USB: ftdi_sio: Adding VID and PID for Tellstick

I would like to add the VID and PID for Telldus Technologies Homeautomation
usb-dongle to the ftdi_sio driver.


From: Micke Prag <micke.prag@telldus.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 7 insertions, 0 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4695952b6470..c525b42dadde 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -513,6 +513,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
         { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+        { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 7eff1c03ba80..1bdda935f7d9 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -491,6 +491,12 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID   0xCC49  /* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID   0xCC4A  /* OpenPort 1.3 Universal */
 
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID                     0x1781  /* Vendor ID */
+#define TELLDUS_TELLSTICK_PID           0x0C30  /* RF control dongle 433 MHz using FT232RL */
+
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */