (!serial->disconnected)
+                        usb_autopm_put_interface(serial->interface);
+                mutex_unlock(&serial->disc_mutex);
+        }
+        usb_serial_put(serial);
+
+        /* Mustn't dereference serial any more */
+        if (count == 0)
+                module_put(owner);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port)
 
 static void port_free(struct usb_serial_port *port)
 {
+        /*
+         * Stop all the traffic before cancelling the work, so that
+         * nobody will restart it by calling usb_serial_port_softint.
+         */
         kill_traffic(port);
+        cancel_work_sync(&port->work);
+
         usb_free_urb(port->read_urb);
         usb_free_urb(port->write_urb);
         usb_free_urb(port->interrupt_in_urb);
@@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port)
         kfree(port->bulk_out_buffer);
         kfree(port->interrupt_in_buffer);
         kfree(port->interrupt_out_buffer);
-        flush_scheduled_work();         /* port->work */
         kfree(port);
 }
 
@@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface)
         usb_set_intfdata(interface, NULL);
         /* must set a flag, to signal subdrivers */
         serial->disconnected = 1;
+        mutex_unlock(&serial->disc_mutex);
+
+        /* Unfortunately, many of the sub-drivers expect the port structures
+         * to exist when their shutdown method is called, so we have to go
+         * through this awkward two-step unregistration procedure.
+         */
         for (i = 0; i < serial->num_ports; ++i) {
                 port = serial->port[i];
                 if (port) {
@@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface)
                                 tty_kref_put(tty);
                         }
                         kill_traffic(port);
+                        cancel_work_sync(&port->work);
+                        device_del(&port->dev);
+                }
+        }
+        serial->type->shutdown(serial);
+        for (i = 0; i < serial->num_ports; ++i) {
+                port = serial->port[i];
+                if (port) {
+                        put_device(&port->dev);
+                        serial->port[i] = NULL;
                 }
         }
+
         /* let the last holder of this object
          * cause it to be cleaned up */
-        mutex_unlock(&serial->disc_mutex);
         usb_serial_put(serial);
         dev_info(dev, "device disconnected\n");
 }
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 4facce3d9364..5ac414bda718 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
         priv->throttled = 0;
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        /*
-         * Force low_latency on so that our tty_push actually forces the data
-         * through, otherwise it is scheduled, and with high data rates (like
-         * with OHCI) data can get lost.
-         */
-        if (tty)
-                tty->low_latency = 1;
-
         /* Start reading from the device */
         usb_fill_bulk_urb(port->read_urb, serial->dev,
                            usb_rcvbulkpipe(serial->dev,
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 96db479d1165..fa65a3b08601 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1851,6 +1851,12 @@ UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_CAPACITY_HEURISTICS),
 
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+                "TGE",
+                "Digital MP3 Audio Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),