USB: musb: blackfin: pm: make it work

Split the USB MMR init steps out into a helper func that both the platform
init and the resume code may call.

Then while suspending, the gpio_vrsel will change from high to low which
will generate a wakeup event and resume the system immediately, so we need
to manually drive it low before we sleep.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2 files changed, 50 insertions, 24 deletions

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 611a9d274363..32cc6d927760 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -323,30 +323,8 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
         return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static void musb_platform_reg_init(struct musb *musb)
 {
-
-        /*
-         * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
-         * and OTG HOST modes, while rev 1.1 and greater require PE7 to
-         * be low for DEVICE mode and high for HOST mode. We set it high
-         * here because we are in host mode
-         */
-
-        if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
-                printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
-                        musb->config->gpio_vrsel);
-                return -ENODEV;
-        }
-        gpio_direction_output(musb->config->gpio_vrsel, 0);
-
-        usb_nop_xceiv_register();
-        musb->xceiv = otg_get_transceiver();
-        if (!musb->xceiv) {
-                gpio_free(musb->config->gpio_vrsel);
-                return -ENODEV;
-        }
-
         if (ANOMALY_05000346) {
                 bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
                 SSYNC();
@@ -380,6 +358,33 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
                                 EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
                                 EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
         SSYNC();
+}
+
+int __init musb_platform_init(struct musb *musb, void *board_data)
+{
+
+        /*
+         * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+         * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+         * be low for DEVICE mode and high for HOST mode. We set it high
+         * here because we are in host mode
+         */
+
+        if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+                printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+                        musb->config->gpio_vrsel);
+                return -ENODEV;
+        }
+        gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+        usb_nop_xceiv_register();
+        musb->xceiv = otg_get_transceiver();
+        if (!musb->xceiv) {
+                gpio_free(musb->config->gpio_vrsel);
+                return -ENODEV;
+        }
+
+        musb_platform_reg_init(musb);
 
         if (is_host_enabled(musb)) {
                 musb->board_set_vbus = bfin_set_vbus;
@@ -394,6 +399,27 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
         return 0;
 }
 
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+                        struct musb_context_registers *musb_context)
+{
+        if (is_host_active(musb))
+                /*
+                 * During hibernate gpio_vrsel will change from high to low
+                 * low which will generate wakeup event resume the system
+                 * immediately.  Set it to 0 before hibernate to avoid this
+                 * wakeup event.
+                 */
+                gpio_set_value(musb->config->gpio_vrsel, 0);
+}
+
+void musb_platform_restore_context(struct musb *musb,
+                        struct musb_context_registers *musb_context)
+{
+        musb_platform_reg_init(musb);
+}
+#endif
+
 int musb_platform_exit(struct musb *musb)
 {
         gpio_free(musb->config->gpio_vrsel);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 69797e5b46a7..febaabcc2b35 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -487,7 +487,7 @@ struct musb_context_registers {
 };
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
+    defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
 extern void musb_platform_save_context(struct musb *musb,
                 struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,