Merge branch 'origin' into devel

Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c

149 files changed, 5050 insertions, 3669 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 83babb0a1df7..c6c816b7ecb5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -47,6 +47,7 @@ config USB_ARCH_HAS_OHCI
         default y if CPU_SUBTYPE_SH7720
         default y if CPU_SUBTYPE_SH7721
         default y if CPU_SUBTYPE_SH7763
+        default y if CPU_SUBTYPE_SH7786
         # more:
         default PCI
 
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index b2ceb4aff233..89299a5ce168 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)      += host/
 obj-$(CONFIG_USB_R8A66597_HCD)  += host/
 obj-$(CONFIG_USB_HWA_HCD)       += host/
+obj-$(CONFIG_USB_ISP1760_HCD)   += host/
 
 obj-$(CONFIG_USB_C67X00_HCD)    += c67x00/
 
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 3f3ee1351930..d2747a49b974 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -880,16 +880,19 @@ static int usblp_wwait(struct usblp *usblp, int nonblock)
                 if (rc <= 0)
                         break;
 
-                if (usblp->flags & LP_ABORT) {
-                        if (schedule_timeout(msecs_to_jiffies(5000)) == 0) {
+                if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
+                        if (usblp->flags & LP_ABORT) {
                                 err = usblp_check_status(usblp, err);
                                 if (err == 1) { /* Paper out */
                                         rc = -ENOSPC;
                                         break;
                                 }
+                        } else {
+                                /* Prod the printer, Gentoo#251237. */
+                                mutex_lock(&usblp->mut);
+                                usblp_read_status(usblp, usblp->statusbuf);
+                                mutex_unlock(&usblp->mut);
                         }
-                } else {
-                        schedule();
                 }
         }
         set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 6ec38175a817..73c108d117b4 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -187,7 +187,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
         }
 
         /* this isn't checking for illegal values */
-        switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+        switch (usb_endpoint_type(desc)) {
         case USB_ENDPOINT_XFER_CONTROL:
                 type = "Ctrl";
                 if (speed == USB_SPEED_HIGH)    /* uframes per NAK */
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6585f527e381..df3c539f652a 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -104,7 +104,7 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
 
 #define MAX_USBFS_BUFFER_SIZE   16384
 
-static inline int connected(struct dev_state *ps)
+static int connected(struct dev_state *ps)
 {
         return (!list_empty(&ps->list) &&
                         ps->dev->state != USB_STATE_NOTATTACHED);
@@ -248,7 +248,7 @@ static void free_async(struct async *as)
         kfree(as);
 }
 
-static inline void async_newpending(struct async *as)
+static void async_newpending(struct async *as)
 {
         struct dev_state *ps = as->ps;
         unsigned long flags;
@@ -258,7 +258,7 @@ static inline void async_newpending(struct async *as)
         spin_unlock_irqrestore(&ps->lock, flags);
 }
 
-static inline void async_removepending(struct async *as)
+static void async_removepending(struct async *as)
 {
         struct dev_state *ps = as->ps;
         unsigned long flags;
@@ -268,7 +268,7 @@ static inline void async_removepending(struct async *as)
         spin_unlock_irqrestore(&ps->lock, flags);
 }
 
-static inline struct async *async_getcompleted(struct dev_state *ps)
+static struct async *async_getcompleted(struct dev_state *ps)
 {
         unsigned long flags;
         struct async *as = NULL;
@@ -283,7 +283,7 @@ static inline struct async *async_getcompleted(struct dev_state *ps)
         return as;
 }
 
-static inline struct async *async_getpending(struct dev_state *ps,
+static struct async *async_getpending(struct dev_state *ps,
                                              void __user *userurb)
 {
         unsigned long flags;
@@ -302,7 +302,7 @@ static inline struct async *async_getpending(struct dev_state *ps,
 
 static void snoop_urb(struct urb *urb, void __user *userurb)
 {
-        int j;
+        unsigned j;
         unsigned char *data = urb->transfer_buffer;
 
         if (!usbfs_snoop)
@@ -311,9 +311,9 @@ static void snoop_urb(struct urb *urb, void __user *userurb)
         dev_info(&urb->dev->dev, "direction=%s\n",
                         usb_urb_dir_in(urb) ? "IN" : "OUT");
         dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
-        dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
+        dev_info(&urb->dev->dev, "transfer_buffer_length=%u\n",
                  urb->transfer_buffer_length);
-        dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length);
+        dev_info(&urb->dev->dev, "actual_length=%u\n", urb->actual_length);
         dev_info(&urb->dev->dev, "data: ");
         for (j = 0; j < urb->transfer_buffer_length; ++j)
                 printk("%02x ", data[j]);
@@ -376,7 +376,7 @@ static void destroy_async_on_interface(struct dev_state *ps,
         destroy_async(ps, &hitlist);
 }
 
-static inline void destroy_all_async(struct dev_state *ps)
+static void destroy_all_async(struct dev_state *ps)
 {
         destroy_async(ps, &ps->async_pending);
 }
@@ -525,7 +525,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 {
         int ret = 0;
 
-        if (ps->dev->state != USB_STATE_ADDRESS
+        if (ps->dev->state != USB_STATE_UNAUTHENTICATED
+         && ps->dev->state != USB_STATE_ADDRESS
          && ps->dev->state != USB_STATE_CONFIGURED)
                 return -EHOSTUNREACH;
         if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index e1710f260b4f..40dee2ac0133 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -66,7 +66,7 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr,
         struct ep_device *ep = to_ep_device(dev);
         char *type = "unknown";
 
-        switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+        switch (usb_endpoint_type(ep->desc)) {
         case USB_ENDPOINT_XFER_CONTROL:
                 type = "Control";
                 break;
@@ -94,7 +94,7 @@ static ssize_t show_ep_interval(struct device *dev,
 
         in = (ep->desc->bEndpointAddress & USB_DIR_IN);
 
-        switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+        switch (usb_endpoint_type(ep->desc)) {
         case USB_ENDPOINT_XFER_CONTROL:
                 if (ep->udev->speed == USB_SPEED_HIGH)  /* uframes per NAK */
                         interval = ep->desc->bInterval;
@@ -131,10 +131,9 @@ static ssize_t show_ep_direction(struct device *dev,
         struct ep_device *ep = to_ep_device(dev);
         char *direction;
 
-        if ((ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                        USB_ENDPOINT_XFER_CONTROL)
+        if (usb_endpoint_xfer_control(ep->desc))
                 direction = "both";
-        else if (ep->desc->bEndpointAddress & USB_DIR_IN)
+        else if (usb_endpoint_dir_in(ep->desc))
                 direction = "in";
         else
                 direction = "out";
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 3c711db55d86..81fa8506825d 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -279,9 +279,9 @@ static const u8 hs_rh_config_descriptor [] = {
  * helper routine for returning string descriptors in UTF-16LE
  * input can actually be ISO-8859-1; ASCII is its 7-bit subset
  */
-static int ascii2utf (char *s, u8 *utf, int utfmax)
+static unsigned ascii2utf(char *s, u8 *utf, int utfmax)
 {
-        int retval;
+        unsigned retval;
 
         for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
                 *utf++ = *s++;
@@ -304,19 +304,15 @@ static int ascii2utf (char *s, u8 *utf, int utfmax)
  * Produces either a manufacturer, product or serial number string for the
  * virtual root hub device.
  */
-static int rh_string (
-        int             id,
-        struct usb_hcd  *hcd,
-        u8              *data,
-        int             len
-) {
+static unsigned rh_string(int id, struct usb_hcd *hcd, u8 *data, unsigned len)
+{
         char buf [100];
 
         // language ids
         if (id == 0) {
                 buf[0] = 4;    buf[1] = 3;      /* 4 bytes string data */
                 buf[2] = 0x09; buf[3] = 0x04;   /* MSFT-speak for "en-us" */
-                len = min (len, 4);
+                len = min_t(unsigned, len, 4);
                 memcpy (data, buf, len);
                 return len;
 
@@ -332,10 +328,7 @@ static int rh_string (
         } else if (id == 3) {
                 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
                         init_utsname()->release, hcd->driver->description);
-
-        // unsupported IDs --> "protocol stall"
-        } else
-                return -EPIPE;
+        }
 
         switch (len) {          /* All cases fall through */
         default:
@@ -360,9 +353,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
         u8              tbuf [sizeof (struct usb_hub_descriptor)]
                 __attribute__((aligned(4)));
         const u8        *bufp = tbuf;
-        int             len = 0;
+        unsigned        len = 0;
         int             status;
-        int             n;
         u8              patch_wakeup = 0;
         u8              patch_protocol = 0;
 
@@ -456,10 +448,11 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
                                 patch_wakeup = 1;
                         break;
                 case USB_DT_STRING << 8:
-                        n = rh_string (wValue & 0xff, hcd, ubuf, wLength);
-                        if (n < 0)
+                        if ((wValue & 0xff) < 4)
+                                urb->actual_length = rh_string(wValue & 0xff,
+                                                hcd, ubuf, wLength);
+                        else /* unsupported IDs --> "protocol stall" */
                                 goto error;
-                        urb->actual_length = n;
                         break;
                 default:
                         goto error;
@@ -629,7 +622,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
 {
         int             retval;
         unsigned long   flags;
-        int             len = 1 + (urb->dev->maxchild / 8);
+        unsigned        len = 1 + (urb->dev->maxchild / 8);
 
         spin_lock_irqsave (&hcd_root_hub_lock, flags);
         if (hcd->status_urb || urb->transfer_buffer_length < len) {
@@ -901,7 +894,7 @@ static int register_root_hub(struct usb_hcd *hcd)
 
         mutex_lock(&usb_bus_list_lock);
 
-        usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+        usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
         retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
         if (retval != sizeof usb_dev->descriptor) {
                 mutex_unlock(&usb_bus_list_lock);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index cd50d86029e7..be86ae3f4088 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -392,7 +392,7 @@ static void hub_irq(struct urb *urb)
 {
         struct usb_hub *hub = urb->context;
         int status = urb->status;
-        int i;
+        unsigned i;
         unsigned long bits;
 
         switch (status) {
@@ -1305,6 +1305,7 @@ void usb_set_device_state(struct usb_device *udev,
                 recursively_mark_NOTATTACHED(udev);
         spin_unlock_irqrestore(&device_state_lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_set_device_state);
 
 /*
  * WUSB devices are simple: they have no hubs behind, so the mapping
@@ -2471,20 +2472,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
          */
         switch (udev->speed) {
         case USB_SPEED_VARIABLE:        /* fixed at 512 */
-                udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+                udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
                 break;
         case USB_SPEED_HIGH:            /* fixed at 64 */
-                udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+                udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
                 break;
         case USB_SPEED_FULL:            /* 8, 16, 32, or 64 */
                 /* to determine the ep0 maxpacket size, try to read
                  * the device descriptor to get bMaxPacketSize0 and
                  * then correct our initial guess.
                  */
-                udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+                udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
                 break;
         case USB_SPEED_LOW:             /* fixed at 8 */
-                udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
+                udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
                 break;
         default:
                 goto fail;
@@ -3392,10 +3393,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
                 udev->descriptor = descriptor;  /* for disconnect() calls */
                 goto re_enumerate;
         }
-  
+
+        /* Restore the device's previous configuration */
         if (!udev->actconfig)
                 goto done;
-
         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
                         USB_REQ_SET_CONFIGURATION, 0,
                         udev->actconfig->desc.bConfigurationValue, 0,
@@ -3408,16 +3409,25 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
         }
         usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
+        /* Put interfaces back into the same altsettings as before.
+         * Don't bother to send the Set-Interface request for interfaces
+         * that were already in altsetting 0; besides being unnecessary,
+         * many devices can't handle it.  Instead just reset the host-side
+         * endpoint state.
+         */
         for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
                 struct usb_interface *intf = udev->actconfig->interface[i];
                 struct usb_interface_descriptor *desc;
 
-                /* set_interface resets host side toggle even
-                 * for altsetting zero.  the interface may have no driver.
-                 */
                 desc = &intf->cur_altsetting->desc;
-                ret = usb_set_interface(udev, desc->bInterfaceNumber,
-                        desc->bAlternateSetting);
+                if (desc->bAlternateSetting == 0) {
+                        usb_disable_interface(udev, intf, true);
+                        usb_enable_interface(udev, intf, true);
+                        ret = 0;
+                } else {
+                        ret = usb_set_interface(udev, desc->bInterfaceNumber,
+                                        desc->bAlternateSetting);
+                }
                 if (ret < 0) {
                         dev_err(&udev->dev, "failed to restore interface %d "
                                 "altsetting %d (error=%d)\n",
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 49e7f56e0d7f..30a0690f3683 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -59,7 +59,7 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
                 retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status);
 
                 dev_dbg(&urb->dev->dev,
-                        "%s timed out on ep%d%s len=%d/%d\n",
+                        "%s timed out on ep%d%s len=%u/%u\n",
                         current->comm,
                         usb_endpoint_num(&urb->ep->desc),
                         usb_urb_dir_in(urb) ? "in" : "out",
@@ -804,18 +804,16 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
                         dev_err(&dev->dev,
                                 "string descriptor 0 read error: %d\n",
                                 err);
-                        goto errout;
                 } else if (err < 4) {
                         dev_err(&dev->dev, "string descriptor 0 too short\n");
-                        err = -EINVAL;
-                        goto errout;
                 } else {
-                        dev->have_langid = 1;
                         dev->string_langid = tbuf[2] | (tbuf[3] << 8);
                         /* always use the first langid listed */
                         dev_dbg(&dev->dev, "default language 0x%04x\n",
                                 dev->string_langid);
                 }
+
+                dev->have_langid = 1;
         }
 
         err = usb_string_sub(dev, dev->string_langid, index, tbuf);
@@ -1719,7 +1717,8 @@ free_interfaces:
         }
         kfree(new_interfaces);
 
-        if (cp->string == NULL)
+        if (cp->string == NULL &&
+                        !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
                 cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
 
         /* Now that all the interfaces are set up, register them
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index c070b34b669d..ab93918d9207 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -54,6 +54,10 @@ static const struct usb_device_id usb_quirk_list[] = {
         { USB_DEVICE(0x0638, 0x0a13), .driver_info =
           USB_QUIRK_STRING_FETCH_255 },
 
+        /* Saitek Cyborg Gold Joystick */
+        { USB_DEVICE(0x06a3, 0x0006), .driver_info =
+                        USB_QUIRK_CONFIG_INTF_STRINGS },
+
         /* M-Systems Flash Disk Pioneers */
         { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4cc2456ef3be..c66789197927 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/usb.h>
+#include <linux/usb/quirks.h>
 #include "usb.h"
 
 /* Active configuration fields */
@@ -813,7 +814,8 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf)
         if (intf->sysfs_files_created || intf->unregistering)
                 return 0;
 
-        if (alt->string == NULL)
+        if (alt->string == NULL &&
+                        !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
                 alt->string = usb_cache_string(udev, alt->desc.iInterface);
         if (alt->string)
                 retval = device_create_file(&intf->dev, &dev_attr_interface);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 58bc5e3c2560..3376055f36e7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -295,7 +295,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
         if (!urb || urb->hcpriv || !urb->complete)
                 return -EINVAL;
         dev = urb->dev;
-        if ((!dev) || (dev->state < USB_STATE_DEFAULT))
+        if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
                 return -ENODEV;
 
         /* For now, get the endpoint from the pipe.  Eventually drivers
@@ -370,7 +370,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
         }
 
         /* the I/O buffer must be mapped/unmapped, except when length=0 */
-        if (urb->transfer_buffer_length < 0)
+        if (urb->transfer_buffer_length > INT_MAX)
                 return -EMSGSIZE;
 
 #ifdef DEBUG
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index e55fef52a5dc..770b3eaa9184 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -254,6 +254,7 @@ config USB_PXA25X_SMALL
 config USB_GADGET_PXA27X
         boolean "PXA 27x"
         depends on ARCH_PXA && PXA27x
+        select USB_OTG_UTILS
         help
            Intel's PXA 27x series XScale ARM v5TE processors include
            an integrated full speed USB 1.1 device controller.
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index abf8192f89e8..826f3adde5d8 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -551,7 +551,7 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp)
                 dma_desc->status = AMD_ADDBITS(dma_desc->status,
                                                 UDC_DMA_STP_STS_BS_HOST_BUSY,
                                                 UDC_DMA_STP_STS_BS);
-                dma_desc->bufptr = __constant_cpu_to_le32(DMA_DONT_USE);
+                dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE);
                 req->td_data = dma_desc;
                 req->td_data_last = NULL;
                 req->chain_len = 1;
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 65b03e3445a1..c22fab164113 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1017,7 +1017,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = {
         .bDescriptorType = USB_DT_ENDPOINT,
         .bEndpointAddress = 0,
         .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-        .wMaxPacketSize = __constant_cpu_to_le16(64),
+        .wMaxPacketSize = cpu_to_le16(64),
         /* FIXME: I have no idea what to put here */
         .bInterval = 1,
 };
@@ -1207,21 +1207,21 @@ static int do_test_mode(struct usba_udc *udc)
 /* Avoid overly long expressions */
 static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
 {
-        if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+        if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
                 return true;
         return false;
 }
 
 static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
 {
-        if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
+        if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE))
                 return true;
         return false;
 }
 
 static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
 {
-        if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
+        if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT))
                 return true;
         return false;
 }
@@ -1239,7 +1239,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
                         status = cpu_to_le16(udc->devstatus);
                 } else if (crq->bRequestType
                                 == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-                        status = __constant_cpu_to_le16(0);
+                        status = cpu_to_le16(0);
                 } else if (crq->bRequestType
                                 == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
                         struct usba_ep *target;
@@ -1250,12 +1250,12 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 
                         status = 0;
                         if (is_stalled(udc, target))
-                                status |= __constant_cpu_to_le16(1);
+                                status |= cpu_to_le16(1);
                 } else
                         goto delegate;
 
                 /* Write directly to the FIFO. No queueing is done. */
-                if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
+                if (crq->wLength != cpu_to_le16(sizeof(status)))
                         goto stall;
                 ep->state = DATA_STAGE_IN;
                 __raw_writew(status, ep->fifo);
@@ -1274,7 +1274,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
                 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
                         struct usba_ep *target;
 
-                        if (crq->wLength != __constant_cpu_to_le16(0)
+                        if (crq->wLength != cpu_to_le16(0)
                                         || !feature_is_ep_halt(crq))
                                 goto stall;
                         target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
@@ -1308,7 +1308,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
                 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
                         struct usba_ep *target;
 
-                        if (crq->wLength != __constant_cpu_to_le16(0)
+                        if (crq->wLength != cpu_to_le16(0)
                                         || !feature_is_ep_halt(crq))
                                 goto stall;
 
@@ -1514,7 +1514,7 @@ restart:
                          */
                         ep->state = DATA_STAGE_IN;
                 } else {
-                        if (crq.crq.wLength != __constant_cpu_to_le16(0))
+                        if (crq.crq.wLength != cpu_to_le16(0))
                                 ep->state = DATA_STAGE_OUT;
                         else
                                 ep->state = STATUS_STAGE_IN;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 5495b171cf29..928137d3dbdc 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -66,7 +66,7 @@ static struct usb_device_descriptor device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
 
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
 
         .bDeviceClass =         USB_CLASS_COMM,
         .bDeviceSubClass =      0,
@@ -74,8 +74,8 @@ static struct usb_device_descriptor device_desc = {
         /* .bMaxPacketSize0 = f(hardware) */
 
         /* Vendor and product id can be overridden by module parameters.  */
-        .idVendor =             __constant_cpu_to_le16(CDC_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16(CDC_PRODUCT_NUM),
+        .idVendor =             cpu_to_le16(CDC_VENDOR_NUM),
+        .idProduct =            cpu_to_le16(CDC_PRODUCT_NUM),
         /* .bcdDevice = f(hardware) */
         /* .iManufacturer = DYNAMIC */
         /* .iProduct = DYNAMIC */
@@ -193,7 +193,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
                                 gadget->name,
                                 cdc_config_driver.label);
                 device_desc.bcdDevice =
-                        __constant_cpu_to_le16(0x0300 | 0x0099);
+                        cpu_to_le16(0x0300 | 0x0099);
         }
 
 
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index bebf911c7e5f..22c65960c429 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -56,7 +56,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
@@ -2626,7 +2625,7 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
         INIT_LIST_HEAD(&udc->gadget.ep_list);
         udc->gadget.ep0 = NULL;
 
-        strcpy(udc->gadget.dev.bus_id, "gadget");
+        dev_set_name(&udc->gadget.dev, "gadget");
         udc->gadget.dev.dma_mask = dev->dma_mask;
         udc->gadget.dev.parent   = dev;
         udc->gadget.dev.release  = udc_release;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5d11c291f1ad..59e85234fa0a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -149,16 +149,17 @@ done:
 int usb_function_deactivate(struct usb_function *function)
 {
         struct usb_composite_dev        *cdev = function->config->cdev;
+        unsigned long                   flags;
         int                             status = 0;
 
-        spin_lock(&cdev->lock);
+        spin_lock_irqsave(&cdev->lock, flags);
 
         if (cdev->deactivations == 0)
                 status = usb_gadget_disconnect(cdev->gadget);
         if (status == 0)
                 cdev->deactivations++;
 
-        spin_unlock(&cdev->lock);
+        spin_unlock_irqrestore(&cdev->lock, flags);
         return status;
 }
 
@@ -1013,7 +1014,7 @@ composite_suspend(struct usb_gadget *gadget)
         struct usb_composite_dev        *cdev = get_gadget_data(gadget);
         struct usb_function             *f;
 
-        /* REVISIT:  should we have config and device level
+        /* REVISIT:  should we have config level
          * suspend/resume callbacks?
          */
         DBG(cdev, "suspend\n");
@@ -1023,6 +1024,8 @@ composite_suspend(struct usb_gadget *gadget)
                                 f->suspend(f);
                 }
         }
+        if (composite->suspend)
+                composite->suspend(cdev);
 }
 
 static void
@@ -1031,10 +1034,12 @@ composite_resume(struct usb_gadget *gadget)
         struct usb_composite_dev        *cdev = get_gadget_data(gadget);
         struct usb_function             *f;
 
-        /* REVISIT:  should we have config and device level
+        /* REVISIT:  should we have config level
          * suspend/resume callbacks?
          */
         DBG(cdev, "resume\n");
+        if (composite->resume)
+                composite->resume(cdev);
         if (cdev->config) {
                 list_for_each_entry(f, &cdev->config->functions, list) {
                         if (f->resume)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 9064696636ac..a56b24d305f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1437,7 +1437,7 @@ restart:
                                         }
                                         if (urb->transfer_buffer_length > 1)
                                                 buf [1] = 0;
-                                        urb->actual_length = min (2,
+                                        urb->actual_length = min_t(u32, 2,
                                                 urb->transfer_buffer_length);
                                         value = 0;
                                         status = 0;
@@ -1626,7 +1626,7 @@ static int dummy_hub_control (
                 hub_descriptor ((struct usb_hub_descriptor *) buf);
                 break;
         case GetHubStatus:
-                *(__le32 *) buf = __constant_cpu_to_le32 (0);
+                *(__le32 *) buf = cpu_to_le32 (0);
                 break;
         case GetPortStatus:
                 if (wIndex != 1)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index a36b1175b18d..cd0914ec898e 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -148,7 +148,7 @@ ep_matches (
                         return 0;
 
                 /* BOTH:  "high bandwidth" works only at high speed */
-                if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+                if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
                         if (!gadget->is_dualspeed)
                                 return 0;
                         /* configure your hardware with enough buffering!! */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 37252d0012a7..d006dc652e02 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -156,7 +156,7 @@ static struct usb_device_descriptor device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
 
-        .bcdUSB =               __constant_cpu_to_le16 (0x0200),
+        .bcdUSB =               cpu_to_le16 (0x0200),
 
         .bDeviceClass =         USB_CLASS_COMM,
         .bDeviceSubClass =      0,
@@ -167,8 +167,8 @@ static struct usb_device_descriptor device_desc = {
          * we support.  (As does bNumConfigurations.)  These values can
          * also be overridden by module parameters.
          */
-        .idVendor =             __constant_cpu_to_le16 (CDC_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16 (CDC_PRODUCT_NUM),
+        .idVendor =             cpu_to_le16 (CDC_VENDOR_NUM),
+        .idProduct =            cpu_to_le16 (CDC_PRODUCT_NUM),
         /* .bcdDevice = f(hardware) */
         /* .iManufacturer = DYNAMIC */
         /* .iProduct = DYNAMIC */
@@ -318,7 +318,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
                                 gadget->name,
                                 eth_config_driver.label);
                 device_desc.bcdDevice =
-                        __constant_cpu_to_le16(0x0300 | 0x0099);
+                        cpu_to_le16(0x0300 | 0x0099);
         }
 
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index c1d34df0b157..7953948bfe4a 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -125,7 +125,7 @@ static struct usb_cdc_header_desc acm_header_desc __initdata = {
         .bLength =              sizeof(acm_header_desc),
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
-        .bcdCDC =               __constant_cpu_to_le16(0x0110),
+        .bcdCDC =               cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_call_mgmt_descriptor
@@ -159,7 +159,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = {
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+        .wMaxPacketSize =       cpu_to_le16(GS_NOTIFY_MAXPACKET),
         .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
 };
 
@@ -197,7 +197,7 @@ static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = {
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+        .wMaxPacketSize =       cpu_to_le16(GS_NOTIFY_MAXPACKET),
         .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
 };
 
@@ -205,14 +205,14 @@ static struct usb_endpoint_descriptor acm_hs_in_desc __initdata = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor acm_hs_out_desc __initdata = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *acm_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 4ae579948e54..ecf5bdd0ae06 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -130,7 +130,7 @@ static struct usb_cdc_header_desc ecm_header_desc __initdata = {
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
 
-        .bcdCDC =               __constant_cpu_to_le16(0x0110),
+        .bcdCDC =               cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_union_desc ecm_union_desc __initdata = {
@@ -148,9 +148,9 @@ static struct usb_cdc_ether_desc ecm_desc __initdata = {
 
         /* this descriptor actually adds value, surprise! */
         /* .iMACAddress = DYNAMIC */
-        .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
-        .wMaxSegmentSize =      __constant_cpu_to_le16(ETH_FRAME_LEN),
-        .wNumberMCFilters =     __constant_cpu_to_le16(0),
+        .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */
+        .wMaxSegmentSize =      cpu_to_le16(ETH_FRAME_LEN),
+        .wNumberMCFilters =     cpu_to_le16(0),
         .bNumberPowerFilters =  0,
 };
 
@@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(ECM_STATUS_BYTECOUNT),
+        .wMaxPacketSize =       cpu_to_le16(ECM_STATUS_BYTECOUNT),
         .bInterval =            1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
@@ -236,7 +236,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(ECM_STATUS_BYTECOUNT),
+        .wMaxPacketSize =       cpu_to_le16(ECM_STATUS_BYTECOUNT),
         .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
 };
 static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
@@ -245,7 +245,7 @@ static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
@@ -254,7 +254,7 @@ static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_OUT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *ecm_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 8affe1dfc2c1..eb6ddfc20857 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -100,7 +100,7 @@ static struct usb_endpoint_descriptor hs_loop_source_desc = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_loop_sink_desc = {
@@ -108,7 +108,7 @@ static struct usb_endpoint_descriptor hs_loop_sink_desc = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_loopback_descs[] = {
@@ -359,7 +359,7 @@ static struct usb_configuration loopback_driver = {
  * loopback_add - add a loopback testing configuration to a device
  * @cdev: the device to support the loopback configuration
  */
-int __init loopback_add(struct usb_composite_dev *cdev)
+int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 {
         int id;
 
@@ -372,6 +372,10 @@ int __init loopback_add(struct usb_composite_dev *cdev)
         loopback_intf.iInterface = id;
         loopback_driver.iConfiguration = id;
 
+        /* support autoresume for remote wakeup testing */
+        if (autoresume)
+                sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+
         /* support OTG systems */
         if (gadget_is_otg(cdev->gadget)) {
                 loopback_driver.descriptors = otg_desc;
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 38aa896cc5db..46d6266f30ec 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -123,7 +123,7 @@ static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = {
         .bLength                = sizeof(obex_cdc_header_desc),
         .bDescriptorType        = USB_DT_CS_INTERFACE,
         .bDescriptorSubType     = USB_CDC_HEADER_TYPE,
-        .bcdCDC                 = __constant_cpu_to_le16(0x0120),
+        .bcdCDC                 = cpu_to_le16(0x0120),
 };
 
 static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
@@ -138,7 +138,7 @@ static struct usb_cdc_obex_desc obex_desc __initdata = {
         .bLength                = sizeof(obex_desc),
         .bDescriptorType        = USB_DT_CS_INTERFACE,
         .bDescriptorSubType     = USB_CDC_OBEX_TYPE,
-        .bcdVersion             = __constant_cpu_to_le16(0x0100),
+        .bcdVersion             = cpu_to_le16(0x0100),
 };
 
 /* High-Speed Support */
@@ -149,7 +149,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
 
         .bEndpointAddress       = USB_DIR_OUT,
         .bmAttributes           = USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize         = __constant_cpu_to_le16(512),
+        .wMaxPacketSize         = cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
@@ -158,7 +158,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
 
         .bEndpointAddress       = USB_DIR_IN,
         .bmAttributes           = USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize         = __constant_cpu_to_le16(512),
+        .wMaxPacketSize         = cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index c0916c7b217e..c1abeb89b413 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -79,7 +79,7 @@ pn_header_desc = {
         .bLength =              sizeof pn_header_desc,
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
-        .bcdCDC =               __constant_cpu_to_le16(0x0110),
+        .bcdCDC =               cpu_to_le16(0x0110),
 };
 
 static const struct usb_cdc_header_desc
@@ -87,7 +87,7 @@ pn_phonet_desc = {
         .bLength =              sizeof pn_phonet_desc,
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_PHONET_TYPE,
-        .bcdCDC =               __constant_cpu_to_le16(0x1505), /* ??? */
+        .bcdCDC =               cpu_to_le16(0x1505), /* ??? */
 };
 
 static struct usb_cdc_union_desc
@@ -138,7 +138,7 @@ pn_hs_sink_desc = {
 
         .bEndpointAddress =     USB_DIR_OUT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor
@@ -157,7 +157,7 @@ pn_hs_source_desc = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *fs_pn_function[] = {
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3a8bb53fc473..3279a4726042 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -137,7 +137,7 @@ static struct usb_cdc_header_desc header_desc __initdata = {
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
 
-        .bcdCDC =               __constant_cpu_to_le16(0x0110),
+        .bcdCDC =               cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = {
@@ -187,7 +187,7 @@ static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(STATUS_BYTECOUNT),
+        .wMaxPacketSize =       cpu_to_le16(STATUS_BYTECOUNT),
         .bInterval =            1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
@@ -230,7 +230,7 @@ static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(STATUS_BYTECOUNT),
+        .wMaxPacketSize =       cpu_to_le16(STATUS_BYTECOUNT),
         .bInterval =            LOG2_STATUS_INTERVAL_MSEC + 4,
 };
 static struct usb_endpoint_descriptor hs_in_desc __initdata = {
@@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_in_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_out_desc __initdata = {
@@ -248,7 +248,7 @@ static struct usb_endpoint_descriptor hs_out_desc __initdata = {
 
         .bEndpointAddress =     USB_DIR_OUT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *eth_hs_function[] __initdata = {
@@ -437,7 +437,7 @@ invalid:
                 DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
                         ctrl->bRequestType, ctrl->bRequest,
                         w_value, w_index, w_length);
-                req->zero = 0;
+                req->zero = (value < w_length);
                 req->length = value;
                 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
                 if (value < 0)
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index fe5674db344b..db0aa93606ef 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -89,14 +89,14 @@ static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *gser_hs_function[] __initdata = {
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index dc84d26d2835..bffe91d525f9 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -59,7 +59,6 @@ struct f_sourcesink {
 
         struct usb_ep           *in_ep;
         struct usb_ep           *out_ep;
-        struct timer_list       resume;
 };
 
 static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
@@ -67,10 +66,6 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
         return container_of(f, struct f_sourcesink, function);
 }
 
-static unsigned autoresume;
-module_param(autoresume, uint, 0);
-MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
-
 static unsigned pattern;
 module_param(pattern, uint, 0);
 MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
@@ -118,7 +113,7 @@ static struct usb_endpoint_descriptor hs_source_desc = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_sink_desc = {
@@ -126,7 +121,7 @@ static struct usb_endpoint_descriptor hs_sink_desc = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_source_sink_descs[] = {
@@ -155,21 +150,6 @@ static struct usb_gadget_strings *sourcesink_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static void sourcesink_autoresume(unsigned long _c)
-{
-        struct usb_composite_dev *cdev = (void *)_c;
-        struct usb_gadget       *g = cdev->gadget;
-
-        /* Normally the host would be woken up for something
-         * more significant than just a timer firing; likely
-         * because of some direct user request.
-         */
-        if (g->speed != USB_SPEED_UNKNOWN) {
-                int status = usb_gadget_wakeup(g);
-                DBG(cdev, "%s --> %d\n", __func__, status);
-        }
-}
-
 static int __init
 sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
 {
@@ -198,9 +178,6 @@ autoconf_fail:
                 goto autoconf_fail;
         ss->out_ep->driver_data = cdev; /* claim */
 
-        setup_timer(&ss->resume, sourcesink_autoresume,
-                        (unsigned long) c->cdev);
-
         /* support high speed hardware */
         if (gadget_is_dualspeed(c->cdev->gadget)) {
                 hs_source_desc.bEndpointAddress =
@@ -359,7 +336,6 @@ static void disable_source_sink(struct f_sourcesink *ss)
 
         cdev = ss->function.config->cdev;
         disable_endpoints(cdev, ss->in_ep, ss->out_ep);
-        del_timer(&ss->resume);
         VDBG(cdev, "%s disabled\n", ss->function.name);
 }
 
@@ -426,30 +402,6 @@ static void sourcesink_disable(struct usb_function *f)
         disable_source_sink(ss);
 }
 
-static void sourcesink_suspend(struct usb_function *f)
-{
-        struct f_sourcesink     *ss = func_to_ss(f);
-        struct usb_composite_dev *cdev = f->config->cdev;
-
-        if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
-                return;
-
-        if (autoresume) {
-                mod_timer(&ss->resume, jiffies + (HZ * autoresume));
-                DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
-        } else
-                DBG(cdev, "%s\n", __func__);
-}
-
-static void sourcesink_resume(struct usb_function *f)
-{
-        struct f_sourcesink     *ss = func_to_ss(f);
-        struct usb_composite_dev *cdev = f->config->cdev;
-
-        DBG(cdev, "%s\n", __func__);
-        del_timer(&ss->resume);
-}
-
 /*-------------------------------------------------------------------------*/
 
 static int __init sourcesink_bind_config(struct usb_configuration *c)
@@ -467,8 +419,6 @@ static int __init sourcesink_bind_config(struct usb_configuration *c)
         ss->function.unbind = sourcesink_unbind;
         ss->function.set_alt = sourcesink_set_alt;
         ss->function.disable = sourcesink_disable;
-        ss->function.suspend = sourcesink_suspend;
-        ss->function.resume = sourcesink_resume;
 
         status = usb_add_function(c, &ss->function);
         if (status)
@@ -559,7 +509,7 @@ static struct usb_configuration sourcesink_driver = {
  * sourcesink_add - add a source/sink testing configuration to a device
  * @cdev: the device to support the configuration
  */
-int __init sourcesink_add(struct usb_composite_dev *cdev)
+int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
 {
         int id;
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index fe1832875771..a9c98fdb626d 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -108,7 +108,7 @@ static struct usb_cdc_header_desc mdlm_header_desc __initdata = {
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
 
-        .bcdCDC =               __constant_cpu_to_le16(0x0110),
+        .bcdCDC =               cpu_to_le16(0x0110),
 };
 
 static struct usb_cdc_mdlm_desc mdlm_desc __initdata = {
@@ -116,7 +116,7 @@ static struct usb_cdc_mdlm_desc mdlm_desc __initdata = {
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_MDLM_TYPE,
 
-        .bcdVersion =           __constant_cpu_to_le16(0x0100),
+        .bcdVersion =           cpu_to_le16(0x0100),
         .bGUID = {
                 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
                 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
@@ -144,9 +144,9 @@ static struct usb_cdc_ether_desc ether_desc __initdata = {
 
         /* this descriptor actually adds value, surprise! */
         /* .iMACAddress = DYNAMIC */
-        .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
-        .wMaxSegmentSize =      __constant_cpu_to_le16(ETH_FRAME_LEN),
-        .wNumberMCFilters =     __constant_cpu_to_le16(0),
+        .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */
+        .wMaxSegmentSize =      cpu_to_le16(ETH_FRAME_LEN),
+        .wNumberMCFilters =     cpu_to_le16(0),
         .bNumberPowerFilters =  0,
 };
 
@@ -186,7 +186,7 @@ static struct usb_endpoint_descriptor hs_subset_in_desc __initdata = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = {
@@ -194,7 +194,7 @@ static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = {
         .bDescriptorType =      USB_DT_ENDPOINT,
 
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_descriptor_header *hs_eth_function[] __initdata = {
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 1ab9dac7e12d..5c030b080d4c 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -847,13 +847,13 @@ device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
 
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
 
         /* The next three values can be overridden by module parameters */
-        .idVendor =             __constant_cpu_to_le16(DRIVER_VENDOR_ID),
-        .idProduct =            __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
-        .bcdDevice =            __constant_cpu_to_le16(0xffff),
+        .idVendor =             cpu_to_le16(DRIVER_VENDOR_ID),
+        .idProduct =            cpu_to_le16(DRIVER_PRODUCT_ID),
+        .bcdDevice =            cpu_to_le16(0xffff),
 
         .iManufacturer =        STRING_MANUFACTURER,
         .iProduct =             STRING_PRODUCT,
@@ -926,7 +926,7 @@ fs_intr_in_desc = {
 
         .bEndpointAddress =     USB_DIR_IN,
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(2),
+        .wMaxPacketSize =       cpu_to_le16(2),
         .bInterval =            32,     // frames -> 32 ms
 };
 
@@ -954,7 +954,7 @@ dev_qualifier = {
         .bLength =              sizeof dev_qualifier,
         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
 
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
 
         .bNumConfigurations =   1,
@@ -967,7 +967,7 @@ hs_bulk_in_desc = {
 
         /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
 };
 
 static struct usb_endpoint_descriptor
@@ -977,7 +977,7 @@ hs_bulk_out_desc = {
 
         /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512),
+        .wMaxPacketSize =       cpu_to_le16(512),
         .bInterval =            1,      // NAK every 1 uframe
 };
 
@@ -988,7 +988,7 @@ hs_intr_in_desc = {
 
         /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
         .bmAttributes =         USB_ENDPOINT_XFER_INT,
-        .wMaxPacketSize =       __constant_cpu_to_le16(2),
+        .wMaxPacketSize =       cpu_to_le16(2),
         .bInterval =            9,      // 2**(9-1) = 256 uframes -> 32 ms
 };
 
@@ -1711,7 +1711,9 @@ static int do_write(struct fsg_dev *fsg)
                 curlun->sense_data = SS_WRITE_PROTECTED;
                 return -EINVAL;
         }
+        spin_lock(&curlun->filp->f_lock);
         curlun->filp->f_flags &= ~O_SYNC;       // Default is not to wait
+        spin_unlock(&curlun->filp->f_lock);
 
         /* Get the starting Logical Block Address and check that it's
          * not too big */
@@ -1728,8 +1730,11 @@ static int do_write(struct fsg_dev *fsg)
                         curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
                         return -EINVAL;
                 }
-                if (fsg->cmnd[1] & 0x08)        // FUA
+                if (fsg->cmnd[1] & 0x08) {      // FUA
+                        spin_lock(&curlun->filp->f_lock);
                         curlun->filp->f_flags |= O_SYNC;
+                        spin_unlock(&curlun->filp->f_lock);
+                }
         }
         if (lba >= curlun->num_sectors) {
                 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -2646,7 +2651,7 @@ static int send_status(struct fsg_dev *fsg)
                 struct bulk_cs_wrap     *csw = bh->buf;
 
                 /* Store and send the Bulk-only CSW */
-                csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG);
+                csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
                 csw->Tag = fsg->tag;
                 csw->Residue = cpu_to_le32(fsg->residue);
                 csw->Status = status;
@@ -3089,7 +3094,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
         /* Is the CBW valid? */
         if (req->actual != USB_BULK_CB_WRAP_LEN ||
-                        cbw->Signature != __constant_cpu_to_le32(
+                        cbw->Signature != cpu_to_le32(
                                 USB_BULK_CB_SIG)) {
                 DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
                                 req->actual,
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d8d9a52a44b3..9d7b95d4e3d2 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1802,7 +1802,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 out:
         if (retval)
-                printk("gadget driver register failed %d\n", retval);
+                printk(KERN_WARNING "gadget driver register failed %d\n",
+                       retval);
         return retval;
 }
 EXPORT_SYMBOL(usb_gadget_register_driver);
@@ -1847,7 +1848,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
         udc_controller->gadget.dev.driver = NULL;
         udc_controller->driver = NULL;
 
-        printk("unregistered gadget driver '%s'\n", driver->driver.name);
+        printk(KERN_WARNING "unregistered gadget driver '%s'\n",
+               driver->driver.name);
         return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
@@ -2455,7 +2457,7 @@ module_init(udc_init);
 static void __exit udc_exit(void)
 {
         platform_driver_unregister(&udc_driver);
-        printk("%s unregistered\n", driver_desc);
+        printk(KERN_WARNING "%s unregistered\n", driver_desc);
 }
 
 module_exit(udc_exit);
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
index dd2f16ad5a88..e84b3c47ed3c 100644
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -19,7 +19,7 @@ void disable_endpoints(struct usb_composite_dev *cdev,
                 struct usb_ep *in, struct usb_ep *out);
 
 /* configuration-specific linkup */
-int sourcesink_add(struct usb_composite_dev *cdev);
-int loopback_add(struct usb_composite_dev *cdev);
+int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume);
+int loopback_add(struct usb_composite_dev *cdev, bool autoresume);
 
 #endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 60d3f9e9b51f..b9312dc6e041 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -199,10 +199,10 @@ DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
 static struct usb_device_descriptor device_desc = {
         .bLength =              USB_DT_DEVICE_SIZE,
         .bDescriptorType =      USB_DT_DEVICE,
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
-        .idVendor =             __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+        .idVendor =             cpu_to_le16(DRIVER_VENDOR_NUM),
+        .idProduct =            cpu_to_le16(DRIVER_PRODUCT_NUM),
         .iManufacturer =        STRING_MANUFACTURER,
         .iProduct =             STRING_PRODUCT,
         .bNumConfigurations =   1,
@@ -241,8 +241,8 @@ static const struct usb_ac_header_descriptor_1 ac_header_desc = {
         .bLength =              USB_DT_AC_HEADER_SIZE(1),
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubtype =   USB_MS_HEADER,
-        .bcdADC =               __constant_cpu_to_le16(0x0100),
-        .wTotalLength =         __constant_cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
+        .bcdADC =               cpu_to_le16(0x0100),
+        .wTotalLength =         cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
         .bInCollection =        1,
         .baInterfaceNr = {
                 [0] =           GMIDI_MS_INTERFACE,
@@ -265,8 +265,8 @@ static const struct usb_ms_header_descriptor ms_header_desc = {
         .bLength =              USB_DT_MS_HEADER_SIZE,
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubtype =   USB_MS_HEADER,
-        .bcdMSC =               __constant_cpu_to_le16(0x0100),
-        .wTotalLength =         __constant_cpu_to_le16(USB_DT_MS_HEADER_SIZE
+        .bcdMSC =               cpu_to_le16(0x0100),
+        .wTotalLength =         cpu_to_le16(USB_DT_MS_HEADER_SIZE
                                 + 2*USB_DT_MIDI_IN_SIZE
                                 + 2*USB_DT_MIDI_OUT_SIZE(1)),
 };
@@ -1099,10 +1099,9 @@ static int gmidi_register_card(struct gmidi_device *dev)
                 .dev_free = gmidi_snd_free,
         };
 
-        card = snd_card_new(index, id, THIS_MODULE, 0);
-        if (!card) {
-                ERROR(dev, "snd_card_new failed\n");
-                err = -ENOMEM;
+        err = snd_card_create(index, id, THIS_MODULE, 0, &card);
+        if (err < 0) {
+                ERROR(dev, "snd_card_create failed\n");
                 goto fail;
         }
         dev->card = card;
@@ -1227,7 +1226,7 @@ autoconf_fail:
                  */
                 pr_warning("%s: controller '%s' not recognized\n",
                         shortname, gadget->name);
-                device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+                device_desc.bcdDevice = cpu_to_le16(0x9999);
         }
 
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 63419c4d503c..de010c939dbb 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1472,7 +1472,7 @@ static void ep0_setup(struct goku_udc *dev)
                                 /* active endpoint */
                                 if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
                                         goto stall;
-                                if (ctrl.wIndex & __constant_cpu_to_le16(
+                                if (ctrl.wIndex & cpu_to_le16(
                                                 USB_DIR_IN)) {
                                         if (!dev->ep[tmp].is_in)
                                                 goto stall;
@@ -1480,7 +1480,7 @@ static void ep0_setup(struct goku_udc *dev)
                                         if (dev->ep[tmp].is_in)
                                                 goto stall;
                                 }
-                                if (ctrl.wValue != __constant_cpu_to_le16(
+                                if (ctrl.wValue != cpu_to_le16(
                                                 USB_ENDPOINT_HALT))
                                         goto stall;
                                 if (tmp)
@@ -1493,7 +1493,7 @@ succeed:
                                 return;
                         case USB_RECIP_DEVICE:
                                 /* device remote wakeup: always clear */
-                                if (ctrl.wValue != __constant_cpu_to_le16(1))
+                                if (ctrl.wValue != cpu_to_le16(1))
                                         goto stall;
                                 VDBG(dev, "clear dev remote wakeup\n");
                                 goto succeed;
@@ -1519,7 +1519,7 @@ succeed:
         dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
                                 && ctrl.bRequestType == USB_RECIP_DEVICE);
         if (unlikely(dev->req_config))
-                dev->configured = (ctrl.wValue != __constant_cpu_to_le16(0));
+                dev->configured = (ctrl.wValue != cpu_to_le16(0));
 
         /* delegate everything to the gadget driver.
          * it may respond after this irq handler returns.
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 77c5d0a8a06e..168658b4b4e2 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1,7 +1,7 @@
 /*
  *      driver/usb/gadget/imx_udc.c
  *
- *      Copyright (C) 2005 Mike Lee(eemike@gmail.com)
+ *      Copyright (C) 2005 Mike Lee <eemike@gmail.com>
  *      Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -28,6 +28,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/timer.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -51,7 +52,8 @@ void ep0_chg_stat(const char *label, struct imx_udc_struct *imx_usb,
 void imx_udc_enable(struct imx_udc_struct *imx_usb)
 {
         int temp = __raw_readl(imx_usb->base + USB_CTRL);
-        __raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA, imx_usb->base + USB_CTRL);
+        __raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA,
+                                                imx_usb->base + USB_CTRL);
         imx_usb->gadget.speed = USB_SPEED_FULL;
 }
 
@@ -126,7 +128,8 @@ void imx_udc_config(struct imx_udc_struct *imx_usb)
                         for (j = 0; j < 5; j++) {
                                 __raw_writeb(ep_conf[j],
                                         imx_usb->base + USB_DDAT);
-                                do {} while (__raw_readl(imx_usb->base + USB_DADR)
+                                do {} while (__raw_readl(imx_usb->base
+                                                                + USB_DADR)
                                         & DADR_BSY);
                         }
                 }
@@ -183,7 +186,8 @@ void imx_udc_init_ep(struct imx_udc_struct *imx_usb)
                 temp = (EP_DIR(imx_ep) << 7) | (max << 5)
                         | (imx_ep->bmAttributes << 3);
                 __raw_writel(temp, imx_usb->base + USB_EP_STAT(i));
-                __raw_writel(temp | EPSTAT_FLUSH, imx_usb->base + USB_EP_STAT(i));
+                __raw_writel(temp | EPSTAT_FLUSH,
+                                                imx_usb->base + USB_EP_STAT(i));
                 D_INI(imx_usb->dev, "<%s> ep%d_stat %08x\n", __func__, i,
                         __raw_readl(imx_usb->base + USB_EP_STAT(i)));
         }
@@ -278,15 +282,18 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
         struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
         int temp, i;
 
-        D_ERR(imx_usb->dev, "<%s> Forced stall on %s\n", __func__, imx_ep->ep.name);
+        D_ERR(imx_usb->dev,
+                "<%s> Forced stall on %s\n", __func__, imx_ep->ep.name);
 
         imx_flush(imx_ep);
 
         /* Special care for ep0 */
-        if (EP_NO(imx_ep)) {
+        if (!EP_NO(imx_ep)) {
                 temp = __raw_readl(imx_usb->base + USB_CTRL);
-                __raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, imx_usb->base + USB_CTRL);
-                do { } while (__raw_readl(imx_usb->base + USB_CTRL) & CTRL_CMDOVER);
+                __raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR,
+                                                imx_usb->base + USB_CTRL);
+                do { } while (__raw_readl(imx_usb->base + USB_CTRL)
+                                                & CTRL_CMDOVER);
                 temp = __raw_readl(imx_usb->base + USB_CTRL);
                 __raw_writel(temp & ~CTRL_CMDERROR, imx_usb->base + USB_CTRL);
         }
@@ -296,12 +303,13 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
                         imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
 
                 for (i = 0; i < 100; i ++) {
-                        temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
+                        temp = __raw_readl(imx_usb->base
+                                                + USB_EP_STAT(EP_NO(imx_ep)));
                         if (!(temp & EPSTAT_STALL))
                                 break;
                         udelay(20);
                 }
-                if (i == 50)
+                if (i == 100)
                         D_ERR(imx_usb->dev, "<%s> Non finished stall on %s\n",
                                 __func__, imx_ep->ep.name);
         }
@@ -325,7 +333,8 @@ static int imx_udc_wakeup(struct usb_gadget *_gadget)
  *******************************************************************************
  */
 
-static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req)
+static void ep_add_request(struct imx_ep_struct *imx_ep,
+                                                        struct imx_request *req)
 {
         if (unlikely(!req))
                 return;
@@ -334,7 +343,8 @@ static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req
         list_add_tail(&req->queue, &imx_ep->queue);
 }
 
-static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req)
+static void ep_del_request(struct imx_ep_struct *imx_ep,
+                                                        struct imx_request *req)
 {
         if (unlikely(!req))
                 return;
@@ -343,7 +353,8 @@ static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req
         req->in_use = 0;
 }
 
-static void done(struct imx_ep_struct *imx_ep, struct imx_request *req, int status)
+static void done(struct imx_ep_struct *imx_ep,
+                                        struct imx_request *req, int status)
 {
         ep_del_request(imx_ep, req);
 
@@ -494,7 +505,8 @@ static int write_fifo(struct imx_ep_struct *imx_ep, struct imx_request *req)
                                 __func__, imx_ep->ep.name, req,
                                 completed ? "completed" : "not completed");
                         if (!EP_NO(imx_ep))
-                                ep0_chg_stat(__func__, imx_ep->imx_usb, EP0_IDLE);
+                                ep0_chg_stat(__func__,
+                                                imx_ep->imx_usb, EP0_IDLE);
                 }
         }
 
@@ -539,10 +551,9 @@ static int handle_ep0(struct imx_ep_struct *imx_ep)
         struct imx_request *req = NULL;
         int ret = 0;
 
-        if (!list_empty(&imx_ep->queue))
+        if (!list_empty(&imx_ep->queue)) {
                 req = list_entry(imx_ep->queue.next, struct imx_request, queue);
 
-        if (req) {
                 switch (imx_ep->imx_usb->ep0state) {
 
                 case EP0_IN_DATA_PHASE:                 /* GET_DESCRIPTOR */
@@ -561,6 +572,10 @@ static int handle_ep0(struct imx_ep_struct *imx_ep)
                 }
         }
 
+        else
+                D_ERR(imx_ep->imx_usb->dev, "<%s> no request on %s\n",
+                                                __func__, imx_ep->ep.name);
+
         return ret;
 }
 
@@ -583,7 +598,8 @@ static void handle_ep0_devreq(struct imx_udc_struct *imx_usb)
                                 "<%s> no setup packet received\n", __func__);
                         goto stall;
                 }
-                u.word[i] = __raw_readl(imx_usb->base + USB_EP_FDAT(EP_NO(imx_ep)));
+                u.word[i] = __raw_readl(imx_usb->base
+                                                + USB_EP_FDAT(EP_NO(imx_ep)));
         }
 
         temp = imx_ep_empty(imx_ep);
@@ -759,7 +775,7 @@ static int imx_ep_queue
         */
         if (imx_usb->set_config && !EP_NO(imx_ep)) {
                 imx_usb->set_config = 0;
-                D_EPX(imx_usb->dev,
+                D_ERR(imx_usb->dev,
                         "<%s> gadget reply set config\n", __func__);
                 return 0;
         }
@@ -779,28 +795,29 @@ static int imx_ep_queue
                 return -ESHUTDOWN;
         }
 
-        local_irq_save(flags);
-
         /* Debug */
         D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n",
                 __func__, EP_NO(imx_ep),
-                ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE)
-                || (EP_NO(imx_ep) && EP_DIR(imx_ep))) ? "IN" : "OUT", usb_req->length);
+                ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state
+                                                        == EP0_IN_DATA_PHASE)
+                || (EP_NO(imx_ep) && EP_DIR(imx_ep)))
+                                        ? "IN" : "OUT", usb_req->length);
         dump_req(__func__, imx_ep, usb_req);
 
         if (imx_ep->stopped) {
                 usb_req->status = -ESHUTDOWN;
-                ret = -ESHUTDOWN;
-                goto out;
+                return -ESHUTDOWN;
         }
 
         if (req->in_use) {
                 D_ERR(imx_usb->dev,
                         "<%s> refusing to queue req %p (already queued)\n",
                         __func__, req);
-                goto out;
+                return 0;
         }
 
+        local_irq_save(flags);
+
         usb_req->status = -EINPROGRESS;
         usb_req->actual = 0;
 
@@ -810,7 +827,7 @@ static int imx_ep_queue
                 ret = handle_ep0(imx_ep);
         else
                 ret = handle_ep(imx_ep);
-out:
+
         local_irq_restore(flags);
         return ret;
 }
@@ -997,71 +1014,32 @@ static void udc_stop_activity(struct imx_udc_struct *imx_usb,
  *******************************************************************************
  */
 
-static irqreturn_t imx_udc_irq(int irq, void *dev)
+/*
+ * Called when timer expires.
+ * Timer is started when CFG_CHG is received.
+ */
+static void handle_config(unsigned long data)
 {
-        struct imx_udc_struct *imx_usb = dev;
+        struct imx_udc_struct *imx_usb = (void *)data;
         struct usb_ctrlrequest u;
         int temp, cfg, intf, alt;
-        int intr = __raw_readl(imx_usb->base + USB_INTR);
 
-        if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
-                        | INTR_RESET_STOP | INTR_CFG_CHG)) {
-                                dump_intr(__func__, intr, imx_usb->dev);
-                                dump_usb_stat(__func__, imx_usb);
-        }
+        local_irq_disable();
 
-        if (!imx_usb->driver) {
-                /*imx_udc_disable(imx_usb);*/
-                goto end_irq;
-        }
+        temp = __raw_readl(imx_usb->base + USB_STAT);
+        cfg  = (temp & STAT_CFG) >> 5;
+        intf = (temp & STAT_INTF) >> 3;
+        alt  =  temp & STAT_ALTSET;
 
-        if (intr & INTR_WAKEUP) {
-                if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
-                        && imx_usb->driver && imx_usb->driver->resume)
-                                imx_usb->driver->resume(&imx_usb->gadget);
-                imx_usb->set_config = 0;
-                imx_usb->gadget.speed = USB_SPEED_FULL;
-        }
-
-        if (intr & INTR_SUSPEND) {
-                if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
-                        && imx_usb->driver && imx_usb->driver->suspend)
-                                imx_usb->driver->suspend(&imx_usb->gadget);
-                imx_usb->set_config = 0;
-                imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
-        }
-
-        if (intr & INTR_RESET_START) {
-                __raw_writel(intr, imx_usb->base + USB_INTR);
-                udc_stop_activity(imx_usb, imx_usb->driver);
-                imx_usb->set_config = 0;
-                imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
-        }
+        D_REQ(imx_usb->dev,
+                "<%s> orig config C=%d, I=%d, A=%d / "
+                "req config C=%d, I=%d, A=%d\n",
+                __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
+                cfg, intf, alt);
 
-        if (intr & INTR_RESET_STOP)
-                imx_usb->gadget.speed = USB_SPEED_FULL;
+        if (cfg == 1 || cfg == 2) {
 
-        if (intr & INTR_CFG_CHG) {
-                __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
-                temp = __raw_readl(imx_usb->base + USB_STAT);
-                cfg  = (temp & STAT_CFG) >> 5;
-                intf = (temp & STAT_INTF) >> 3;
-                alt  =  temp & STAT_ALTSET;
-
-                D_REQ(imx_usb->dev,
-                        "<%s> orig config C=%d, I=%d, A=%d / "
-                        "req config C=%d, I=%d, A=%d\n",
-                        __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
-                        cfg, intf, alt);
-
-                if (cfg != 1 && cfg != 2)
-                        goto end_irq;
-
-                imx_usb->set_config = 0;
-
-                /* Config setup */
                 if (imx_usb->cfg != cfg) {
-                        D_REQ(imx_usb->dev, "<%s> Change config start\n",__func__);
                         u.bRequest = USB_REQ_SET_CONFIGURATION;
                         u.bRequestType = USB_DIR_OUT |
                                         USB_TYPE_STANDARD |
@@ -1070,14 +1048,10 @@ static irqreturn_t imx_udc_irq(int irq, void *dev)
                         u.wIndex = 0;
                         u.wLength = 0;
                         imx_usb->cfg = cfg;
-                        imx_usb->set_config = 1;
                         imx_usb->driver->setup(&imx_usb->gadget, &u);
-                        imx_usb->set_config = 0;
-                        D_REQ(imx_usb->dev, "<%s> Change config done\n",__func__);
 
                 }
                 if (imx_usb->intf != intf || imx_usb->alt != alt) {
-                        D_REQ(imx_usb->dev, "<%s> Change interface start\n",__func__);
                         u.bRequest = USB_REQ_SET_INTERFACE;
                         u.bRequestType = USB_DIR_OUT |
                                           USB_TYPE_STANDARD |
@@ -1087,20 +1061,92 @@ static irqreturn_t imx_udc_irq(int irq, void *dev)
                         u.wLength = 0;
                         imx_usb->intf = intf;
                         imx_usb->alt = alt;
-                        imx_usb->set_config = 1;
                         imx_usb->driver->setup(&imx_usb->gadget, &u);
-                        imx_usb->set_config = 0;
-                        D_REQ(imx_usb->dev, "<%s> Change interface done\n",__func__);
                 }
         }
 
+        imx_usb->set_config = 0;
+
+        local_irq_enable();
+}
+
+static irqreturn_t imx_udc_irq(int irq, void *dev)
+{
+        struct imx_udc_struct *imx_usb = dev;
+        int intr = __raw_readl(imx_usb->base + USB_INTR);
+        int temp;
+
+        if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
+                        | INTR_RESET_STOP | INTR_CFG_CHG)) {
+                                dump_intr(__func__, intr, imx_usb->dev);
+                                dump_usb_stat(__func__, imx_usb);
+        }
+
+        if (!imx_usb->driver)
+                goto end_irq;
+
         if (intr & INTR_SOF) {
+                /* Copy from Freescale BSP.
+                   We must enable SOF intr and set CMDOVER.
+                   Datasheet don't specifiy this action, but it
+                   is done in Freescale BSP, so just copy it.
+                */
                 if (imx_usb->ep0state == EP0_IDLE) {
                         temp = __raw_readl(imx_usb->base + USB_CTRL);
-                        __raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL);
+                        __raw_writel(temp | CTRL_CMDOVER,
+                                                imx_usb->base + USB_CTRL);
                 }
         }
 
+        if (intr & INTR_CFG_CHG) {
+                /* A workaround of serious IMX UDC bug.
+                   Handling of CFG_CHG should be delayed for some time, because
+                   IMX does not NACK the host when CFG_CHG interrupt is pending.
+                   There is no time to handle current CFG_CHG
+                   if next CFG_CHG or SETUP packed is send immediately.
+                   We have to clear CFG_CHG, start the timer and
+                   NACK the host by setting CTRL_CMDOVER
+                   if it sends any SETUP packet.
+                   When timer expires, handler is called to handle configuration
+                   changes. While CFG_CHG is not handled (set_config=1),
+                   we must NACK the host to every SETUP packed.
+                   This delay prevents from going out of sync with host.
+                 */
+                __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
+                imx_usb->set_config = 1;
+                mod_timer(&imx_usb->timer, jiffies + 5);
+                goto end_irq;
+        }
+
+        if (intr & INTR_WAKEUP) {
+                if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
+                        && imx_usb->driver && imx_usb->driver->resume)
+                                imx_usb->driver->resume(&imx_usb->gadget);
+                imx_usb->set_config = 0;
+                del_timer(&imx_usb->timer);
+                imx_usb->gadget.speed = USB_SPEED_FULL;
+        }
+
+        if (intr & INTR_SUSPEND) {
+                if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
+                        && imx_usb->driver && imx_usb->driver->suspend)
+                                imx_usb->driver->suspend(&imx_usb->gadget);
+                imx_usb->set_config = 0;
+                del_timer(&imx_usb->timer);
+                imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+        }
+
+        if (intr & INTR_RESET_START) {
+                __raw_writel(intr, imx_usb->base + USB_INTR);
+                udc_stop_activity(imx_usb, imx_usb->driver);
+                imx_usb->set_config = 0;
+                del_timer(&imx_usb->timer);
+                imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+        }
+
+        if (intr & INTR_RESET_STOP)
+                imx_usb->gadget.speed = USB_SPEED_FULL;
+
 end_irq:
         __raw_writel(intr, imx_usb->base + USB_INTR);
         return IRQ_HANDLED;
@@ -1109,6 +1155,7 @@ end_irq:
 static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
 {
         struct imx_udc_struct *imx_usb = dev;
+        struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[0];
         int intr = __raw_readl(imx_usb->base + USB_EP_INTR(0));
 
         dump_ep_intr(__func__, 0, intr, imx_usb->dev);
@@ -1118,16 +1165,15 @@ static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
                 return IRQ_HANDLED;
         }
 
-        /* DEVREQ IRQ has highest priority */
+        /* DEVREQ has highest priority */
         if (intr & (EPINTR_DEVREQ | EPINTR_MDEVREQ))
                 handle_ep0_devreq(imx_usb);
         /* Seem i.MX is missing EOF interrupt sometimes.
-         * Therefore we monitor both EOF and FIFO_EMPTY interrups
-         * when transmiting, and both EOF and FIFO_FULL when
-         * receiving data.
+         * Therefore we don't monitor EOF.
+         * We call handle_ep0() only if a request is queued for ep0.
          */
-        else if (intr & (EPINTR_EOF | EPINTR_FIFO_EMPTY | EPINTR_FIFO_FULL))
-                handle_ep0(&imx_usb->imx_ep[0]);
+        else if (!list_empty(&imx_ep->queue))
+                handle_ep0(imx_ep);
 
         __raw_writel(intr, imx_usb->base + USB_EP_INTR(0));
 
@@ -1186,8 +1232,8 @@ static struct imx_udc_struct controller = {
                 .ep0            = &controller.imx_ep[0].ep,
                 .name           = driver_name,
                 .dev = {
-                         .bus_id        = "gadget",
-                 },
+                        .init_name      = "gadget",
+                },
         },
 
         .imx_ep[0] = {
@@ -1318,6 +1364,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
         udc_stop_activity(imx_usb, driver);
         imx_udc_disable(imx_usb);
+        del_timer(&imx_usb->timer);
 
         driver->unbind(&imx_usb->gadget);
         imx_usb->gadget.dev.driver = NULL;
@@ -1435,6 +1482,10 @@ static int __init imx_udc_probe(struct platform_device *pdev)
         usb_init_data(imx_usb);
         imx_udc_init(imx_usb);
 
+        init_timer(&imx_usb->timer);
+        imx_usb->timer.function = handle_config;
+        imx_usb->timer.data = (unsigned long)imx_usb;
+
         return 0;
 
 fail3:
@@ -1457,6 +1508,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
         int i;
 
         imx_udc_disable(imx_usb);
+        del_timer(&imx_usb->timer);
 
         for (i = 0; i < IMX_USB_NB_EP + 1; i++)
                 free_irq(imx_usb->usbd_int[i], imx_usb);
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index 850076937d8d..b48ad59603d1 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -23,7 +23,8 @@
 /* Helper macros */
 #define EP_NO(ep)       ((ep->bEndpointAddress) & ~USB_DIR_IN) /* IN:1, OUT:0 */
 #define EP_DIR(ep)      ((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0)
-#define irq_to_ep(irq)  (((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) ? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
+#define irq_to_ep(irq)  (((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) \
+                ? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
 #define ep_to_irq(ep)   (EP_NO((ep)) + USBD_INT0)
 #define IMX_USB_NB_EP   6
 
@@ -58,6 +59,7 @@ struct imx_udc_struct {
         struct device                           *dev;
         struct imx_ep_struct                    imx_ep[IMX_USB_NB_EP];
         struct clk                              *clk;
+        struct timer_list                       timer;
         enum ep0_state                          ep0state;
         struct resource                         *res;
         void __iomem                            *base;
@@ -88,8 +90,8 @@ struct imx_udc_struct {
 #define  USB_EP_FDAT3(x)        (0x3F + (x*0x30)) /* USB FIFO data */
 #define  USB_EP_FSTAT(x)        (0x40 + (x*0x30)) /* USB FIFO status */
 #define  USB_EP_FCTRL(x)        (0x44 + (x*0x30)) /* USB FIFO control */
-#define  USB_EP_LRFP(x)         (0x48 + (x*0x30)) /* USB last read frame pointer */
-#define  USB_EP_LWFP(x)         (0x4C + (x*0x30)) /* USB last write frame pointer */
+#define  USB_EP_LRFP(x)         (0x48 + (x*0x30)) /* USB last rd f. pointer */
+#define  USB_EP_LWFP(x)         (0x4C + (x*0x30)) /* USB last wr f. pointer */
 #define  USB_EP_FALRM(x)        (0x50 + (x*0x30)) /* USB FIFO alarm */
 #define  USB_EP_FRDP(x)         (0x54 + (x*0x30)) /* USB FIFO read pointer */
 #define  USB_EP_FWRP(x)         (0x58 + (x*0x30)) /* USB FIFO write pointer */
@@ -170,7 +172,7 @@ struct imx_udc_struct {
 /* #define DEBUG_IRQ */
 /* #define DEBUG_EPIRQ */
 /* #define DEBUG_DUMP */
-#define DEBUG_ERR
+/* #define DEBUG_ERR */
 
 #ifdef DEBUG_REQ
         #define D_REQ(dev, args...)     dev_dbg(dev, ## args)
@@ -228,7 +230,8 @@ struct imx_udc_struct {
 #endif /* DEBUG_IRQ */
 
 #ifdef DEBUG_EPIRQ
-        static void dump_ep_intr(const char *label, int nr, int irqreg, struct device *dev)
+        static void dump_ep_intr(const char *label, int nr, int irqreg,
+                                                        struct device *dev)
         {
                 dev_dbg(dev, "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, nr,
                         (irqreg & EPINTR_FIFO_FULL) ? " full" : "",
@@ -246,7 +249,8 @@ struct imx_udc_struct {
 #endif /* DEBUG_IRQ */
 
 #ifdef DEBUG_DUMP
-        static void dump_usb_stat(const char *label, struct imx_udc_struct *imx_usb)
+        static void dump_usb_stat(const char *label,
+                                                struct imx_udc_struct *imx_usb)
         {
                 int temp = __raw_readl(imx_usb->base + USB_STAT);
 
@@ -259,12 +263,15 @@ struct imx_udc_struct {
                         (temp & STAT_ALTSET));
         }
 
-        static void dump_ep_stat(const char *label, struct imx_ep_struct *imx_ep)
+        static void dump_ep_stat(const char *label,
+                                                struct imx_ep_struct *imx_ep)
         {
-                int temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
+                int temp = __raw_readl(imx_ep->imx_usb->base
+                                                + USB_EP_INTR(EP_NO(imx_ep)));
 
                 dev_dbg(imx_ep->imx_usb->dev,
-                        "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep),
+                        "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n",
+                        label, EP_NO(imx_ep),
                         (temp & EPINTR_FIFO_FULL) ? " full" : "",
                         (temp & EPINTR_FIFO_EMPTY) ? " fempty" : "",
                         (temp & EPINTR_FIFO_ERROR) ? " ferr" : "",
@@ -275,18 +282,22 @@ struct imx_udc_struct {
                         (temp & EPINTR_DEVREQ) ? " devreq" : "",
                         (temp & EPINTR_EOT) ? " eot" : "");
 
-                temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
+                temp = __raw_readl(imx_ep->imx_usb->base
+                                                + USB_EP_STAT(EP_NO(imx_ep)));
 
                 dev_dbg(imx_ep->imx_usb->dev,
-                        "<%s> EP%d_STAT=[%s%s bcount=%d]\n", label, EP_NO(imx_ep),
+                        "<%s> EP%d_STAT=[%s%s bcount=%d]\n",
+                        label, EP_NO(imx_ep),
                         (temp & EPSTAT_SIP) ? " sip" : "",
                         (temp & EPSTAT_STALL) ? " stall" : "",
                         (temp & EPSTAT_BCOUNT) >> 16);
 
-                temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_FSTAT(EP_NO(imx_ep)));
+                temp = __raw_readl(imx_ep->imx_usb->base
+                                                + USB_EP_FSTAT(EP_NO(imx_ep)));
 
                 dev_dbg(imx_ep->imx_usb->dev,
-                        "<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep),
+                        "<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n",
+                        label, EP_NO(imx_ep),
                         (temp & FSTAT_ERR) ? " ferr" : "",
                         (temp & FSTAT_UF) ? " funder" : "",
                         (temp & FSTAT_OF) ? " fover" : "",
@@ -296,19 +307,23 @@ struct imx_udc_struct {
                         (temp & FSTAT_EMPTY) ? " fempty" : "");
         }
 
-        static void dump_req(const char *label, struct imx_ep_struct *imx_ep, struct usb_request *req)
+        static void dump_req(const char *label, struct imx_ep_struct *imx_ep,
+                                                        struct usb_request *req)
         {
                 int i;
 
                 if (!req || !req->buf) {
-                        dev_dbg(imx_ep->imx_usb->dev, "<%s> req or req buf is free\n", label);
+                        dev_dbg(imx_ep->imx_usb->dev,
+                                        "<%s> req or req buf is free\n", label);
                         return;
                 }
 
-                if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE)
+                if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state
+                        == EP0_IN_DATA_PHASE)
                         || (EP_NO(imx_ep) && EP_DIR(imx_ep))) {
 
-                        dev_dbg(imx_ep->imx_usb->dev, "<%s> request dump <", label);
+                        dev_dbg(imx_ep->imx_usb->dev,
+                                                "<%s> request dump <", label);
                         for (i = 0; i < req->length; i++)
                                 printk("%02x-", *((u8 *)req->buf + i));
                         printk(">\n");
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 317b48fdbf01..d20937f28a19 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1334,7 +1334,7 @@ static void make_qualifier (struct dev_data *dev)
 
         qual.bLength = sizeof qual;
         qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
-        qual.bcdUSB = __constant_cpu_to_le16 (0x0200);
+        qual.bcdUSB = cpu_to_le16 (0x0200);
 
         desc = dev->dev;
         qual.bDeviceClass = desc->bDeviceClass;
@@ -1908,7 +1908,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
                         || dev->dev->bNumConfigurations != 1)
                 goto fail;
         dev->dev->bNumConfigurations = 1;
-        dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200);
+        dev->dev->bcdUSB = cpu_to_le16 (0x0200);
 
         /* triggers gadgetfs_bind(); then we can enumerate. */
         spin_unlock_irq (&dev->lock);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index d554b0895603..6cd3d54f5640 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -432,8 +432,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
         device_add(&dev->gadget.dev);
         retval = driver->bind(&dev->gadget);
         if (retval) {
-                printk("%s: bind to driver %s --> error %d\n", dev->gadget.name,
-                       driver->driver.name, retval);
+                printk(KERN_WARNING "%s: bind to driver %s --> error %d\n",
+                       dev->gadget.name, driver->driver.name, retval);
                 device_del(&dev->gadget.dev);
 
                 dev->driver = 0;
@@ -445,8 +445,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
          * for set_configuration as well as eventual disconnect.
          * NOTE:  this shouldn't power up until later.
          */
-        printk("%s: registered gadget driver '%s'\n", dev->gadget.name,
-               driver->driver.name);
+        printk(KERN_WARNING "%s: registered gadget driver '%s'\n",
+               dev->gadget.name, driver->driver.name);
 
         udc_enable(dev);
 
@@ -581,7 +581,8 @@ static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
                          * discard the extra data.
                          */
                         if (req->req.status != -EOVERFLOW)
-                                printk("%s overflow %d\n", ep->ep.name, count);
+                                printk(KERN_WARNING "%s overflow %d\n",
+                                       ep->ep.name, count);
                         req->req.status = -EOVERFLOW;
                 } else {
                         *buf++ = byte;
@@ -831,7 +832,8 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
                                                        queue);
 
                                 if (!req) {
-                                        printk("%s: NULL REQ %d\n",
+                                        printk(KERN_WARNING
+                                               "%s: NULL REQ %d\n",
                                                __func__, ep_idx);
                                         flush(ep);
                                         break;
@@ -844,7 +846,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
 
         } else {
                 /* Throw packet away.. */
-                printk("%s: No descriptor?!?\n", __func__);
+                printk(KERN_WARNING "%s: No descriptor?!?\n", __func__);
                 flush(ep);
         }
 }
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 12c6d83b218c..9498be87a724 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -142,8 +142,8 @@ static char *type_string (u8 bmAttributes)
 
 #include "net2280.h"
 
-#define valid_bit       __constant_cpu_to_le32 (1 << VALID_BIT)
-#define dma_done_ie     __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE)
+#define valid_bit       cpu_to_le32 (1 << VALID_BIT)
+#define dma_done_ie     cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE)
 
 /*-------------------------------------------------------------------------*/
 
@@ -425,7 +425,7 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
                         return NULL;
                 }
                 td->dmacount = 0;       /* not VALID */
-                td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+                td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
                 td->dmadesc = td->dmaaddr;
                 req->td = td;
         }
@@ -775,7 +775,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req)
         fill_dma_desc (ep, req, 1);
 
         if (!use_dma_chaining)
-                req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN);
+                req->td->dmacount |= cpu_to_le32 (1 << END_OF_CHAIN);
 
         start_queue (ep, tmp, req->td_dma);
 }
@@ -2407,9 +2407,9 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 
                         if (readl (&e->regs->ep_rsp)
                                         & (1 << SET_ENDPOINT_HALT))
-                                status = __constant_cpu_to_le32 (1);
+                                status = cpu_to_le32 (1);
                         else
-                                status = __constant_cpu_to_le32 (0);
+                                status = cpu_to_le32 (0);
 
                         /* don't bother with a request object! */
                         writel (0, &dev->epregs [0].ep_irqenb);
@@ -2667,7 +2667,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
                                 req = list_entry (ep->queue.next,
                                                 struct net2280_request, queue);
                                 dmacount = req->td->dmacount;
-                                dmacount &= __constant_cpu_to_le32 (
+                                dmacount &= cpu_to_le32 (
                                                 (1 << VALID_BIT)
                                                 | DMA_BYTE_COUNT_MASK);
                                 if (dmacount && (dmacount & valid_bit) == 0)
@@ -2881,7 +2881,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
                         goto done;
                 }
                 td->dmacount = 0;       /* not VALID */
-                td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+                td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID);
                 td->dmadesc = td->dmaaddr;
                 dev->ep [i].dummy = td;
         }
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 5a3034fdfe47..29500154d00c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -225,12 +225,12 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 static struct usb_device_descriptor device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
         .bDeviceSubClass =      0,
         .bDeviceProtocol =      0,
-        .idVendor =             __constant_cpu_to_le16(PRINTER_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16(PRINTER_PRODUCT_NUM),
+        .idVendor =             cpu_to_le16(PRINTER_VENDOR_NUM),
+        .idProduct =            cpu_to_le16(PRINTER_PRODUCT_NUM),
         .iManufacturer =        STRING_MANUFACTURER,
         .iProduct =             STRING_PRODUCT,
         .iSerialNumber =        STRING_SERIALNUM,
@@ -299,20 +299,20 @@ static struct usb_endpoint_descriptor hs_ep_in_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512)
+        .wMaxPacketSize =       cpu_to_le16(512)
 };
 
 static struct usb_endpoint_descriptor hs_ep_out_desc = {
         .bLength =              USB_DT_ENDPOINT_SIZE,
         .bDescriptorType =      USB_DT_ENDPOINT,
         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
-        .wMaxPacketSize =       __constant_cpu_to_le16(512)
+        .wMaxPacketSize =       cpu_to_le16(512)
 };
 
 static struct usb_qualifier_descriptor dev_qualifier = {
         .bLength =              sizeof dev_qualifier,
         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_PRINTER,
         .bNumConfigurations =   1
 };
@@ -1406,16 +1406,16 @@ printer_bind(struct usb_gadget *gadget)
                         gadget->name);
                 /* unrecognized, but safe unless bulk is REALLY quirky */
                 device_desc.bcdDevice =
-                        __constant_cpu_to_le16(0xFFFF);
+                        cpu_to_le16(0xFFFF);
         }
         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
                 init_utsname()->sysname, init_utsname()->release,
                 gadget->name);
 
         device_desc.idVendor =
-                __constant_cpu_to_le16(PRINTER_VENDOR_NUM);
+                cpu_to_le16(PRINTER_VENDOR_NUM);
         device_desc.idProduct =
-                __constant_cpu_to_le16(PRINTER_PRODUCT_NUM);
+                cpu_to_le16(PRINTER_PRODUCT_NUM);
 
         /* support optional vendor/distro customization */
         if (idVendor) {
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 990f40f988d4..8cc676ecbb23 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -30,6 +30,7 @@
 #include <linux/proc_fs.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -278,7 +279,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc)
                 goto err_queues;
         eps = debugfs_create_file("epstate", 0400, root, udc,
                         &eps_dbg_fops);
-        if (!queues)
+        if (!eps)
                 goto err_eps;
 
         udc->debugfs_root = root;
@@ -747,13 +748,13 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
 }
 
 /**
- * ep_end_out_req - Ends control endpoint in request
+ * ep_end_out_req - Ends endpoint OUT request
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends endpoint in request (completes usb request).
+ * Ends endpoint OUT request (completes usb request).
  */
 static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -762,13 +763,13 @@ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep0_end_out_req - Ends control endpoint in request (ends data stage)
+ * ep0_end_out_req - Ends control endpoint OUT request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends control endpoint in request (completes usb request), and puts
+ * Ends control endpoint OUT request (completes usb request), and puts
  * control endpoint into idle state
  */
 static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
@@ -779,13 +780,13 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep_end_in_req - Ends endpoint out request
+ * ep_end_in_req - Ends endpoint IN request
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends endpoint out request (completes usb request).
+ * Ends endpoint IN request (completes usb request).
  */
 static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -794,20 +795,18 @@ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 }
 
 /**
- * ep0_end_in_req - Ends control endpoint out request (ends data stage)
+ * ep0_end_in_req - Ends control endpoint IN request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
  *
  * Context: ep->lock held
  *
- * Ends control endpoint out request (completes usb request), and puts
+ * Ends control endpoint IN request (completes usb request), and puts
  * control endpoint into status state
  */
 static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
 {
-        struct pxa_udc *udc = ep->dev;
-
-        set_ep0state(udc, IN_STATUS_STAGE);
+        set_ep0state(ep->dev, IN_STATUS_STAGE);
         ep_end_in_req(ep, req);
 }
 
@@ -1167,7 +1166,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
                                 ep_end_in_req(ep, req);
                         } else {
                                 ep_err(ep, "got a request of %d bytes while"
-                                        "in state WATI_ACK_SET_CONF_INTERF\n",
+                                        "in state WAIT_ACK_SET_CONF_INTERF\n",
                                         length);
                                 ep_del_request(ep, req);
                                 rc = -EL2HLT;
@@ -1213,30 +1212,26 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
         struct udc_usb_ep       *udc_usb_ep;
         struct pxa27x_request   *req;
         unsigned long           flags;
-        int                     rc;
+        int                     rc = -EINVAL;
 
         if (!_ep)
-                return -EINVAL;
+                return rc;
         udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
         ep = udc_usb_ep->pxa_ep;
         if (!ep || is_ep0(ep))
-                return -EINVAL;
+                return rc;
 
         spin_lock_irqsave(&ep->lock, flags);
 
         /* make sure it's actually queued on this endpoint */
         list_for_each_entry(req, &ep->queue, queue) {
-                if (&req->req == _req)
+                if (&req->req == _req) {
+                        req_done(ep, req, -ECONNRESET);
+                        rc = 0;
                         break;
+                }
         }
 
-        rc = -EINVAL;
-        if (&req->req != _req)
-                goto out;
-
-        rc = 0;
-        req_done(ep, req, -ECONNRESET);
-out:
         spin_unlock_irqrestore(&ep->lock, flags);
         return rc;
 }
@@ -1471,6 +1466,32 @@ static struct usb_ep_ops pxa_ep_ops = {
         .fifo_flush     = pxa_ep_fifo_flush,
 };
 
+/**
+ * dplus_pullup - Connect or disconnect pullup resistor to D+ pin
+ * @udc: udc device
+ * @on: 0 if disconnect pullup resistor, 1 otherwise
+ * Context: any
+ *
+ * Handle D+ pullup resistor, make the device visible to the usb bus, and
+ * declare it as a full speed usb device
+ */
+static void dplus_pullup(struct pxa_udc *udc, int on)
+{
+        if (on) {
+                if (gpio_is_valid(udc->mach->gpio_pullup))
+                        gpio_set_value(udc->mach->gpio_pullup,
+                                       !udc->mach->gpio_pullup_inverted);
+                if (udc->mach->udc_command)
+                        udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+        } else {
+                if (gpio_is_valid(udc->mach->gpio_pullup))
+                        gpio_set_value(udc->mach->gpio_pullup,
+                                       udc->mach->gpio_pullup_inverted);
+                if (udc->mach->udc_command)
+                        udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+        }
+        udc->pullup_on = on;
+}
 
 /**
  * pxa_udc_get_frame - Returns usb frame number
@@ -1500,21 +1521,145 @@ static int pxa_udc_wakeup(struct usb_gadget *_gadget)
         return 0;
 }
 
+static void udc_enable(struct pxa_udc *udc);
+static void udc_disable(struct pxa_udc *udc);
+
+/**
+ * should_enable_udc - Tells if UDC should be enabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be enabled if :
+
+ *  - the pullup resistor is connected
+ *  - and a gadget driver is bound
+ *  - and vbus is sensed (or no vbus sense is available)
+ *
+ * Returns 1 if UDC should be enabled, 0 otherwise
+ */
+static int should_enable_udc(struct pxa_udc *udc)
+{
+        int put_on;
+
+        put_on = ((udc->pullup_on) && (udc->driver));
+        put_on &= ((udc->vbus_sensed) || (!udc->transceiver));
+        return put_on;
+}
+
+/**
+ * should_disable_udc - Tells if UDC should be disabled
+ * @udc: udc device
+ * Context: any
+ *
+ * The UDC should be disabled if :
+ *  - the pullup resistor is not connected
+ *  - or no gadget driver is bound
+ *  - or no vbus is sensed (when vbus sesing is available)
+ *
+ * Returns 1 if UDC should be disabled
+ */
+static int should_disable_udc(struct pxa_udc *udc)
+{
+        int put_off;
+
+        put_off = ((!udc->pullup_on) || (!udc->driver));
+        put_off |= ((!udc->vbus_sensed) && (udc->transceiver));
+        return put_off;
+}
+
+/**
+ * pxa_udc_pullup - Offer manual D+ pullup control
+ * @_gadget: usb gadget using the control
+ * @is_active: 0 if disconnect, else connect D+ pullup resistor
+ * Context: !in_interrupt()
+ *
+ * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup
+ */
+static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+        struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+        if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+                return -EOPNOTSUPP;
+
+        dplus_pullup(udc, is_active);
+
+        if (should_enable_udc(udc))
+                udc_enable(udc);
+        if (should_disable_udc(udc))
+                udc_disable(udc);
+        return 0;
+}
+
+static void udc_enable(struct pxa_udc *udc);
+static void udc_disable(struct pxa_udc *udc);
+
+/**
+ * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc
+ * @_gadget: usb gadget
+ * @is_active: 0 if should disable the udc, 1 if should enable
+ *
+ * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the
+ * udc, and deactivates D+ pullup resistor.
+ *
+ * Returns 0
+ */
+static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+        struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+        udc->vbus_sensed = is_active;
+        if (should_enable_udc(udc))
+                udc_enable(udc);
+        if (should_disable_udc(udc))
+                udc_disable(udc);
+
+        return 0;
+}
+
+/**
+ * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed
+ * @_gadget: usb gadget
+ * @mA: current drawn
+ *
+ * Context: !in_interrupt()
+ *
+ * Called after a configuration was chosen by a USB host, to inform how much
+ * current can be drawn by the device from VBus line.
+ *
+ * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc
+ */
+static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+        struct pxa_udc *udc;
+
+        udc = to_gadget_udc(_gadget);
+        if (udc->transceiver)
+                return otg_set_power(udc->transceiver, mA);
+        return -EOPNOTSUPP;
+}
+
 static const struct usb_gadget_ops pxa_udc_ops = {
         .get_frame      = pxa_udc_get_frame,
         .wakeup         = pxa_udc_wakeup,
-        /* current versions must always be self-powered */
+        .pullup         = pxa_udc_pullup,
+        .vbus_session   = pxa_udc_vbus_session,
+        .vbus_draw      = pxa_udc_vbus_draw,
 };
 
 /**
  * udc_disable - disable udc device controller
  * @udc: udc device
+ * Context: any
  *
  * Disables the udc device : disables clocks, udc interrupts, control endpoint
  * interrupts.
  */
 static void udc_disable(struct pxa_udc *udc)
 {
+        if (!udc->enabled)
+                return;
+
         udc_writel(udc, UDCICR0, 0);
         udc_writel(udc, UDCICR1, 0);
 
@@ -1523,8 +1668,8 @@ static void udc_disable(struct pxa_udc *udc)
 
         ep0_idle(udc);
         udc->gadget.speed = USB_SPEED_UNKNOWN;
-        if (udc->mach->udc_command)
-                udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+
+        udc->enabled = 0;
 }
 
 /**
@@ -1555,10 +1700,9 @@ static __init void udc_init_data(struct pxa_udc *dev)
         }
 
         /* USB endpoints init */
-        for (i = 0; i < NR_USB_ENDPOINTS; i++)
-                if (i != 0)
-                        list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
-                                        &dev->gadget.ep_list);
+        for (i = 1; i < NR_USB_ENDPOINTS; i++)
+                list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+                                &dev->gadget.ep_list);
 }
 
 /**
@@ -1570,6 +1714,9 @@ static __init void udc_init_data(struct pxa_udc *dev)
  */
 static void udc_enable(struct pxa_udc *udc)
 {
+        if (udc->enabled)
+                return;
+
         udc_writel(udc, UDCICR0, 0);
         udc_writel(udc, UDCICR1, 0);
         udc_clear_mask_UDCCR(udc, UDCCR_UDE);
@@ -1598,9 +1745,7 @@ static void udc_enable(struct pxa_udc *udc)
         /* enable ep0 irqs */
         pio_irq_enable(&udc->pxa_ep[0]);
 
-        dev_info(udc->dev, "UDC connecting\n");
-        if (udc->mach->udc_command)
-                udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+        udc->enabled = 1;
 }
 
 /**
@@ -1612,6 +1757,9 @@ static void udc_enable(struct pxa_udc *udc)
  * usb traffic follows until a disconnect is reported.  Then a host may connect
  * again, or the driver might get unbound.
  *
+ * Note that the udc is not automatically enabled. Check function
+ * should_enable_udc().
+ *
  * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
  */
 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
@@ -1630,6 +1778,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
         /* first hook up the driver ... */
         udc->driver = driver;
         udc->gadget.dev.driver = &driver->driver;
+        dplus_pullup(udc, 1);
 
         retval = device_add(&udc->gadget.dev);
         if (retval) {
@@ -1645,9 +1794,21 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
         dev_dbg(udc->dev, "registered gadget driver '%s'\n",
                 driver->driver.name);
 
-        udc_enable(udc);
+        if (udc->transceiver) {
+                retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+                if (retval) {
+                        dev_err(udc->dev, "can't bind to transceiver\n");
+                        goto transceiver_fail;
+                }
+        }
+
+        if (should_enable_udc(udc))
+                udc_enable(udc);
         return 0;
 
+transceiver_fail:
+        if (driver->unbind)
+                driver->unbind(&udc->gadget);
 bind_fail:
         device_del(&udc->gadget.dev);
 add_fail:
@@ -1699,14 +1860,17 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
         stop_activity(udc, driver);
         udc_disable(udc);
+        dplus_pullup(udc, 0);
 
         driver->unbind(&udc->gadget);
         udc->driver = NULL;
 
         device_del(&udc->gadget.dev);
-
         dev_info(udc->dev, "unregistered gadget driver '%s'\n",
                  driver->driver.name);
+
+        if (udc->transceiver)
+                return otg_set_peripheral(udc->transceiver, NULL);
         return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
@@ -1823,14 +1987,14 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
         struct pxa27x_request   *req = NULL;
         int                     completed = 0;
 
+        if (!list_empty(&ep->queue))
+                req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
         udccsr0 = udc_ep_readl(ep, UDCCSR);
         ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
                 EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
                 (fifo_irq << 1 | opc_irq));
 
-        if (!list_empty(&ep->queue))
-                req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-
         if (udccsr0 & UDCCSR0_SST) {
                 ep_dbg(ep, "clearing stall status\n");
                 nuke(ep, -EPIPE);
@@ -2212,7 +2376,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 {
         struct resource *regs;
         struct pxa_udc *udc = &memory;
-        int retval;
+        int retval = 0, gpio;
 
         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!regs)
@@ -2223,6 +2387,20 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
         udc->dev = &pdev->dev;
         udc->mach = pdev->dev.platform_data;
+        udc->transceiver = otg_get_transceiver();
+
+        gpio = udc->mach->gpio_pullup;
+        if (gpio_is_valid(gpio)) {
+                retval = gpio_request(gpio, "USB D+ pullup");
+                if (retval == 0)
+                        gpio_direction_output(gpio,
+                                       udc->mach->gpio_pullup_inverted);
+        }
+        if (retval) {
+                dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n",
+                        gpio, retval);
+                return retval;
+        }
 
         udc->clk = clk_get(&pdev->dev, NULL);
         if (IS_ERR(udc->clk)) {
@@ -2240,6 +2418,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
         device_initialize(&udc->gadget.dev);
         udc->gadget.dev.parent = &pdev->dev;
         udc->gadget.dev.dma_mask = NULL;
+        udc->vbus_sensed = 0;
 
         the_controller = udc;
         platform_set_drvdata(pdev, udc);
@@ -2273,14 +2452,21 @@ err_clk:
 static int __exit pxa_udc_remove(struct platform_device *_dev)
 {
         struct pxa_udc *udc = platform_get_drvdata(_dev);
+        int gpio = udc->mach->gpio_pullup;
 
         usb_gadget_unregister_driver(udc->driver);
         free_irq(udc->irq, udc);
         pxa_cleanup_debugfs(udc);
+        if (gpio_is_valid(gpio))
+                gpio_free(gpio);
+
+        otg_put_transceiver(udc->transceiver);
 
+        udc->transceiver = NULL;
         platform_set_drvdata(_dev, NULL);
         the_controller = NULL;
         clk_put(udc->clk);
+        iounmap(udc->regs);
 
         return 0;
 }
@@ -2319,6 +2505,8 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
         }
 
         udc_disable(udc);
+        udc->pullup_resume = udc->pullup_on;
+        dplus_pullup(udc, 0);
 
         return 0;
 }
@@ -2346,7 +2534,9 @@ static int pxa_udc_resume(struct platform_device *_dev)
                                 ep->udccsr_value, ep->udccr_value);
         }
 
-        udc_enable(udc);
+        dplus_pullup(udc, udc->pullup_resume);
+        if (should_enable_udc(udc))
+                udc_enable(udc);
         /*
          * We do not handle OTG yet.
          *
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 1d1b7936ee11..db58125331da 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/usb/otg.h>
 
 /*
  * Register definitions
@@ -421,10 +422,14 @@ struct udc_stats {
  * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
  * @dev: device
  * @mach: machine info, used to activate specific GPIO
+ * @transceiver: external transceiver to handle vbus sense and D+ pullup
  * @ep0state: control endpoint state machine state
  * @stats: statistics on udc usage
  * @udc_usb_ep: array of usb endpoints offered by the gadget
  * @pxa_ep: array of pxa available endpoints
+ * @enabled: UDC was enabled by a previous udc_enable()
+ * @pullup_on: if pullup resistor connected to D+ pin
+ * @pullup_resume: if pullup resistor should be connected to D+ pin on resume
  * @config: UDC active configuration
  * @last_interface: UDC interface of the last SET_INTERFACE host request
  * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
@@ -443,6 +448,7 @@ struct pxa_udc {
         struct usb_gadget_driver                *driver;
         struct device                           *dev;
         struct pxa2xx_udc_mach_info             *mach;
+        struct otg_transceiver                  *transceiver;
 
         enum ep0_state                          ep0state;
         struct udc_stats                        stats;
@@ -450,6 +456,10 @@ struct pxa_udc {
         struct udc_usb_ep                       udc_usb_ep[NR_USB_ENDPOINTS];
         struct pxa_ep                           pxa_ep[NR_PXA_ENDPOINTS];
 
+        unsigned                                enabled:1;
+        unsigned                                pullup_on:1;
+        unsigned                                pullup_resume:1;
+        unsigned                                vbus_sensed:1;
         unsigned                                config:2;
         unsigned                                last_interface:3;
         unsigned                                last_alternate:3;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 8c26f5ea2b83..2b4660e08c4d 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -63,7 +63,7 @@ MODULE_PARM_DESC (rndis_debug, "enable debugging");
 static rndis_params rndis_per_dev_params [RNDIS_MAX_CONFIGS];
 
 /* Driver Version */
-static const __le32 rndis_driver_version = __constant_cpu_to_le32 (1);
+static const __le32 rndis_driver_version = cpu_to_le32 (1);
 
 /* Function Prototypes */
 static rndis_resp_t *rndis_add_response (int configNr, u32 length);
@@ -170,7 +170,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
         int                     i, count;
         rndis_query_cmplt_type  *resp;
         struct net_device       *net;
-        struct net_device_stats *stats;
+        const struct net_device_stats   *stats;
 
         if (!r) return -ENOMEM;
         resp = (rndis_query_cmplt_type *) r->buf;
@@ -190,13 +190,10 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
         /* response goes here, right after the header */
         outbuf = (__le32 *) &resp[1];
-        resp->InformationBufferOffset = __constant_cpu_to_le32 (16);
+        resp->InformationBufferOffset = cpu_to_le32 (16);
 
         net = rndis_per_dev_params[configNr].dev;
-        if (net->get_stats)
-                stats = net->get_stats(net);
-        else
-                stats = NULL;
+        stats = dev_get_stats(net);
 
         switch (OID) {
 
@@ -221,7 +218,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
                  * reddite ergo quae sunt Caesaris Caesari
                  * et quae sunt Dei Deo!
                  */
-                *outbuf = __constant_cpu_to_le32 (0);
+                *outbuf = cpu_to_le32 (0);
                 retval = 0;
                 break;
 
@@ -256,7 +253,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
                         pr_debug("%s: OID_GEN_LINK_SPEED\n", __func__);
                 if (rndis_per_dev_params [configNr].media_state
                                 == NDIS_MEDIA_STATE_DISCONNECTED)
-                        *outbuf = __constant_cpu_to_le32 (0);
+                        *outbuf = cpu_to_le32 (0);
                 else
                         *outbuf = cpu_to_le32 (
                                 rndis_per_dev_params [configNr].speed);
@@ -317,7 +314,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
         /* mandatory */
         case OID_GEN_MAXIMUM_TOTAL_SIZE:
                 pr_debug("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__);
-                *outbuf = __constant_cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
+                *outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
                 retval = 0;
                 break;
 
@@ -332,7 +329,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
         case OID_GEN_PHYSICAL_MEDIUM:
                 pr_debug("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__);
-                *outbuf = __constant_cpu_to_le32 (0);
+                *outbuf = cpu_to_le32 (0);
                 retval = 0;
                 break;
 
@@ -342,7 +339,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
          */
         case OID_GEN_MAC_OPTIONS:               /* from WinME */
                 pr_debug("%s: OID_GEN_MAC_OPTIONS\n", __func__);
-                *outbuf = __constant_cpu_to_le32(
+                *outbuf = cpu_to_le32(
                           NDIS_MAC_OPTION_RECEIVE_SERIALIZED
                         | NDIS_MAC_OPTION_FULL_DUPLEX);
                 retval = 0;
@@ -431,7 +428,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
         case OID_802_3_MULTICAST_LIST:
                 pr_debug("%s: OID_802_3_MULTICAST_LIST\n", __func__);
                 /* Multicast base address only */
-                *outbuf = __constant_cpu_to_le32 (0xE0000000);
+                *outbuf = cpu_to_le32 (0xE0000000);
                 retval = 0;
                 break;
 
@@ -439,7 +436,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
         case OID_802_3_MAXIMUM_LIST_SIZE:
                 pr_debug("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__);
                 /* Multicast base address only */
-                *outbuf = __constant_cpu_to_le32 (1);
+                *outbuf = cpu_to_le32 (1);
                 retval = 0;
                 break;
 
@@ -461,14 +458,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
         /* mandatory */
         case OID_802_3_XMIT_ONE_COLLISION:
                 pr_debug("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__);
-                *outbuf = __constant_cpu_to_le32 (0);
+                *outbuf = cpu_to_le32 (0);
                 retval = 0;
                 break;
 
         /* mandatory */
         case OID_802_3_XMIT_MORE_COLLISIONS:
                 pr_debug("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__);
-                *outbuf = __constant_cpu_to_le32 (0);
+                *outbuf = cpu_to_le32 (0);
                 retval = 0;
                 break;
 
@@ -572,24 +569,24 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
                 return -ENOMEM;
         resp = (rndis_init_cmplt_type *) r->buf;
 
-        resp->MessageType = __constant_cpu_to_le32 (
+        resp->MessageType = cpu_to_le32 (
                         REMOTE_NDIS_INITIALIZE_CMPLT);
-        resp->MessageLength = __constant_cpu_to_le32 (52);
+        resp->MessageLength = cpu_to_le32 (52);
         resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
-        resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
-        resp->MajorVersion = __constant_cpu_to_le32 (RNDIS_MAJOR_VERSION);
-        resp->MinorVersion = __constant_cpu_to_le32 (RNDIS_MINOR_VERSION);
-        resp->DeviceFlags = __constant_cpu_to_le32 (RNDIS_DF_CONNECTIONLESS);
-        resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3);
-        resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1);
+        resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+        resp->MajorVersion = cpu_to_le32 (RNDIS_MAJOR_VERSION);
+        resp->MinorVersion = cpu_to_le32 (RNDIS_MINOR_VERSION);
+        resp->DeviceFlags = cpu_to_le32 (RNDIS_DF_CONNECTIONLESS);
+        resp->Medium = cpu_to_le32 (RNDIS_MEDIUM_802_3);
+        resp->MaxPacketsPerTransfer = cpu_to_le32 (1);
         resp->MaxTransferSize = cpu_to_le32 (
                   params->dev->mtu
                 + sizeof (struct ethhdr)
                 + sizeof (struct rndis_packet_msg_type)
                 + 22);
-        resp->PacketAlignmentFactor = __constant_cpu_to_le32 (0);
-        resp->AFListOffset = __constant_cpu_to_le32 (0);
-        resp->AFListSize = __constant_cpu_to_le32 (0);
+        resp->PacketAlignmentFactor = cpu_to_le32 (0);
+        resp->AFListOffset = cpu_to_le32 (0);
+        resp->AFListSize = cpu_to_le32 (0);
 
         params->resp_avail(params->v);
         return 0;
@@ -617,7 +614,7 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
                 return -ENOMEM;
         resp = (rndis_query_cmplt_type *) r->buf;
 
-        resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT);
+        resp->MessageType = cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT);
         resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
 
         if (gen_ndis_query_resp (configNr, le32_to_cpu (buf->OID),
@@ -626,13 +623,13 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
                         le32_to_cpu(buf->InformationBufferLength),
                         r)) {
                 /* OID not supported */
-                resp->Status = __constant_cpu_to_le32 (
+                resp->Status = cpu_to_le32 (
                                 RNDIS_STATUS_NOT_SUPPORTED);
-                resp->MessageLength = __constant_cpu_to_le32 (sizeof *resp);
-                resp->InformationBufferLength = __constant_cpu_to_le32 (0);
-                resp->InformationBufferOffset = __constant_cpu_to_le32 (0);
+                resp->MessageLength = cpu_to_le32 (sizeof *resp);
+                resp->InformationBufferLength = cpu_to_le32 (0);
+                resp->InformationBufferOffset = cpu_to_le32 (0);
         } else
-                resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+                resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
         params->resp_avail(params->v);
         return 0;
@@ -665,14 +662,14 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
         pr_debug("\n");
 #endif
 
-        resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_SET_CMPLT);
-        resp->MessageLength = __constant_cpu_to_le32 (16);
+        resp->MessageType = cpu_to_le32 (REMOTE_NDIS_SET_CMPLT);
+        resp->MessageLength = cpu_to_le32 (16);
         resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
         if (gen_ndis_set_resp (configNr, le32_to_cpu (buf->OID),
                         ((u8 *) buf) + 8 + BufOffset, BufLength, r))
-                resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED);
+                resp->Status = cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED);
         else
-                resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+                resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
         params->resp_avail(params->v);
         return 0;
@@ -689,11 +686,11 @@ static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf)
                 return -ENOMEM;
         resp = (rndis_reset_cmplt_type *) r->buf;
 
-        resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT);
-        resp->MessageLength = __constant_cpu_to_le32 (16);
-        resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+        resp->MessageType = cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT);
+        resp->MessageLength = cpu_to_le32 (16);
+        resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
         /* resent information */
-        resp->AddressingReset = __constant_cpu_to_le32 (1);
+        resp->AddressingReset = cpu_to_le32 (1);
 
         params->resp_avail(params->v);
         return 0;
@@ -713,11 +710,11 @@ static int rndis_keepalive_response (int configNr,
                 return -ENOMEM;
         resp = (rndis_keepalive_cmplt_type *) r->buf;
 
-        resp->MessageType = __constant_cpu_to_le32 (
+        resp->MessageType = cpu_to_le32 (
                         REMOTE_NDIS_KEEPALIVE_CMPLT);
-        resp->MessageLength = __constant_cpu_to_le32 (16);
+        resp->MessageLength = cpu_to_le32 (16);
         resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
-        resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+        resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS);
 
         params->resp_avail(params->v);
         return 0;
@@ -742,12 +739,12 @@ static int rndis_indicate_status_msg (int configNr, u32 status)
                 return -ENOMEM;
         resp = (rndis_indicate_status_msg_type *) r->buf;
 
-        resp->MessageType = __constant_cpu_to_le32 (
+        resp->MessageType = cpu_to_le32 (
                         REMOTE_NDIS_INDICATE_STATUS_MSG);
-        resp->MessageLength = __constant_cpu_to_le32 (20);
+        resp->MessageLength = cpu_to_le32 (20);
         resp->Status = cpu_to_le32 (status);
-        resp->StatusBufferLength = __constant_cpu_to_le32 (0);
-        resp->StatusBufferOffset = __constant_cpu_to_le32 (0);
+        resp->StatusBufferLength = cpu_to_le32 (0);
+        resp->StatusBufferOffset = cpu_to_le32 (0);
 
         params->resp_avail(params->v);
         return 0;
@@ -963,9 +960,9 @@ void rndis_add_hdr (struct sk_buff *skb)
                 return;
         header = (void *) skb_push (skb, sizeof *header);
         memset (header, 0, sizeof *header);
-        header->MessageType = __constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG);
+        header->MessageType = cpu_to_le32(REMOTE_NDIS_PACKET_MSG);
         header->MessageLength = cpu_to_le32(skb->len);
-        header->DataOffset = __constant_cpu_to_le32 (36);
+        header->DataOffset = cpu_to_le32 (36);
         header->DataLength = cpu_to_le32(skb->len - sizeof *header);
 }
 
@@ -1029,7 +1026,7 @@ int rndis_rm_hdr(struct sk_buff *skb)
         __le32          *tmp = (void *) skb->data;
 
         /* MessageType, MessageLength */
-        if (__constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
+        if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
                         != get_unaligned(tmp++))
                 return -EINVAL;
         tmp++;
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 37879af1c433..f46a60962dab 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -87,12 +87,12 @@ static struct usb_gadget_strings *dev_strings[] = {
 static struct usb_device_descriptor device_desc = {
         .bLength =              USB_DT_DEVICE_SIZE,
         .bDescriptorType =      USB_DT_DEVICE,
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         /* .bDeviceClass = f(use_acm) */
         .bDeviceSubClass =      0,
         .bDeviceProtocol =      0,
         /* .bMaxPacketSize0 = f(hardware) */
-        .idVendor =             __constant_cpu_to_le16(GS_VENDOR_ID),
+        .idVendor =             cpu_to_le16(GS_VENDOR_ID),
         /* .idProduct = f(use_acm) */
         /* .bcdDevice = f(hardware) */
         /* .iManufacturer = DYNAMIC */
@@ -216,7 +216,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
                 pr_warning("gs_bind: controller '%s' not recognized\n",
                         gadget->name);
                 device_desc.bcdDevice =
-                        __constant_cpu_to_le16(GS_VERSION_NUM | 0x0099);
+                        cpu_to_le16(GS_VERSION_NUM | 0x0099);
         }
 
         if (gadget_is_otg(cdev->gadget)) {
@@ -255,19 +255,19 @@ static int __init init(void)
                 serial_config_driver.bConfigurationValue = 2;
                 device_desc.bDeviceClass = USB_CLASS_COMM;
                 device_desc.idProduct =
-                                __constant_cpu_to_le16(GS_CDC_PRODUCT_ID);
+                                cpu_to_le16(GS_CDC_PRODUCT_ID);
         } else if (use_obex) {
                 serial_config_driver.label = "CDC OBEX config";
                 serial_config_driver.bConfigurationValue = 3;
                 device_desc.bDeviceClass = USB_CLASS_COMM;
                 device_desc.idProduct =
-                        __constant_cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
+                        cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
         } else {
                 serial_config_driver.label = "Generic Serial config";
                 serial_config_driver.bConfigurationValue = 1;
                 device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
                 device_desc.idProduct =
-                                __constant_cpu_to_le16(GS_PRODUCT_ID);
+                                cpu_to_le16(GS_PRODUCT_ID);
         }
         strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
 
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 53d59287f2bc..0a4d99ab40d8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1092,7 +1092,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
         gs_tty_driver->init_termios.c_ispeed = 9600;
         gs_tty_driver->init_termios.c_ospeed = 9600;
 
-        coding.dwDTERate = __constant_cpu_to_le32(9600);
+        coding.dwDTERate = cpu_to_le32(9600);
         coding.bCharFormat = 8;
         coding.bParityType = USB_CDC_NO_PARITY;
         coding.bDataBits = USB_CDC_1_STOP_BITS;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 361d9659ac48..2d772401b7ad 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -102,22 +102,32 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
 #ifndef CONFIG_USB_ZERO_HNPTEST
 #define DRIVER_VENDOR_NUM       0x0525          /* NetChip */
 #define DRIVER_PRODUCT_NUM      0xa4a0          /* Linux-USB "Gadget Zero" */
+#define DEFAULT_AUTORESUME      0
 #else
 #define DRIVER_VENDOR_NUM       0x1a0a          /* OTG test device IDs */
 #define DRIVER_PRODUCT_NUM      0xbadd
+#define DEFAULT_AUTORESUME      5
 #endif
 
+/* If the optional "autoresume" mode is enabled, it provides good
+ * functional coverage for the "USBCV" test harness from USB-IF.
+ * It's always set if OTG mode is enabled.
+ */
+unsigned autoresume = DEFAULT_AUTORESUME;
+module_param(autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
         .bLength =              sizeof device_desc,
         .bDescriptorType =      USB_DT_DEVICE,
 
-        .bcdUSB =               __constant_cpu_to_le16(0x0200),
+        .bcdUSB =               cpu_to_le16(0x0200),
         .bDeviceClass =         USB_CLASS_VENDOR_SPEC,
 
-        .idVendor =             __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
-        .idProduct =            __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+        .idVendor =             cpu_to_le16(DRIVER_VENDOR_NUM),
+        .idProduct =            cpu_to_le16(DRIVER_PRODUCT_NUM),
         .bNumConfigurations =   2,
 };
 
@@ -212,6 +222,47 @@ void disable_endpoints(struct usb_composite_dev *cdev,
 
 /*-------------------------------------------------------------------------*/
 
+static struct timer_list        autoresume_timer;
+
+static void zero_autoresume(unsigned long _c)
+{
+        struct usb_composite_dev        *cdev = (void *)_c;
+        struct usb_gadget               *g = cdev->gadget;
+
+        /* unconfigured devices can't issue wakeups */
+        if (!cdev->config)
+                return;
+
+        /* Normally the host would be woken up for something
+         * more significant than just a timer firing; likely
+         * because of some direct user request.
+         */
+        if (g->speed != USB_SPEED_UNKNOWN) {
+                int status = usb_gadget_wakeup(g);
+                INFO(cdev, "%s --> %d\n", __func__, status);
+        }
+}
+
+static void zero_suspend(struct usb_composite_dev *cdev)
+{
+        if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+                return;
+
+        if (autoresume) {
+                mod_timer(&autoresume_timer, jiffies + (HZ * autoresume));
+                DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+        } else
+                DBG(cdev, "%s\n", __func__);
+}
+
+static void zero_resume(struct usb_composite_dev *cdev)
+{
+        DBG(cdev, "%s\n", __func__);
+        del_timer(&autoresume_timer);
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int __init zero_bind(struct usb_composite_dev *cdev)
 {
         int                     gcnum;
@@ -239,17 +290,19 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
         strings_dev[STRING_SERIAL_IDX].id = id;
         device_desc.iSerialNumber = id;
 
+        setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
+
         /* Register primary, then secondary configuration.  Note that
          * SH3 only allows one config...
          */
         if (loopdefault) {
-                loopback_add(cdev);
+                loopback_add(cdev, autoresume != 0);
                 if (!gadget_is_sh(gadget))
-                        sourcesink_add(cdev);
+                        sourcesink_add(cdev, autoresume != 0);
         } else {
-                sourcesink_add(cdev);
+                sourcesink_add(cdev, autoresume != 0);
                 if (!gadget_is_sh(gadget))
-                        loopback_add(cdev);
+                        loopback_add(cdev, autoresume != 0);
         }
 
         gcnum = usb_gadget_controller_number(gadget);
@@ -265,7 +318,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
                  */
                 pr_warning("%s: controller '%s' not recognized\n",
                         longname, gadget->name);
-                device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+                device_desc.bcdDevice = cpu_to_le16(0x9999);
         }
 
 
@@ -278,11 +331,20 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
         return 0;
 }
 
+static int zero_unbind(struct usb_composite_dev *cdev)
+{
+        del_timer_sync(&autoresume_timer);
+        return 0;
+}
+
 static struct usb_composite_driver zero_driver = {
         .name           = "zero",
         .dev            = &device_desc,
         .strings        = dev_strings,
         .bind           = zero_bind,
+        .unbind         = zero_unbind,
+        .suspend        = zero_suspend,
+        .resume         = zero_resume,
 };
 
 MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2c63bfb1f8d9..845479f7c707 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -24,10 +24,7 @@ config USB_EHCI_HCD
           The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
           "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
           If your USB host controller supports USB 2.0, you will likely want to
-          configure this Host Controller Driver.  At the time of this writing, 
-          the primary implementation of EHCI is a chip from NEC, widely available
-          in add-on PCI cards, but implementations are in the works from other 
-          vendors including Intel and Philips.  Motherboard support is appearing.
+          configure this Host Controller Driver.
 
           EHCI controllers are packaged with "companion" host controllers (OHCI
           or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
@@ -123,7 +120,7 @@ config USB_ISP116X_HCD
 
 config USB_ISP1760_HCD
         tristate "ISP 1760 HCD support"
-        depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
+        depends on USB && EXPERIMENTAL
         ---help---
           The ISP1760 chip is a USB 2.0 host controller.
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e551bb38852b..f2618d17710d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -110,6 +110,42 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 
 /*-------------------------------------------------------------------------*/
 
+static void
+timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+        /* Don't override timeouts which shrink or (later) disable
+         * the async ring; just the I/O watchdog.  Note that if a
+         * SHRINK were pending, OFF would never be requested.
+         */
+        if (timer_pending(&ehci->watchdog)
+                        && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+                                & ehci->actions))
+                return;
+
+        if (!test_and_set_bit(action, &ehci->actions)) {
+                unsigned long t;
+
+                switch (action) {
+                case TIMER_IO_WATCHDOG:
+                        t = EHCI_IO_JIFFIES;
+                        break;
+                case TIMER_ASYNC_OFF:
+                        t = EHCI_ASYNC_JIFFIES;
+                        break;
+                /* case TIMER_ASYNC_SHRINK: */
+                default:
+                        /* add a jiffie since we synch against the
+                         * 8 KHz uframe counter.
+                         */
+                        t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
+                        break;
+                }
+                mod_timer(&ehci->watchdog, t + jiffies);
+        }
+}
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index ecc9b66c03cd..1976b1b3778c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -333,12 +333,40 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 token = hc32_to_cpu(ehci, qtd->hw_token);
 
                 /* always clean up qtds the hc de-activated */
+ retry_xacterr:
                 if ((token & QTD_STS_ACTIVE) == 0) {
 
                         /* on STALL, error, and short reads this urb must
                          * complete and all its qtds must be recycled.
                          */
                         if ((token & QTD_STS_HALT) != 0) {
+
+                                /* retry transaction errors until we
+                                 * reach the software xacterr limit
+                                 */
+                                if ((token & QTD_STS_XACT) &&
+                                                QTD_CERR(token) == 0 &&
+                                                --qh->xacterrs > 0 &&
+                                                !urb->unlinked) {
+                                        ehci_dbg(ehci,
+        "detected XactErr len %zu/%zu retry %d\n",
+        qtd->length - QTD_LENGTH(token), qtd->length,
+        QH_XACTERR_MAX - qh->xacterrs);
+
+                                        /* reset the token in the qtd and the
+                                         * qh overlay (which still contains
+                                         * the qtd) so that we pick up from
+                                         * where we left off
+                                         */
+                                        token &= ~QTD_STS_HALT;
+                                        token |= QTD_STS_ACTIVE |
+                                                        (EHCI_TUNE_CERR << 10);
+                                        qtd->hw_token = cpu_to_hc32(ehci,
+                                                        token);
+                                        wmb();
+                                        qh->hw_token = cpu_to_hc32(ehci, token);
+                                        goto retry_xacterr;
+                                }
                                 stopped = 1;
 
                         /* magic dummy for some short reads; qh won't advance.
@@ -421,6 +449,9 @@ halt:
                 /* remove qtd; it's recycled after possible urb completion */
                 list_del (&qtd->qtd_list);
                 last = qtd;
+
+                /* reinit the xacterr counter for the next qtd */
+                qh->xacterrs = QH_XACTERR_MAX;
         }
 
         /* last urb's completion might still need calling */
@@ -862,6 +893,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
         head->qh_next.qh = qh;
         head->hw_next = dma;
 
+        qh->xacterrs = QH_XACTERR_MAX;
         qh->qh_state = QH_STATE_LINKED;
         /* qtd completions reported later by interrupt */
 }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 1d0b49e3f192..ada5d2ba297b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -563,7 +563,7 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
         //   and this qh is active in the current uframe
         //   (and overlay token SplitXstate is false?)
         // THEN
-        //   qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */);
+        //   qh->hw_info1 |= cpu_to_hc32(1 << 7 /* "ignore" */);
 
         /* high bandwidth, or otherwise part of every microframe */
         if ((period = qh->period) == 0)
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 262b00c9b334..6cff195e1a36 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -190,40 +190,6 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
         clear_bit (action, &ehci->actions);
 }
 
-static inline void
-timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
-{
-        /* Don't override timeouts which shrink or (later) disable
-         * the async ring; just the I/O watchdog.  Note that if a
-         * SHRINK were pending, OFF would never be requested.
-         */
-        if (timer_pending(&ehci->watchdog)
-                        && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
-                                & ehci->actions))
-                return;
-
-        if (!test_and_set_bit (action, &ehci->actions)) {
-                unsigned long t;
-
-                switch (action) {
-                case TIMER_IO_WATCHDOG:
-                        t = EHCI_IO_JIFFIES;
-                        break;
-                case TIMER_ASYNC_OFF:
-                        t = EHCI_ASYNC_JIFFIES;
-                        break;
-                // case TIMER_ASYNC_SHRINK:
-                default:
-                        /* add a jiffie since we synch against the
-                         * 8 KHz uframe counter.
-                         */
-                        t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
-                        break;
-                }
-                mod_timer(&ehci->watchdog, t + jiffies);
-        }
-}
-
 static void free_cached_itd_list(struct ehci_hcd *ehci);
 
 /*-------------------------------------------------------------------------*/
@@ -287,7 +253,7 @@ struct ehci_qtd {
 
 /*
  * Now the following defines are not converted using the
- * __constant_cpu_to_le32() macro anymore, since we have to support
+ * cpu_to_le32() macro anymore, since we have to support
  * "dynamic" switching between be and le support, so that the driver
  * can be used on one system with SoC EHCI controller using big-endian
  * descriptors as well as a normal little-endian PCI EHCI controller.
@@ -376,6 +342,9 @@ struct ehci_qh {
 #define QH_STATE_UNLINK_WAIT    4               /* LINKED and on reclaim q */
 #define QH_STATE_COMPLETING     5               /* don't touch token.HALT */
 
+        u8                      xacterrs;       /* XactErr retry counter */
+#define QH_XACTERR_MAX          32              /* XactErr retry limit */
+
         /* periodic schedule info */
         u8                      usecs;          /* intr bandwidth */
         u8                      gap_uf;         /* uframes split/csplit gap */
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index 34e14edf390b..ea8a4255c5da 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -108,7 +108,7 @@ void fhci_dfs_create(struct fhci_hcd *fhci)
 {
         struct device *dev = fhci_to_hcd(fhci)->self.controller;
 
-        fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+        fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
         if (!fhci->dfs_root) {
                 WARN_ON(1);
                 return;
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index ba622cc8a9ba..0951818ef93b 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -583,7 +583,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev,
         if (sprop && strcmp(sprop, "host"))
                 return -ENODEV;
 
-        hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+        hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev));
         if (!hcd) {
                 dev_err(dev, "could not create hcd\n");
                 return -ENOMEM;
@@ -650,7 +650,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev,
                         }
                 }
 
-                ret = gpio_request(gpio, dev->bus_id);
+                ret = gpio_request(gpio, dev_name(dev));
                 if (ret) {
                         dev_err(dev, "failed to request gpio %d", i);
                         goto err_gpios;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 8582236e4cad..cbf30e515f29 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -464,8 +464,7 @@ static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
                         port_idx << 8 | iface_no,
                         keyd, keyd_len, 1000 /* FIXME: arbitrary */);
 
-        memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */
-        kfree(keyd);
+        kzfree(keyd); /* clear keys etc. */
         return result;
 }
 
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 4dda31b26892..a2b305477afe 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -772,7 +772,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
                 break;
         case PIPE_INTERRUPT:
                 urb->interval = ep->period;
-                ep->length = min((int)ep->maxpacket,
+                ep->length = min_t(u32, ep->maxpacket,
                                  urb->transfer_buffer_length);
 
                 /* urb submitted for already existing endpoint */
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index aa211bafcff9..12db961acdfb 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -563,7 +563,7 @@ static void urb_dbg(struct urb *urb, char *msg)
 */
 static inline void dump_ptd(struct ptd *ptd)
 {
-        printk("td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
+        printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
                PTD_GET_CC(ptd), PTD_GET_FA(ptd),
                PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
                PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
@@ -576,7 +576,7 @@ static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
         int k;
 
         if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
-                printk("-> ");
+                printk(KERN_WARNING "-> ");
                 for (k = 0; k < PTD_GET_LEN(ptd); ++k)
                         printk("%02x ", ((u8 *) buf)[k]);
                 printk("\n");
@@ -588,13 +588,13 @@ static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
         int k;
 
         if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
-                printk("<- ");
+                printk(KERN_WARNING "<- ");
                 for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
                         printk("%02x ", ((u8 *) buf)[k]);
                 printk("\n");
         }
         if (PTD_GET_LAST(ptd))
-                printk("-\n");
+                printk(KERN_WARNING "-\n");
 }
 
 #else
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index b899f1a59c26..cd07ea3f0c63 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -644,7 +644,7 @@ static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
 
         if (urb->dev->speed != USB_SPEED_HIGH) {
                 /* split */
-                ptd->dw5 = __constant_cpu_to_le32(0x1c);
+                ptd->dw5 = cpu_to_le32(0x1c);
 
                 if (qh->period >= 32)
                         period = qh->period / 2;
@@ -819,6 +819,13 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
         u32 atl_regs, payload;
         u32 buffstatus;
 
+        /*
+         * When this function is called from the interrupt handler to enqueue
+         * a follow-up packet, the SKIP register gets written and read back
+         * almost immediately. With ISP1761, this register requires a delay of
+         * 195ns between a write and subsequent read (see section 15.1.1.3).
+         */
+        ndelay(195);
         skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
 
         BUG_ON(!skip_map);
@@ -853,6 +860,13 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
         u32 int_regs, payload;
         u32 buffstatus;
 
+        /*
+         * When this function is called from the interrupt handler to enqueue
+         * a follow-up packet, the SKIP register gets written and read back
+         * almost immediately. With ISP1761, this register requires a delay of
+         * 195ns between a write and subsequent read (see section 15.1.1.3).
+         */
+        ndelay(195);
         skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
 
         BUG_ON(!skip_map);
@@ -1054,7 +1068,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
                         priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
                                         atl_regs, sizeof(ptd));
 
-                        ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID);
+                        ptd.dw0 |= cpu_to_le32(PTD_VALID);
                         priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
                                         atl_regs, sizeof(ptd));
 
@@ -2235,9 +2249,10 @@ void deinit_kmem_cache(void)
         kmem_cache_destroy(qh_cachep);
 }
 
-struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
-                u64 irqflags, struct device *dev, const char *busname,
-                unsigned int devflags)
+struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
+                                 int irq, unsigned long irqflags,
+                                 struct device *dev, const char *busname,
+                                 unsigned int devflags)
 {
         struct usb_hcd *hcd;
         struct isp1760_hcd *priv;
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index a9daea587962..462f4943cb1b 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -2,9 +2,10 @@
 #define _ISP1760_HCD_H_
 
 /* exports for if */
-struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
-                u64 irqflags, struct device *dev, const char *busname,
-                unsigned int devflags);
+struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
+                                 int irq, unsigned long irqflags,
+                                 struct device *dev, const char *busname,
+                                 unsigned int devflags);
 int init_kmem_once(void);
 void deinit_kmem_cache(void);
 
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 4cf7ca428b33..3fa3a1702796 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -10,6 +10,7 @@
 
 #include <linux/usb.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include "../core/hcd.h"
 #include "isp1760-hcd.h"
@@ -300,39 +301,101 @@ static struct pci_driver isp1761_pci_driver = {
 };
 #endif
 
+static int __devinit isp1760_plat_probe(struct platform_device *pdev)
+{
+        int ret = 0;
+        struct usb_hcd *hcd;
+        struct resource *mem_res;
+        struct resource *irq_res;
+        resource_size_t mem_size;
+        unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
+
+        mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!mem_res) {
+                pr_warning("isp1760: Memory resource not available\n");
+                ret = -ENODEV;
+                goto out;
+        }
+        mem_size = resource_size(mem_res);
+        if (!request_mem_region(mem_res->start, mem_size, "isp1760")) {
+                pr_warning("isp1760: Cannot reserve the memory resource\n");
+                ret = -EBUSY;
+                goto out;
+        }
+
+        irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (!irq_res) {
+                pr_warning("isp1760: IRQ resource not available\n");
+                return -ENODEV;
+        }
+        irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
+
+        hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
+                               irqflags, &pdev->dev, dev_name(&pdev->dev), 0);
+        if (IS_ERR(hcd)) {
+                pr_warning("isp1760: Failed to register the HCD device\n");
+                ret = -ENODEV;
+                goto cleanup;
+        }
+
+        pr_info("ISP1760 USB device initialised\n");
+        return ret;
+
+cleanup:
+        release_mem_region(mem_res->start, mem_size);
+out:
+        return ret;
+}
+
+static int __devexit isp1760_plat_remove(struct platform_device *pdev)
+{
+        struct resource *mem_res;
+        resource_size_t mem_size;
+
+        mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        mem_size = resource_size(mem_res);
+        release_mem_region(mem_res->start, mem_size);
+
+        return 0;
+}
+
+static struct platform_driver isp1760_plat_driver = {
+        .probe  = isp1760_plat_probe,
+        .remove = isp1760_plat_remove,
+        .driver = {
+                .name   = "isp1760",
+        },
+};
+
 static int __init isp1760_init(void)
 {
-        int ret;
+        int ret, any_ret = -ENODEV;
 
         init_kmem_once();
 
+        ret = platform_driver_register(&isp1760_plat_driver);
+        if (!ret)
+                any_ret = 0;
 #ifdef CONFIG_PPC_OF
         ret = of_register_platform_driver(&isp1760_of_driver);
-        if (ret) {
-                deinit_kmem_cache();
-                return ret;
-        }
+        if (!ret)
+                any_ret = 0;
 #endif
 #ifdef CONFIG_PCI
         ret = pci_register_driver(&isp1761_pci_driver);
-        if (ret)
-                goto unreg_of;
+        if (!ret)
+                any_ret = 0;
 #endif
-        return ret;
 
-#ifdef CONFIG_PCI
-unreg_of:
-#endif
-#ifdef CONFIG_PPC_OF
-        of_unregister_platform_driver(&isp1760_of_driver);
-#endif
-        deinit_kmem_cache();
-        return ret;
+        if (any_ret)
+                deinit_kmem_cache();
+        return any_ret;
 }
 module_init(isp1760_init);
 
 static void __exit isp1760_exit(void)
 {
+        platform_driver_unregister(&isp1760_plat_driver);
 #ifdef CONFIG_PPC_OF
         of_unregister_platform_driver(&isp1760_of_driver);
 #endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5cf5f1eca4f4..25db704f3a2a 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER           ohci_hcd_sa1111_driver
 #endif
 
-#ifdef CONFIG_ARCH_S3C2410
+#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER         ohci_hcd_s3c2410_driver
 #endif
@@ -1049,7 +1049,8 @@ MODULE_LICENSE ("GPL");
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763)
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7786)
 #include "ohci-sh.c"
 #define PLATFORM_DRIVER         ohci_hcd_sh_driver
 #endif
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index f46af7a718d4..a68af2dd55ca 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -21,9 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <mach/usb-control.h>
+#include <plat/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
@@ -372,7 +370,7 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 
         usb_clk = clk_get(&dev->dev, "usb-bus-host");
         if (IS_ERR(usb_clk)) {
-                dev_err(&dev->dev, "cannot get usb-host clock\n");
+                dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
                 retval = -ENOENT;
                 goto err_clk;
         }
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 75548f7c716b..5ac489ee3dab 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -845,14 +845,14 @@ static inline void qh_update(struct oxu_hcd *oxu,
                 is_out = !(qtd->hw_token & cpu_to_le32(1 << 8));
                 epnum = (le32_to_cpup(&qh->hw_info1) >> 8) & 0x0f;
                 if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) {
-                        qh->hw_token &= ~__constant_cpu_to_le32(QTD_TOGGLE);
+                        qh->hw_token &= ~cpu_to_le32(QTD_TOGGLE);
                         usb_settoggle(qh->dev, epnum, is_out, 1);
                 }
         }
 
         /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
         wmb();
-        qh->hw_token &= __constant_cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
+        qh->hw_token &= cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
 }
 
 /* If it weren't for a common silicon quirk (writing the dummy into the qh
@@ -937,7 +937,7 @@ __acquires(oxu->lock)
                 struct ehci_qh  *qh = (struct ehci_qh *) urb->hcpriv;
 
                 /* S-mask in a QH means it's an interrupt urb */
-                if ((qh->hw_info2 & __constant_cpu_to_le32(QH_SMASK)) != 0) {
+                if ((qh->hw_info2 & cpu_to_le32(QH_SMASK)) != 0) {
 
                         /* ... update hc-wide periodic stats (for usbfs) */
                         oxu_to_hcd(oxu)->self.bandwidth_int_reqs--;
@@ -981,7 +981,7 @@ static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
 static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 
-#define HALT_BIT __constant_cpu_to_le32(QTD_STS_HALT)
+#define HALT_BIT cpu_to_le32(QTD_STS_HALT)
 
 /* Process and free completed qtds for a qh, returning URBs to drivers.
  * Chases up to qh->hw_current.  Returns number of completions called,
@@ -1160,7 +1160,7 @@ halt:
                         /* should be rare for periodic transfers,
                          * except maybe high bandwidth ...
                          */
-                        if ((__constant_cpu_to_le32(QH_SMASK)
+                        if ((cpu_to_le32(QH_SMASK)
                                         & qh->hw_info2) != 0) {
                                 intr_deschedule(oxu, qh);
                                 (void) qh_schedule(oxu, qh);
@@ -1350,7 +1350,7 @@ static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu,
         }
 
         /* by default, enable interrupt on urb completion */
-                qtd->hw_token |= __constant_cpu_to_le32(QTD_IOC);
+                qtd->hw_token |= cpu_to_le32(QTD_IOC);
         return head;
 
 cleanup:
@@ -1539,7 +1539,7 @@ static void qh_link_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
         /* qtd completions reported later by interrupt */
 }
 
-#define QH_ADDR_MASK    __constant_cpu_to_le32(0x7f)
+#define QH_ADDR_MASK    cpu_to_le32(0x7f)
 
 /*
  * For control/bulk/interrupt, return QH with these TDs appended.
@@ -2012,7 +2012,7 @@ static void qh_unlink_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
          *   and this qh is active in the current uframe
          *   (and overlay token SplitXstate is false?)
          * THEN
-         *   qh->hw_info1 |= __constant_cpu_to_le32(1 << 7 "ignore");
+         *   qh->hw_info1 |= cpu_to_le32(1 << 7 "ignore");
          */
 
         /* high bandwidth, or otherwise part of every microframe */
@@ -2057,7 +2057,7 @@ static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
          * active high speed queues may need bigger delays...
          */
         if (list_empty(&qh->qtd_list)
-                || (__constant_cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
+                || (cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
                 wait = 2;
         else
                 wait = 55;      /* worst case: 3 * 1024 */
@@ -2183,10 +2183,10 @@ static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
                 qh->start = frame;
 
                 /* reset S-frame and (maybe) C-frame masks */
-                qh->hw_info2 &= __constant_cpu_to_le32(~(QH_CMASK | QH_SMASK));
+                qh->hw_info2 &= cpu_to_le32(~(QH_CMASK | QH_SMASK));
                 qh->hw_info2 |= qh->period
                         ? cpu_to_le32(1 << uframe)
-                        : __constant_cpu_to_le32(QH_SMASK);
+                        : cpu_to_le32(QH_SMASK);
                 qh->hw_info2 |= c_mask;
         } else
                 oxu_dbg(oxu, "reused qh %p schedule\n", qh);
@@ -2684,7 +2684,7 @@ static int oxu_reset(struct usb_hcd *hcd)
         oxu->urb_len = 0;
 
         /* FIMXE */
-        hcd->self.controller->dma_mask = 0UL;
+        hcd->self.controller->dma_mask = NULL;
 
         if (oxu->is_otg) {
                 oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h
index 8910e271cc7d..1c216ad9aad2 100644
--- a/drivers/usb/host/oxu210hp.h
+++ b/drivers/usb/host/oxu210hp.h
@@ -235,21 +235,21 @@ struct ehci_qtd {
 } __attribute__ ((aligned(32)));
 
 /* mask NakCnt+T in qh->hw_alt_next */
-#define QTD_MASK __constant_cpu_to_le32 (~0x1f)
+#define QTD_MASK cpu_to_le32 (~0x1f)
 
 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
 
 /* Type tag from {qh, itd, sitd, fstn}->hw_next */
-#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))
+#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
 
 /* values for that type tag */
-#define Q_TYPE_QH       __constant_cpu_to_le32 (1 << 1)
+#define Q_TYPE_QH       cpu_to_le32 (1 << 1)
 
 /* next async queue entry, or pointer to interrupt/periodic QH */
 #define QH_NEXT(dma)    (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
 
 /* for periodic/async schedules and qtd lists, mark end of list */
-#define EHCI_LIST_END   __constant_cpu_to_le32(1) /* "null pointer" to hw */
+#define EHCI_LIST_END   cpu_to_le32(1) /* "null pointer" to hw */
 
 /*
  * Entries in periodic shadow table are pointers to one of four kinds
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 75b69847918e..033c2846ce59 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -234,7 +234,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
          */
         hcc_params = readl(base + EHCI_HCC_PARAMS);
         offset = (hcc_params >> 8) & 0xff;
-        while (offset && count--) {
+        while (offset && --count) {
                 u32             cap;
                 int             msec;
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 319041205b57..f1626e58c141 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -660,9 +660,9 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
         u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
 
         memset(array, 0, sizeof(array));
-        switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+        switch (usb_endpoint_type(ep)) {
         case USB_ENDPOINT_XFER_BULK:
-                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+                if (usb_endpoint_dir_in(ep))
                         array[i++] = 4;
                 else {
                         array[i++] = 3;
@@ -670,7 +670,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
                 }
                 break;
         case USB_ENDPOINT_XFER_INT:
-                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
+                if (usb_endpoint_dir_in(ep)) {
                         array[i++] = 6;
                         array[i++] = 7;
                         array[i++] = 8;
@@ -678,7 +678,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
                         array[i++] = 9;
                 break;
         case USB_ENDPOINT_XFER_ISOC:
-                if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+                if (usb_endpoint_dir_in(ep))
                         array[i++] = 2;
                 else
                         array[i++] = 1;
@@ -928,10 +928,9 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 
         info.pipenum = get_empty_pipenum(r8a66597, ep);
         info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
-        info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+        info.epnum = usb_endpoint_num(ep);
         info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
-        info.type = get_r8a66597_type(ep->bmAttributes
-                                      & USB_ENDPOINT_XFERTYPE_MASK);
+        info.type = get_r8a66597_type(usb_endpoint_type(ep));
         info.bufnum = get_bufnum(info.pipenum);
         info.buf_bsize = get_buf_bsize(info.pipenum);
         if (info.type == R8A66597_BULK) {
@@ -941,7 +940,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
                 info.interval = get_interval(urb, ep->bInterval);
                 info.timer_interval = get_timer_interval(urb, ep->bInterval);
         }
-        if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+        if (usb_endpoint_dir_in(ep))
                 info.dir_in = 1;
         else
                 info.dir_in = 0;
@@ -1014,6 +1013,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 
         r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
         r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
+
+        if (r8a66597->bus_suspended)
+                usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
 }
 
 /* this function must be called with interrupt disabled */
@@ -1395,7 +1397,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
                            (int)urb->iso_frame_desc[td->iso_cnt].length);
         } else {
                 buf = (u16 *)(urb->transfer_buffer + urb->actual_length);
-                size = min((int)bufsize,
+                size = min_t(u32, bufsize,
                            urb->transfer_buffer_length - urb->actual_length);
         }
 
@@ -1615,6 +1617,11 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
                         r8a66597_bclr(r8a66597, DTCHE, INTENB2);
                         r8a66597_usb_disconnect(r8a66597, 1);
                 }
+                if (mask2 & BCHG) {
+                        r8a66597_write(r8a66597, ~BCHG, INTSTS2);
+                        r8a66597_bclr(r8a66597, BCHGE, INTENB2);
+                        usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+                }
         }
 
         if (mask1) {
@@ -1630,6 +1637,12 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
                         r8a66597_bclr(r8a66597, DTCHE, INTENB1);
                         r8a66597_usb_disconnect(r8a66597, 0);
                 }
+                if (mask1 & BCHG) {
+                        r8a66597_write(r8a66597, ~BCHG, INTSTS1);
+                        r8a66597_bclr(r8a66597, BCHGE, INTENB1);
+                        usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+                }
+
                 if (mask1 & SIGN) {
                         r8a66597_write(r8a66597, ~SIGN, INTSTS1);
                         status = get_urb_error(r8a66597, 0);
@@ -2141,7 +2154,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
                 switch (wValue) {
                 case USB_PORT_FEAT_ENABLE:
-                        rh->port &= (1 << USB_PORT_FEAT_POWER);
+                        rh->port &= ~(1 << USB_PORT_FEAT_POWER);
                         break;
                 case USB_PORT_FEAT_SUSPEND:
                         break;
@@ -2213,6 +2226,68 @@ error:
         return ret;
 }
 
+#if defined(CONFIG_PM)
+static int r8a66597_bus_suspend(struct usb_hcd *hcd)
+{
+        struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+        int port;
+
+        dbg("%s", __func__);
+
+        for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+                struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+                unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+                if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+                        continue;
+
+                dbg("suspend port = %d", port);
+                r8a66597_bclr(r8a66597, UACT, dvstctr_reg);     /* suspend */
+                rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+
+                if (rh->dev->udev->do_remote_wakeup) {
+                        msleep(3);      /* waiting last SOF */
+                        r8a66597_bset(r8a66597, RWUPE, dvstctr_reg);
+                        r8a66597_write(r8a66597, ~BCHG, get_intsts_reg(port));
+                        r8a66597_bset(r8a66597, BCHGE, get_intenb_reg(port));
+                }
+        }
+
+        r8a66597->bus_suspended = 1;
+
+        return 0;
+}
+
+static int r8a66597_bus_resume(struct usb_hcd *hcd)
+{
+        struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
+        int port;
+
+        dbg("%s", __func__);
+
+        for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+                struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+                unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+                if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+                        continue;
+
+                dbg("resume port = %d", port);
+                rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
+                rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
+                msleep(50);
+                r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
+        }
+
+        return 0;
+
+}
+#else
+#define r8a66597_bus_suspend    NULL
+#define r8a66597_bus_resume     NULL
+#endif
+
 static struct hc_driver r8a66597_hc_driver = {
         .description =          hcd_name,
         .hcd_priv_size =        sizeof(struct r8a66597),
@@ -2243,16 +2318,39 @@ static struct hc_driver r8a66597_hc_driver = {
          */
         .hub_status_data =      r8a66597_hub_status_data,
         .hub_control =          r8a66597_hub_control,
+        .bus_suspend =          r8a66597_bus_suspend,
+        .bus_resume =           r8a66597_bus_resume,
 };
 
 #if defined(CONFIG_PM)
 static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
 {
+        struct r8a66597         *r8a66597 = dev_get_drvdata(&pdev->dev);
+        int port;
+
+        dbg("%s", __func__);
+
+        disable_controller(r8a66597);
+
+        for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+                struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+                rh->port = 0x00000000;
+        }
+
         return 0;
 }
 
 static int r8a66597_resume(struct platform_device *pdev)
 {
+        struct r8a66597         *r8a66597 = dev_get_drvdata(&pdev->dev);
+        struct usb_hcd          *hcd = r8a66597_to_hcd(r8a66597);
+
+        dbg("%s", __func__);
+
+        enable_controller(r8a66597);
+        usb_root_hub_lost_power(hcd->self.root_hub);
+
         return 0;
 }
 #else   /* if defined(CONFIG_PM) */
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index ecacde4d69b0..f49208f1bb74 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -504,6 +504,8 @@ struct r8a66597 {
 
         struct list_head child_device;
         unsigned long child_connect_map[4];
+
+        unsigned bus_suspended:1;
 };
 
 static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index e106e9d48d4a..a949259f18b9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -230,7 +230,7 @@ static void in_packet(
         writeb(usb_pipedevice(urb->pipe), data_reg);
 
         sl811_write(sl811, bank + SL11H_HOSTCTLREG, control);
-        ep->length = min((int)len,
+        ep->length = min_t(u32, len,
                         urb->transfer_buffer_length - urb->actual_length);
         PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "",
                         !!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len);
@@ -255,7 +255,7 @@ static void out_packet(
         buf = urb->transfer_buffer + urb->actual_length;
         prefetch(buf);
 
-        len = min((int)ep->maxpacket,
+        len = min_t(u32, ep->maxpacket,
                         urb->transfer_buffer_length - urb->actual_length);
 
         if (!(control & SL11H_HCTLMASK_ISOCH)
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 20cc58b97807..e52b954dda47 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -118,7 +118,9 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space)
         }
 
         out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : ""));
-        out += sprintf(out, " Actlen=%d", urbp->urb->actual_length);
+        out += sprintf(out, " Actlen=%d%s", urbp->urb->actual_length,
+                        (urbp->qh->type == USB_ENDPOINT_XFER_CONTROL ?
+                                "-8" : ""));
 
         if (urbp->urb->unlinked)
                 out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked);
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 7d01c5677f92..26bd1b2bcbfc 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -73,11 +73,11 @@
 #define   USBLEGSUP_RWC         0x8f00  /* the R/WC bits */
 #define   USBLEGSUP_RO          0x5040  /* R/O and reserved bits */
 
-#define UHCI_PTR_BITS           __constant_cpu_to_le32(0x000F)
-#define UHCI_PTR_TERM           __constant_cpu_to_le32(0x0001)
-#define UHCI_PTR_QH             __constant_cpu_to_le32(0x0002)
-#define UHCI_PTR_DEPTH          __constant_cpu_to_le32(0x0004)
-#define UHCI_PTR_BREADTH        __constant_cpu_to_le32(0x0000)
+#define UHCI_PTR_BITS           cpu_to_le32(0x000F)
+#define UHCI_PTR_TERM           cpu_to_le32(0x0001)
+#define UHCI_PTR_QH             cpu_to_le32(0x0002)
+#define UHCI_PTR_DEPTH          cpu_to_le32(0x0004)
+#define UHCI_PTR_BREADTH        cpu_to_le32(0x0000)
 
 #define UHCI_NUMFRAMES          1024    /* in the frame list [array] */
 #define UHCI_MAX_SOF_NUMBER     2047    /* in an SOF packet */
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 5631d89c8730..3e5807d14ffb 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -402,7 +402,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
                 /* Otherwise all the toggles in the URB have to be switched */
                 } else {
                         list_for_each_entry(td, &urbp->td_list, list) {
-                                td->token ^= __constant_cpu_to_le32(
+                                td->token ^= cpu_to_le32(
                                                         TD_TOKEN_TOGGLE);
                                 toggle ^= 1;
                         }
@@ -883,7 +883,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 
         uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
         wmb();
-        qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE);
+        qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE);
         qh->dummy_td = td;
 
         /* Low-speed transfers get a different queue, and won't hog the bus.
@@ -899,8 +899,6 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
         }
         if (qh->state != QH_STATE_ACTIVE)
                 qh->skel = skel;
-
-        urb->actual_length = -8;        /* Account for the SETUP packet */
         return 0;
 
 nomem:
@@ -1003,7 +1001,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
          * fast side but not enough to justify delaying an interrupt
          * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
          * flag setting. */
-        td->status |= __constant_cpu_to_le32(TD_CTRL_IOC);
+        td->status |= cpu_to_le32(TD_CTRL_IOC);
 
         /*
          * Build the new dummy TD and activate the old one
@@ -1015,7 +1013,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 
         uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
         wmb();
-        qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE);
+        qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE);
         qh->dummy_td = td;
 
         usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
@@ -1317,7 +1315,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
         }
 
         /* Set the interrupt-on-completion flag on the last packet. */
-        td->status |= __constant_cpu_to_le32(TD_CTRL_IOC);
+        td->status |= cpu_to_le32(TD_CTRL_IOC);
 
         /* Add the TDs to the frame list */
         frame = urb->start_frame;
@@ -1494,11 +1492,10 @@ __acquires(uhci->lock)
 
         if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
 
-                /* urb->actual_length < 0 means the setup transaction didn't
-                 * complete successfully.  Either it failed or the URB was
-                 * unlinked first.  Regardless, don't confuse people with a
-                 * negative length. */
-                urb->actual_length = max(urb->actual_length, 0);
+                /* Subtract off the length of the SETUP packet from
+                 * urb->actual_length.
+                 */
+                urb->actual_length -= min_t(u32, 8, urb->actual_length);
         }
 
         /* When giving back the first URB in an Isochronous queue,
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 972f20b3406c..eca355dccf65 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -188,7 +188,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
                 .bDescriptorType =      0,
                 .bEndpointAddress =     0x01,
                 .bmAttributes =         0x02,
-                .wMaxPacketSize =       __constant_cpu_to_le16(8),
+                .wMaxPacketSize =       cpu_to_le16(8),
                 .bInterval =            0,
                 .bRefresh =             0,
                 .bSynchAddress =        0,
@@ -198,7 +198,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
                 .bDescriptorType =      0,
                 .bEndpointAddress =     0x82,
                 .bmAttributes =         0x03,
-                .wMaxPacketSize =       __constant_cpu_to_le16(8),
+                .wMaxPacketSize =       cpu_to_le16(8),
                 .bInterval =            0,
                 .bRefresh =             0,
                 .bSynchAddress =        0,
@@ -208,7 +208,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
                 .bDescriptorType =      0,
                 .bEndpointAddress =     0x03,
                 .bmAttributes =         0x02,
-                .wMaxPacketSize =       __constant_cpu_to_le16(64),
+                .wMaxPacketSize =       cpu_to_le16(64),
                 .bInterval =            0,
                 .bRefresh =             0,
                 .bSynchAddress =        0,
@@ -218,7 +218,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] =
                 .bDescriptorType =      0,
                 .bEndpointAddress =     0x84,
                 .bmAttributes =         0x02,
-                .wMaxPacketSize =       __constant_cpu_to_le16(64),
+                .wMaxPacketSize =       cpu_to_le16(64),
                 .bInterval =            0,
                 .bRefresh =             0,
                 .bSynchAddress =        0,
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index e463db5d8188..a68d91a11bee 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -135,45 +135,6 @@ config USB_CYTHERM
           To compile this driver as a module, choose M here: the
           module will be called cytherm.
 
-config USB_PHIDGET
-        tristate "USB Phidgets drivers"
-        depends on USB
-        help
-          Say Y here to enable the various drivers for devices from
-          Phidgets inc.
-
-config USB_PHIDGETKIT
-        tristate "USB PhidgetInterfaceKit support"
-        depends on USB_PHIDGET
-        help
-          Say Y here if you want to connect a PhidgetInterfaceKit USB device
-          from Phidgets Inc.
-
-          To compile this driver as a module, choose M here: the
-          module will be called phidgetkit.
-
-config USB_PHIDGETMOTORCONTROL
-        tristate "USB PhidgetMotorControl support"
-        depends on USB_PHIDGET
-        help
-          Say Y here if you want to connect a PhidgetMotorControl USB device
-          from Phidgets Inc.
-
-          To compile this driver as a module, choose M here: the
-          module will be called phidgetmotorcontrol.
-
-config USB_PHIDGETSERVO
-        tristate "USB PhidgetServo support"
-        depends on USB_PHIDGET
-        help
-          Say Y here if you want to connect an 1 or 4 Motor PhidgetServo 
-          servo controller version 2.0 or 3.0.
-
-          Phidgets Inc. has a web page at <http://www.phidgets.com/>.
-
-          To compile this driver as a module, choose M here: the
-          module will be called phidgetservo.
-
 config USB_IDMOUSE
         tristate "Siemens ID USB Mouse Fingerprint sensor support"
         depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 1334f7bdd7be..0826aab8303f 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -18,10 +18,6 @@ obj-$(CONFIG_USB_LCD)		+= usblcd.o
 obj-$(CONFIG_USB_LD)            += ldusb.o
 obj-$(CONFIG_USB_LED)           += usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)     += legousbtower.o
-obj-$(CONFIG_USB_PHIDGET)       += phidget.o
-obj-$(CONFIG_USB_PHIDGETKIT)    += phidgetkit.o
-obj-$(CONFIG_USB_PHIDGETMOTORCONTROL)   += phidgetmotorcontrol.o
-obj-$(CONFIG_USB_PHIDGETSERVO)  += phidgetservo.o
 obj-$(CONFIG_USB_RIO500)        += rio500.o
 obj-$(CONFIG_USB_TEST)          += usbtest.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)        += trancevibrator.o
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 79a7668ef264..9d0675ed0d4c 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -1568,7 +1568,7 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
                         struct u132_target *target = &ftdi->target[ed];
                         struct u132_command *command = &ftdi->command[
                                 COMMAND_MASK & ftdi->command_next];
-                        int remaining_length = urb->transfer_buffer_length -
+                        u32 remaining_length = urb->transfer_buffer_length -
                                 urb->actual_length;
                         command->header = 0x82 | (ed << 5);
                         if (remaining_length == 0) {
@@ -1702,7 +1702,7 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
                                 | (address << 0);
                         command->width = usb_maxpacket(urb->dev, urb->pipe,
                                 usb_pipeout(urb->pipe));
-                        command->follows = min(1024,
+                        command->follows = min_t(u32, 1024,
                                 urb->transfer_buffer_length -
                                 urb->actual_length);
                         command->value = 0;
@@ -1766,7 +1766,7 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
                 mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
-                        int remaining_length = urb->transfer_buffer_length -
+                        u32 remaining_length = urb->transfer_buffer_length -
                                 urb->actual_length;
                         struct u132_target *target = &ftdi->target[ed];
                         struct u132_command *command = &ftdi->command[
diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c
deleted file mode 100644
index 735ed33f4f7f..000000000000
--- a/drivers/usb/misc/phidget.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * USB Phidgets class
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/device.h>
-
-struct class *phidget_class;
-
-static int __init init_phidget(void)
-{
-        phidget_class = class_create(THIS_MODULE, "phidget");
-
-        if (IS_ERR(phidget_class))
-                return PTR_ERR(phidget_class);
-
-        return 0;
-}
-
-static void __exit cleanup_phidget(void)
-{
-        class_destroy(phidget_class);
-}
-
-EXPORT_SYMBOL_GPL(phidget_class);
-
-module_init(init_phidget);
-module_exit(cleanup_phidget);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sean Young <sean@mess.org>");
-MODULE_DESCRIPTION("Container module for phidget class");
-
diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h
deleted file mode 100644
index c4011907d431..000000000000
--- a/drivers/usb/misc/phidget.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * USB Phidgets class
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-extern struct class *phidget_class;
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
deleted file mode 100644
index cc8e0a926f99..000000000000
--- a/drivers/usb/misc/phidgetkit.c
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * USB PhidgetInterfaceKit driver 1.0
- *
- * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
- * Copyright (C) 2005 Daniel Saakes <daniel@saakes.net>
- * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is a driver for the USB PhidgetInterfaceKit.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetInterfaceKit Driver"
-
-#define USB_VENDOR_ID_GLAB              0x06c2
-#define USB_DEVICE_ID_INTERFACEKIT004   0x0040
-#define USB_DEVICE_ID_INTERFACEKIT01616 0x0044
-#define USB_DEVICE_ID_INTERFACEKIT888   0x0045
-#define USB_DEVICE_ID_INTERFACEKIT047   0x0051
-#define USB_DEVICE_ID_INTERFACEKIT088   0x0053
-
-#define USB_VENDOR_ID_WISEGROUP         0x0925
-#define USB_DEVICE_ID_INTERFACEKIT884   0x8201
-
-#define MAX_INTERFACES                  16
-
-#define URB_INT_SIZE                    8
-
-struct driver_interfacekit {
-        int sensors;
-        int inputs;
-        int outputs;
-        int has_lcd;
-        int amnesiac;
-};
-
-#define ifkit(_sensors, _inputs, _outputs, _lcd, _amnesiac)             \
-{                                                                       \
-        .sensors        = _sensors,                                     \
-        .inputs         = _inputs,                                      \
-        .outputs        = _outputs,                                     \
-        .has_lcd        = _lcd,                                         \
-        .amnesiac       = _amnesiac                                     \
-};
-
-static const struct driver_interfacekit ph_004 = ifkit(0, 0, 4, 0, 0);
-static const struct driver_interfacekit ph_888n = ifkit(8, 8, 8, 0, 1);
-static const struct driver_interfacekit ph_888o = ifkit(8, 8, 8, 0, 0);
-static const struct driver_interfacekit ph_047 = ifkit(0, 4, 7, 1, 0);
-static const struct driver_interfacekit ph_884 = ifkit(8, 8, 4, 0, 0);
-static const struct driver_interfacekit ph_088 = ifkit(0, 8, 8, 1, 0);
-static const struct driver_interfacekit ph_01616 = ifkit(0, 16, 16, 0, 0);
-
-static unsigned long device_no;
-
-struct interfacekit {
-        struct usb_device *udev;
-        struct usb_interface *intf;
-        struct driver_interfacekit *ifkit;
-        struct device *dev;
-        unsigned long outputs;
-        int dev_no;
-        u8 inputs[MAX_INTERFACES];
-        u16 sensors[MAX_INTERFACES];
-        u8 lcd_files_on;
-
-        struct urb *irq;
-        unsigned char *data;
-        dma_addr_t data_dma;
-
-        struct delayed_work do_notify;
-        struct delayed_work do_resubmit;
-        unsigned long input_events;
-        unsigned long sensor_events;
-};
-
-static struct usb_device_id id_table[] = {
-        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004),
-                .driver_info = (kernel_ulong_t)&ph_004},
-        {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0, 0x814),
-                .driver_info = (kernel_ulong_t)&ph_888o},
-        {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0x0815, 0xffff),
-                .driver_info = (kernel_ulong_t)&ph_888n},
-        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047),
-                .driver_info = (kernel_ulong_t)&ph_047},
-        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088),
-                .driver_info = (kernel_ulong_t)&ph_088},
-        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT01616),
-                .driver_info = (kernel_ulong_t)&ph_01616},
-        {USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884),
-                .driver_info = (kernel_ulong_t)&ph_884},
-        {}
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int set_outputs(struct interfacekit *kit)
-{
-        u8 *buffer;
-        int retval;
-
-        buffer = kzalloc(4, GFP_KERNEL);
-        if (!buffer) {
-                dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-                return -ENOMEM;
-        }
-        buffer[0] = (u8)kit->outputs;
-        buffer[1] = (u8)(kit->outputs >> 8);
-
-        dev_dbg(&kit->udev->dev, "sending data: 0x%04x\n", (u16)kit->outputs);
-
-        retval = usb_control_msg(kit->udev,
-                         usb_sndctrlpipe(kit->udev, 0),
-                         0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000);
-
-        if (retval != 4)
-                dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", 
-                                retval);
-        kfree(buffer);
-
-        if (kit->ifkit->amnesiac)
-                schedule_delayed_work(&kit->do_resubmit, HZ / 2);
-
-        return retval < 0 ? retval : 0;
-}
-
-static int change_string(struct interfacekit *kit, const char *display, unsigned char row)
-{
-        unsigned char *buffer;
-        unsigned char *form_buffer;
-        int retval = -ENOMEM;
-        int i,j, len, buf_ptr;
-        
-        buffer = kmalloc(8, GFP_KERNEL);
-        form_buffer = kmalloc(30, GFP_KERNEL);
-        if ((!buffer) || (!form_buffer)) {
-                dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-                goto exit;
-        }
-
-        len = strlen(display);
-        if (len > 20)
-                len = 20;
-
-        dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display);
-
-        form_buffer[0] = row * 0x40 + 0x80;
-        form_buffer[1] = 0x02;
-        buf_ptr = 2;
-        for (i = 0; i<len; i++)
-                form_buffer[buf_ptr++] = display[i];
-
-        for (i = 0; i < (20 - len); i++)
-                form_buffer[buf_ptr++] = 0x20;
-        form_buffer[buf_ptr++] = 0x01;
-        form_buffer[buf_ptr++] = row * 0x40 + 0x80 + strlen(display);
-
-        for (i = 0; i < buf_ptr; i += 7) {
-                if ((buf_ptr - i) > 7)
-                        len = 7;
-                else
-                        len = (buf_ptr - i);
-                for (j = 0; j < len; j++)
-                        buffer[j] = form_buffer[i + j];
-                buffer[7] = len;
-
-                retval = usb_control_msg(kit->udev,
-                                 usb_sndctrlpipe(kit->udev, 0),
-                                 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-                if (retval < 0)
-                        goto exit;
-        }
-
-        retval = 0;
-exit:
-        kfree(buffer);
-        kfree(form_buffer);
-
-        return retval;
-}
-
-#define set_lcd_line(number)    \
-static ssize_t lcd_line_##number(struct device *dev,                    \
-                                        struct device_attribute *attr,  \
-                                        const char *buf, size_t count)  \
-{                                                                       \
-        struct interfacekit *kit = dev_get_drvdata(dev);                \
-        change_string(kit, buf, number - 1);                            \
-        return count;                                                   \
-}
-
-#define lcd_line_attr(number)                                           \
-        __ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number)
-
-set_lcd_line(1);
-set_lcd_line(2);
-
-static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-        struct interfacekit *kit = dev_get_drvdata(dev);
-        int enabled;
-        unsigned char *buffer;
-        int retval = -ENOMEM;
-        
-        buffer = kzalloc(8, GFP_KERNEL);
-        if (!buffer) {
-                dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
-                goto exit;
-        }
-
-        if (sscanf(buf, "%d", &enabled) < 1) {
-                retval = -EINVAL;
-                goto exit;
-        }
-        if (enabled)
-                buffer[0] = 0x01;
-        buffer[7] = 0x11;
-
-        dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off");
-        
-        retval = usb_control_msg(kit->udev,
-                         usb_sndctrlpipe(kit->udev, 0),
-                         0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-        if (retval < 0)
-                goto exit;
-
-        retval = count;
-exit:
-        kfree(buffer);
-        return retval;
-}
-
-static struct device_attribute dev_lcd_line_attrs[] = {
-        lcd_line_attr(1),
-        lcd_line_attr(2),
-        __ATTR(backlight, S_IWUGO, NULL, set_backlight)
-};
-
-static void remove_lcd_files(struct interfacekit *kit)
-{
-        int i;
-
-        if (kit->lcd_files_on) {
-                dev_dbg(&kit->udev->dev, "Removing lcd files\n");
-
-                for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++)
-                        device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
-        }
-}
-
-static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-        struct interfacekit *kit = dev_get_drvdata(dev);
-        int enable;
-        int i, rc;
-        
-        if (kit->ifkit->has_lcd == 0)
-                return -ENODEV;
-
-        if (sscanf(buf, "%d", &enable) < 1)
-                return -EINVAL;
-
-        if (enable) {
-                if (!kit->lcd_files_on) {
-                        dev_dbg(&kit->udev->dev, "Adding lcd files\n");
-                        for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++) {
-                                rc = device_create_file(kit->dev,
-                                        &dev_lcd_line_attrs[i]);
-                                if (rc)
-                                        goto out;
-                        }
-                        kit->lcd_files_on = 1;
-                }
-        } else {
-                if (kit->lcd_files_on) {
-                        remove_lcd_files(kit);
-                        kit->lcd_files_on = 0;
-                }
-        }
-        
-        return count;
-out:
-        while (i-- > 0)
-                device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
-
-        return rc;
-}
-
-static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files);
-
-static void interfacekit_irq(struct urb *urb)
-{
-        struct interfacekit *kit = urb->context;
-        unsigned char *buffer = kit->data;
-        int i, level, sensor;
-        int retval;
-        int status = urb->status;
-
-        switch (status) {
-        case 0:                 /* success */
-                break;
-        case -ECONNRESET:       /* unlink */
-        case -ENOENT:
-        case -ESHUTDOWN:
-                return;
-        /* -EPIPE:  should clear the halt */
-        default:                /* error */
-                goto resubmit;
-        }
-
-        /* digital inputs */
-        if (kit->ifkit->inputs == 16) {
-                for (i=0; i < 8; i++) {
-                        level = (buffer[0] >> i) & 1;
-                        if (kit->inputs[i] != level) {
-                                kit->inputs[i] = level;
-                                set_bit(i, &kit->input_events);
-                        }
-                        level = (buffer[1] >> i) & 1;
-                        if (kit->inputs[8 + i] != level) {
-                                kit->inputs[8 + i] = level;
-                                set_bit(8 + i, &kit->input_events);
-                        }
-                }
-        }
-        else if (kit->ifkit->inputs == 8) {
-                for (i=0; i < 8; i++) {
-                        level = (buffer[1] >> i) & 1;
-                        if (kit->inputs[i] != level) {
-                                kit->inputs[i] = level;
-                                set_bit(i, &kit->input_events);
-                        }
-                }
-        }
-
-        /* analog inputs */
-        if (kit->ifkit->sensors) {
-                sensor = (buffer[0] & 1) ? 4 : 0;
-
-                level = buffer[2] + (buffer[3] & 0x0f) * 256;
-                if (level != kit->sensors[sensor]) {
-                        kit->sensors[sensor] = level;
-                        set_bit(sensor, &kit->sensor_events);
-                }
-                sensor++;
-                level = buffer[4] + (buffer[3] & 0xf0) * 16;
-                if (level != kit->sensors[sensor]) {
-                        kit->sensors[sensor] = level;
-                        set_bit(sensor, &kit->sensor_events);
-                }
-                sensor++;
-                level = buffer[5] + (buffer[6] & 0x0f) * 256;
-                if (level != kit->sensors[sensor]) {
-                        kit->sensors[sensor] = level;
-                        set_bit(sensor, &kit->sensor_events);
-                }
-                sensor++;
-                level = buffer[7] + (buffer[6] & 0xf0) * 16;
-                if (level != kit->sensors[sensor]) {
-                        kit->sensors[sensor] = level;
-                        set_bit(sensor, &kit->sensor_events);
-                }
-        }
-
-        if (kit->input_events || kit->sensor_events)
-                schedule_delayed_work(&kit->do_notify, 0);
-
-resubmit:
-        retval = usb_submit_urb(urb, GFP_ATOMIC);
-        if (retval)
-                err("can't resubmit intr, %s-%s/interfacekit0, retval %d",
-                        kit->udev->bus->bus_name,
-                        kit->udev->devpath, retval);
-}
-
-static void do_notify(struct work_struct *work)
-{
-        struct interfacekit *kit =
-                container_of(work, struct interfacekit, do_notify.work);
-        int i;
-        char sysfs_file[8];
-
-        for (i=0; i<kit->ifkit->inputs; i++) {
-                if (test_and_clear_bit(i, &kit->input_events)) {
-                        sprintf(sysfs_file, "input%d", i + 1);
-                        sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
-                }
-        }
-
-        for (i=0; i<kit->ifkit->sensors; i++) {
-                if (test_and_clear_bit(i, &kit->sensor_events)) {
-                        sprintf(sysfs_file, "sensor%d", i + 1);
-                        sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
-                }
-        }
-}
-
-static void do_resubmit(struct work_struct *work)
-{
-        struct interfacekit *kit =
-                container_of(work, struct interfacekit, do_resubmit.work);
-        set_outputs(kit);
-}
-
-#define show_set_output(value)          \
-static ssize_t set_output##value(struct device *dev,                    \
-                                        struct device_attribute *attr,  \
-                                        const char *buf, size_t count)  \
-{                                                                       \
-        struct interfacekit *kit = dev_get_drvdata(dev);                \
-        int enable;                                                     \
-        int retval;                                                     \
-                                                                        \
-        if (sscanf(buf, "%d", &enable) < 1)                             \
-                return -EINVAL;                                         \
-                                                                        \
-        if (enable)                                                     \
-                set_bit(value - 1, &kit->outputs);                      \
-        else                                                            \
-                clear_bit(value - 1, &kit->outputs);                    \
-                                                                        \
-        retval = set_outputs(kit);                                      \
-                                                                        \
-        return retval ? retval : count;                                 \
-}                                                                       \
-                                                                        \
-static ssize_t show_output##value(struct device *dev,                   \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct interfacekit *kit = dev_get_drvdata(dev);                \
-                                                                        \
-        return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\
-}
-
-#define output_attr(value)                                              \
-        __ATTR(output##value, S_IWUGO | S_IRUGO,                        \
-                show_output##value, set_output##value)
-
-show_set_output(1);
-show_set_output(2);
-show_set_output(3);
-show_set_output(4);
-show_set_output(5);
-show_set_output(6);
-show_set_output(7);
-show_set_output(8);
-show_set_output(9);
-show_set_output(10);
-show_set_output(11);
-show_set_output(12);
-show_set_output(13);
-show_set_output(14);
-show_set_output(15);
-show_set_output(16);
-
-static struct device_attribute dev_output_attrs[] = {
-        output_attr(1), output_attr(2), output_attr(3), output_attr(4),
-        output_attr(5), output_attr(6), output_attr(7), output_attr(8),
-        output_attr(9), output_attr(10), output_attr(11), output_attr(12),
-        output_attr(13), output_attr(14), output_attr(15), output_attr(16)
-};
-
-#define show_input(value)       \
-static ssize_t show_input##value(struct device *dev,                    \
-                        struct device_attribute *attr, char *buf)       \
-{                                                                       \
-        struct interfacekit *kit = dev_get_drvdata(dev);                \
-                                                                        \
-        return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]);       \
-}
-
-#define input_attr(value)                                               \
-        __ATTR(input##value, S_IRUGO, show_input##value, NULL)
-
-show_input(1);
-show_input(2);
-show_input(3);
-show_input(4);
-show_input(5);
-show_input(6);
-show_input(7);
-show_input(8);
-show_input(9);
-show_input(10);
-show_input(11);
-show_input(12);
-show_input(13);
-show_input(14);
-show_input(15);
-show_input(16);
-
-static struct device_attribute dev_input_attrs[] = {
-        input_attr(1), input_attr(2), input_attr(3), input_attr(4),
-        input_attr(5), input_attr(6), input_attr(7), input_attr(8),
-        input_attr(9), input_attr(10), input_attr(11), input_attr(12),
-        input_attr(13), input_attr(14), input_attr(15), input_attr(16)
-};
-
-#define show_sensor(value)      \
-static ssize_t show_sensor##value(struct device *dev,                   \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct interfacekit *kit = dev_get_drvdata(dev);                \
-                                                                        \
-        return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]);      \
-}
-
-#define sensor_attr(value)                                              \
-        __ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL)
-
-show_sensor(1);
-show_sensor(2);
-show_sensor(3);
-show_sensor(4);
-show_sensor(5);
-show_sensor(6);
-show_sensor(7);
-show_sensor(8);
-
-static struct device_attribute dev_sensor_attrs[] = {
-        sensor_attr(1), sensor_attr(2), sensor_attr(3), sensor_attr(4),
-        sensor_attr(5), sensor_attr(6), sensor_attr(7), sensor_attr(8)
-};
-
-static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-        struct usb_device *dev = interface_to_usbdev(intf);
-        struct usb_host_interface *interface;
-        struct usb_endpoint_descriptor *endpoint;
-        struct interfacekit *kit;
-        struct driver_interfacekit *ifkit;
-        int pipe, maxp, rc = -ENOMEM;
-        int bit, value, i;
-
-        ifkit = (struct driver_interfacekit *)id->driver_info;
-        if (!ifkit)
-                return -ENODEV;
-
-        interface = intf->cur_altsetting;
-        if (interface->desc.bNumEndpoints != 1)
-                return -ENODEV;
-
-        endpoint = &interface->endpoint[0].desc;
-        if (!usb_endpoint_dir_in(endpoint))
-                return -ENODEV;
-        /*
-         * bmAttributes
-         */
-        pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-        maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-        
-        kit = kzalloc(sizeof(*kit), GFP_KERNEL);
-        if (!kit)
-                goto out;
-
-        kit->dev_no = -1;
-        kit->ifkit = ifkit;
-        kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &kit->data_dma);
-        if (!kit->data)
-                goto out;
-
-        kit->irq = usb_alloc_urb(0, GFP_KERNEL);
-        if (!kit->irq)
-                goto out;
-
-        kit->udev = usb_get_dev(dev);
-        kit->intf = intf;
-        INIT_DELAYED_WORK(&kit->do_notify, do_notify);
-        INIT_DELAYED_WORK(&kit->do_resubmit, do_resubmit);
-        usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data,
-                        maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
-                        interfacekit_irq, kit, endpoint->bInterval);
-        kit->irq->transfer_dma = kit->data_dma;
-        kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-        usb_set_intfdata(intf, kit);
-
-        do {
-                bit = find_first_zero_bit(&device_no, sizeof(device_no));
-                value = test_and_set_bit(bit, &device_no);
-        } while(value);
-        kit->dev_no = bit;
-
-        kit->dev = device_create(phidget_class, &kit->udev->dev, MKDEV(0, 0),
-                                 kit, "interfacekit%d", kit->dev_no);
-        if (IS_ERR(kit->dev)) {
-                rc = PTR_ERR(kit->dev);
-                kit->dev = NULL;
-                goto out;
-        }
-
-        if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
-                rc = -EIO;
-                goto out;
-        }
-
-        for (i=0; i<ifkit->outputs; i++ ) {
-                rc = device_create_file(kit->dev, &dev_output_attrs[i]);
-                if (rc)
-                        goto out2;
-        }
-
-        for (i=0; i<ifkit->inputs; i++ ) {
-                rc = device_create_file(kit->dev, &dev_input_attrs[i]);
-                if (rc)
-                        goto out3;
-        }
-
-        for (i=0; i<ifkit->sensors; i++ ) {
-                rc = device_create_file(kit->dev, &dev_sensor_attrs[i]);
-                if (rc)
-                        goto out4;
-        }
-
-        if (ifkit->has_lcd) {
-                rc = device_create_file(kit->dev, &dev_attr_lcd);
-                if (rc)
-                        goto out4;
-
-        }
-
-        dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n",
-                        ifkit->sensors, ifkit->inputs, ifkit->outputs);
-
-        return 0;
-
-out4:
-        while (i-- > 0)
-                device_remove_file(kit->dev, &dev_sensor_attrs[i]);
-
-        i = ifkit->inputs;
-out3:
-        while (i-- > 0)
-                device_remove_file(kit->dev, &dev_input_attrs[i]);
-
-        i = ifkit->outputs;
-out2:
-        while (i-- > 0)
-                device_remove_file(kit->dev, &dev_output_attrs[i]);
-out:
-        if (kit) {
-                usb_free_urb(kit->irq);
-                if (kit->data)
-                        usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
-                if (kit->dev)
-                        device_unregister(kit->dev);
-                if (kit->dev_no >= 0)
-                        clear_bit(kit->dev_no, &device_no);
-
-                kfree(kit);
-        }
-
-        return rc;
-}
-
-static void interfacekit_disconnect(struct usb_interface *interface)
-{
-        struct interfacekit *kit;
-        int i;
-
-        kit = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
-        if (!kit)
-                return;
-
-        usb_kill_urb(kit->irq);
-        usb_free_urb(kit->irq);
-        usb_buffer_free(kit->udev, URB_INT_SIZE, kit->data, kit->data_dma);
-
-        cancel_delayed_work(&kit->do_notify);
-        cancel_delayed_work(&kit->do_resubmit);
-
-        for (i=0; i<kit->ifkit->outputs; i++)
-                device_remove_file(kit->dev, &dev_output_attrs[i]);
-
-        for (i=0; i<kit->ifkit->inputs; i++)
-                device_remove_file(kit->dev, &dev_input_attrs[i]);
-
-        for (i=0; i<kit->ifkit->sensors; i++)
-                device_remove_file(kit->dev, &dev_sensor_attrs[i]);
-
-        if (kit->ifkit->has_lcd) {
-                device_remove_file(kit->dev, &dev_attr_lcd);
-                remove_lcd_files(kit);
-        }
-
-        device_unregister(kit->dev);
-
-        dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n",
-                kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs);
-
-        usb_put_dev(kit->udev);
-        clear_bit(kit->dev_no, &device_no);
-
-        kfree(kit);
-}
-
-static struct usb_driver interfacekit_driver = {
-        .name = "phidgetkit",
-        .probe = interfacekit_probe,
-        .disconnect = interfacekit_disconnect,
-        .id_table = id_table
-};
-
-static int __init interfacekit_init(void)
-{
-        int retval = 0;
-
-        retval = usb_register(&interfacekit_driver);
-        if (retval)
-                err("usb_register failed. Error number %d", retval);
-
-        return retval;
-}
-
-static void __exit interfacekit_exit(void)
-{
-        usb_deregister(&interfacekit_driver);
-}
-
-module_init(interfacekit_init);
-module_exit(interfacekit_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
deleted file mode 100644
index 38088b44349e..000000000000
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * USB Phidget MotorControl driver
- *
- * Copyright (C) 2006  Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetMotorControl Driver"
-
-#define USB_VENDOR_ID_GLAB              0x06c2
-#define USB_DEVICE_ID_MOTORCONTROL      0x0058
-
-#define URB_INT_SIZE                    8
-
-static unsigned long device_no;
-
-struct motorcontrol {
-        struct usb_device *udev;
-        struct usb_interface *intf;
-        struct device *dev;
-        int dev_no;
-        u8 inputs[4];
-        s8 desired_speed[2];
-        s8 speed[2];
-        s16 _current[2];
-        s8 acceleration[2];
-        struct urb *irq;
-        unsigned char *data;
-        dma_addr_t data_dma;
-
-        struct delayed_work do_notify;
-        unsigned long input_events;
-        unsigned long speed_events;
-        unsigned long exceed_events;
-};
-
-static struct usb_device_id id_table[] = {
-        { USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_MOTORCONTROL) },
-        {}
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int set_motor(struct motorcontrol *mc, int motor)
-{
-        u8 *buffer;
-        int speed, speed2, acceleration;
-        int retval;
-
-        buffer = kzalloc(8, GFP_KERNEL);
-        if (!buffer) {
-                dev_err(&mc->intf->dev, "%s - out of memory\n", __func__);
-                return -ENOMEM;
-        }
-
-        acceleration = mc->acceleration[motor] * 10;
-        /* -127 <= speed <= 127 */
-        speed = (mc->desired_speed[motor] * 127) / 100;
-        /* -0x7300 <= speed2 <= 0x7300 */
-        speed2 = (mc->desired_speed[motor] * 230 * 128) / 100;
-
-        buffer[0] = motor;
-        buffer[1] = speed;
-        buffer[2] = acceleration >> 8;
-        buffer[3] = acceleration;
-        buffer[4] = speed2 >> 8;
-        buffer[5] = speed2;
-
-        retval = usb_control_msg(mc->udev,
-                         usb_sndctrlpipe(mc->udev, 0),
-                         0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
-
-        if (retval != 8)
-                dev_err(&mc->intf->dev, "usb_control_msg returned %d\n",
-                                retval);
-        kfree(buffer);
-
-        return retval < 0 ? retval : 0;
-}
-
-static void motorcontrol_irq(struct urb *urb)
-{
-        struct motorcontrol *mc = urb->context;
-        unsigned char *buffer = mc->data;
-        int i, level;
-        int retval;
-        int status = urb->status;;
-
-        switch (status) {
-        case 0:                 /* success */
-                break;
-        case -ECONNRESET:       /* unlink */
-        case -ENOENT:
-        case -ESHUTDOWN:
-                return;
-        /* -EPIPE:  should clear the halt */
-        default:                /* error */
-                goto resubmit;
-        }
-
-        /* digital inputs */
-        for (i=0; i<4; i++) {
-                level = (buffer[0] >> i) & 1;
-                if (mc->inputs[i] != level) {
-                        mc->inputs[i] = level;
-                        set_bit(i, &mc->input_events);
-                }
-        }
-
-        /* motor speed */
-        if (buffer[2] == 0) {
-                for (i=0; i<2; i++) {
-                level = ((s8)buffer[4+i]) * 100 / 127;
-                        if (mc->speed[i] != level) {
-                                mc->speed[i] = level;
-                                set_bit(i, &mc->speed_events);
-                        }
-                }
-        } else {
-                int index = buffer[3] & 1;
-
-                level = ((s8)buffer[4] << 8) | buffer[5];
-                level = level * 100 / 29440;
-                if (mc->speed[index] != level) {
-                        mc->speed[index] = level;
-                        set_bit(index, &mc->speed_events);
-                }
-
-                level = ((s8)buffer[6] << 8) | buffer[7];
-                mc->_current[index] = level * 100 / 1572;
-        }
-
-        if (buffer[1] & 1)
-                set_bit(0, &mc->exceed_events);
-
-        if (buffer[1] & 2)
-                set_bit(1, &mc->exceed_events);
-
-        if (mc->input_events || mc->exceed_events || mc->speed_events)
-                schedule_delayed_work(&mc->do_notify, 0);
-
-resubmit:
-        retval = usb_submit_urb(urb, GFP_ATOMIC);
-        if (retval)
-                dev_err(&mc->intf->dev,
-                        "can't resubmit intr, %s-%s/motorcontrol0, retval %d\n",
-                        mc->udev->bus->bus_name,
-                        mc->udev->devpath, retval);
-}
-
-static void do_notify(struct work_struct *work)
-{
-        struct motorcontrol *mc =
-                container_of(work, struct motorcontrol, do_notify.work);
-        int i;
-        char sysfs_file[8];
-
-        for (i=0; i<4; i++) {
-                if (test_and_clear_bit(i, &mc->input_events)) {
-                        sprintf(sysfs_file, "input%d", i);
-                        sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
-                }
-        }
-
-        for (i=0; i<2; i++) {
-                if (test_and_clear_bit(i, &mc->speed_events)) {
-                        sprintf(sysfs_file, "speed%d", i);
-                        sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
-                }
-        }
-
-        for (i=0; i<2; i++) {
-                if (test_and_clear_bit(i, &mc->exceed_events))
-                        dev_warn(&mc->intf->dev,
-                                "motor #%d exceeds 1.5 Amp current limit\n", i);
-        }
-}
-
-#define show_set_speed(value)           \
-static ssize_t set_speed##value(struct device *dev,                     \
-                                        struct device_attribute *attr,  \
-                                        const char *buf, size_t count)  \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-        int speed;                                                      \
-        int retval;                                                     \
-                                                                        \
-        if (sscanf(buf, "%d", &speed) < 1)                              \
-                return -EINVAL;                                         \
-                                                                        \
-        if (speed < -100 || speed > 100)                                \
-                return -EINVAL;                                         \
-                                                                        \
-        mc->desired_speed[value] = speed;                               \
-                                                                        \
-        retval = set_motor(mc, value);                                  \
-                                                                        \
-        return retval ? retval : count;                                 \
-}                                                                       \
-                                                                        \
-static ssize_t show_speed##value(struct device *dev,                    \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-                                                                        \
-        return sprintf(buf, "%d\n", mc->speed[value]);                  \
-}
-
-#define speed_attr(value)                                               \
-        __ATTR(speed##value, S_IWUGO | S_IRUGO,                         \
-                show_speed##value, set_speed##value)
-
-show_set_speed(0);
-show_set_speed(1);
-
-#define show_set_acceleration(value)            \
-static ssize_t set_acceleration##value(struct device *dev,              \
-                                        struct device_attribute *attr,  \
-                                        const char *buf, size_t count)  \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-        int acceleration;                                               \
-        int retval;                                                     \
-                                                                        \
-        if (sscanf(buf, "%d", &acceleration) < 1)                       \
-                return -EINVAL;                                         \
-                                                                        \
-        if (acceleration < 0 || acceleration > 100)                     \
-                return -EINVAL;                                         \
-                                                                        \
-        mc->acceleration[value] = acceleration;                         \
-                                                                        \
-        retval = set_motor(mc, value);                                  \
-                                                                        \
-        return retval ? retval : count;                                 \
-}                                                                       \
-                                                                        \
-static ssize_t show_acceleration##value(struct device *dev,             \
-                                        struct device_attribute *attr,  \
-                                                        char *buf)      \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-                                                                        \
-        return sprintf(buf, "%d\n", mc->acceleration[value]);           \
-}
-
-#define acceleration_attr(value)        \
-        __ATTR(acceleration##value, S_IWUGO | S_IRUGO,                  \
-                show_acceleration##value, set_acceleration##value)
-
-show_set_acceleration(0);
-show_set_acceleration(1);
-
-#define show_current(value)     \
-static ssize_t show_current##value(struct device *dev,                  \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-                                                                        \
-        return sprintf(buf, "%dmA\n", (int)mc->_current[value]);        \
-}
-
-#define current_attr(value)     \
-        __ATTR(current##value, S_IRUGO, show_current##value, NULL)
-
-show_current(0);
-show_current(1);
-
-#define show_input(value)       \
-static ssize_t show_input##value(struct device *dev,                    \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct motorcontrol *mc = dev_get_drvdata(dev);                 \
-                                                                        \
-        return sprintf(buf, "%d\n", (int)mc->inputs[value]);            \
-}
-
-#define input_attr(value)       \
-        __ATTR(input##value, S_IRUGO, show_input##value, NULL)
-
-show_input(0);
-show_input(1);
-show_input(2);
-show_input(3);
-
-static struct device_attribute dev_attrs[] = {
-        input_attr(0),
-        input_attr(1),
-        input_attr(2),
-        input_attr(3),
-        speed_attr(0),
-        speed_attr(1),
-        acceleration_attr(0),
-        acceleration_attr(1),
-        current_attr(0),
-        current_attr(1)
-};
-
-static int motorcontrol_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-        struct usb_device *dev = interface_to_usbdev(intf);
-        struct usb_host_interface *interface;
-        struct usb_endpoint_descriptor *endpoint;
-        struct motorcontrol *mc;
-        int pipe, maxp, rc = -ENOMEM;
-        int bit, value, i;
-
-        interface = intf->cur_altsetting;
-        if (interface->desc.bNumEndpoints != 1)
-                return -ENODEV;
-
-        endpoint = &interface->endpoint[0].desc;
-        if (!usb_endpoint_dir_in(endpoint))
-                return -ENODEV;
-
-        /*
-         * bmAttributes
-         */
-        pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-        maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-        mc = kzalloc(sizeof(*mc), GFP_KERNEL);
-        if (!mc)
-                goto out;
-
-        mc->dev_no = -1;
-        mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &mc->data_dma);
-        if (!mc->data)
-                goto out;
-
-        mc->irq = usb_alloc_urb(0, GFP_KERNEL);
-        if (!mc->irq)
-                goto out;
-
-        mc->udev = usb_get_dev(dev);
-        mc->intf = intf;
-        mc->acceleration[0] = mc->acceleration[1] = 10;
-        INIT_DELAYED_WORK(&mc->do_notify, do_notify);
-        usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data,
-                        maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
-                        motorcontrol_irq, mc, endpoint->bInterval);
-        mc->irq->transfer_dma = mc->data_dma;
-        mc->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-        usb_set_intfdata(intf, mc);
-
-        do {
-                bit = find_first_zero_bit(&device_no, sizeof(device_no));
-                value = test_and_set_bit(bit, &device_no);
-        } while(value);
-        mc->dev_no = bit;
-
-        mc->dev = device_create(phidget_class, &mc->udev->dev, MKDEV(0, 0), mc,
-                                "motorcontrol%d", mc->dev_no);
-        if (IS_ERR(mc->dev)) {
-                rc = PTR_ERR(mc->dev);
-                mc->dev = NULL;
-                goto out;
-        }
-
-        if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
-                rc = -EIO;
-                goto out;
-        }
-
-        for (i=0; i<ARRAY_SIZE(dev_attrs); i++) {
-                rc = device_create_file(mc->dev, &dev_attrs[i]);
-                if (rc)
-                        goto out2;
-        }
-
-        dev_info(&intf->dev, "USB PhidgetMotorControl attached\n");
-
-        return 0;
-out2:
-        while (i-- > 0)
-                device_remove_file(mc->dev, &dev_attrs[i]);
-out:
-        if (mc) {
-                usb_free_urb(mc->irq);
-                if (mc->data)
-                        usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
-                if (mc->dev)
-                        device_unregister(mc->dev);
-                if (mc->dev_no >= 0)
-                        clear_bit(mc->dev_no, &device_no);
-
-                kfree(mc);
-        }
-
-        return rc;
-}
-
-static void motorcontrol_disconnect(struct usb_interface *interface)
-{
-        struct motorcontrol *mc;
-        int i;
-
-        mc = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
-        if (!mc)
-                return;
-
-        usb_kill_urb(mc->irq);
-        usb_free_urb(mc->irq);
-        usb_buffer_free(mc->udev, URB_INT_SIZE, mc->data, mc->data_dma);
-
-        cancel_delayed_work(&mc->do_notify);
-
-        for (i=0; i<ARRAY_SIZE(dev_attrs); i++)
-                device_remove_file(mc->dev, &dev_attrs[i]);
-
-        device_unregister(mc->dev);
-
-        usb_put_dev(mc->udev);
-        clear_bit(mc->dev_no, &device_no);
-        kfree(mc);
-
-        dev_info(&interface->dev, "USB PhidgetMotorControl detached\n");
-}
-
-static struct usb_driver motorcontrol_driver = {
-        .name = "phidgetmotorcontrol",
-        .probe = motorcontrol_probe,
-        .disconnect = motorcontrol_disconnect,
-        .id_table = id_table
-};
-
-static int __init motorcontrol_init(void)
-{
-        int retval = 0;
-
-        retval = usb_register(&motorcontrol_driver);
-        if (retval)
-                err("usb_register failed. Error number %d", retval);
-
-        return retval;
-}
-
-static void __exit motorcontrol_exit(void)
-{
-        usb_deregister(&motorcontrol_driver);
-}
-
-module_init(motorcontrol_init);
-module_exit(motorcontrol_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
deleted file mode 100644
index bef6fe16364b..000000000000
--- a/drivers/usb/misc/phidgetservo.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * USB PhidgetServo driver 1.0
- *
- * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is a driver for the USB PhidgetServo version 2.0 and 3.0 servo 
- * controllers available at: http://www.phidgets.com/ 
- *
- * Note that the driver takes input as: degrees.minutes
- *
- * CAUTION: Generally you should use 0 < degrees < 180 as anything else
- * is probably beyond the range of your servo and may damage it.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#include "phidget.h"
-
-#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
-#define DRIVER_DESC "USB PhidgetServo Driver"
-
-#define VENDOR_ID_GLAB                          0x06c2
-#define DEVICE_ID_GLAB_PHIDGETSERVO_QUAD        0x0038
-#define DEVICE_ID_GLAB_PHIDGETSERVO_UNI         0x0039
-
-#define VENDOR_ID_WISEGROUP                     0x0925
-#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD   0x8101
-#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI    0x8104
-
-#define SERVO_VERSION_30                        0x01
-#define SERVO_COUNT_QUAD                        0x02
-
-static struct usb_device_id id_table[] = {
-        {
-                USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_QUAD), 
-                .driver_info = SERVO_VERSION_30 | SERVO_COUNT_QUAD 
-        },
-        {
-                USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_UNI),
-                .driver_info = SERVO_VERSION_30 
-        },
-        {
-                USB_DEVICE(VENDOR_ID_WISEGROUP, 
-                                VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD),
-                .driver_info = SERVO_COUNT_QUAD 
-        },
-        {
-                USB_DEVICE(VENDOR_ID_WISEGROUP, 
-                                VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI),
-                .driver_info = 0
-        },
-        {}
-};
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int unsigned long device_no;
-
-struct phidget_servo {
-        struct usb_device *udev;
-        struct device *dev;
-        int dev_no;
-        ulong type;
-        int pulse[4];
-        int degrees[4];
-        int minutes[4];
-};
-
-static int
-change_position_v30(struct phidget_servo *servo, int servo_no, int degrees, 
-                                                                int minutes)
-{
-        int retval;
-        unsigned char *buffer;
-
-        if (degrees < -23 || degrees > 362)
-                return -EINVAL;
-
-        buffer = kmalloc(6, GFP_KERNEL);
-        if (!buffer) {
-                dev_err(&servo->udev->dev, "%s - out of memory\n",
-                        __func__);
-                return -ENOMEM;
-        }
-
-        /*
-         * pulse = 0 - 4095
-         * angle = 0 - 180 degrees
-         *
-         * pulse = angle * 10.6 + 243.8 
-         */
-        servo->pulse[servo_no] = ((degrees*60 + minutes)*106 + 2438*60)/600;    
-        servo->degrees[servo_no]= degrees;
-        servo->minutes[servo_no]= minutes;      
-
-        /* 
-         * The PhidgetServo v3.0 is controlled by sending 6 bytes,
-         * 4 * 12 bits for each servo.
-         *
-         * low = lower 8 bits pulse
-         * high = higher 4 bits pulse
-         *
-         * offset     bits
-         * +---+-----------------+
-         * | 0 |      low 0      |
-         * +---+--------+--------+
-         * | 1 | high 1 | high 0 |
-         * +---+--------+--------+
-         * | 2 |      low 1      |
-         * +---+-----------------+
-         * | 3 |      low 2      |
-         * +---+--------+--------+
-         * | 4 | high 3 | high 2 |
-         * +---+--------+--------+
-         * | 5 |      low 3      |
-         * +---+-----------------+
-         */
-
-        buffer[0] = servo->pulse[0] & 0xff;
-        buffer[1] = (servo->pulse[0] >> 8 & 0x0f)
-            | (servo->pulse[1] >> 4 & 0xf0);
-        buffer[2] = servo->pulse[1] & 0xff;
-        buffer[3] = servo->pulse[2] & 0xff;
-        buffer[4] = (servo->pulse[2] >> 8 & 0x0f)
-            | (servo->pulse[3] >> 4 & 0xf0);
-        buffer[5] = servo->pulse[3] & 0xff;
-
-        dev_dbg(&servo->udev->dev,
-                "data: %02x %02x %02x %02x %02x %02x\n",
-                buffer[0], buffer[1], buffer[2],
-                buffer[3], buffer[4], buffer[5]);
-
-        retval = usb_control_msg(servo->udev,
-                                 usb_sndctrlpipe(servo->udev, 0),
-                                 0x09, 0x21, 0x0200, 0x0000, buffer, 6, 2000);
-
-        kfree(buffer);
-
-        return retval;
-}
-
-static int
-change_position_v20(struct phidget_servo *servo, int servo_no, int degrees,
-                                                                int minutes)
-{
-        int retval;
-        unsigned char *buffer;
-
-        if (degrees < -23 || degrees > 278)
-                return -EINVAL;
-
-        buffer = kmalloc(2, GFP_KERNEL);
-        if (!buffer) {
-                dev_err(&servo->udev->dev, "%s - out of memory\n",
-                        __func__);
-                return -ENOMEM;
-        }
-
-        /*
-         * angle = 0 - 180 degrees
-         * pulse = angle + 23
-         */
-        servo->pulse[servo_no]= degrees + 23;
-        servo->degrees[servo_no]= degrees;
-        servo->minutes[servo_no]= 0;
-
-        /*
-         * The PhidgetServo v2.0 is controlled by sending two bytes. The
-         * first byte is the servo number xor'ed with 2:
-         *
-         * servo 0 = 2
-         * servo 1 = 3
-         * servo 2 = 0
-         * servo 3 = 1
-         *
-         * The second byte is the position.
-         */
-
-        buffer[0] = servo_no ^ 2;
-        buffer[1] = servo->pulse[servo_no];
-
-        dev_dbg(&servo->udev->dev, "data: %02x %02x\n", buffer[0], buffer[1]);
-
-        retval = usb_control_msg(servo->udev,
-                                 usb_sndctrlpipe(servo->udev, 0),
-                                 0x09, 0x21, 0x0200, 0x0000, buffer, 2, 2000);
-
-        kfree(buffer);
-
-        return retval;
-}
-
-#define show_set(value) \
-static ssize_t set_servo##value (struct device *dev,                    \
-                                        struct device_attribute *attr,  \
-                                        const char *buf, size_t count)  \
-{                                                                       \
-        int degrees, minutes, retval;                                   \
-        struct phidget_servo *servo = dev_get_drvdata(dev);             \
-                                                                        \
-        minutes = 0;                                                    \
-        /* must at least convert degrees */                             \
-        if (sscanf(buf, "%d.%d", &degrees, &minutes) < 1) {             \
-                return -EINVAL;                                         \
-        }                                                               \
-                                                                        \
-        if (minutes < 0 || minutes > 59)                                \
-                return -EINVAL;                                         \
-                                                                        \
-        if (servo->type & SERVO_VERSION_30)                             \
-                retval = change_position_v30(servo, value, degrees,     \
-                                                        minutes);       \
-        else                                                            \
-                retval = change_position_v20(servo, value, degrees,     \
-                                                        minutes);       \
-                                                                        \
-        return retval < 0 ? retval : count;                             \
-}                                                                       \
-                                                                        \
-static ssize_t show_servo##value (struct device *dev,                   \
-                                        struct device_attribute *attr,  \
-                                        char *buf)                      \
-{                                                                       \
-        struct phidget_servo *servo = dev_get_drvdata(dev);             \
-                                                                        \
-        return sprintf(buf, "%d.%02d\n", servo->degrees[value],         \
-                                servo->minutes[value]);                 \
-}
-
-#define servo_attr(value)                                               \
-        __ATTR(servo##value, S_IWUGO | S_IRUGO,                         \
-                show_servo##value, set_servo##value)
-show_set(0);
-show_set(1);
-show_set(2);
-show_set(3);
-
-static struct device_attribute dev_attrs[] = {
-        servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3)
-};
-
-static int
-servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
-        struct usb_device *udev = interface_to_usbdev(interface);
-        struct phidget_servo *dev;
-        int bit, value, rc;
-        int servo_count, i;
-
-        dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
-        if (dev == NULL) {
-                dev_err(&interface->dev, "%s - out of memory\n", __func__);
-                rc = -ENOMEM;
-                goto out;
-        }
-
-        dev->udev = usb_get_dev(udev);
-        dev->type = id->driver_info;
-        dev->dev_no = -1;
-        usb_set_intfdata(interface, dev);
-
-        do {
-                bit = find_first_zero_bit(&device_no, sizeof(device_no));
-                value = test_and_set_bit(bit, &device_no);
-        } while (value);
-        dev->dev_no = bit;
-
-        dev->dev = device_create(phidget_class, &dev->udev->dev, MKDEV(0, 0),
-                                 dev, "servo%d", dev->dev_no);
-        if (IS_ERR(dev->dev)) {
-                rc = PTR_ERR(dev->dev);
-                dev->dev = NULL;
-                goto out;
-        }
-
-        servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
-
-        for (i=0; i<servo_count; i++) {
-                rc = device_create_file(dev->dev, &dev_attrs[i]);
-                if (rc)
-                        goto out2;
-        }
-
-        dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
-                servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
-
-        if (!(dev->type & SERVO_VERSION_30))
-                dev_info(&interface->dev,
-                         "WARNING: v2.0 not tested! Please report if it works.\n");
-
-        return 0;
-out2:
-        while (i-- > 0)
-                device_remove_file(dev->dev, &dev_attrs[i]);
-out:
-        if (dev) {
-                if (dev->dev)
-                        device_unregister(dev->dev);
-                if (dev->dev_no >= 0)
-                        clear_bit(dev->dev_no, &device_no);
-
-                kfree(dev);
-        }
-
-        return rc;
-}
-
-static void
-servo_disconnect(struct usb_interface *interface)
-{
-        struct phidget_servo *dev;
-        int servo_count, i;
-
-        dev = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
-
-        if (!dev)
-                return;
-
-        servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
-
-        for (i=0; i<servo_count; i++)
-                device_remove_file(dev->dev, &dev_attrs[i]);
-
-        device_unregister(dev->dev);
-        usb_put_dev(dev->udev);
-
-        dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
-                servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
-
-        clear_bit(dev->dev_no, &device_no);
-        kfree(dev);
-}
-
-static struct usb_driver servo_driver = {
-        .name = "phidgetservo",
-        .probe = servo_probe,
-        .disconnect = servo_disconnect,
-        .id_table = id_table
-};
-
-static int __init
-phidget_servo_init(void)
-{
-        int retval;
-
-        retval = usb_register(&servo_driver);
-        if (retval)
-                err("usb_register failed. Error number %d", retval);
-
-        return retval;
-}
-
-static void __exit
-phidget_servo_exit(void)
-{
-        usb_deregister(&servo_driver);
-}
-
-module_init(phidget_servo_init);
-module_exit(phidget_servo_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 4cf27c72423e..f8d9045d668a 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,10 +37,13 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+/* #9 was MON_IOCT_SETAPI */
+#define MON_IOCX_GETX   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get)
 
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
+#define MON_IOCX_GETX32   _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32)
 #endif
 
 /*
@@ -92,7 +95,29 @@ struct mon_bin_hdr {
         int status;
         unsigned int len_urb;   /* Length of data (submitted or actual) */
         unsigned int len_cap;   /* Delivered length */
-        unsigned char setup[SETUP_LEN]; /* Only for Control S-type */
+        union {
+                unsigned char setup[SETUP_LEN]; /* Only for Control S-type */
+                struct iso_rec {
+                        int error_count;
+                        int numdesc;
+                } iso;
+        } s;
+        int interval;
+        int start_frame;
+        unsigned int xfer_flags;
+        unsigned int ndesc;     /* Actual number of ISO descriptors */
+};
+
+/*
+ * ISO vector, packed into the head of data stream.
+ * This has to take 16 bytes to make sure that the end of buffer
+ * wrap is not happening in the middle of a descriptor.
+ */
+struct mon_bin_isodesc {
+        int          iso_status;
+        unsigned int iso_off;
+        unsigned int iso_len;
+        u32 _pad;
 };
 
 /* per file statistic */
@@ -102,7 +127,7 @@ struct mon_bin_stats {
 };
 
 struct mon_bin_get {
-        struct mon_bin_hdr __user *hdr; /* Only 48 bytes, not 64. */
+        struct mon_bin_hdr __user *hdr; /* Can be 48 bytes or 64. */
         void __user *data;
         size_t alloc;           /* Length of data (can be zero) */
 };
@@ -131,6 +156,11 @@ struct mon_bin_mfetch32 {
 #define PKT_ALIGN   64
 #define PKT_SIZE    64
 
+#define PKT_SZ_API0 48  /* API 0 (2.6.20) size */
+#define PKT_SZ_API1 64  /* API 1 size: extra fields */
+
+#define ISODESC_MAX   128       /* Same number as usbfs allows, 2048 bytes. */
+
 /* max number of USB bus supported */
 #define MON_BIN_MAX_MINOR 128
 
@@ -360,12 +390,8 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
     const struct urb *urb, char ev_type)
 {
 
-        if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S')
-                return '-';
-
         if (urb->setup_packet == NULL)
                 return 'Z';
-
         memcpy(setupb, urb->setup_packet, SETUP_LEN);
         return 0;
 }
@@ -387,6 +413,26 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
         return 0;
 }
 
+static void mon_bin_get_isodesc(const struct mon_reader_bin *rp,
+    unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc)
+{
+        struct mon_bin_isodesc *dp;
+        struct usb_iso_packet_descriptor *fp;
+
+        fp = urb->iso_frame_desc;
+        while (ndesc-- != 0) {
+                dp = (struct mon_bin_isodesc *)
+                    (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE);
+                dp->iso_status = fp->status;
+                dp->iso_off = fp->offset;
+                dp->iso_len = (ev_type == 'S') ? fp->length : fp->actual_length;
+                dp->_pad = 0;
+                if ((offset += sizeof(struct mon_bin_isodesc)) >= rp->b_size)
+                        offset = 0;
+                fp++;
+        }
+}
+
 static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
     char ev_type, int status)
 {
@@ -396,6 +442,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
         unsigned int urb_length;
         unsigned int offset;
         unsigned int length;
+        unsigned int ndesc, lendesc;
         unsigned char dir;
         struct mon_bin_hdr *ep;
         char data_tag = 0;
@@ -407,6 +454,19 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
         /*
          * Find the maximum allowable length, then allocate space.
          */
+        if (usb_endpoint_xfer_isoc(epd)) {
+                if (urb->number_of_packets < 0) {
+                        ndesc = 0;
+                } else if (urb->number_of_packets >= ISODESC_MAX) {
+                        ndesc = ISODESC_MAX;
+                } else {
+                        ndesc = urb->number_of_packets;
+                }
+        } else {
+                ndesc = 0;
+        }
+        lendesc = ndesc*sizeof(struct mon_bin_isodesc);
+
         urb_length = (ev_type == 'S') ?
             urb->transfer_buffer_length : urb->actual_length;
         length = urb_length;
@@ -429,10 +489,12 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
                 dir = 0;
         }
 
-        if (rp->mmap_active)
-                offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE);
-        else
-                offset = mon_buff_area_alloc(rp, length + PKT_SIZE);
+        if (rp->mmap_active) {
+                offset = mon_buff_area_alloc_contiguous(rp,
+                                                 length + PKT_SIZE + lendesc);
+        } else {
+                offset = mon_buff_area_alloc(rp, length + PKT_SIZE + lendesc);
+        }
         if (offset == ~0) {
                 rp->cnt_lost++;
                 spin_unlock_irqrestore(&rp->b_lock, flags);
@@ -456,9 +518,31 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
         ep->ts_usec = ts.tv_usec;
         ep->status = status;
         ep->len_urb = urb_length;
-        ep->len_cap = length;
+        ep->len_cap = length + lendesc;
+        ep->xfer_flags = urb->transfer_flags;
+
+        if (usb_endpoint_xfer_int(epd)) {
+                ep->interval = urb->interval;
+        } else if (usb_endpoint_xfer_isoc(epd)) {
+                ep->interval = urb->interval;
+                ep->start_frame = urb->start_frame;
+                ep->s.iso.error_count = urb->error_count;
+                ep->s.iso.numdesc = urb->number_of_packets;
+        }
+
+        if (usb_endpoint_xfer_control(epd) && ev_type == 'S') {
+                ep->flag_setup = mon_bin_get_setup(ep->s.setup, urb, ev_type);
+        } else {
+                ep->flag_setup = '-';
+        }
+
+        if (ndesc != 0) {
+                ep->ndesc = ndesc;
+                mon_bin_get_isodesc(rp, offset, urb, ev_type, ndesc);
+                if ((offset += lendesc) >= rp->b_size)
+                        offset -= rp->b_size;
+        }
 
-        ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type);
         if (length != 0) {
                 ep->flag_data = mon_bin_get_data(rp, offset, urb, length);
                 if (ep->flag_data != 0) {       /* Yes, it's 0x00, not '0' */
@@ -592,7 +676,8 @@ err_alloc:
  * Returns zero or error.
  */
 static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
-    struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes)
+    struct mon_bin_hdr __user *hdr, unsigned int hdrbytes,
+    void __user *data, unsigned int nbytes)
 {
         unsigned long flags;
         struct mon_bin_hdr *ep;
@@ -609,7 +694,7 @@ static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
 
         ep = MON_OFF2HDR(rp, rp->b_out);
 
-        if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) {
+        if (copy_to_user(hdr, ep, hdrbytes)) {
                 mutex_unlock(&rp->fetch_lock);
                 return -EFAULT;
         }
@@ -657,6 +742,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
     size_t nbytes, loff_t *ppos)
 {
         struct mon_reader_bin *rp = file->private_data;
+        unsigned int hdrbytes = PKT_SZ_API0;
         unsigned long flags;
         struct mon_bin_hdr *ep;
         unsigned int offset;
@@ -674,8 +760,8 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
 
         ep = MON_OFF2HDR(rp, rp->b_out);
 
-        if (rp->b_read < sizeof(struct mon_bin_hdr)) {
-                step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read);
+        if (rp->b_read < hdrbytes) {
+                step_len = min(nbytes, (size_t)(hdrbytes - rp->b_read));
                 ptr = ((char *)ep) + rp->b_read;
                 if (step_len && copy_to_user(buf, ptr, step_len)) {
                         mutex_unlock(&rp->fetch_lock);
@@ -687,13 +773,13 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
                 done += step_len;
         }
 
-        if (rp->b_read >= sizeof(struct mon_bin_hdr)) {
+        if (rp->b_read >= hdrbytes) {
                 step_len = ep->len_cap;
-                step_len -= rp->b_read - sizeof(struct mon_bin_hdr);
+                step_len -= rp->b_read - hdrbytes;
                 if (step_len > nbytes)
                         step_len = nbytes;
                 offset = rp->b_out + PKT_SIZE;
-                offset += rp->b_read - sizeof(struct mon_bin_hdr);
+                offset += rp->b_read - hdrbytes;
                 if (offset >= rp->b_size)
                         offset -= rp->b_size;
                 if (copy_from_buf(rp, offset, buf, step_len)) {
@@ -709,7 +795,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
         /*
          * Check if whole packet was read, and if so, jump to the next one.
          */
-        if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) {
+        if (rp->b_read >= hdrbytes + ep->len_cap) {
                 spin_lock_irqsave(&rp->b_lock, flags);
                 mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
                 spin_unlock_irqrestore(&rp->b_lock, flags);
@@ -908,6 +994,7 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
                 break;
 
         case MON_IOCX_GET:
+        case MON_IOCX_GETX:
                 {
                 struct mon_bin_get getb;
 
@@ -917,8 +1004,9 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
 
                 if (getb.alloc > 0x10000000)    /* Want to cast to u32 */
                         return -EINVAL;
-                ret = mon_bin_get_event(file, rp,
-                          getb.hdr, getb.data, (unsigned int)getb.alloc);
+                ret = mon_bin_get_event(file, rp, getb.hdr,
+                    (cmd == MON_IOCX_GET)? PKT_SZ_API0: PKT_SZ_API1,
+                    getb.data, (unsigned int)getb.alloc);
                 }
                 break;
 
@@ -984,16 +1072,18 @@ static long mon_bin_compat_ioctl(struct file *file,
 
         switch (cmd) {
 
-        case MON_IOCX_GET32: {
+        case MON_IOCX_GET32:
+        case MON_IOCX_GETX32:
+                {
                 struct mon_bin_get32 getb;
 
                 if (copy_from_user(&getb, (void __user *)arg,
                                             sizeof(struct mon_bin_get32)))
                         return -EFAULT;
 
-                ret = mon_bin_get_event(file, rp,
-                    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-                    getb.alloc32);
+                ret = mon_bin_get_event(file, rp, compat_ptr(getb.hdr32),
+                    (cmd == MON_IOCX_GET32)? PKT_SZ_API0: PKT_SZ_API1,
+                    compat_ptr(getb.data32), getb.alloc32);
                 if (ret < 0)
                         return ret;
                 }
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 9985db08e7db..b66e8544d8b9 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -20,8 +20,8 @@ config USB_MUSB_HDRC
           it's being used with, including the USB peripheral role,
           or the USB host role, or both.
 
-          Texas Instruments parts using this IP include DaVinci 644x,
-          OMAP 243x, OMAP 343x, and TUSB 6010.
+          Texas Instruments familiies using this IP include DaVinci
+          (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 
           Analog Devices parts using this IP include Blackfin BF54x,
           BF525 and BF527.
@@ -40,7 +40,7 @@ config USB_MUSB_SOC
         default y if (BF54x && !BF544)
         default y if (BF52x && !BF522 && !BF523)
 
-comment "DaVinci 644x USB support"
+comment "DaVinci 35x and 644x USB support"
         depends on USB_MUSB_HDRC && ARCH_DAVINCI
 
 comment "OMAP 243x high speed USB support"
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 2dc7606f319c..10d11ab113ab 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -48,6 +48,9 @@
 #include "cppi_dma.h"
 
 
+#define USB_PHY_CTRL    IO_ADDRESS(USBPHY_CTL_PADDR)
+#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+
 /* REVISIT (PM) we should be able to keep the PHY in low power mode most
  * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
  * and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -56,20 +59,26 @@
 
 static inline void phy_on(void)
 {
-        /* start the on-chip PHY and its PLL */
-        __raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
-                        (void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
-        while ((__raw_readl((void __force __iomem *)
-                                IO_ADDRESS(USBPHY_CTL_PADDR))
-                        & USBPHY_PHYCLKGD) == 0)
+        u32     phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+        /* power everything up; start the on-chip PHY and its PLL */
+        phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+        phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+        __raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+        /* wait for PLL to lock before proceeding */
+        while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
                 cpu_relax();
 }
 
 static inline void phy_off(void)
 {
-        /* powerdown the on-chip PHY and its oscillator */
-        __raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
-                        IO_ADDRESS(USBPHY_CTL_PADDR));
+        u32     phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+        /* powerdown the on-chip PHY, its PLL, and the OTG block */
+        phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON);
+        phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+        __raw_writel(phy_ctrl, USB_PHY_CTRL);
 }
 
 static int dma_off = 1;
@@ -126,10 +135,6 @@ void musb_platform_disable(struct musb *musb)
 }
 
 
-/* REVISIT it's not clear whether DaVinci can support full OTG.  */
-
-static int vbus_state = -1;
-
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 #define portstate(stmt)         stmt
 #else
@@ -137,10 +142,19 @@ static int vbus_state = -1;
 #endif
 
 
-/* VBUS SWITCHING IS BOARD-SPECIFIC */
+/*
+ * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
+ * which doesn't wire DRVVBUS to the FET that switches it.  Unclear
+ * if that's a problem with the DM6446 chip or just with that board.
+ *
+ * In either case, the DM355 EVM automates DRVVBUS the normal way,
+ * when J10 is out, and TI documents it as handling OTG.
+ */
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
 
+static int vbus_state = -1;
+
 /* I2C operations are always synchronous, and require a task context.
  * With unloaded systems, using the shared workqueue seems to suffice
  * to satisfy the 100msec A_WAIT_VRISE timeout...
@@ -150,12 +164,12 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
         gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
         vbus_state = !vbus_state;
 }
-static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
 
 #endif  /* EVM */
 
 static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 {
+#ifdef CONFIG_MACH_DAVINCI_EVM
         if (is_on)
                 is_on = 1;
 
@@ -163,16 +177,17 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
                 return;
         vbus_state = !is_on;            /* 0/1 vs "-1 == unknown/init" */
 
-#ifdef CONFIG_MACH_DAVINCI_EVM
         if (machine_is_davinci_evm()) {
+                static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
                 if (immediate)
                         gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
                 else
                         schedule_work(&evm_vbus_work);
         }
-#endif
         if (immediate)
                 vbus_state = is_on;
+#endif
 }
 
 static void davinci_set_vbus(struct musb *musb, int is_on)
@@ -391,6 +406,17 @@ int __init musb_platform_init(struct musb *musb)
         musb->board_set_vbus = davinci_set_vbus;
         davinci_source_power(musb, 0, 1);
 
+        /* dm355 EVM swaps D+/D- for signal integrity, and
+         * is clocked from the main 24 MHz crystal.
+         */
+        if (machine_is_davinci_dm355_evm()) {
+                u32     phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+                phy_ctrl &= ~(3 << 9);
+                phy_ctrl |= USBPHY_DATAPOL;
+                __raw_writel(phy_ctrl, USB_PHY_CTRL);
+        }
+
         /* reset the controller */
         musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -401,8 +427,7 @@ int __init musb_platform_init(struct musb *musb)
 
         /* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
         pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
-                revision, __raw_readl((void __force __iomem *)
-                                IO_ADDRESS(USBPHY_CTL_PADDR)),
+                revision, __raw_readl(USB_PHY_CTRL),
                 musb_readb(tibase, DAVINCI_USB_CTRL_REG));
 
         musb->isr = davinci_interrupt;
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 7fb6238e270f..046c84433cad 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -15,14 +15,21 @@
  */
 
 /* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR        (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
-#define USBPHY_PHYCLKGD         (1 << 8)
-#define USBPHY_SESNDEN          (1 << 7)        /* v(sess_end) comparator */
-#define USBPHY_VBDTCTEN         (1 << 6)        /* v(bus) comparator */
-#define USBPHY_PHYPLLON         (1 << 4)        /* override pll suspend */
-#define USBPHY_CLKO1SEL         (1 << 3)
-#define USBPHY_OSCPDWN          (1 << 2)
-#define USBPHY_PHYPDWN          (1 << 0)
+#define USBPHY_CTL_PADDR        (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_DATAPOL          BIT(11) /* (dm355) switch D+/D- */
+#define USBPHY_PHYCLKGD         BIT(8)
+#define USBPHY_SESNDEN          BIT(7)  /* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN         BIT(6)  /* v(bus) comparator */
+#define USBPHY_VBUSSENS         BIT(5)  /* (dm355,ro) is vbus > 0.5V */
+#define USBPHY_PHYPLLON         BIT(4)  /* override pll suspend */
+#define USBPHY_CLKO1SEL         BIT(3)
+#define USBPHY_OSCPDWN          BIT(2)
+#define USBPHY_OTGPDWN          BIT(1)
+#define USBPHY_PHYPDWN          BIT(0)
+
+#define DM355_DEEPSLEEP_PADDR   (DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DRVVBUS_FORCE           BIT(2)
+#define DRVVBUS_OVERRIDE        BIT(1)
 
 /* For now include usb OTG module registers here */
 #define DAVINCI_USB_VERSION_REG         0x00
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index af77e4659006..338cd1611ab3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -769,7 +769,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
                 case OTG_STATE_A_SUSPEND:
                         usb_hcd_resume_root_hub(musb_to_hcd(musb));
                         musb_root_disconnect(musb);
-                        if (musb->a_wait_bcon != 0)
+                        if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
                                 musb_platform_try_idle(musb, jiffies
                                         + msecs_to_jiffies(musb->a_wait_bcon));
                         break;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 630946a2d9fc..efb39b5e55b5 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -331,7 +331,6 @@ struct musb {
         struct list_head        control;        /* of musb_qh */
         struct list_head        in_bulk;        /* of musb_qh */
         struct list_head        out_bulk;       /* of musb_qh */
-        struct musb_qh          *periodic[32];  /* tree of interrupt+iso */
 #endif
 
         /* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -479,10 +478,11 @@ static inline void musb_configure_ep0(struct musb *musb)
 static inline int musb_read_fifosize(struct musb *musb,
                 struct musb_hw_ep *hw_ep, u8 epnum)
 {
+        void *mbase = musb->mregs;
         u8 reg = 0;
 
         /* read from core using indexed model */
-        reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+        reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
         /* 0's returned when no more endpoints */
         if (!reg)
                 return -ENODEV;
@@ -509,6 +509,7 @@ static inline void musb_configure_ep0(struct musb *musb)
 {
         musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
         musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+        musb->endpoints[0].is_shared_fifo = true;
 }
 #endif /* CONFIG_BLACKFIN */
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 6dbbd0786a6a..499c431a6d62 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -64,11 +64,8 @@
  *
  * - DMA (Mentor/OMAP) ...has at least toggle update problems
  *
- * - Still no traffic scheduling code to make NAKing for bulk or control
- *   transfers unable to starve other requests; or to make efficient use
- *   of hardware with periodic transfers.  (Note that network drivers
- *   commonly post bulk reads that stay pending for a long time; these
- *   would make very visible trouble.)
+ * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
+ *   starvation ... nothing yet for TX, interrupt, or bulk.
  *
  * - Not tested with HNP, but some SRP paths seem to behave.
  *
@@ -88,11 +85,8 @@
  *
  * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
  * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
- *
  * (Yes, bulk _could_ use more of the endpoints than that, and would even
- * benefit from it ... one remote device may easily be NAKing while others
- * need to perform transfers in that same direction.  The same thing could
- * be done in software though, assuming dma cooperates.)
+ * benefit from it.)
  *
  * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
  * So far that scheduling is both dumb and optimistic:  the endpoint will be
@@ -201,8 +195,9 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
                 len = urb->iso_frame_desc[0].length;
                 break;
         default:                /* bulk, interrupt */
-                buf = urb->transfer_buffer;
-                len = urb->transfer_buffer_length;
+                /* actual_length may be nonzero on retry paths */
+                buf = urb->transfer_buffer + urb->actual_length;
+                len = urb->transfer_buffer_length - urb->actual_length;
         }
 
         DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
@@ -395,7 +390,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
                          * de-allocated if it's tracked and allocated;
                          * and where we'd update the schedule tree...
                          */
-                        musb->periodic[ep->epnum] = NULL;
                         kfree(qh);
                         qh = NULL;
                         break;
@@ -1045,7 +1039,8 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 
                 /* NOTE:  this code path would be a good place to PAUSE a
                  * control transfer, if another one is queued, so that
-                 * ep0 is more likely to stay busy.
+                 * ep0 is more likely to stay busy.  That's already done
+                 * for bulk RX transfers.
                  *
                  * if (qh->ring.next != &musb->control), then
                  * we have a candidate... NAKing is *NOT* an error
@@ -1197,6 +1192,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
                 /* NOTE:  this code path would be a good place to PAUSE a
                  * transfer, if there's some other (nonperiodic) tx urb
                  * that could use this fifo.  (dma complicates it...)
+                 * That's already done for bulk RX transfers.
                  *
                  * if (bulk && qh->ring.next != &musb->out_bulk), then
                  * we have a candidate... NAKing is *NOT* an error
@@ -1358,6 +1354,50 @@ finish:
 
 #endif
 
+/* Schedule next QH from musb->in_bulk and move the current qh to
+ * the end; avoids starvation for other endpoints.
+ */
+static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
+{
+        struct dma_channel      *dma;
+        struct urb              *urb;
+        void __iomem            *mbase = musb->mregs;
+        void __iomem            *epio = ep->regs;
+        struct musb_qh          *cur_qh, *next_qh;
+        u16                     rx_csr;
+
+        musb_ep_select(mbase, ep->epnum);
+        dma = is_dma_capable() ? ep->rx_channel : NULL;
+
+        /* clear nak timeout bit */
+        rx_csr = musb_readw(epio, MUSB_RXCSR);
+        rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+        rx_csr &= ~MUSB_RXCSR_DATAERROR;
+        musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+        cur_qh = first_qh(&musb->in_bulk);
+        if (cur_qh) {
+                urb = next_urb(cur_qh);
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                        musb->dma_controller->channel_abort(dma);
+                        urb->actual_length += dma->actual_len;
+                        dma->actual_len = 0L;
+                }
+                musb_save_toggle(ep, 1, urb);
+
+                /* move cur_qh to end of queue */
+                list_move_tail(&cur_qh->ring, &musb->in_bulk);
+
+                /* get the next qh from musb->in_bulk */
+                next_qh = first_qh(&musb->in_bulk);
+
+                /* set rx_reinit and schedule the next qh */
+                ep->rx_reinit = 1;
+                musb_start_urb(musb, 1, next_qh);
+        }
+}
+
 /*
  * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
  * and high-bandwidth IN transfer cases.
@@ -1421,18 +1461,26 @@ void musb_host_rx(struct musb *musb, u8 epnum)
         } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
 
                 if (USB_ENDPOINT_XFER_ISOC != qh->type) {
-                        /* NOTE this code path would be a good place to PAUSE a
-                         * transfer, if there's some other (nonperiodic) rx urb
-                         * that could use this fifo.  (dma complicates it...)
+                        DBG(6, "RX end %d NAK timeout\n", epnum);
+
+                        /* NOTE: NAKing is *NOT* an error, so we want to
+                         * continue.  Except ... if there's a request for
+                         * another QH, use that instead of starving it.
                          *
-                         * if (bulk && qh->ring.next != &musb->in_bulk), then
-                         * we have a candidate... NAKing is *NOT* an error
+                         * Devices like Ethernet and serial adapters keep
+                         * reads posted at all times, which will starve
+                         * other devices without this logic.
                          */
-                        DBG(6, "RX end %d NAK timeout\n", epnum);
+                        if (usb_pipebulk(urb->pipe)
+                                        && qh->mux == 1
+                                        && !list_is_singular(&musb->in_bulk)) {
+                                musb_bulk_rx_nak_timeout(musb, hw_ep);
+                                return;
+                        }
                         musb_ep_select(mbase, epnum);
-                        musb_writew(epio, MUSB_RXCSR,
-                                        MUSB_RXCSR_H_WZC_BITS
-                                        | MUSB_RXCSR_H_REQPKT);
+                        rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+                        rx_csr &= ~MUSB_RXCSR_DATAERROR;
+                        musb_writew(epio, MUSB_RXCSR, rx_csr);
 
                         goto finish;
                 } else {
@@ -1711,31 +1759,27 @@ static int musb_schedule(
 
         /* else, periodic transfers get muxed to other endpoints */
 
-        /* FIXME this doesn't consider direction, so it can only
-         * work for one half of the endpoint hardware, and assumes
-         * the previous cases handled all non-shared endpoints...
-         */
-
-        /* we know this qh hasn't been scheduled, so all we need to do
+        /*
+         * We know this qh hasn't been scheduled, so all we need to do
          * is choose which hardware endpoint to put it on ...
          *
          * REVISIT what we really want here is a regular schedule tree
-         * like e.g. OHCI uses, but for now musb->periodic is just an
-         * array of the _single_ logical endpoint associated with a
-         * given physical one (identity mapping logical->physical).
-         *
-         * that simplistic approach makes TT scheduling a lot simpler;
-         * there is none, and thus none of its complexity...
+         * like e.g. OHCI uses.
          */
         best_diff = 4096;
         best_end = -1;
 
-        for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+        for (epnum = 1, hw_ep = musb->endpoints + 1;
+                        epnum < musb->nr_endpoints;
+                        epnum++, hw_ep++) {
                 int     diff;
 
-                if (musb->periodic[epnum])
+                if (is_in || hw_ep->is_shared_fifo) {
+                        if (hw_ep->in_qh  != NULL)
+                                continue;
+                } else  if (hw_ep->out_qh != NULL)
                         continue;
-                hw_ep = &musb->endpoints[epnum];
+
                 if (hw_ep == musb->bulk_ep)
                         continue;
 
@@ -1756,6 +1800,17 @@ static int musb_schedule(
                         head = &musb->in_bulk;
                 else
                         head = &musb->out_bulk;
+
+                /* Enable bulk RX NAK timeout scheme when bulk requests are
+                 * multiplexed.  This scheme doen't work in high speed to full
+                 * speed scenario as NAK interrupts are not coming from a
+                 * full speed device connected to a high speed device.
+                 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
+                 * 4 (8 frame or 8ms) for FS device.
+                 */
+                if (is_in && qh->dev)
+                        qh->intv_reg =
+                                (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4;
                 goto success;
         } else if (best_end < 0) {
                 return -ENOSPC;
@@ -1764,7 +1819,6 @@ static int musb_schedule(
         idle = 1;
         qh->mux = 0;
         hw_ep = musb->endpoints + best_end;
-        musb->periodic[best_end] = qh;
         DBG(4, "qh %p periodic slot %d\n", qh, best_end);
 success:
         if (head) {
@@ -1888,13 +1942,11 @@ static int musb_urb_enqueue(
                  *
                  * The downside of disabling this is that transfer scheduling
                  * gets VERY unfair for nonperiodic transfers; a misbehaving
-                 * peripheral could make that hurt.  Or for reads, one that's
-                 * perfectly normal:  network and other drivers keep reads
-                 * posted at all times, having one pending for a week should
-                 * be perfectly safe.
+                 * peripheral could make that hurt.  That's perfectly normal
+                 * for reads from network or serial adapters ... so we have
+                 * partial NAKlimit support for bulk RX.
                  *
-                 * The upside of disabling it is avoidng transfer scheduling
-                 * code to put this aside for while.
+                 * The upside of disabling it is simpler transfer scheduling.
                  */
                 interval = 0;
         }
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index e0e9ce584175..bf677acc83db 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -285,7 +285,7 @@ int musb_hub_control(
                 desc->bDescLength = 9;
                 desc->bDescriptorType = 0x29;
                 desc->bNbrPorts = 1;
-                desc->wHubCharacteristics = __constant_cpu_to_le16(
+                desc->wHubCharacteristics = cpu_to_le16(
                                   0x0001        /* per-port power switching */
                                 | 0x0010        /* no overcurrent reporting */
                                 );
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index ee55b449ffde..aa884d072f0b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -43,7 +43,7 @@ config ISP1301_OMAP
 
 config TWL4030_USB
         tristate "TWL4030 USB Transceiver Driver"
-        depends on TWL4030_CORE
+        depends on TWL4030_CORE && REGULATOR_TWL4030
         select USB_OTG_UTILS
         help
           Enable this to support the USB OTG transceiver on TWL4030
@@ -51,4 +51,12 @@ config TWL4030_USB
           This transceiver supports high and full speed devices plus,
           in host mode, low speed.
 
+config NOP_USB_XCEIV
+        tristate "NOP USB Transceiver Driver"
+        select USB_OTG_UTILS
+        help
+         this driver is to be used by all the usb transceiver which are either
+         built-in with usb ip or which are autonomous and doesn't require any
+         phy programming such as ISP1x04 etc.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index d73c7cf5e2f7..208167856529 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)     += gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)      += isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)       += twl4030-usb.o
+obj-$(CONFIG_NOP_USB_XCEIV)     += nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)     += -DDEBUG
 ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 63a6036f04be..1c26c94513e9 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/workqueue.h>
 
 #include <linux/regulator/consumer.h>
 
@@ -34,6 +35,7 @@ struct gpio_vbus_data {
         struct regulator       *vbus_draw;
         int                     vbus_draw_enabled;
         unsigned                mA;
+        struct work_struct      work;
 };
 
 
@@ -76,24 +78,26 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
         gpio_vbus->mA = mA;
 }
 
-/* VBUS change IRQ handler */
-static irqreturn_t gpio_vbus_irq(int irq, void *data)
+static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
 {
-        struct platform_device *pdev = data;
-        struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
-        struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
-        int gpio, vbus;
+        int vbus;
 
         vbus = gpio_get_value(pdata->gpio_vbus);
         if (pdata->gpio_vbus_inverted)
                 vbus = !vbus;
 
-        dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
-                vbus ? "supplied" : "inactive",
-                gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+        return vbus;
+}
+
+static void gpio_vbus_work(struct work_struct *work)
+{
+        struct gpio_vbus_data *gpio_vbus =
+                container_of(work, struct gpio_vbus_data, work);
+        struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
+        int gpio;
 
         if (!gpio_vbus->otg.gadget)
-                return IRQ_HANDLED;
+                return;
 
         /* Peripheral controllers which manage the pullup themselves won't have
          * gpio_pullup configured here.  If it's configured here, we'll do what
@@ -101,7 +105,7 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
          * that may complicate usb_gadget_{,dis}connect() support.
          */
         gpio = pdata->gpio_pullup;
-        if (vbus) {
+        if (is_vbus_powered(pdata)) {
                 gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
                 usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
 
@@ -121,6 +125,21 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
                 usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
                 gpio_vbus->otg.state = OTG_STATE_B_IDLE;
         }
+}
+
+/* VBUS change IRQ handler */
+static irqreturn_t gpio_vbus_irq(int irq, void *data)
+{
+        struct platform_device *pdev = data;
+        struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+        struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+
+        dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
+                is_vbus_powered(pdata) ? "supplied" : "inactive",
+                gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+
+        if (gpio_vbus->otg.gadget)
+                schedule_work(&gpio_vbus->work);
 
         return IRQ_HANDLED;
 }
@@ -257,6 +276,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
                         irq, err);
                 goto err_irq;
         }
+        INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
         /* only active when a gadget is registered */
         err = otg_set_transceiver(&gpio_vbus->otg);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
new file mode 100644
index 000000000000..4b933f646f2e
--- /dev/null
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -0,0 +1,180 @@
+/*
+ * drivers/usb/otg/nop-usb-xceiv.c
+ *
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Current status:
+ *      this is to add "nop" transceiver for all those phy which is
+ *      autonomous such as isp1504 etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+
+struct nop_usb_xceiv {
+        struct otg_transceiver  otg;
+        struct device           *dev;
+};
+
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+        .name           = "nop_usb_xceiv",
+        .id             = -1,
+        .dev = {
+                .dma_mask               = &nop_xceiv_dmamask,
+                .coherent_dma_mask      = DMA_32BIT_MASK,
+                .platform_data          = NULL,
+        },
+};
+
+void usb_nop_xceiv_register(void)
+{
+        if (platform_device_register(&nop_xceiv_device) < 0) {
+                printk(KERN_ERR "Unable to register usb nop transceiver\n");
+                return;
+        }
+}
+
+void usb_nop_xceiv_unregister(void)
+{
+        platform_device_unregister(&nop_xceiv_device);
+}
+
+static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
+{
+        return container_of(x, struct nop_usb_xceiv, otg);
+}
+
+static int nop_set_suspend(struct otg_transceiver *x, int suspend)
+{
+        return 0;
+}
+
+static int nop_set_peripheral(struct otg_transceiver *x,
+                struct usb_gadget *gadget)
+{
+        struct nop_usb_xceiv *nop;
+
+        if (!x)
+                return -ENODEV;
+
+        nop = xceiv_to_nop(x);
+
+        if (!gadget) {
+                nop->otg.gadget = NULL;
+                return -ENODEV;
+        }
+
+        nop->otg.gadget = gadget;
+        nop->otg.state = OTG_STATE_B_IDLE;
+        return 0;
+}
+
+static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+        struct nop_usb_xceiv *nop;
+
+        if (!x)
+                return -ENODEV;
+
+        nop = xceiv_to_nop(x);
+
+        if (!host) {
+                nop->otg.host = NULL;
+                return -ENODEV;
+        }
+
+        nop->otg.host = host;
+        return 0;
+}
+
+static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
+{
+        struct nop_usb_xceiv    *nop;
+        int err;
+
+        nop = kzalloc(sizeof *nop, GFP_KERNEL);
+        if (!nop)
+                return -ENOMEM;
+
+        nop->dev                = &pdev->dev;
+        nop->otg.dev            = nop->dev;
+        nop->otg.label          = "nop-xceiv";
+        nop->otg.state          = OTG_STATE_UNDEFINED;
+        nop->otg.set_host       = nop_set_host;
+        nop->otg.set_peripheral = nop_set_peripheral;
+        nop->otg.set_suspend    = nop_set_suspend;
+
+        err = otg_set_transceiver(&nop->otg);
+        if (err) {
+                dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+                        err);
+                goto exit;
+        }
+
+        platform_set_drvdata(pdev, nop);
+
+        return 0;
+exit:
+        kfree(nop);
+        return err;
+}
+
+static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
+{
+        struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
+
+        otg_set_transceiver(NULL);
+
+        platform_set_drvdata(pdev, NULL);
+        kfree(nop);
+
+        return 0;
+}
+
+static struct platform_driver nop_usb_xceiv_driver = {
+        .probe          = nop_usb_xceiv_probe,
+        .remove         = __devexit_p(nop_usb_xceiv_remove),
+        .driver         = {
+                .name   = "nop_usb_xceiv",
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init nop_usb_xceiv_init(void)
+{
+        return platform_driver_register(&nop_usb_xceiv_driver);
+}
+subsys_initcall(nop_usb_xceiv_init);
+
+static void __exit nop_usb_xceiv_exit(void)
+{
+        platform_driver_unregister(&nop_usb_xceiv_driver);
+}
+module_exit(nop_usb_xceiv_exit);
+
+MODULE_ALIAS("platform:nop_usb_xceiv");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 416e4410be02..d9478d0e1c8b 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -34,6 +34,8 @@
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
 
 
 /* Register defines */
@@ -246,6 +248,11 @@ struct twl4030_usb {
         struct otg_transceiver  otg;
         struct device           *dev;
 
+        /* TWL4030 internal USB regulator supplies */
+        struct regulator        *usb1v5;
+        struct regulator        *usb1v8;
+        struct regulator        *usb3v1;
+
         /* for vbus reporting with irqs disabled */
         spinlock_t              lock;
 
@@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 
         pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
         if (on) {
+                regulator_enable(twl->usb3v1);
+                regulator_enable(twl->usb1v8);
+                /*
+                 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+                 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+                 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+                 * SLEEP. We work around this by clearing the bit after usv3v1
+                 * is re-activated. This ensures that VUSB3V1 is really active.
+                 */
+                twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
+                                                        VUSB_DEDICATED2);
+                regulator_enable(twl->usb1v5);
                 pwr &= ~PHY_PWR_PHYPWD;
                 WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
                 twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
         } else  {
                 pwr |= PHY_PWR_PHYPWD;
                 WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+                regulator_disable(twl->usb1v5);
+                regulator_disable(twl->usb1v8);
+                regulator_disable(twl->usb3v1);
         }
 }
 
@@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
         twl->asleep = 0;
 }
 
-static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
+static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
         /* Enable writing to power configuration registers */
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
@@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
-        /* turn on 3.1V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP);
+        /* Initialize 3.1V regulator */
+        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+
+        twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
+        if (IS_ERR(twl->usb3v1))
+                return -ENODEV;
+
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
-        /* turn on 1.5V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP);
+        /* Initialize 1.5V regulator */
+        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+
+        twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
+        if (IS_ERR(twl->usb1v5))
+                goto fail1;
+
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
-        /* turn on 1.8V regulator */
-        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP);
+        /* Initialize 1.8V regulator */
+        twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+
+        twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
+        if (IS_ERR(twl->usb1v8))
+                goto fail2;
+
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
         /* disable access to power configuration registers */
         twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
+
+        return 0;
+
+fail2:
+        regulator_put(twl->usb1v5);
+        twl->usb1v5 = NULL;
+fail1:
+        regulator_put(twl->usb3v1);
+        twl->usb3v1 = NULL;
+        return -ENODEV;
 }
 
 static ssize_t twl4030_usb_vbus_show(struct device *dev,
@@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
 {
         struct twl4030_usb_data *pdata = pdev->dev.platform_data;
         struct twl4030_usb      *twl;
-        int                     status;
+        int                     status, err;
 
         if (!pdata) {
                 dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
         /* init spinlock for workqueue */
         spin_lock_init(&twl->lock);
 
-        twl4030_usb_ldo_init(twl);
+        err = twl4030_usb_ldo_init(twl);
+        if (err) {
+                dev_err(&pdev->dev, "ldo init failed\n");
+                kfree(twl);
+                return err;
+        }
         otg_set_transceiver(&twl->otg);
 
         platform_set_drvdata(pdev, twl);
@@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
         twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
         twl4030_phy_power(twl, 0);
+        regulator_put(twl->usb1v5);
+        regulator_put(twl->usb1v8);
+        regulator_put(twl->usb3v1);
 
         kfree(twl);
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index b361f05cafac..a65f9196b0a0 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -116,14 +116,14 @@ config USB_SERIAL_DIGI_ACCELEPORT
           To compile this driver as a module, choose M here: the
           module will be called digi_acceleport.
 
-config USB_SERIAL_CP2101
-        tristate "USB CP2101 UART Bridge Controller"
+config USB_SERIAL_CP210X
+        tristate "USB CP210x family of UART Bridge Controllers"
         help
-          Say Y here if you want to use a CP2101/CP2102 based USB to RS232
-          converter.
+          Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
+          to RS232 converters.
 
           To compile this driver as a module, choose M here: the
-          module will be called cp2101.
+          module will be called cp210x.
 
 config USB_SERIAL_CYPRESS_M8
         tristate "USB Cypress M8 USB Serial Driver"
@@ -472,6 +472,15 @@ config USB_SERIAL_OTI6858
           To compile this driver as a module, choose M here: the
           module will be called oti6858.
 
+config USB_SERIAL_QUALCOMM
+        tristate "USB Qualcomm Serial modem"
+        help
+          Say Y here if you have a Qualcomm USB modem device.  These are
+          usually wireless cellular modems.
+
+          To compile this driver as a module, choose M here: the
+          module will be called qcserial.
+
 config USB_SERIAL_SPCP8X5
         tristate "USB SPCP8x5 USB To Serial Driver"
         help
@@ -515,6 +524,15 @@ config USB_SERIAL_SIERRAWIRELESS
           To compile this driver as a module, choose M here: the
           module will be called sierra.
 
+config USB_SERIAL_SYMBOL
+        tristate "USB Symbol Barcode driver (serial mode)"
+        help
+          Say Y here if you want to use a Symbol USB Barcode device
+          in serial emulation mode.
+
+          To compile this driver as a module, choose M here: the
+          module will be called symbolserial.
+
 config USB_SERIAL_TI
         tristate "USB TI 3410/5052 Serial Driver"
         help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index b75be91eb8f1..66619beb6cc0 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)                += ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)                 += belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CH341)                  += ch341.o
-obj-$(CONFIG_USB_SERIAL_CP2101)                 += cp2101.o
+obj-$(CONFIG_USB_SERIAL_CP210X)                 += cp210x.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)              += cyberjack.o
 obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)             += cypress_m8.o
 obj-$(CONFIG_USB_SERIAL_DEBUG)                  += usb_debug.o
@@ -45,10 +45,12 @@ obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
 obj-$(CONFIG_USB_SERIAL_OPTION)                 += option.o
 obj-$(CONFIG_USB_SERIAL_OTI6858)                += oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)                 += pl2303.o
+obj-$(CONFIG_USB_SERIAL_QUALCOMM)               += qcserial.o
 obj-$(CONFIG_USB_SERIAL_SAFE)                   += safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)            += siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)         += sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)                += spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SYMBOL)                 += symbolserial.o
 obj-$(CONFIG_USB_SERIAL_TI)                     += ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)                  += visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)              += whiteheat.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index f61e3ca64305..ab4cc277aa65 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,5 +1,7 @@
 /*
  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
  *
  * ch341.c implements a serial port driver for the Winchiphead CH341.
  *
@@ -21,9 +23,39 @@
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 
-#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_BAUD_RATE 9600
 #define DEFAULT_TIMEOUT   1000
 
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+   from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI  0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/*******************************/
+/* baudrate calculation factor */
+/*******************************/
+#define CH341_BAUDBASE_FACTOR 1532620800
+#define CH341_BAUDBASE_DIVMAX 3
+
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
-        unsigned baud_rate;
-        u8 dtr;
-        u8 rts;
+        spinlock_t lock; /* access lock */
+        wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
+        unsigned baud_rate; /* set baud rate */
+        u8 line_control; /* set line control value RTS/DTR */
+        u8 line_status; /* active status of modem control inputs */
+        u8 multi_status_change; /* status changed multiple since last call */
 };
 
 static int ch341_control_out(struct usb_device *dev, u8 request,
@@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev,
 {
         short a, b;
         int r;
+        unsigned long factor;
+        short divisor;
 
         dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-        switch (priv->baud_rate) {
-        case 2400:
-                a = 0xd901;
-                b = 0x0038;
-                break;
-        case 4800:
-                a = 0x6402;
-                b = 0x001f;
-                break;
-        case 9600:
-                a = 0xb202;
-                b = 0x0013;
-                break;
-        case 19200:
-                a = 0xd902;
-                b = 0x000d;
-                break;
-        case 38400:
-                a = 0x6403;
-                b = 0x000a;
-                break;
-        case 115200:
-                a = 0xcc03;
-                b = 0x0008;
-                break;
-        default:
+
+        if (!priv->baud_rate)
                 return -EINVAL;
+        factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
+        divisor = CH341_BAUDBASE_DIVMAX;
+
+        while ((factor > 0xfff0) && divisor) {
+                factor >>= 3;
+                divisor--;
         }
 
+        if (factor > 0xfff0)
+                return -EINVAL;
+
+        factor = 0x10000 - factor;
+        a = (factor & 0xff00) | divisor;
+        b = factor & 0xff;
+
         r = ch341_control_out(dev, 0x9a, 0x1312, a);
         if (!r)
                 r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
@@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev,
         return r;
 }
 
-static int ch341_set_handshake(struct usb_device *dev,
-                               struct ch341_private *priv)
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
 {
-        dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
-        return ch341_control_out(dev, 0xa4,
-                ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+        dbg("ch341_set_handshake(0x%02x)", control);
+        return ch341_control_out(dev, 0xa4, ~control, 0);
 }
 
-static int ch341_get_status(struct usb_device *dev)
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
         char *buffer;
         int r;
         const unsigned size = 8;
+        unsigned long flags;
 
         dbg("ch341_get_status()");
 
@@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev)
         if (r < 0)
                 goto out;
 
-        /* Not having the datasheet for the CH341, we ignore the bytes returned
-         * from the device. Return error if the device did not respond in time.
-         */
-        r = 0;
+        /* setup the private status if available */
+        if (r == 2) {
+                r = 0;
+                spin_lock_irqsave(&priv->lock, flags);
+                priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+                priv->multi_status_change = 0;
+                spin_unlock_irqrestore(&priv->lock, flags);
+        } else
+                r = -EPROTO;
 
 out:    kfree(buffer);
         return r;
@@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
                 goto out;
 
         /* expect 0xff 0xee */
-        r = ch341_get_status(dev);
+        r = ch341_get_status(dev, priv);
         if (r < 0)
                 goto out;
 
@@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
         if (r < 0)
                 goto out;
 
-        r = ch341_set_handshake(dev, priv);
+        r = ch341_set_handshake(dev, priv->line_control);
         if (r < 0)
                 goto out;
 
         /* expect 0x9f 0xee */
-        r = ch341_get_status(dev);
+        r = ch341_get_status(dev, priv);
 
 out:    kfree(buffer);
         return r;
@@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial)
         if (!priv)
                 return -ENOMEM;
 
+        spin_lock_init(&priv->lock);
+        init_waitqueue_head(&priv->delta_msr_wait);
         priv->baud_rate = DEFAULT_BAUD_RATE;
-        priv->dtr = 1;
-        priv->rts = 1;
+        priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
         r = ch341_configure(serial->dev, priv);
         if (r < 0)
@@ -231,6 +262,35 @@ error:	kfree(priv);
         return r;
 }
 
+static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
+                                struct file *filp)
+{
+        struct ch341_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int c_cflag;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        /* shutdown our urbs */
+        dbg("%s - shutting down urbs", __func__);
+        usb_kill_urb(port->write_urb);
+        usb_kill_urb(port->read_urb);
+        usb_kill_urb(port->interrupt_in_urb);
+
+        if (tty) {
+                c_cflag = tty->termios->c_cflag;
+                if (c_cflag & HUPCL) {
+                        /* drop DTR and RTS */
+                        spin_lock_irqsave(&priv->lock, flags);
+                        priv->line_control = 0;
+                        spin_unlock_irqrestore(&priv->lock, flags);
+                        ch341_set_handshake(port->serial->dev, 0);
+                }
+        }
+        wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+
 /* open this device, set default parameters */
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
                                 struct file *filp)
@@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
         dbg("ch341_open()");
 
         priv->baud_rate = DEFAULT_BAUD_RATE;
-        priv->dtr = 1;
-        priv->rts = 1;
+        priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
         r = ch341_configure(serial->dev, priv);
         if (r)
                 goto out;
 
-        r = ch341_set_handshake(serial->dev, priv);
+        r = ch341_set_handshake(serial->dev, priv->line_control);
         if (r)
                 goto out;
 
@@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
         if (r)
                 goto out;
 
+        dbg("%s - submitting interrupt urb", __func__);
+        port->interrupt_in_urb->dev = serial->dev;
+        r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+        if (r) {
+                dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+                        " error %d\n", __func__, r);
+                ch341_close(tty, port, NULL);
+                return -EPROTO;
+        }
+
         r = usb_serial_generic_open(tty, port, filp);
 
 out:    return r;
@@ -270,46 +339,224 @@ static void ch341_set_termios(struct tty_struct *tty,
 {
         struct ch341_private *priv = usb_get_serial_port_data(port);
         unsigned baud_rate;
+        unsigned long flags;
 
         dbg("ch341_set_termios()");
 
+        if (!tty || !tty->termios)
+                return;
+
         baud_rate = tty_get_baud_rate(tty);
 
-        switch (baud_rate) {
-        case 2400:
-        case 4800:
-        case 9600:
-        case 19200:
-        case 38400:
-        case 115200:
-                priv->baud_rate = baud_rate;
-                break;
-        default:
-                dbg("Rate %d not supported, using %d",
-                        baud_rate, DEFAULT_BAUD_RATE);
-                priv->baud_rate = DEFAULT_BAUD_RATE;
+        priv->baud_rate = baud_rate;
+
+        if (baud_rate) {
+                spin_lock_irqsave(&priv->lock, flags);
+                priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+                spin_unlock_irqrestore(&priv->lock, flags);
+                ch341_set_baudrate(port->serial->dev, priv);
+        } else {
+                spin_lock_irqsave(&priv->lock, flags);
+                priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+                spin_unlock_irqrestore(&priv->lock, flags);
         }
 
-        ch341_set_baudrate(port->serial->dev, priv);
+        ch341_set_handshake(port->serial->dev, priv->line_control);
 
         /* Unimplemented:
          * (cflag & CSIZE) : data bits [5, 8]
          * (cflag & PARENB) : parity {NONE, EVEN, ODD}
          * (cflag & CSTOPB) : stop bits [1, 2]
          */
+}
+
+static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+                          unsigned int set, unsigned int clear)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct ch341_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 control;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (set & TIOCM_RTS)
+                priv->line_control |= CH341_BIT_RTS;
+        if (set & TIOCM_DTR)
+                priv->line_control |= CH341_BIT_DTR;
+        if (clear & TIOCM_RTS)
+                priv->line_control &= ~CH341_BIT_RTS;
+        if (clear & TIOCM_DTR)
+                priv->line_control &= ~CH341_BIT_DTR;
+        control = priv->line_control;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+        struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+        unsigned char *data = urb->transfer_buffer;
+        unsigned int actual_length = urb->actual_length;
+        int status;
+
+        dbg("%s (%d)", __func__, port->number);
+
+        switch (urb->status) {
+        case 0:
+                /* success */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d", __func__,
+                    urb->status);
+                return;
+        default:
+                dbg("%s - nonzero urb status received: %d", __func__,
+                    urb->status);
+                goto exit;
+        }
 
-         /* Copy back the old hardware settings */
-         tty_termios_copy_hw(tty->termios, old_termios);
-         /* And re-encode with the new baud */
-         tty_encode_baud_rate(tty, baud_rate, baud_rate);
+        usb_serial_debug_data(debug, &port->dev, __func__,
+                              urb->actual_length, urb->transfer_buffer);
+
+        if (actual_length >= 4) {
+                struct ch341_private *priv = usb_get_serial_port_data(port);
+                unsigned long flags;
+
+                spin_lock_irqsave(&priv->lock, flags);
+                priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
+                if ((data[1] & CH341_MULT_STAT))
+                        priv->multi_status_change = 1;
+                spin_unlock_irqrestore(&priv->lock, flags);
+                wake_up_interruptible(&priv->delta_msr_wait);
+        }
+
+exit:
+        status = usb_submit_urb(urb, GFP_ATOMIC);
+        if (status)
+                dev_err(&urb->dev->dev,
+                        "%s - usb_submit_urb failed with result %d\n",
+                        __func__, status);
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+        struct ch341_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 prevstatus;
+        u8 status;
+        u8 changed;
+        u8 multi_change = 0;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        prevstatus = priv->line_status;
+        priv->multi_status_change = 0;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        while (!multi_change) {
+                interruptible_sleep_on(&priv->delta_msr_wait);
+                /* see if a signal did it */
+                if (signal_pending(current))
+                        return -ERESTARTSYS;
+
+                spin_lock_irqsave(&priv->lock, flags);
+                status = priv->line_status;
+                multi_change = priv->multi_status_change;
+                spin_unlock_irqrestore(&priv->lock, flags);
+
+                changed = prevstatus ^ status;
+
+                if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
+                    ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
+                    ((arg & TIOCM_CD)  && (changed & CH341_BIT_DCD)) ||
+                    ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
+                        return 0;
+                }
+                prevstatus = status;
+        }
+
+        return 0;
+}
+
+/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
+static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+                        unsigned int cmd, unsigned long arg)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+        switch (cmd) {
+        case TIOCMIWAIT:
+                dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+                return wait_modem_info(port, arg);
+
+        default:
+                dbg("%s not supported = 0x%04x", __func__, cmd);
+                break;
+        }
+
+        return -ENOIOCTLCMD;
+}
+
+static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct ch341_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 mcr;
+        u8 status;
+        unsigned int result;
+
+        dbg("%s (%d)", __func__, port->number);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        mcr = priv->line_control;
+        status = priv->line_status;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        result = ((mcr & CH341_BIT_DTR)         ? TIOCM_DTR : 0)
+                  | ((mcr & CH341_BIT_RTS)      ? TIOCM_RTS : 0)
+                  | ((status & CH341_BIT_CTS)   ? TIOCM_CTS : 0)
+                  | ((status & CH341_BIT_DSR)   ? TIOCM_DSR : 0)
+                  | ((status & CH341_BIT_RI)    ? TIOCM_RI  : 0)
+                  | ((status & CH341_BIT_DCD)   ? TIOCM_CD  : 0);
+
+        dbg("%s - result = %x", __func__, result);
+
+        return result;
+}
+
+
+static int ch341_reset_resume(struct usb_interface *intf)
+{
+        struct usb_device *dev = interface_to_usbdev(intf);
+        struct usb_serial *serial = NULL;
+        struct ch341_private *priv;
+
+        serial = usb_get_intfdata(intf);
+        priv = usb_get_serial_port_data(serial->port[0]);
+
+        /*reconfigure ch341 serial port after bus-reset*/
+        ch341_configure(dev, priv);
+
+        usb_serial_resume(intf);
+
+        return 0;
 }
 
 static struct usb_driver ch341_driver = {
         .name           = "ch341",
         .probe          = usb_serial_probe,
         .disconnect     = usb_serial_disconnect,
+        .suspend        = usb_serial_suspend,
+        .resume         = usb_serial_resume,
+        .reset_resume   = ch341_reset_resume,
         .id_table       = id_table,
         .no_dynamic_id  = 1,
+        .supports_autosuspend = 1,
 };
 
 static struct usb_serial_driver ch341_device = {
@@ -317,12 +564,17 @@ static struct usb_serial_driver ch341_device = {
                 .owner  = THIS_MODULE,
                 .name   = "ch341-uart",
         },
-        .id_table         = id_table,
-        .usb_driver       = &ch341_driver,
-        .num_ports        = 1,
-        .open             = ch341_open,
-        .set_termios      = ch341_set_termios,
-        .attach           = ch341_attach,
+        .id_table          = id_table,
+        .usb_driver        = &ch341_driver,
+        .num_ports         = 1,
+        .open              = ch341_open,
+        .close             = ch341_close,
+        .ioctl             = ch341_ioctl,
+        .set_termios       = ch341_set_termios,
+        .tiocmget          = ch341_tiocmget,
+        .tiocmset          = ch341_tiocmset,
+        .read_int_callback = ch341_read_int_callback,
+        .attach            = ch341_attach,
 };
 
 static int __init ch341_init(void)
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp210x.c
index 9b4082b58c5b..e8d5133ce9c8 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp210x.c
@@ -11,10 +11,6 @@
  * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
  * control thanks to Munir Nassar nassarmu@real-time.com
  *
- * Outstanding Issues:
- *  Buffers are not flushed when the port is opened.
- *  Multiple calls to write() may fail with "Resource temporarily unavailable"
- *
  */
 
 #include <linux/kernel.h>
@@ -31,7 +27,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.07"
+#define DRIVER_VERSION "v0.08"
 #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
 
 /*
@@ -42,17 +38,21 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
 static void cp2101_cleanup(struct usb_serial_port *);
 static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
                                                         struct file*);
-static void cp2101_get_termios(struct tty_struct *);
+static void cp2101_get_termios(struct tty_struct *,
+        struct usb_serial_port *port);
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+        unsigned int *cflagp, unsigned int *baudp);
 static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
                                                         struct ktermios*);
 static int cp2101_tiocmget(struct tty_struct *, struct file *);
 static int cp2101_tiocmset(struct tty_struct *, struct file *,
                 unsigned int, unsigned int);
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+                unsigned int, unsigned int);
 static void cp2101_break_ctl(struct tty_struct *, int);
 static int cp2101_startup(struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial *);
 
-
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -91,6 +91,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
         { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+        { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -225,7 +226,7 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
         kfree(buf);
 
         if (result != size) {
-                dev_err(&port->dev, "%s - Unable to send config request, "
+                dbg("%s - Unable to send config request, "
                                 "request=0x%x size=%d result=%d\n",
                                 __func__, request, size, result);
                 return -EPROTO;
@@ -276,7 +277,7 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
         kfree(buf);
 
         if ((size > 2 && result != size) || result < 0) {
-                dev_err(&port->dev, "%s - Unable to send request, "
+                dbg("%s - Unable to send request, "
                                 "request=0x%x size=%d result=%d\n",
                                 __func__, request, size, result);
                 return -EPROTO;
@@ -301,6 +302,47 @@ static inline int cp2101_set_config_single(struct usb_serial_port *port,
         return cp2101_set_config(port, request, &data, 2);
 }
 
+/*
+ * cp2101_quantise_baudrate
+ * Quantises the baud rate as per AN205 Table 1
+ */
+static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+        if      (baud <= 56)       baud = 0;
+        else if (baud <= 300)      baud = 300;
+        else if (baud <= 600)      baud = 600;
+        else if (baud <= 1200)     baud = 1200;
+        else if (baud <= 1800)     baud = 1800;
+        else if (baud <= 2400)     baud = 2400;
+        else if (baud <= 4000)     baud = 4000;
+        else if (baud <= 4803)     baud = 4800;
+        else if (baud <= 7207)     baud = 7200;
+        else if (baud <= 9612)     baud = 9600;
+        else if (baud <= 14428)    baud = 14400;
+        else if (baud <= 16062)    baud = 16000;
+        else if (baud <= 19250)    baud = 19200;
+        else if (baud <= 28912)    baud = 28800;
+        else if (baud <= 38601)    baud = 38400;
+        else if (baud <= 51558)    baud = 51200;
+        else if (baud <= 56280)    baud = 56000;
+        else if (baud <= 58053)    baud = 57600;
+        else if (baud <= 64111)    baud = 64000;
+        else if (baud <= 77608)    baud = 76800;
+        else if (baud <= 117028)   baud = 115200;
+        else if (baud <= 129347)   baud = 128000;
+        else if (baud <= 156868)   baud = 153600;
+        else if (baud <= 237832)   baud = 230400;
+        else if (baud <= 254234)   baud = 250000;
+        else if (baud <= 273066)   baud = 256000;
+        else if (baud <= 491520)   baud = 460800;
+        else if (baud <= 567138)   baud = 500000;
+        else if (baud <= 670254)   baud = 576000;
+        else if (baud <= 1053257)  baud = 921600;
+        else if (baud <= 1474560)  baud = 1228800;
+        else if (baud <= 2457600)  baud = 1843200;
+        else                       baud = 3686400;
+        return baud;
+}
+
 static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
                                 struct file *filp)
 {
@@ -331,10 +373,12 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
         }
 
         /* Configure the termios structure */
-        cp2101_get_termios(tty);
+        cp2101_get_termios(tty, port);
 
         /* Set the DTR and RTS pins low */
-        cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+        cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+                        : port,
+                NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
         return 0;
 }
@@ -376,9 +420,31 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios (struct tty_struct *tty)
+static void cp2101_get_termios(struct tty_struct *tty,
+        struct usb_serial_port *port)
+{
+        unsigned int baud;
+
+        if (tty) {
+                cp2101_get_termios_port(tty->driver_data,
+                        &tty->termios->c_cflag, &baud);
+                tty_encode_baud_rate(tty, baud, baud);
+        }
+
+        else {
+                unsigned int cflag;
+                cflag = 0;
+                cp2101_get_termios_port(port, &cflag, &baud);
+        }
+}
+
+/*
+ * cp2101_get_termios_port
+ * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ */
+static void cp2101_get_termios_port(struct usb_serial_port *port,
+        unsigned int *cflagp, unsigned int *baudp)
 {
-        struct usb_serial_port *port = tty->driver_data;
         unsigned int cflag, modem_ctl[4];
         unsigned int baud;
         unsigned int bits;
@@ -388,12 +454,12 @@ static void cp2101_get_termios (struct tty_struct *tty)
         cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
         /* Convert to baudrate */
         if (baud)
-                baud = BAUD_RATE_GEN_FREQ / baud;
+                baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 
         dbg("%s - baud rate = %d", __func__, baud);
+        *baudp = baud;
 
-        tty_encode_baud_rate(tty, baud, baud);
-        cflag = tty->termios->c_cflag;
+        cflag = *cflagp;
 
         cp2101_get_config(port, CP2101_BITS, &bits, 2);
         cflag &= ~CSIZE;
@@ -499,7 +565,7 @@ static void cp2101_get_termios (struct tty_struct *tty)
                 cflag &= ~CRTSCTS;
         }
 
-        tty->termios->c_cflag = cflag;
+        *cflagp = cflag;
 }
 
 static void cp2101_set_termios(struct tty_struct *tty,
@@ -517,46 +583,16 @@ static void cp2101_set_termios(struct tty_struct *tty,
         tty->termios->c_cflag &= ~CMSPAR;
         cflag = tty->termios->c_cflag;
         old_cflag = old_termios->c_cflag;
-        baud = tty_get_baud_rate(tty);
+        baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
 
         /* If the baud rate is to be updated*/
-        if (baud != tty_termios_baud_rate(old_termios)) {
-                switch (baud) {
-                case 0:
-                case 600:
-                case 1200:
-                case 1800:
-                case 2400:
-                case 4800:
-                case 7200:
-                case 9600:
-                case 14400:
-                case 19200:
-                case 28800:
-                case 38400:
-                case 55854:
-                case 57600:
-                case 115200:
-                case 127117:
-                case 230400:
-                case 460800:
-                case 921600:
-                case 3686400:
-                        break;
-                default:
-                        baud = 9600;
-                        break;
-                }
-
-                if (baud) {
-                        dbg("%s - Setting baud rate to %d baud", __func__,
-                                        baud);
-                        if (cp2101_set_config_single(port, CP2101_BAUDRATE,
-                                                (BAUD_RATE_GEN_FREQ / baud))) {
-                                dev_err(&port->dev, "Baud rate requested not "
-                                                "supported by device\n");
-                                baud = tty_termios_baud_rate(old_termios);
-                        }
+        if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
+                dbg("%s - Setting baud rate to %d baud", __func__,
+                                baud);
+                if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+                                        ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
+                        dbg("Baud rate requested not supported by device\n");
+                        baud = tty_termios_baud_rate(old_termios);
                 }
         }
         /* Report back the resulting baud rate */
@@ -588,14 +624,14 @@ static void cp2101_set_termios(struct tty_struct *tty,
                         dbg("%s - data bits = 9", __func__);
                         break;*/
                 default:
-                        dev_err(&port->dev, "cp2101 driver does not "
+                        dbg("cp2101 driver does not "
                                         "support the number of bits requested,"
                                         " using 8 bit mode\n");
                                 bits |= BITS_DATA_8;
                                 break;
                 }
                 if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-                        dev_err(&port->dev, "Number of data bits requested "
+                        dbg("Number of data bits requested "
                                         "not supported by device\n");
         }
 
@@ -612,7 +648,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
                         }
                 }
                 if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-                        dev_err(&port->dev, "Parity mode not supported "
+                        dbg("Parity mode not supported "
                                         "by device\n");
         }
 
@@ -627,7 +663,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
                         dbg("%s - stop bits = 1", __func__);
                 }
                 if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
-                        dev_err(&port->dev, "Number of stop bits requested "
+                        dbg("Number of stop bits requested "
                                         "not supported by device\n");
         }
 
@@ -661,6 +697,12 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
                 unsigned int set, unsigned int clear)
 {
         struct usb_serial_port *port = tty->driver_data;
+        return cp2101_tiocmset_port(port, file, set, clear);
+}
+
+static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+                unsigned int set, unsigned int clear)
+{
         unsigned int control = 0;
 
         dbg("%s - port %d", __func__, port->number);
@@ -685,7 +727,6 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
         dbg("%s - control = 0x%.4x", __func__, control);
 
         return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
-
 }
 
 static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ae84c326a540..dcc87aaa8628 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1938,18 +1938,16 @@ static void ftdi_process_read(struct work_struct *work)
                 /* Compare new line status to the old one, signal if different/
                    N.B. packet may be processed more than once, but differences
                    are only processed once.  */
-                if (priv != NULL) {
-                        char new_status = data[packet_offset + 0] &
-                                                        FTDI_STATUS_B0_MASK;
-                        if (new_status != priv->prev_status) {
-                                priv->diff_status |=
-                                        new_status ^ priv->prev_status;
-                                wake_up_interruptible(&priv->delta_msr_wait);
-                                priv->prev_status = new_status;
-                        }
+                char new_status = data[packet_offset + 0] &
+                                                FTDI_STATUS_B0_MASK;
+                if (new_status != priv->prev_status) {
+                        priv->diff_status |=
+                                new_status ^ priv->prev_status;
+                        wake_up_interruptible(&priv->delta_msr_wait);
+                        priv->prev_status = new_status;
                 }
 
-                length = min(PKTSZ, urb->actual_length-packet_offset)-2;
+                length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
                 if (length < 0) {
                         dev_err(&port->dev, "%s - bad packet length: %d\n",
                                 __func__, length+2);
@@ -2294,11 +2292,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
                            FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
                            0, 0,
                            buf, 1, WDR_TIMEOUT);
-                if (ret < 0) {
-                        dbg("%s Could not get modem status of device - err: %d", __func__,
-                            ret);
+                if (ret < 0)
                         return ret;
-                }
                 break;
         case FT8U232AM:
         case FT232BM:
@@ -2313,15 +2308,11 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
                                    FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
                                    0, priv->interface,
                                    buf, 2, WDR_TIMEOUT);
-                if (ret < 0) {
-                        dbg("%s Could not get modem status of device - err: %d", __func__,
-                            ret);
+                if (ret < 0)
                         return ret;
-                }
                 break;
         default:
                 return -EFAULT;
-                break;
         }
 
         return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 814909f1ee63..9d57cace3731 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -177,14 +177,6 @@ int usb_serial_generic_resume(struct usb_serial *serial)
         struct usb_serial_port *port;
         int i, c = 0, r;
 
-#ifdef CONFIG_PM
-        /*
-         * If this is an autoresume, don't submit URBs.
-         * They will be submitted in the open function instead.
-         */
-        if (serial->dev->auto_pm)
-                return 0;
-#endif
         for (i = 0; i < serial->num_ports; i++) {
                 port = serial->port[i];
                 if (port->port.count && port->read_urb) {
@@ -196,6 +188,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 
         return c ? -EIO : 0;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
 
 void usb_serial_generic_close(struct tty_struct *tty,
                         struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 132be74d2b89..ef92095b0732 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -78,6 +78,7 @@ static int  ipaq_open(struct tty_struct *tty,
                         struct usb_serial_port *port, struct file *filp);
 static void ipaq_close(struct tty_struct *tty,
                         struct usb_serial_port *port, struct file *filp);
+static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
 static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -572,15 +573,10 @@ static struct usb_serial_driver ipaq_device = {
         .description =          "PocketPC PDA",
         .usb_driver =           &ipaq_driver,
         .id_table =             ipaq_id_table,
-        /*
-         * some devices have an extra endpoint, which
-         * must be ignored as it would make the core
-         * create a second port which oopses when used
-         */
-        .num_ports =            1,
         .open =                 ipaq_open,
         .close =                ipaq_close,
         .attach =               ipaq_startup,
+        .calc_num_ports =       ipaq_calc_num_ports,
         .shutdown =             ipaq_shutdown,
         .write =                ipaq_write,
         .write_room =           ipaq_write_room,
@@ -956,14 +952,49 @@ static void ipaq_destroy_lists(struct usb_serial_port *port)
 }
 
 
+static int ipaq_calc_num_ports(struct usb_serial *serial)
+{
+        /*
+         * some devices have 3 endpoints, the 3rd of which
+         * must be ignored as it would make the core
+         * create a second port which oopses when used
+         */
+        int ipaq_num_ports = 1;
+
+        dbg("%s - numberofendpoints: %d", __FUNCTION__,
+                (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+
+        /*
+         * a few devices have 4 endpoints, seemingly Yakuma devices,
+         * and we need the second pair, so let them have 2 ports
+         *
+         * TODO: can we drop port 1 ?
+         */
+        if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) {
+                ipaq_num_ports = 2;
+        }
+
+        return ipaq_num_ports;
+}
+
+
 static int ipaq_startup(struct usb_serial *serial)
 {
         dbg("%s", __func__);
         if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+                /*
+                 * FIXME: HP iPaq rx3715, possibly others, have 1 config that
+                 * is labeled as 2
+                 */
+
                 dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
                         serial->dev->actconfig->desc.bConfigurationValue);
                 return -ENODEV;
         }
+
+        dbg("%s - iPAQ module configured for %d ports",
+                __FUNCTION__, serial->num_ports);
+
         return usb_reset_configuration(serial->dev);
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 9878c0fb3859..00daa8f7759a 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1507,7 +1507,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
         } else {
                 dev_warn(&serial->interface->dev,
                          "unsupported endpoint type %x\n",
-                         ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+                         usb_endpoint_type(ep_desc));
                 usb_free_urb(urb);
                 return NULL;
         }
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cea326f1f105..839583dc8b6a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,8 +1,8 @@
 /*
  * Opticon USB barcode to serial driver
  *
- * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- * Copyright (C) 2008 Novell Inc.
+ * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2008 - 2009 Novell Inc.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License version
@@ -14,6 +14,7 @@
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
+#include <linux/serial.h>
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -40,8 +41,12 @@ struct opticon_private {
         bool throttled;
         bool actually_throttled;
         bool rts;
+        int outstanding_urbs;
 };
 
+/* max number of write urbs in flight */
+#define URB_UPPER_LIMIT 4
+
 static void opticon_bulk_callback(struct urb *urb)
 {
         struct opticon_private *priv = urb->context;
@@ -106,7 +111,6 @@ static void opticon_bulk_callback(struct urb *urb)
                                         priv->rts = false;
                                 else
                                         priv->rts = true;
-                                /* FIXME change the RTS level */
                         } else {
                         dev_dbg(&priv->udev->dev,
                                 "Unknown data packet received from the device:"
@@ -188,6 +192,120 @@ static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
         usb_kill_urb(priv->bulk_read_urb);
 }
 
+static void opticon_write_bulk_callback(struct urb *urb)
+{
+        struct opticon_private *priv = urb->context;
+        int status = urb->status;
+        unsigned long flags;
+
+        /* free up the transfer buffer, as usb_free_urb() does not do this */
+        kfree(urb->transfer_buffer);
+
+        if (status)
+                dbg("%s - nonzero write bulk status received: %d",
+                    __func__, status);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        --priv->outstanding_urbs;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        usb_serial_port_softint(priv->port);
+}
+
+static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
+                         const unsigned char *buf, int count)
+{
+        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        struct usb_serial *serial = port->serial;
+        struct urb *urb;
+        unsigned char *buffer;
+        unsigned long flags;
+        int status;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
+                spin_unlock_irqrestore(&priv->lock, flags);
+                dbg("%s - write limit hit\n", __func__);
+                return 0;
+        }
+        priv->outstanding_urbs++;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        buffer = kmalloc(count, GFP_ATOMIC);
+        if (!buffer) {
+                dev_err(&port->dev, "out of memory\n");
+                count = -ENOMEM;
+                goto error_no_buffer;
+        }
+
+        urb = usb_alloc_urb(0, GFP_ATOMIC);
+        if (!urb) {
+                dev_err(&port->dev, "no more free urbs\n");
+                count = -ENOMEM;
+                goto error_no_urb;
+        }
+
+        memcpy(buffer, buf, count);
+
+        usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+
+        usb_fill_bulk_urb(urb, serial->dev,
+                          usb_sndbulkpipe(serial->dev,
+                                          port->bulk_out_endpointAddress),
+                          buffer, count, opticon_write_bulk_callback, priv);
+
+        /* send it down the pipe */
+        status = usb_submit_urb(urb, GFP_ATOMIC);
+        if (status) {
+                dev_err(&port->dev,
+                   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+                                                        __func__, status);
+                count = status;
+                goto error;
+        }
+
+        /* we are done with this urb, so let the host driver
+         * really free it when it is finished with it */
+        usb_free_urb(urb);
+
+        return count;
+error:
+        usb_free_urb(urb);
+error_no_urb:
+        kfree(buffer);
+error_no_buffer:
+        spin_lock_irqsave(&priv->lock, flags);
+        --priv->outstanding_urbs;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        return count;
+}
+
+static int opticon_write_room(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        unsigned long flags;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        /*
+         * We really can take almost anything the user throws at us
+         * but let's pick a nice big number to tell the tty
+         * layer that we have lots of free space, unless we don't.
+         */
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+                spin_unlock_irqrestore(&priv->lock, flags);
+                dbg("%s - write limit hit\n", __func__);
+                return 0;
+        }
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return 2048;
+}
+
 static void opticon_throttle(struct tty_struct *tty)
 {
         struct usb_serial_port *port = tty->driver_data;
@@ -223,6 +341,67 @@ static void opticon_unthrottle(struct tty_struct *tty)
                                                         __func__, result);
 }
 
+static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct opticon_private *priv = usb_get_serial_data(port->serial);
+        unsigned long flags;
+        int result = 0;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->rts)
+                result = TIOCM_RTS;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        dbg("%s - %x", __func__, result);
+        return result;
+}
+
+static int get_serial_info(struct opticon_private *priv,
+                           struct serial_struct __user *serial)
+{
+        struct serial_struct tmp;
+
+        if (!serial)
+                return -EFAULT;
+
+        memset(&tmp, 0x00, sizeof(tmp));
+
+        /* fake emulate a 16550 uart to make userspace code happy */
+        tmp.type                = PORT_16550A;
+        tmp.line                = priv->serial->minor;
+        tmp.port                = 0;
+        tmp.irq                 = 0;
+        tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+        tmp.xmit_fifo_size      = 1024;
+        tmp.baud_base           = 9600;
+        tmp.close_delay         = 5*HZ;
+        tmp.closing_wait        = 30*HZ;
+
+        if (copy_to_user(serial, &tmp, sizeof(*serial)))
+                return -EFAULT;
+        return 0;
+}
+
+static int opticon_ioctl(struct tty_struct *tty, struct file *file,
+                         unsigned int cmd, unsigned long arg)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct opticon_private *priv = usb_get_serial_data(port->serial);
+
+        dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+
+        switch (cmd) {
+        case TIOCGSERIAL:
+                return get_serial_info(priv,
+                                       (struct serial_struct __user *)arg);
+        }
+
+        return -ENOIOCTLCMD;
+}
+
 static int opticon_startup(struct usb_serial *serial)
 {
         struct opticon_private *priv;
@@ -306,11 +485,37 @@ static void opticon_shutdown(struct usb_serial *serial)
         usb_set_serial_data(serial, NULL);
 }
 
+static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+        struct usb_serial *serial = usb_get_intfdata(intf);
+        struct opticon_private *priv = usb_get_serial_data(serial);
+
+        usb_kill_urb(priv->bulk_read_urb);
+        return 0;
+}
+
+static int opticon_resume(struct usb_interface *intf)
+{
+        struct usb_serial *serial = usb_get_intfdata(intf);
+        struct opticon_private *priv = usb_get_serial_data(serial);
+        struct usb_serial_port *port = serial->port[0];
+        int result;
+
+        mutex_lock(&port->mutex);
+        if (port->port.count)
+                result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
+        else
+                result = 0;
+        mutex_unlock(&port->mutex);
+        return result;
+}
 
 static struct usb_driver opticon_driver = {
         .name =         "opticon",
         .probe =        usb_serial_probe,
         .disconnect =   usb_serial_disconnect,
+        .suspend =      opticon_suspend,
+        .resume =       opticon_resume,
         .id_table =     id_table,
         .no_dynamic_id =        1,
 };
@@ -326,9 +531,13 @@ static struct usb_serial_driver opticon_device = {
         .attach =               opticon_startup,
         .open =                 opticon_open,
         .close =                opticon_close,
+        .write =                opticon_write,
+        .write_room =           opticon_write_room,
         .shutdown =             opticon_shutdown,
         .throttle =             opticon_throttle,
         .unthrottle =           opticon_unthrottle,
+        .ioctl =                opticon_ioctl,
+        .tiocmget =             opticon_tiocmget,
 };
 
 static int __init opticon_init(void)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61ebddc48497..d560c0b54e6e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -62,6 +62,8 @@ static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
                                 unsigned int set, unsigned int clear);
 static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int  option_suspend(struct usb_serial *serial, pm_message_t message);
+static int  option_resume(struct usb_serial *serial);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID                        0x0AF0
@@ -523,6 +525,8 @@ static struct usb_driver option_driver = {
         .name       = "option",
         .probe      = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
+        .suspend    = usb_serial_suspend,
+        .resume     = usb_serial_resume,
         .id_table   = option_ids,
         .no_dynamic_id =        1,
 };
@@ -551,6 +555,8 @@ static struct usb_serial_driver option_1port_device = {
         .attach            = option_startup,
         .shutdown          = option_shutdown,
         .read_int_callback = option_instat_callback,
+        .suspend           = option_suspend,
+        .resume            = option_resume,
 };
 
 static int debug;
@@ -821,10 +827,10 @@ static void option_instat_callback(struct urb *urb)
                                 req_pkt->bRequestType, req_pkt->bRequest);
                 }
         } else
-                dbg("%s: error %d", __func__, status);
+                err("%s: error %d", __func__, status);
 
         /* Resubmit urb so we continue receiving IRQ data */
-        if (status != -ESHUTDOWN) {
+        if (status != -ESHUTDOWN && status != -ENOENT) {
                 urb->dev = serial->dev;
                 err = usb_submit_urb(urb, GFP_ATOMIC);
                 if (err)
@@ -843,7 +849,6 @@ static int option_write_room(struct tty_struct *tty)
 
         portdata = usb_get_serial_port_data(port);
 
-
         for (i = 0; i < N_OUT_URB; i++) {
                 this_urb = portdata->out_urbs[i];
                 if (this_urb && !test_bit(i, &portdata->out_busy))
@@ -1105,14 +1110,12 @@ bail_out_error:
         return 1;
 }
 
-static void option_shutdown(struct usb_serial *serial)
+static void stop_read_write_urbs(struct usb_serial *serial)
 {
         int i, j;
         struct usb_serial_port *port;
         struct option_port_private *portdata;
 
-        dbg("%s", __func__);
-
         /* Stop reading/writing urbs */
         for (i = 0; i < serial->num_ports; ++i) {
                 port = serial->port[i];
@@ -1122,6 +1125,17 @@ static void option_shutdown(struct usb_serial *serial)
                 for (j = 0; j < N_OUT_URB; j++)
                         usb_kill_urb(portdata->out_urbs[j]);
         }
+}
+
+static void option_shutdown(struct usb_serial *serial)
+{
+        int i, j;
+        struct usb_serial_port *port;
+        struct option_port_private *portdata;
+
+        dbg("%s", __func__);
+
+        stop_read_write_urbs(serial);
 
         /* Now free them */
         for (i = 0; i < serial->num_ports; ++i) {
@@ -1152,6 +1166,66 @@ static void option_shutdown(struct usb_serial *serial)
         }
 }
 
+static int option_suspend(struct usb_serial *serial, pm_message_t message)
+{
+        dbg("%s entered", __func__);
+        stop_read_write_urbs(serial);
+
+        return 0;
+}
+
+static int option_resume(struct usb_serial *serial)
+{
+        int err, i, j;
+        struct usb_serial_port *port;
+        struct urb *urb;
+        struct option_port_private *portdata;
+
+        dbg("%s entered", __func__);
+        /* get the interrupt URBs resubmitted unconditionally */
+        for (i = 0; i < serial->num_ports; i++) {
+                port = serial->port[i];
+                if (!port->interrupt_in_urb) {
+                        dbg("%s: No interrupt URB for port %d\n", __func__, i);
+                        continue;
+                }
+                port->interrupt_in_urb->dev = serial->dev;
+                err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+                dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+                if (err < 0) {
+                        err("%s: Error %d for interrupt URB of port%d",
+                                 __func__, err, i);
+                        return err;
+                }
+        }
+
+        for (i = 0; i < serial->num_ports; i++) {
+                /* walk all ports */
+                port = serial->port[i];
+                portdata = usb_get_serial_port_data(port);
+                mutex_lock(&port->mutex);
+
+                /* skip closed ports */
+                if (!port->port.count) {
+                        mutex_unlock(&port->mutex);
+                        continue;
+                }
+
+                for (j = 0; j < N_IN_URB; j++) {
+                        urb = portdata->in_urbs[j];
+                        err = usb_submit_urb(urb, GFP_NOIO);
+                        if (err < 0) {
+                                mutex_unlock(&port->mutex);
+                                err("%s: Error %d for bulk URB %d",
+                                         __func__, err, i);
+                                return err;
+                        }
+                }
+                mutex_unlock(&port->mutex);
+        }
+        return 0;
+}
+
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
new file mode 100644
index 000000000000..e6d6b0c17fd9
--- /dev/null
+++ b/drivers/usb/serial/qcserial.c
@@ -0,0 +1,147 @@
+/*
+ * Qualcomm Serial USB driver
+ *
+ *      Copyright (c) 2008 QUALCOMM Incorporated.
+ *      Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ *      Copyright (c) 2009 Novell Inc.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License version
+ *      2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Qualcomm Inc"
+#define DRIVER_DESC "Qualcomm USB Serial driver"
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+        {USB_DEVICE(0x05c6, 0x9211)},   /* Acer Gobi QDL device */
+        {USB_DEVICE(0x05c6, 0x9212)},   /* Acer Gobi Modem Device */
+        {USB_DEVICE(0x03f0, 0x1f1d)},   /* HP un2400 Gobi Modem Device */
+        {USB_DEVICE(0x03f0, 0x201d)},   /* HP un2400 Gobi QDL Device */
+        { }                             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcdriver = {
+        .name                   = "qcserial",
+        .probe                  = usb_serial_probe,
+        .disconnect             = usb_serial_disconnect,
+        .id_table               = id_table,
+        .suspend                = usb_serial_suspend,
+        .resume                 = usb_serial_resume,
+        .supports_autosuspend   = true,
+};
+
+static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+        int retval = -ENODEV;
+        __u8 nintf;
+        __u8 ifnum;
+
+        dbg("%s", __func__);
+
+        nintf = serial->dev->actconfig->desc.bNumInterfaces;
+        dbg("Num Interfaces = %d", nintf);
+        ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+        dbg("This Interface = %d", ifnum);
+
+        switch (nintf) {
+        case 1:
+                /* QDL mode */
+                if (serial->interface->num_altsetting == 2) {
+                        struct usb_host_interface *intf;
+
+                        intf = &serial->interface->altsetting[1];
+                        if (intf->desc.bNumEndpoints == 2) {
+                                if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+                                    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+                                        dbg("QDL port found");
+                                        retval = usb_set_interface(serial->dev, ifnum, 1);
+                                        if (retval < 0) {
+                                                dev_err(&serial->dev->dev,
+                                                        "Could not set interface, error %d\n",
+                                                        retval);
+                                                retval = -ENODEV;
+                                        }
+                                        return retval;
+                                }
+                        }
+                }
+                break;
+
+        case 4:
+                /* Composite mode */
+                if (ifnum == 2) {
+                        dbg("Modem port found");
+                        retval = usb_set_interface(serial->dev, ifnum, 0);
+                        if (retval < 0) {
+                                dev_err(&serial->dev->dev,
+                                        "Could not set interface, error %d\n",
+                                        retval);
+                                retval = -ENODEV;
+                        }
+                        return retval;
+                }
+                break;
+
+        default:
+                dev_err(&serial->dev->dev,
+                        "unknown number of interfaces: %d\n", nintf);
+                return -ENODEV;
+        }
+
+        return retval;
+}
+
+static struct usb_serial_driver qcdevice = {
+        .driver = {
+                .owner     = THIS_MODULE,
+                .name      = "qcserial",
+        },
+        .description         = "Qualcomm USB modem",
+        .id_table            = id_table,
+        .usb_driver          = &qcdriver,
+        .num_ports           = 1,
+        .probe               = qcprobe,
+};
+
+static int __init qcinit(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&qcdevice);
+        if (retval)
+                return retval;
+
+        retval = usb_register(&qcdriver);
+        if (retval) {
+                usb_serial_deregister(&qcdevice);
+                return retval;
+        }
+
+        return 0;
+}
+
+static void __exit qcexit(void)
+{
+        usb_deregister(&qcdriver);
+        usb_serial_deregister(&qcdevice);
+}
+
+module_init(qcinit);
+module_exit(qcexit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
new file mode 100644
index 000000000000..8b3cbc87adc7
--- /dev/null
+++ b/drivers/usb/serial/symbolserial.c
@@ -0,0 +1,399 @@
+/*
+ * Symbol USB barcode to serial driver
+ *
+ * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2009 Novell Inc.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License version
+ *      2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+        { USB_DEVICE(0x05e0, 0x0600) },
+        { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the individual device information */
+struct symbol_private {
+        struct usb_device *udev;
+        struct usb_serial *serial;
+        struct usb_serial_port *port;
+        unsigned char *int_buffer;
+        struct urb *int_urb;
+        int buffer_size;
+        u8 bInterval;
+        u8 int_address;
+        spinlock_t lock;        /* protects the following flags */
+        bool throttled;
+        bool actually_throttled;
+        bool rts;
+};
+
+static void symbol_int_callback(struct urb *urb)
+{
+        struct symbol_private *priv = urb->context;
+        unsigned char *data = urb->transfer_buffer;
+        struct usb_serial_port *port = priv->port;
+        int status = urb->status;
+        struct tty_struct *tty;
+        int result;
+        int available_room = 0;
+        int data_length;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        switch (status) {
+        case 0:
+                /* success */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d",
+                    __func__, status);
+                return;
+        default:
+                dbg("%s - nonzero urb status received: %d",
+                    __func__, status);
+                goto exit;
+        }
+
+        usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,
+                              data);
+
+        if (urb->actual_length > 1) {
+                data_length = urb->actual_length - 1;
+
+                /*
+                 * Data from the device comes with a 1 byte header:
+                 *
+                 * <size of data>data...
+                 *      This is real data to be sent to the tty layer
+                 * we pretty much just ignore the size and send everything
+                 * else to the tty layer.
+                 */
+                tty = tty_port_tty_get(&port->port);
+                if (tty) {
+                        available_room = tty_buffer_request_room(tty,
+                                                        data_length);
+                        if (available_room) {
+                                tty_insert_flip_string(tty, &data[1],
+                                                       available_room);
+                                tty_flip_buffer_push(tty);
+                        }
+                        tty_kref_put(tty);
+                }
+        } else {
+                dev_dbg(&priv->udev->dev,
+                        "Improper ammount of data received from the device, "
+                        "%d bytes", urb->actual_length);
+        }
+
+exit:
+        spin_lock(&priv->lock);
+
+        /* Continue trying to always read if we should */
+        if (!priv->throttled) {
+                usb_fill_int_urb(priv->int_urb, priv->udev,
+                                 usb_rcvintpipe(priv->udev,
+                                                priv->int_address),
+                                 priv->int_buffer, priv->buffer_size,
+                                 symbol_int_callback, priv, priv->bInterval);
+                result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+                if (result)
+                        dev_err(&port->dev,
+                            "%s - failed resubmitting read urb, error %d\n",
+                                                        __func__, result);
+        } else
+                priv->actually_throttled = true;
+        spin_unlock(&priv->lock);
+}
+
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
+                        struct file *filp)
+{
+        struct symbol_private *priv = usb_get_serial_data(port->serial);
+        unsigned long flags;
+        int result = 0;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        priv->throttled = false;
+        priv->actually_throttled = false;
+        priv->port = port;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        /*
+         * Force low_latency on so that our tty_push actually forces the data
+         * through, otherwise it is scheduled, and with high data rates (like
+         * with OHCI) data can get lost.
+         */
+        if (tty)
+                tty->low_latency = 1;
+
+        /* Start reading from the device */
+        usb_fill_int_urb(priv->int_urb, priv->udev,
+                         usb_rcvintpipe(priv->udev, priv->int_address),
+                         priv->int_buffer, priv->buffer_size,
+                         symbol_int_callback, priv, priv->bInterval);
+        result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+        if (result)
+                dev_err(&port->dev,
+                        "%s - failed resubmitting read urb, error %d\n",
+                        __func__, result);
+        return result;
+}
+
+static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
+                          struct file *filp)
+{
+        struct symbol_private *priv = usb_get_serial_data(port->serial);
+
+        dbg("%s - port %d", __func__, port->number);
+
+        /* shutdown our urbs */
+        usb_kill_urb(priv->int_urb);
+}
+
+static void symbol_throttle(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct symbol_private *priv = usb_get_serial_data(port->serial);
+        unsigned long flags;
+
+        dbg("%s - port %d", __func__, port->number);
+        spin_lock_irqsave(&priv->lock, flags);
+        priv->throttled = true;
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void symbol_unthrottle(struct tty_struct *tty)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct symbol_private *priv = usb_get_serial_data(port->serial);
+        unsigned long flags;
+        int result;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        spin_lock_irqsave(&priv->lock, flags);
+        priv->throttled = false;
+        priv->actually_throttled = false;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        priv->int_urb->dev = port->serial->dev;
+        result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+        if (result)
+                dev_err(&port->dev,
+                        "%s - failed submitting read urb, error %d\n",
+                                                        __func__, result);
+}
+
+static int symbol_ioctl(struct tty_struct *tty, struct file *file,
+                        unsigned int cmd, unsigned long arg)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct device *dev = &port->dev;
+
+        /*
+         * Right now we need to figure out what commands
+         * most userspace tools want to see for this driver,
+         * so just log the things.
+         */
+        switch (cmd) {
+        case TIOCSERGETLSR:
+                dev_info(dev, "%s: TIOCSERGETLSR\n", __func__);
+                break;
+
+        case TIOCGSERIAL:
+                dev_info(dev, "%s: TIOCGSERIAL\n", __func__);
+                break;
+
+        case TIOCMIWAIT:
+                dev_info(dev, "%s: TIOCMIWAIT\n", __func__);
+                break;
+
+        case TIOCGICOUNT:
+                dev_info(dev, "%s: TIOCGICOUNT\n", __func__);
+                break;
+        default:
+                dev_info(dev, "%s: unknown (%d)\n", __func__, cmd);
+        }
+        return -ENOIOCTLCMD;
+}
+
+static int symbol_tiocmget(struct tty_struct *tty, struct file *file)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct device *dev = &port->dev;
+
+        /* TODO */
+        /* probably just need to shadow whatever was sent to us here */
+        dev_info(dev, "%s\n", __func__);
+        return 0;
+}
+
+static int symbol_tiocmset(struct tty_struct *tty, struct file *file,
+                           unsigned int set, unsigned int clear)
+{
+        struct usb_serial_port *port = tty->driver_data;
+        struct device *dev = &port->dev;
+
+        /* TODO */
+        /* probably just need to shadow whatever was sent to us here */
+        dev_info(dev, "%s\n", __func__);
+        return 0;
+}
+
+static int symbol_startup(struct usb_serial *serial)
+{
+        struct symbol_private *priv;
+        struct usb_host_interface *intf;
+        int i;
+        int retval = -ENOMEM;
+        bool int_in_found = false;
+
+        /* create our private serial structure */
+        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+        if (priv == NULL) {
+                dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+                return -ENOMEM;
+        }
+        spin_lock_init(&priv->lock);
+        priv->serial = serial;
+        priv->port = serial->port[0];
+        priv->udev = serial->dev;
+
+        /* find our interrupt endpoint */
+        intf = serial->interface->altsetting;
+        for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
+                struct usb_endpoint_descriptor *endpoint;
+
+                endpoint = &intf->endpoint[i].desc;
+                if (!usb_endpoint_is_int_in(endpoint))
+                        continue;
+
+                priv->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+                if (!priv->int_urb) {
+                        dev_err(&priv->udev->dev, "out of memory\n");
+                        goto error;
+                }
+
+                priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+                priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
+                if (!priv->int_buffer) {
+                        dev_err(&priv->udev->dev, "out of memory\n");
+                        goto error;
+                }
+
+                priv->int_address = endpoint->bEndpointAddress;
+                priv->bInterval = endpoint->bInterval;
+
+                /* set up our int urb */
+                usb_fill_int_urb(priv->int_urb, priv->udev,
+                                 usb_rcvintpipe(priv->udev,
+                                                endpoint->bEndpointAddress),
+                                 priv->int_buffer, priv->buffer_size,
+                                 symbol_int_callback, priv, priv->bInterval);
+
+                int_in_found = true;
+                break;
+                }
+
+        if (!int_in_found) {
+                dev_err(&priv->udev->dev,
+                        "Error - the proper endpoints were not found!\n");
+                goto error;
+        }
+
+        usb_set_serial_data(serial, priv);
+        return 0;
+
+error:
+        usb_free_urb(priv->int_urb);
+        kfree(priv->int_buffer);
+        kfree(priv);
+        return retval;
+}
+
+static void symbol_shutdown(struct usb_serial *serial)
+{
+        struct symbol_private *priv = usb_get_serial_data(serial);
+
+        dbg("%s", __func__);
+
+        usb_kill_urb(priv->int_urb);
+        usb_free_urb(priv->int_urb);
+        kfree(priv->int_buffer);
+        kfree(priv);
+        usb_set_serial_data(serial, NULL);
+}
+
+static struct usb_driver symbol_driver = {
+        .name =                 "symbol",
+        .probe =                usb_serial_probe,
+        .disconnect =           usb_serial_disconnect,
+        .id_table =             id_table,
+        .no_dynamic_id =        1,
+};
+
+static struct usb_serial_driver symbol_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "symbol",
+        },
+        .id_table =             id_table,
+        .usb_driver =           &symbol_driver,
+        .num_ports =            1,
+        .attach =               symbol_startup,
+        .open =                 symbol_open,
+        .close =                symbol_close,
+        .shutdown =             symbol_shutdown,
+        .throttle =             symbol_throttle,
+        .unthrottle =           symbol_unthrottle,
+        .ioctl =                symbol_ioctl,
+        .tiocmget =             symbol_tiocmget,
+        .tiocmset =             symbol_tiocmset,
+};
+
+static int __init symbol_init(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&symbol_device);
+        if (retval)
+                return retval;
+        retval = usb_register(&symbol_driver);
+        if (retval)
+                usb_serial_deregister(&symbol_device);
+        return retval;
+}
+
+static void __exit symbol_exit(void)
+{
+        usb_deregister(&symbol_driver);
+        usb_serial_deregister(&symbol_device);
+}
+
+module_init(symbol_init);
+module_exit(symbol_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cfcfd5ab06ce..742a5bc44be8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -204,6 +204,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
                 goto bailout_kref_put;
         }
 
+        if (port->serial->disconnected) {
+                retval = -ENODEV;
+                goto bailout_kref_put;
+        }
+
         if (mutex_lock_interruptible(&port->mutex)) {
                 retval = -ERESTARTSYS;
                 goto bailout_kref_put;
@@ -1067,6 +1072,8 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
         struct usb_serial_port *port;
         int i, r = 0;
 
+        serial->suspending = 1;
+
         for (i = 0; i < serial->num_ports; ++i) {
                 port = serial->port[i];
                 if (port)
@@ -1083,10 +1090,15 @@ EXPORT_SYMBOL(usb_serial_suspend);
 int usb_serial_resume(struct usb_interface *intf)
 {
         struct usb_serial *serial = usb_get_intfdata(intf);
+        int rv;
 
+        serial->suspending = 0;
         if (serial->type->resume)
-                return serial->type->resume(serial);
-        return 0;
+                rv = serial->type->resume(serial);
+        else
+                rv = usb_serial_generic_resume(serial);
+
+        return rv;
 }
 EXPORT_SYMBOL(usb_serial_resume);
 
@@ -1222,7 +1234,6 @@ static void fixup_generic(struct usb_serial_driver *device)
         set_to_generic_if_null(device, read_bulk_callback);
         set_to_generic_if_null(device, write_bulk_callback);
         set_to_generic_if_null(device, shutdown);
-        set_to_generic_if_null(device, resume);
 }
 
 int usb_serial_register(struct usb_serial_driver *driver)
@@ -1230,6 +1241,9 @@ int usb_serial_register(struct usb_serial_driver *driver)
         /* must be called with BKL held */
         int retval;
 
+        if (usb_disabled())
+                return -ENODEV;
+
         fixup_generic(driver);
 
         if (!driver->description)
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 9df6887b91f6..8a372bac0e43 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,8 +2,8 @@
 # USB Storage driver configuration
 #
 
-comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;"
-comment "see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
         depends on USB
 
 config USB_STORAGE
@@ -32,21 +32,25 @@ config USB_STORAGE_DEBUG
           verbose debugging messages.
 
 config USB_STORAGE_DATAFAB
-        bool "Datafab Compact Flash Reader support"
+        tristate "Datafab Compact Flash Reader support"
         depends on USB_STORAGE
         help
           Support for certain Datafab CompactFlash readers.
           Datafab has a web page at <http://www.datafabusa.com/>.
 
+          If this driver is compiled as a module, it will be named ums-datafab.
+
 config USB_STORAGE_FREECOM
-        bool "Freecom USB/ATAPI Bridge support"
+        tristate "Freecom USB/ATAPI Bridge support"
         depends on USB_STORAGE
         help
           Support for the Freecom USB to IDE/ATAPI adaptor.
           Freecom has a web page at <http://www.freecom.de/>.
 
+          If this driver is compiled as a module, it will be named ums-freecom.
+
 config USB_STORAGE_ISD200
-        bool "ISD-200 USB/ATA Bridge support"
+        tristate "ISD-200 USB/ATA Bridge support"
         depends on USB_STORAGE
         ---help---
           Say Y here if you want to use USB Mass Store devices based
@@ -61,8 +65,10 @@ config USB_STORAGE_ISD200
           - CyQ've CQ8060A CDRW drive
           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 
+          If this driver is compiled as a module, it will be named ums-isd200.
+
 config USB_STORAGE_USBAT
-        bool "USBAT/USBAT02-based storage support"
+        tristate "USBAT/USBAT02-based storage support"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support storage devices
@@ -82,30 +88,38 @@ config USB_STORAGE_USBAT
           - RCA LYRA MP3 portable
           - Sandisk ImageMate SDDR-05b
 
+          If this driver is compiled as a module, it will be named ums-usbat.
+
 config USB_STORAGE_SDDR09
-        bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+        tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support the Sandisk SDDR-09
           SmartMedia reader in the USB Mass Storage driver.
           Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 
+          If this driver is compiled as a module, it will be named ums-sddr09.
+
 config USB_STORAGE_SDDR55
-        bool "SanDisk SDDR-55 SmartMedia support"
+        tristate "SanDisk SDDR-55 SmartMedia support"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support the Sandisk SDDR-55
           SmartMedia reader in the USB Mass Storage driver.
 
+          If this driver is compiled as a module, it will be named ums-sddr55.
+
 config USB_STORAGE_JUMPSHOT
-        bool "Lexar Jumpshot Compact Flash Reader"
+        tristate "Lexar Jumpshot Compact Flash Reader"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support the Lexar Jumpshot
           USB CompactFlash reader.
 
+          If this driver is compiled as a module, it will be named ums-jumpshot.
+
 config USB_STORAGE_ALAUDA
-        bool "Olympus MAUSB-10/Fuji DPC-R1 support"
+        tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support the Olympus MAUSB-10
@@ -114,8 +128,10 @@ config USB_STORAGE_ALAUDA
           These devices are based on the Alauda chip and support both
           XD and SmartMedia cards.
 
+          If this driver is compiled as a module, it will be named ums-alauda.
+
 config USB_STORAGE_ONETOUCH
-        bool "Support OneTouch Button on Maxtor Hard Drives"
+        tristate "Support OneTouch Button on Maxtor Hard Drives"
         depends on USB_STORAGE
         depends on INPUT=y || INPUT=USB_STORAGE
         help
@@ -127,8 +143,10 @@ config USB_STORAGE_ONETOUCH
           this input in any keybinding software. (e.g. gnome's keyboard short-
           cuts)
 
+          If this driver is compiled as a module, it will be named ums-onetouch.
+
 config USB_STORAGE_KARMA
-        bool "Support for Rio Karma music player"
+        tristate "Support for Rio Karma music player"
         depends on USB_STORAGE
         help
           Say Y here to include additional code to support the Rio Karma
@@ -139,8 +157,10 @@ config USB_STORAGE_KARMA
           on the resulting scsi device node returns the Karma to normal
           operation.
 
+          If this driver is compiled as a module, it will be named ums-karma.
+
 config USB_STORAGE_CYPRESS_ATACB
-        bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+        tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
         depends on USB_STORAGE
         ---help---
           Say Y here if you want to use SAT (ata pass through) on devices based
@@ -150,6 +170,8 @@ config USB_STORAGE_CYPRESS_ATACB
           If you say no here your device will still work with the standard usb
           mass storage class.
 
+          If this driver is compiled as a module, it will be named ums-cypress.
+
 config USB_LIBUSUAL
         bool "The shared table of common (or usual) storage devices"
         depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index b32069313390..5be54c019662 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -10,21 +10,36 @@ EXTRA_CFLAGS	:= -Idrivers/scsi
 obj-$(CONFIG_USB_STORAGE)       += usb-storage.o
 
 usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)     += debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT)     += shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)    += sddr09.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)    += sddr55.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)   += freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)    += isd200.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)   += datafab.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)  += jumpshot.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)    += alauda.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)  += onetouch.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)     += karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=     scsiglue.o protocol.o transport.o usb.o \
                         initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
 
-ifneq ($(CONFIG_USB_LIBUSUAL),)
-        obj-$(CONFIG_USB)       += libusual.o
+ifeq ($(CONFIG_USB_LIBUSUAL),)
+        usb-storage-objs        += usual-tables.o
+else
+        obj-$(CONFIG_USB)       += libusual.o usual-tables.o
 endif
+
+obj-$(CONFIG_USB_STORAGE_ALAUDA)        += ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB)       += ums-datafab.o
+obj-$(CONFIG_USB_STORAGE_FREECOM)       += ums-freecom.o
+obj-$(CONFIG_USB_STORAGE_ISD200)        += ums-isd200.o
+obj-$(CONFIG_USB_STORAGE_JUMPSHOT)      += ums-jumpshot.o
+obj-$(CONFIG_USB_STORAGE_KARMA)         += ums-karma.o
+obj-$(CONFIG_USB_STORAGE_ONETOUCH)      += ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_SDDR09)        += ums-sddr09.o
+obj-$(CONFIG_USB_STORAGE_SDDR55)        += ums-sddr55.o
+obj-$(CONFIG_USB_STORAGE_USBAT)         += ums-usbat.o
+
+ums-alauda-objs         := alauda.o
+ums-cypress-objs        := cypress_atacb.o
+ums-datafab-objs        := datafab.o
+ums-freecom-objs        := freecom.o
+ums-isd200-objs         := isd200.o
+ums-jumpshot-objs       := jumpshot.o
+ums-karma-objs          := karma.o
+ums-onetouch-objs       := onetouch.o
+ums-sddr09-objs         := sddr09.o
+ums-sddr55-objs         := sddr55.o
+ums-usbat-objs          := shuttle_usbat.o
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 8d3711a7ff06..67edc65acb8e 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -31,6 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -39,7 +41,79 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "alauda.h"
+
+MODULE_DESCRIPTION("Driver for Alauda-based card readers");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR             0x01
+#define ALAUDA_STATUS_READY             0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS      0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS      0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE      0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE      0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG         0x86
+#define ALAUDA_GET_SM_MEDIA_SIG         0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD                 0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA       0x85
+#define ALAUDA_BULK_READ_BLOCK          0x94
+#define ALAUDA_BULK_ERASE_BLOCK         0xa3
+#define ALAUDA_BULK_WRITE_BLOCK         0xb4
+#define ALAUDA_BULK_GET_STATUS2         0xb7
+#define ALAUDA_BULK_RESET_MEDIA         0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD                  0x00
+#define ALAUDA_PORT_SM                  0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF    0xffff
+#define SPARE    0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+        unsigned long capacity;         /* total media size in bytes */
+        unsigned int pagesize;          /* page size in bytes */
+        unsigned int blocksize;         /* number of pages per block */
+        unsigned int uzonesize;         /* number of usable blocks per zone */
+        unsigned int zonesize;          /* number of blocks per zone */
+        unsigned int blockmask;         /* mask to get page from address */
+
+        unsigned char pageshift;
+        unsigned char blockshift;
+        unsigned char zoneshift;
+
+        u16 **lba_to_pba;               /* logical to physical block map */
+        u16 **pba_to_lba;               /* physical to logical block map */
+};
+
+struct alauda_info {
+        struct alauda_media_info port[2];
+        int wr_ep;                      /* endpoint to write data out of */
+
+        unsigned char sense_key;
+        unsigned long sense_asc;        /* additional sense code */
+        unsigned long sense_ascq;       /* additional sense code qualifier */
+};
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -52,6 +126,48 @@
 #define PBA_HI(pba) (pba >> 3)
 #define PBA_ZONE(pba) (pba >> 11)
 
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id alauda_usb_ids[] = {
+#       include "unusual_alauda.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+#       include "unusual_alauda.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Media handling
  */
@@ -307,7 +423,8 @@ static int alauda_init_media(struct us_data *us)
                 data[0], data[1], data[2], data[3]);
         media_info = alauda_card_find_id(data[1]);
         if (media_info == NULL) {
-                printk("alauda_init_media: Unrecognised media signature: "
+                printk(KERN_WARNING
+                        "alauda_init_media: Unrecognised media signature: "
                         "%02X %02X %02X %02X\n",
                         data[0], data[1], data[2], data[3]);
                 return USB_STOR_TRANSPORT_ERROR;
@@ -518,7 +635,8 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
 
                 /* check even parity */
                 if (parity[data[6] ^ data[7]]) {
-                        printk("alauda_read_map: Bad parity in LBA for block %d"
+                        printk(KERN_WARNING
+                               "alauda_read_map: Bad parity in LBA for block %d"
                                " (%02X %02X)\n", i, data[6], data[7]);
                         pba_to_lba[i] = UNUSABLE;
                         continue;
@@ -538,13 +656,16 @@ static int alauda_read_map(struct us_data *us, unsigned int zone)
                  */
 
                 if (lba_offset >= uzonesize) {
-                        printk("alauda_read_map: Bad low LBA %d for block %d\n",
+                        printk(KERN_WARNING
+                               "alauda_read_map: Bad low LBA %d for block %d\n",
                                lba_real, blocknum);
                         continue;
                 }
 
                 if (lba_to_pba[lba_offset] != UNDEF) {
-                        printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
+                        printk(KERN_WARNING
+                               "alauda_read_map: "
+                               "LBA %d seen for PBA %d and %d\n",
                                lba_real, lba_to_pba[lba_offset], blocknum);
                         continue;
                 }
@@ -712,13 +833,15 @@ static int alauda_write_lba(struct us_data *us, u16 lba,
         if (pba == 1) {
                 /* Maybe it is impossible to write to PBA 1.
                    Fake success, but don't do anything. */
-                printk("alauda_write_lba: avoid writing to pba 1\n");
+                printk(KERN_WARNING
+                       "alauda_write_lba: avoid writing to pba 1\n");
                 return USB_STOR_TRANSPORT_GOOD;
         }
 
         new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
         if (!new_pba) {
-                printk("alauda_write_lba: Out of unused blocks\n");
+                printk(KERN_WARNING
+                       "alauda_write_lba: Out of unused blocks\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
@@ -818,7 +941,7 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
         len = min(sectors, blocksize) * (pagesize + 64);
         buffer = kmalloc(len, GFP_NOIO);
         if (buffer == NULL) {
-                printk("alauda_read_data: Out of memory\n");
+                printk(KERN_WARNING "alauda_read_data: Out of memory\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
@@ -911,7 +1034,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
         len = min(sectors, blocksize) * pagesize;
         buffer = kmalloc(len, GFP_NOIO);
         if (buffer == NULL) {
-                printk("alauda_write_data: Out of memory\n");
+                printk(KERN_WARNING "alauda_write_data: Out of memory\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
@@ -921,7 +1044,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
          */
         blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
         if (blockbuffer == NULL) {
-                printk("alauda_write_data: Out of memory\n");
+                printk(KERN_WARNING "alauda_write_data: Out of memory\n");
                 kfree(buffer);
                 return USB_STOR_TRANSPORT_ERROR;
         }
@@ -991,7 +1114,7 @@ static void alauda_info_destructor(void *extra)
 /*
  * Initialize alauda_info struct and find the data-write endpoint
  */
-int init_alauda(struct us_data *us)
+static int init_alauda(struct us_data *us)
 {
         struct alauda_info *info;
         struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
@@ -1013,7 +1136,7 @@ int init_alauda(struct us_data *us)
         return USB_STOR_TRANSPORT_GOOD;
 }
 
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         int rc;
         struct alauda_info *info = (struct alauda_info *) us->extra;
@@ -1121,3 +1244,48 @@ int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
         return USB_STOR_TRANSPORT_FAILED;
 }
 
+static int alauda_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - alauda_usb_ids) + alauda_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name  = "Alauda Control/Bulk";
+        us->transport = alauda_transport;
+        us->transport_reset = usb_stor_Bulk_reset;
+        us->max_lun = 1;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver alauda_driver = {
+        .name =         "ums-alauda",
+        .probe =        alauda_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     alauda_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init alauda_init(void)
+{
+        return usb_register(&alauda_driver);
+}
+
+static void __exit alauda_exit(void)
+{
+        usb_deregister(&alauda_driver);
+}
+
+module_init(alauda_init);
+module_exit(alauda_exit);
diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h
deleted file mode 100644
index a700f87d0803..000000000000
--- a/drivers/usb/storage/alauda.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Driver for Alauda-based card readers
- *
- * Current development and maintenance by:
- *    (c) 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See alauda.c for more explanation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_ALAUDA_H
-#define _USB_ALAUDA_H
-
-/*
- * Status bytes
- */
-#define ALAUDA_STATUS_ERROR             0x01
-#define ALAUDA_STATUS_READY             0x40
-
-/*
- * Control opcodes (for request field)
- */
-#define ALAUDA_GET_XD_MEDIA_STATUS      0x08
-#define ALAUDA_GET_SM_MEDIA_STATUS      0x98
-#define ALAUDA_ACK_XD_MEDIA_CHANGE      0x0a
-#define ALAUDA_ACK_SM_MEDIA_CHANGE      0x9a
-#define ALAUDA_GET_XD_MEDIA_SIG         0x86
-#define ALAUDA_GET_SM_MEDIA_SIG         0x96
-
-/*
- * Bulk command identity (byte 0)
- */
-#define ALAUDA_BULK_CMD                 0x40
-
-/*
- * Bulk opcodes (byte 1)
- */
-#define ALAUDA_BULK_GET_REDU_DATA       0x85
-#define ALAUDA_BULK_READ_BLOCK          0x94
-#define ALAUDA_BULK_ERASE_BLOCK         0xa3
-#define ALAUDA_BULK_WRITE_BLOCK         0xb4
-#define ALAUDA_BULK_GET_STATUS2         0xb7
-#define ALAUDA_BULK_RESET_MEDIA         0xe0
-
-/*
- * Port to operate on (byte 8)
- */
-#define ALAUDA_PORT_XD                  0x00
-#define ALAUDA_PORT_SM                  0x01
-
-/*
- * LBA and PBA are unsigned ints. Special values.
- */
-#define UNDEF    0xffff
-#define SPARE    0xfffe
-#define UNUSABLE 0xfffd
-
-int init_alauda(struct us_data *us);
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct alauda_media_info {
-        unsigned long capacity;         /* total media size in bytes */
-        unsigned int pagesize;          /* page size in bytes */
-        unsigned int blocksize;         /* number of pages per block */
-        unsigned int uzonesize;         /* number of usable blocks per zone */
-        unsigned int zonesize;          /* number of blocks per zone */
-        unsigned int blockmask;         /* mask to get page from address */
-
-        unsigned char pageshift;
-        unsigned char blockshift;
-        unsigned char zoneshift;
-
-        u16 **lba_to_pba;               /* logical to physical block map */
-        u16 **pba_to_lba;               /* physical to logical block map */
-};
-
-struct alauda_info {
-        struct alauda_media_info port[2];
-        int wr_ep;                      /* endpoint to write data out of */
-
-        unsigned char sense_key;
-        unsigned long sense_asc;        /* additional sense code */
-        unsigned long sense_ascq;       /* additional sense code qualifier */
-};
-
-#endif
-
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 898e67d30e56..c84471821183 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -19,6 +19,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_eh.h>
@@ -29,6 +30,49 @@
 #include "scsiglue.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id cypress_usb_ids[] = {
+#       include "unusual_cypress.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#       include "unusual_cypress.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * ATACB is a protocol used on cypress usb<->ata bridge to
  * send raw ATA command over mass storage
@@ -36,7 +80,7 @@
  * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
  * datasheet from cypress.com.
  */
-void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 {
         unsigned char save_cmnd[MAX_COMMAND_SIZE];
 
@@ -133,19 +177,18 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
                 /* build the command for
                  * reading the ATA registers */
-                scsi_eh_prep_cmnd(srb, &ses, NULL, 0, 0);
-                srb->sdb.length = sizeof(regs);
-                sg_init_one(&ses.sense_sgl, regs, srb->sdb.length);
-                srb->sdb.table.sgl = &ses.sense_sgl;
-                srb->sc_data_direction = DMA_FROM_DEVICE;
-                srb->sdb.table.nents = 1;
+                scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
                 /* we use the same command as before, but we set
                  * the read taskfile bit, for not executing atacb command,
                  * but reading register selected in srb->cmnd[4]
                  */
+                srb->cmd_len = 16;
+                srb->cmnd = ses.cmnd;
                 srb->cmnd[2] = 1;
 
                 usb_stor_transparent_scsi_command(srb, us);
+                memcpy(regs, srb->sense_buffer, sizeof(regs));
                 tmp_result = srb->result;
                 scsi_eh_restore_cmnd(srb, &ses);
                 /* we fail to get registers, report invalid command */
@@ -162,8 +205,8 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
                 /* XXX we should generate sk, asc, ascq from status and error
                  * regs
-                 * (see 11.1 Error translation ­ ATA device error to SCSI error map)
-                 * and ata_to_sense_error from libata.
+                 * (see 11.1 Error translation ATA device error to SCSI error
+                 *  map, and ata_to_sense_error from libata.)
                  */
 
                 /* Sense data is current and format is descriptor. */
@@ -198,3 +241,48 @@ end:
         if (srb->cmnd[0] == ATA_12)
                 srb->cmd_len = 12;
 }
+
+
+static int cypress_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - cypress_usb_ids) + cypress_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->protocol_name = "Transparent SCSI with Cypress ATACB";
+        us->proto_handler = cypress_atacb_passthrough;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver cypress_driver = {
+        .name =         "ums-cypress",
+        .probe =        cypress_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     cypress_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init cypress_init(void)
+{
+        return usb_register(&cypress_driver);
+}
+
+static void __exit cypress_exit(void)
+{
+        usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 17f1ae232919..2b6e565262c2 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -49,6 +49,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -58,12 +59,65 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "datafab.h"
+
+MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+struct datafab_info {
+        unsigned long   sectors;        /* total sector count */
+        unsigned long   ssize;          /* sector size in bytes */
+        signed char     lun;            /* used for dual-slot readers */
+
+        /* the following aren't used yet */
+        unsigned char   sense_key;
+        unsigned long   sense_asc;      /* additional sense code */
+        unsigned long   sense_ascq;     /* additional sense code qualifier */
+};
 
 static int datafab_determine_lun(struct us_data *us,
                                  struct datafab_info *info);
 
 
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id datafab_usb_ids[] = {
+#       include "unusual_datafab.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+#       include "unusual_datafab.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static inline int
 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
         if (len == 0)
@@ -500,7 +554,7 @@ static void datafab_info_destructor(void *extra)
 
 // Transport for the Datafab MDCFE-B
 //
-int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         struct datafab_info *info;
         int rc;
@@ -665,3 +719,49 @@ int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
         info->sense_ascq = 0x00;
         return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int datafab_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - datafab_usb_ids) + datafab_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name  = "Datafab Bulk-Only";
+        us->transport = datafab_transport;
+        us->transport_reset = usb_stor_Bulk_reset;
+        us->max_lun = 1;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver datafab_driver = {
+        .name =         "ums-datafab",
+        .probe =        datafab_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     datafab_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init datafab_init(void)
+{
+        return usb_register(&datafab_driver);
+}
+
+static void __exit datafab_exit(void)
+{
+        usb_deregister(&datafab_driver);
+}
+
+module_init(datafab_init);
+module_exit(datafab_exit);
diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h
deleted file mode 100644
index 32e3f271e582..000000000000
--- a/drivers/usb/storage/datafab.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Driver for Datafab MDCFE-B USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
- *
- * See datafab.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_DATAFAB_MDCFE_B_H
-#define _USB_DATAFAB_MDCFE_B_H
-
-extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct datafab_info {
-        unsigned long   sectors;        // total sector count
-        unsigned long   ssize;          // sector size in bytes
-        signed char     lun;            // used for dual-slot readers
-        
-        // the following aren't used yet
-        unsigned char   sense_key;
-        unsigned long   sense_asc;      // additional sense code
-        unsigned long   sense_ascq;     // additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 73ac7262239e..54cc94277acb 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -26,6 +26,7 @@
  * (http://www.freecom.de/)
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -33,7 +34,10 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "freecom.h"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
 static void pdump (void *, int);
@@ -103,6 +107,47 @@ struct freecom_status {
 #define FCM_PACKET_LENGTH               64
 #define FCM_STATUS_PACKET_LENGTH        4
 
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id freecom_usb_ids[] = {
+#       include "unusual_freecom.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+#       include "unusual_freecom.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 static int
 freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
                 unsigned int ipipe, unsigned int opipe, int count)
@@ -173,7 +218,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
  * Transport for the Freecom USB/IDE adaptor.
  *
  */
-int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         struct freecom_cb_wrap *fcb;
         struct freecom_status  *fst;
@@ -377,8 +422,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
         return USB_STOR_TRANSPORT_GOOD;
 }
 
-int
-freecom_init (struct us_data *us)
+static int init_freecom(struct us_data *us)
 {
         int result;
         char *buffer = us->iobuf;
@@ -417,7 +461,7 @@ freecom_init (struct us_data *us)
         return USB_STOR_TRANSPORT_GOOD;
 }
 
-int usb_stor_freecom_reset(struct us_data *us)
+static int usb_stor_freecom_reset(struct us_data *us)
 {
         printk (KERN_CRIT "freecom reset called\n");
 
@@ -479,3 +523,48 @@ static void pdump (void *ibuffer, int length)
 }
 #endif
 
+static int freecom_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - freecom_usb_ids) + freecom_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name = "Freecom";
+        us->transport = freecom_transport;
+        us->transport_reset = usb_stor_freecom_reset;
+        us->max_lun = 0;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver freecom_driver = {
+        .name =         "ums-freecom",
+        .probe =        freecom_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     freecom_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init freecom_init(void)
+{
+        return usb_register(&freecom_driver);
+}
+
+static void __exit freecom_exit(void)
+{
+        usb_deregister(&freecom_driver);
+}
+
+module_init(freecom_init);
+module_exit(freecom_exit);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 383abf2516a5..882c57b399f7 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -44,6 +44,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hdreg.h>
 #include <linux/scatterlist.h>
@@ -57,7 +58,53 @@
 #include "protocol.h"
 #include "debug.h"
 #include "scsiglue.h"
-#include "isd200.h"
+
+MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
+MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>");
+MODULE_LICENSE("GPL");
+
+static int isd200_Initialization(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id isd200_usb_ids[] = {
+#       include "unusual_isd200.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev isd200_unusual_dev_list[] = {
+#       include "unusual_isd200.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+#undef USUAL_DEV
 
 
 /* Timeout defines (in Seconds) */
@@ -1518,7 +1565,7 @@ static int isd200_init_info(struct us_data *us)
  * Initialization for the ISD200 
  */
 
-int isd200_Initialization(struct us_data *us)
+static int isd200_Initialization(struct us_data *us)
 {
         US_DEBUGP("ISD200 Initialization...\n");
 
@@ -1549,7 +1596,7 @@ int isd200_Initialization(struct us_data *us)
  *
  */
 
-void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
+static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 {
         int sendToTransport = 1, orig_bufflen;
         union ata_cdb ataCdb;
@@ -1570,3 +1617,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 
         isd200_srb_set_bufflen(srb, orig_bufflen);
 }
+
+static int isd200_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - isd200_usb_ids) + isd200_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->protocol_name = "ISD200 ATA/ATAPI";
+        us->proto_handler = isd200_ata_command;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver isd200_driver = {
+        .name =         "ums-isd200",
+        .probe =        isd200_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     isd200_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init isd200_init(void)
+{
+        return usb_register(&isd200_driver);
+}
+
+static void __exit isd200_exit(void)
+{
+        usb_deregister(&isd200_driver);
+}
+
+module_init(isd200_init);
+module_exit(isd200_exit);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index df67f13c9e73..1c69420e3acf 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -46,6 +46,7 @@
   */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -55,9 +56,61 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "jumpshot.h"
 
 
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id jumpshot_usb_ids[] = {
+#       include "unusual_jumpshot.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+#       include "unusual_jumpshot.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+   unsigned long   sectors;     /* total sector count */
+   unsigned long   ssize;       /* sector size in bytes */
+
+   /* the following aren't used yet */
+   unsigned char   sense_key;
+   unsigned long   sense_asc;   /* additional sense code */
+   unsigned long   sense_ascq;  /* additional sense code qualifier */
+};
+
 static inline int jumpshot_bulk_read(struct us_data *us,
                                      unsigned char *data, 
                                      unsigned int len)
@@ -429,7 +482,7 @@ static void jumpshot_info_destructor(void *extra)
 
 // Transport for the Lexar 'Jumpshot'
 //
-int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         struct jumpshot_info *info;
         int rc;
@@ -592,3 +645,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
         info->sense_ascq = 0x00;
         return USB_STOR_TRANSPORT_FAILED;
 }
+
+static int jumpshot_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name  = "Lexar Jumpshot Control/Bulk";
+        us->transport = jumpshot_transport;
+        us->transport_reset = usb_stor_Bulk_reset;
+        us->max_lun = 1;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+        .name =         "ums-jumpshot",
+        .probe =        jumpshot_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     jumpshot_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init jumpshot_init(void)
+{
+        return usb_register(&jumpshot_driver);
+}
+
+static void __exit jumpshot_exit(void)
+{
+        usb_deregister(&jumpshot_driver);
+}
+
+module_init(jumpshot_init);
+module_exit(jumpshot_exit);
diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h
deleted file mode 100644
index 19bac9d1558f..000000000000
--- a/drivers/usb/storage/jumpshot.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Driver for Lexar "Jumpshot" USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
- *
- * See jumpshot.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_JUMPSHOT_H
-#define _USB_JUMPSHOT_H
-
-extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct jumpshot_info {
-   unsigned long   sectors;     // total sector count
-   unsigned long   ssize;       // sector size in bytes
- 
-   // the following aren't used yet
-   unsigned char   sense_key;
-   unsigned long   sense_asc;   // additional sense code
-   unsigned long   sense_ascq;  // additional sense code qualifier
-};
-
-#endif
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index 0d79ae5683f7..7953d93a7739 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -18,6 +18,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -25,7 +27,10 @@
 #include "usb.h"
 #include "transport.h"
 #include "debug.h"
-#include "karma.h"
+
+MODULE_DESCRIPTION("Driver for Rio Karma");
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>");
+MODULE_LICENSE("GPL");
 
 #define RIO_PREFIX "RIOP\x00"
 #define RIO_PREFIX_LEN 5
@@ -36,13 +41,53 @@
 #define RIO_LEAVE_STORAGE 0x2
 #define RIO_RESET 0xC
 
-extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
-
 struct karma_data {
         int in_storage;
         char *recv;
 };
 
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id karma_usb_ids[] = {
+#       include "unusual_karma.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+#       include "unusual_karma.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Send commands to Rio Karma.
  *
@@ -104,7 +149,7 @@ err:
  * Trap START_STOP and READ_10 to leave/re-enter storage mode.
  * Everything else is propagated to the normal bulk layer.
  */
-int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         int ret;
         struct karma_data *data = (struct karma_data *) us->extra;
@@ -133,7 +178,7 @@ static void rio_karma_destructor(void *extra)
         kfree(data->recv);
 }
 
-int rio_karma_init(struct us_data *us)
+static int rio_karma_init(struct us_data *us)
 {
         int ret = 0;
         struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
@@ -153,3 +198,48 @@ int rio_karma_init(struct us_data *us)
 out:
         return ret;
 }
+
+static int karma_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - karma_usb_ids) + karma_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name = "Rio Karma/Bulk";
+        us->transport = rio_karma_transport;
+        us->transport_reset = usb_stor_Bulk_reset;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver karma_driver = {
+        .name =         "ums-karma",
+        .probe =        karma_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     karma_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init karma_init(void)
+{
+        return usb_register(&karma_driver);
+}
+
+static void __exit karma_exit(void)
+{
+        usb_deregister(&karma_driver);
+}
+
+module_init(karma_init);
+module_exit(karma_exit);
diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h
deleted file mode 100644
index 8a60972af8c5..000000000000
--- a/drivers/usb/storage/karma.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _KARMA_USB_H
-#define _KARMA_USB_H
-
-extern int rio_karma_init(struct us_data *us);
-extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index f970b27ba308..fe3ffe1459b2 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
 static int usu_probe_thread(void *arg);
 
 /*
- * The table.
- */
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-                    vendorName, productName,useProtocol, useTransport, \
-                    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-                    vendorName, productName, useProtocol, useTransport, \
-                    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
-  .driver_info = (flags) }
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = ((useType)<<24) }
-
-struct usb_device_id storage_usb_ids [] = {
-#       include "unusual_devs.h"
-        { } /* Terminating entry */
-};
-
-#undef USUAL_DEV
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-
-MODULE_DEVICE_TABLE(usb, storage_usb_ids);
-EXPORT_SYMBOL_GPL(storage_usb_ids);
-
-/*
  * @type: the module type as an integer
  */
 void usb_usual_set_present(int type)
@@ -167,7 +136,7 @@ static struct usb_driver usu_driver = {
         .name =         "libusual",
         .probe =        usu_probe,
         .disconnect =   usu_disconnect,
-        .id_table =     storage_usb_ids,
+        .id_table =     usb_storage_usb_ids,
 };
 
 /*
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index c7bf8954b4e4..380233bd6a39 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -35,9 +35,16 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 #include "usb.h"
-#include "onetouch.h"
 #include "debug.h"
 
+MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
+MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
+MODULE_LICENSE("GPL");
+
+#define ONETOUCH_PKT_LEN        0x02
+#define ONETOUCH_BUTTON         KEY_PROG1
+
+static int onetouch_connect_input(struct us_data *ss);
 static void onetouch_release_input(void *onetouch_);
 
 struct usb_onetouch {
@@ -52,6 +59,46 @@ struct usb_onetouch {
         unsigned int is_open:1;
 };
 
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id onetouch_usb_ids[] = {
+#       include "unusual_onetouch.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev onetouch_unusual_dev_list[] = {
+#       include "unusual_onetouch.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 static void usb_onetouch_irq(struct urb *urb)
 {
         struct usb_onetouch *onetouch = urb->context;
@@ -127,7 +174,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
 }
 #endif /* CONFIG_PM */
 
-int onetouch_connect_input(struct us_data *ss)
+static int onetouch_connect_input(struct us_data *ss)
 {
         struct usb_device *udev = ss->pusb_dev;
         struct usb_host_interface *interface;
@@ -236,3 +283,46 @@ static void onetouch_release_input(void *onetouch_)
                                 onetouch->data, onetouch->data_dma);
         }
 }
+
+static int onetouch_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - onetouch_usb_ids) + onetouch_unusual_dev_list);
+        if (result)
+                return result;
+
+        /* Use default transport and protocol */
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver onetouch_driver = {
+        .name =         "ums-onetouch",
+        .probe =        onetouch_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     onetouch_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init onetouch_init(void)
+{
+        return usb_register(&onetouch_driver);
+}
+
+static void __exit onetouch_exit(void)
+{
+        usb_deregister(&onetouch_driver);
+}
+
+module_init(onetouch_init);
+module_exit(onetouch_exit);
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
deleted file mode 100644
index 41c7aa8f0446..000000000000
--- a/drivers/usb/storage/onetouch.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ONETOUCH_H_
-#define _ONETOUCH_H_
-
-#define ONETOUCH_PKT_LEN        0x02
-#define ONETOUCH_BUTTON         KEY_PROG1
-
-int onetouch_connect_input(struct us_data *ss);
-
-#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index be441d84bc64..fc310f75eada 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
         /* send the command to the transport layer */
         usb_stor_invoke_transport(srb, us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
 
 /***********************************************************************
  * Scatter-gather transfer buffer access routines
@@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
         /* Return the amount actually transferred */
         return cnt;
 }
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
 /* Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
@@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer,
         if (buflen < scsi_bufflen(srb))
                 scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
 }
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 727c506417cc..4ca3b5860643 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,6 +135,12 @@ static int slave_configure(struct scsi_device *sdev)
                 if (sdev->request_queue->max_sectors > max_sectors)
                         blk_queue_max_sectors(sdev->request_queue,
                                               max_sectors);
+        } else if (sdev->type == TYPE_TAPE) {
+                /* Tapes need much higher max_sector limits, so just
+                 * raise it to the maximum possible (4 GB / 512) and
+                 * let the queue segment size sort out the real limit.
+                 */
+                blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF);
         }
 
         /* Some USB host controllers can't do DMA; they have to use PIO.
@@ -563,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = {
         [7]     = 0x0a,                     /* additional length */
         [12]    = 0x24                      /* Invalid Field in CDB */
 };
-
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 531ae5c5abf3..ab5f9f37575a 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -41,6 +41,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -51,7 +52,53 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr09.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader");
+MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr09_usb_ids[] = {
+#       include "unusual_sddr09.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+#       include "unusual_sddr09.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -723,7 +770,7 @@ sddr09_read_data(struct us_data *us,
         len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
         buffer = kmalloc(len, GFP_NOIO);
         if (buffer == NULL) {
-                printk("sddr09_read_data: Out of memory\n");
+                printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
                 return -ENOMEM;
         }
 
@@ -838,7 +885,8 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
         if (pba == UNDEF) {
                 pba = sddr09_find_unused_pba(info, lba);
                 if (!pba) {
-                        printk("sddr09_write_lba: Out of unused blocks\n");
+                        printk(KERN_WARNING
+                               "sddr09_write_lba: Out of unused blocks\n");
                         return -ENOSPC;
                 }
                 info->pba_to_lba[pba] = lba;
@@ -849,7 +897,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
         if (pba == 1) {
                 /* Maybe it is impossible to write to PBA 1.
                    Fake success, but don't do anything. */
-                printk("sddr09: avoid writing to pba 1\n");
+                printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
                 return 0;
         }
 
@@ -954,7 +1002,7 @@ sddr09_write_data(struct us_data *us,
         blocklen = (pagelen << info->blockshift);
         blockbuffer = kmalloc(blocklen, GFP_NOIO);
         if (!blockbuffer) {
-                printk("sddr09_write_data: Out of memory\n");
+                printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
                 return -ENOMEM;
         }
 
@@ -965,7 +1013,7 @@ sddr09_write_data(struct us_data *us,
         len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
         buffer = kmalloc(len, GFP_NOIO);
         if (buffer == NULL) {
-                printk("sddr09_write_data: Out of memory\n");
+                printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
                 kfree(blockbuffer);
                 return -ENOMEM;
         }
@@ -1112,7 +1160,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 
         if (result) {
                 US_DEBUGP("Result of read_deviceID is %d\n", result);
-                printk("sddr09: could not read card info\n");
+                printk(KERN_WARNING "sddr09: could not read card info\n");
                 return NULL;
         }
 
@@ -1153,7 +1201,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
                 sprintf(blurbtxt + strlen(blurbtxt),
                         ", WP");
 
-        printk("%s\n", blurbtxt);
+        printk(KERN_WARNING "%s\n", blurbtxt);
 
         return cardinfo;
 }
@@ -1184,7 +1232,7 @@ sddr09_read_map(struct us_data *us) {
         alloc_len = (alloc_blocks << CONTROL_SHIFT);
         buffer = kmalloc(alloc_len, GFP_NOIO);
         if (buffer == NULL) {
-                printk("sddr09_read_map: out of memory\n");
+                printk(KERN_WARNING "sddr09_read_map: out of memory\n");
                 result = -1;
                 goto done;
         }
@@ -1198,7 +1246,7 @@ sddr09_read_map(struct us_data *us) {
         info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
 
         if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
-                printk("sddr09_read_map: out of memory\n");
+                printk(KERN_WARNING "sddr09_read_map: out of memory\n");
                 result = -1;
                 goto done;
         }
@@ -1238,7 +1286,8 @@ sddr09_read_map(struct us_data *us) {
                         if (ptr[j] != 0)
                                 goto nonz;
                 info->pba_to_lba[i] = UNUSABLE;
-                printk("sddr09: PBA %d has no logical mapping\n", i);
+                printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
+                       i);
                 continue;
 
         nonz:
@@ -1251,7 +1300,8 @@ sddr09_read_map(struct us_data *us) {
         nonff:
                 /* normal PBAs start with six FFs */
                 if (j < 6) {
-                        printk("sddr09: PBA %d has no logical mapping: "
+                        printk(KERN_WARNING
+                               "sddr09: PBA %d has no logical mapping: "
                                "reserved area = %02X%02X%02X%02X "
                                "data status %02X block status %02X\n",
                                i, ptr[0], ptr[1], ptr[2], ptr[3],
@@ -1261,7 +1311,8 @@ sddr09_read_map(struct us_data *us) {
                 }
 
                 if ((ptr[6] >> 4) != 0x01) {
-                        printk("sddr09: PBA %d has invalid address field "
+                        printk(KERN_WARNING
+                               "sddr09: PBA %d has invalid address field "
                                "%02X%02X/%02X%02X\n",
                                i, ptr[6], ptr[7], ptr[11], ptr[12]);
                         info->pba_to_lba[i] = UNUSABLE;
@@ -1270,7 +1321,8 @@ sddr09_read_map(struct us_data *us) {
 
                 /* check even parity */
                 if (parity[ptr[6] ^ ptr[7]]) {
-                        printk("sddr09: Bad parity in LBA for block %d"
+                        printk(KERN_WARNING
+                               "sddr09: Bad parity in LBA for block %d"
                                " (%02X %02X)\n", i, ptr[6], ptr[7]);
                         info->pba_to_lba[i] = UNUSABLE;
                         continue;
@@ -1289,7 +1341,8 @@ sddr09_read_map(struct us_data *us) {
                  */
 
                 if (lba >= 1000) {
-                        printk("sddr09: Bad low LBA %d for block %d\n",
+                        printk(KERN_WARNING
+                               "sddr09: Bad low LBA %d for block %d\n",
                                lba, i);
                         goto possibly_erase;
                 }
@@ -1297,7 +1350,8 @@ sddr09_read_map(struct us_data *us) {
                 lba += 1000*(i/0x400);
 
                 if (info->lba_to_pba[lba] != UNDEF) {
-                        printk("sddr09: LBA %d seen for PBA %d and %d\n",
+                        printk(KERN_WARNING
+                               "sddr09: LBA %d seen for PBA %d and %d\n",
                                lba, info->lba_to_pba[lba], i);
                         goto possibly_erase;
                 }
@@ -1399,7 +1453,7 @@ sddr09_common_init(struct us_data *us) {
  * unusual devices list but called from here then LUN 0 of the combo reader
  * is not recognized. But I do not know what precisely these calls do.
  */
-int
+static int
 usb_stor_sddr09_dpcm_init(struct us_data *us) {
         int result;
         unsigned char *data = us->iobuf;
@@ -1449,7 +1503,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
 /*
  * Transport for the Microtech DPCM-USB
  */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         int ret;
 
@@ -1491,7 +1545,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Transport for the Sandisk SDDR-09
  */
-int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         static unsigned char sensekey = 0, sensecode = 0;
         static unsigned char havefakesense = 0;
@@ -1690,7 +1744,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Initialization routine for the sddr09 subdriver
  */
-int
+static int
 usb_stor_sddr09_init(struct us_data *us) {
         return sddr09_common_init(us);
 }
+
+static int sddr09_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - sddr09_usb_ids) + sddr09_unusual_dev_list);
+        if (result)
+                return result;
+
+        if (us->protocol == US_PR_DPCM_USB) {
+                us->transport_name = "Control/Bulk-EUSB/SDDR09";
+                us->transport = dpcm_transport;
+                us->transport_reset = usb_stor_CB_reset;
+                us->max_lun = 1;
+        } else {
+                us->transport_name = "EUSB/SDDR09";
+                us->transport = sddr09_transport;
+                us->transport_reset = usb_stor_CB_reset;
+                us->max_lun = 0;
+        }
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver sddr09_driver = {
+        .name =         "ums-sddr09",
+        .probe =        sddr09_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     sddr09_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init sddr09_init(void)
+{
+        return usb_register(&sddr09_driver);
+}
+
+static void __exit sddr09_exit(void)
+{
+        usb_deregister(&sddr09_driver);
+}
+
+module_init(sddr09_init);
+module_exit(sddr09_exit);
diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h
deleted file mode 100644
index b701172e12e3..000000000000
--- a/drivers/usb/storage/sddr09.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
- *
- * See sddr09.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_EUSB_SDDR09_H
-#define _USB_SHUTTLE_EUSB_SDDR09_H
-
-/* Sandisk SDDR-09 stuff */
-
-extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
-
-/* Microtech DPCM-USB stuff */
-
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 0d8df7577899..44dfed7754ed 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -24,6 +24,7 @@
 
 #include <linux/jiffies.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -33,7 +34,48 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr55.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader");
+MODULE_AUTHOR("Simon Munton");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr55_usb_ids[] = {
+#       include "unusual_sddr55.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr55_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev sddr55_unusual_dev_list[] = {
+#       include "unusual_sddr55.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -513,7 +555,8 @@ static int sddr55_read_deviceID(struct us_data *us,
 }
 
 
-int sddr55_reset(struct us_data *us) {
+static int sddr55_reset(struct us_data *us)
+{
         return 0;
 }
 
@@ -703,7 +746,9 @@ static int sddr55_read_map(struct us_data *us) {
                 
                 if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
                     !info->force_read_only) {
-                        printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000);
+                        printk(KERN_WARNING
+                               "sddr55: map inconsistency at LBA %04X\n",
+                               lba + zone * 1000);
                         info->force_read_only = 1;
                 }
 
@@ -732,7 +777,7 @@ static void sddr55_card_info_destructor(void *extra) {
 /*
  * Transport for the Sandisk SDDR-55
  */
-int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
         int result;
         static unsigned char inquiry_response[8] = {
@@ -929,3 +974,49 @@ int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
         return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
 }
 
+
+static int sddr55_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - sddr55_usb_ids) + sddr55_unusual_dev_list);
+        if (result)
+                return result;
+
+        us->transport_name = "SDDR55";
+        us->transport = sddr55_transport;
+        us->transport_reset = sddr55_reset;
+        us->max_lun = 0;
+
+        result = usb_stor_probe2(us);
+        return result;
+}
+
+static struct usb_driver sddr55_driver = {
+        .name =         "ums-sddr55",
+        .probe =        sddr55_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     sddr55_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init sddr55_init(void)
+{
+        return usb_register(&sddr55_driver);
+}
+
+static void __exit sddr55_exit(void)
+{
+        usb_deregister(&sddr55_driver);
+}
+
+module_init(sddr55_init);
+module_exit(sddr55_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index ae6d64810d2a..b62a28814ebe 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -42,6 +42,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/cdrom.h>
 
@@ -52,7 +53,100 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "shuttle_usbat.h"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+/* Supported device types */
+#define USBAT_DEV_HP8200        0x01
+#define USBAT_DEV_FLASH         0x02
+
+#define USBAT_EPP_PORT          0x10
+#define USBAT_EPP_REGISTER      0x30
+#define USBAT_ATA               0x40
+#define USBAT_ISA               0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG              0x00
+#define USBAT_CMD_WRITE_REG             0x01
+#define USBAT_CMD_READ_BLOCK    0x02
+#define USBAT_CMD_WRITE_BLOCK   0x03
+#define USBAT_CMD_COND_READ_BLOCK       0x04
+#define USBAT_CMD_COND_WRITE_BLOCK      0x05
+#define USBAT_CMD_WRITE_REGS    0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD      0x80
+#define USBAT_CMD_SET_FEAT      0x81
+#define USBAT_CMD_UIO           0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ  1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ  0x20    /* full compare */
+#define USBAT_QUAL_ALQ  0x10    /* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE  0
+#define USBAT_FLASH_MEDIA_CF    1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME  0
+#define USBAT_FLASH_MEDIA_CHANGED       1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
+#define USBAT_ATA_ERROR     0x11  /* error (R) */
+#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
+#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS    0x17  /* device status (R) */
+#define USBAT_ATA_CMD       0x17  /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD          0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT           0x40 /* Card Detect (Read Only) */
+                                     /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1             0x20 /* I/O 1 */
+#define USBAT_UIO_0             0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA       0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1           0x04 /* Input 1 */
+#define USBAT_UIO_UI0           0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK      0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST        0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD          0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1           0x20 /* I/O 1 set=output/clr=input */
+                                     /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0           0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST        0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80    /* External trigger enable */
+#define USBAT_FEAT_U1   0x08
+#define USBAT_FEAT_U0   0x04
+#define USBAT_FEAT_ET1  0x02
+#define USBAT_FEAT_ET2  0x01
+
+struct usbat_info {
+        int devicetype;
+
+        /* Used for Flash readers only */
+        unsigned long sectors;     /* total sector count */
+        unsigned long ssize;       /* sector size in bytes */
+
+        unsigned char sense_key;
+        unsigned long sense_asc;   /* additional sense code */
+        unsigned long sense_ascq;  /* additional sense code qualifier */
+};
 
 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
 #define LSB_of(s) ((s)&0xFF)
@@ -63,6 +157,48 @@ static int transferred = 0;
 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
 
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id usbat_usb_ids[] = {
+#       include "unusual_usbat.h"
+        { }             /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+                    vendor_name, product_name, use_protocol, use_transport, \
+                    init_function, Flags) \
+{ \
+        .vendorName = vendor_name,      \
+        .productName = product_name,    \
+        .useProtocol = use_protocol,    \
+        .useTransport = use_transport,  \
+        .initFunction = init_function,  \
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+#       include "unusual_usbat.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
 /*
  * Convenience function to produce an ATA read/write sectors command
  * Use cmd=0x20 for read, cmd=0x30 for write
@@ -1684,37 +1820,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
         return USB_STOR_TRANSPORT_FAILED;
 }
 
-int init_usbat_cd(struct us_data *us)
+static int init_usbat_cd(struct us_data *us)
 {
         return init_usbat(us, USBAT_DEV_HP8200);
 }
 
-
-int init_usbat_flash(struct us_data *us)
+static int init_usbat_flash(struct us_data *us)
 {
         return init_usbat(us, USBAT_DEV_FLASH);
 }
 
-int init_usbat_probe(struct us_data *us)
+static int usbat_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
 {
-        return init_usbat(us, 0);
+        struct us_data *us;
+        int result;
+
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - usbat_usb_ids) + usbat_unusual_dev_list);
+        if (result)
+                return result;
+
+        /* The actual transport will be determined later by the
+         * initialization routine; this is just a placeholder.
+         */
+        us->transport_name = "Shuttle USBAT";
+        us->transport = usbat_flash_transport;
+        us->transport_reset = usb_stor_CB_reset;
+        us->max_lun = 1;
+
+        result = usb_stor_probe2(us);
+        return result;
 }
 
-/*
- * Default transport function. Attempts to detect which transport function
- * should be called, makes it the new default, and calls it.
- *
- * This function should never be called. Our usbat_init() function detects the
- * device type and changes the us->transport ptr to the transport function
- * relevant to the device.
- * However, we'll support this impossible(?) case anyway.
- */
-int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
+static struct usb_driver usbat_driver = {
+        .name =         "ums-usbat",
+        .probe =        usbat_probe,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     usbat_usb_ids,
+        .soft_unbind =  1,
+};
+
+static int __init usbat_init(void)
 {
-        struct usbat_info *info = (struct usbat_info*) (us->extra);
-
-        if (usbat_set_transport(us, info, 0))
-                return USB_STOR_TRANSPORT_ERROR;
+        return usb_register(&usbat_driver);
+}
 
-        return us->transport(srb, us);  
+static void __exit usbat_exit(void)
+{
+        usb_deregister(&usbat_driver);
 }
+
+module_init(usbat_init);
+module_exit(usbat_exit);
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
deleted file mode 100644
index d8bfc43e9044..000000000000
--- a/drivers/usb/storage/shuttle_usbat.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See shuttle_usbat.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_USBAT_H
-#define _USB_SHUTTLE_USBAT_H
-
-/* Supported device types */
-#define USBAT_DEV_HP8200        0x01
-#define USBAT_DEV_FLASH         0x02
-
-#define USBAT_EPP_PORT          0x10
-#define USBAT_EPP_REGISTER      0x30
-#define USBAT_ATA               0x40
-#define USBAT_ISA               0x50
-
-/* Commands (need to be logically OR'd with an access type */
-#define USBAT_CMD_READ_REG              0x00
-#define USBAT_CMD_WRITE_REG             0x01
-#define USBAT_CMD_READ_BLOCK    0x02
-#define USBAT_CMD_WRITE_BLOCK   0x03
-#define USBAT_CMD_COND_READ_BLOCK       0x04
-#define USBAT_CMD_COND_WRITE_BLOCK      0x05
-#define USBAT_CMD_WRITE_REGS    0x07
-
-/* Commands (these don't need an access type) */
-#define USBAT_CMD_EXEC_CMD      0x80
-#define USBAT_CMD_SET_FEAT      0x81
-#define USBAT_CMD_UIO           0x82
-
-/* Methods of accessing UIO register */
-#define USBAT_UIO_READ  1
-#define USBAT_UIO_WRITE 0
-
-/* Qualifier bits */
-#define USBAT_QUAL_FCQ  0x20    /* full compare */
-#define USBAT_QUAL_ALQ  0x10    /* auto load subcount */
-
-/* USBAT Flash Media status types */
-#define USBAT_FLASH_MEDIA_NONE  0
-#define USBAT_FLASH_MEDIA_CF    1
-
-/* USBAT Flash Media change types */
-#define USBAT_FLASH_MEDIA_SAME  0
-#define USBAT_FLASH_MEDIA_CHANGED       1
-
-/* USBAT ATA registers */
-#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
-#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
-#define USBAT_ATA_ERROR     0x11  /* error (R) */
-#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
-#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
-#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
-#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
-#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
-#define USBAT_ATA_STATUS    0x17  /* device status (R) */
-#define USBAT_ATA_CMD       0x17  /* device command (W) */
-#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
-
-/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD          0x80 /* Enable Peripheral Control Signals */
-#define USBAT_UIO_CDT           0x40 /* Card Detect (Read Only) */
-                                     /* CDT = ACKD & !UI1 & !UI0 */
-#define USBAT_UIO_1             0x20 /* I/O 1 */
-#define USBAT_UIO_0             0x10 /* I/O 0 */
-#define USBAT_UIO_EPP_ATA       0x08 /* 1=EPP mode, 0=ATA mode */
-#define USBAT_UIO_UI1           0x04 /* Input 1 */
-#define USBAT_UIO_UI0           0x02 /* Input 0 */
-#define USBAT_UIO_INTR_ACK      0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
-
-/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST        0x80 /* Reset Peripheral */
-#define USBAT_UIO_ACKD          0x40 /* Enable Card Detect */
-#define USBAT_UIO_OE1           0x20 /* I/O 1 set=output/clr=input */
-                                     /* If ACKD=1, set OE1 to 1 also. */
-#define USBAT_UIO_OE0           0x10 /* I/O 0 set=output/clr=input */
-#define USBAT_UIO_ADPRST        0x01 /* Reset SCM chip */
-
-/* USBAT Features */
-#define USBAT_FEAT_ETEN 0x80    /* External trigger enable */
-#define USBAT_FEAT_U1   0x08
-#define USBAT_FEAT_U0   0x04
-#define USBAT_FEAT_ET1  0x02
-#define USBAT_FEAT_ET2  0x01
-
-extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat_cd(struct us_data *us);
-extern int init_usbat_flash(struct us_data *us);
-extern int init_usbat_probe(struct us_data *us);
-
-struct usbat_info {
-        int devicetype;
-
-        /* Used for Flash readers only */
-        unsigned long sectors;     /* total sector count */
-        unsigned long ssize;       /* sector size in bytes */
-
-        unsigned char sense_key;
-        unsigned long sense_asc;   /* additional sense code */
-        unsigned long sense_ascq;  /* additional sense code qualifier */
-};
-
-#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fb65d221cedf..d48c8553539d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
                 status = us->current_urb->actual_length;
         return status;
 }
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
 /* This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
@@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
         US_DEBUGP("%s: result = %d\n", __func__, result);
         return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
 
 
 /*
@@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
         return interpret_urb_result(us, pipe, size, result,
                         us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
 
 /*
  * Receive one interrupt buffer, without timeouts, but allowing early
@@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
         return interpret_urb_result(us, pipe, length, result, 
                         us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
 
 /*
  * Transfer a scatter-gather list via bulk transfer
@@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
         scsi_set_resid(srb, scsi_bufflen(srb) - partial);
         return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
 
 /*
  * Transfer an entire SCSI command's worth of data payload over the bulk
@@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
                 *residual = length_left;
         return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
 
 /***********************************************************************
  * Transport routines
@@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
                 usb_stor_clear_halt(us, pipe);
         return USB_STOR_TRANSPORT_FAILED;
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
 
 /*
  * Bulk only transport
@@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
         /* we should never get here, but if we do, we're in trouble */
         return USB_STOR_TRANSPORT_ERROR;
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
 
 /***********************************************************************
  * Reset routines
@@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us)
                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
                                  0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
 /* This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
@@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us)
                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
                                  0, us->ifnum, NULL, 0);
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
 /* Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/unusual_alauda.h
index 20d0fe6ba0c8..8c412f885dd2 100644
--- a/drivers/usb/storage/freecom.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,13 +1,4 @@
-/* Driver for Freecom USB/IDE adaptor
- *
- * Freecom v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 David Brown <usb-storage@davidb.org>
- *
- * See freecom.c for more explanation
+/* Unusual Devices File for the Alauda-based card readers
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -24,11 +15,17 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _FREECOM_USB_H
-#define _FREECOM_USB_H
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+                defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
+                "Fujifilm",
+                "DPC-R1 (Alauda)",
+                US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_freecom_reset(struct us_data *us);
-extern int freecom_init (struct us_data *us);
+UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
+                "Olympus",
+                "MAUSB-10 (Alauda)",
+                US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
new file mode 100644
index 000000000000..44be6d75dab6
--- /dev/null
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -0,0 +1,34 @@
+/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ *      with support for ATACB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+                defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+                "Cypress",
+                "Cypress AT2LP",
+                US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+                "Cypress",
+                "Cypress ISD-300LP",
+                US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
new file mode 100644
index 000000000000..c9298ce9f223
--- /dev/null
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -0,0 +1,98 @@
+/* Unusual Devices File for the Datafab USB Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+                defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
+                "Datafab",
+                "MDCFE-B USB CF Reader",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver.  Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+                "SIIG/Datafab",
+                "SIIG/Datafab Memory Stick+CF Reader/Writer",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+                "Datafab/Unknown",
+                "MD2/MD3 Disk enclosure",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+                "Datafab/Unknown",
+                "Datafab-based Reader",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+                "Datafab/Unknown",
+                "Datafab-based Reader",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+                "PNY/Datafab",
+                "PNY/Datafab CF+SM Reader",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+                "Simple Tech/Datafab",
+                "Simple Tech/Datafab CF+SM Reader",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+                "Datafab Systems, Inc.",
+                "USB to CF + SM Combo (LC1)",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+/* Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
+                "DataFab Systems Inc.",
+                "USB CF+MS",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+                "Acomdata",
+                "CF",
+                US_SC_SCSI, US_PR_DATAFAB, NULL,
+                US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index cfde74a6faa3..1c1f643e8a78 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -53,6 +53,11 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+                !defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
@@ -80,18 +85,6 @@ UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
                 "CD-Writer+",
                 US_SC_8070, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
-                "HP",
-                "CD-Writer+ 8200e",
-                US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-
-UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
-                "HP",
-                "CD-Writer+ CD-4e",
-                US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-#endif
-
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
                 "HP",
@@ -246,12 +239,7 @@ UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
-                "Microtech",
-                "CameraMate (DPCM_USB)",
-                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
                 "Microtech",
                 "CameraMate",
@@ -288,13 +276,6 @@ UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_KARMA
-UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
-                "Rio",
-                "Rio Karma",
-                US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
-#endif
-
 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
  * Obviously the PROM has not been customized by the VAR;
  * the Vendor and Product string descriptors are:
@@ -375,22 +356,6 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
                 US_SC_DEVICE, US_PR_CB, NULL,
                 US_FL_MAX_SECTORS_MIN),
 
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-/* CY7C68300 : support atacb */
-UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
-                "Cypress",
-                "Cypress AT2LP",
-                US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-                0),
-
-/* CY7C68310 : support atacb and atacb2 */
-UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
-                "Cypress",
-                "Cypress ISD-300LP",
-                US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-                0),
-#endif
-
 /* Reported by Simon Levitt <simon@whattf.com>
  * This entry needs Sub and Proto fields */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
@@ -467,20 +432,7 @@ UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
                 US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
-                "Sandisk",
-                "ImageMate SDDR09",
-                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-                0),
-
-/* This entry is from Andries.Brouwer@cwi.nl */
-UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
-                "SCM Microsystems",
-                "eUSB SmartMedia / CompactFlash Adapter",
-                US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
-                0),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
                 "SCM Microsystems",
                 "eUSB CompactFlash Adapter",
@@ -535,14 +487,6 @@ UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
                 "CD-RW Device",
                 US_SC_8020, US_PR_CB, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
-                "Shuttle/SCM",
-                "USBAT-02",
-                US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-                US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
                 "Samsung",
@@ -645,14 +589,6 @@ UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
-                "Sony",
-                "Portable USB Harddrive V2",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-#endif
-
 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
                 "Sony",
@@ -749,13 +685,6 @@ UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
                 "Silicon Media R/W",
                 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
-                "Fujifilm",
-                "DPC-R1 (Alauda)",
-                US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
 /* Reported by RTE <raszilki@yandex.ru> */
 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
                 "JetFlash",
@@ -798,32 +727,6 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
                 US_SC_SCSI, US_PR_BULK, NULL,
                 US_FL_NEED_OVERRIDE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
-                "In-System",
-                "USB/IDE Bridge (ATA/ATAPI)",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
-                "In-System",
-                "Portable USB Harddrive V2",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
-                "In-System",
-                "Portable USB Harddrive V2",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-
-UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
-                "In-System",
-                "USB Storage Adapter V2",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-#endif
-
 /* Submitted by Sven Anderson <sven-linux@anderson.de>
  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
@@ -877,14 +780,6 @@ UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
                 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
                 0),
 
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
-                "Lexar",
-                "Jumpshot USB CF Reader",
-                US_SC_SCSI, US_PR_JUMPSHOT, NULL,
-                US_FL_NEED_OVERRIDE ),
-#endif
-
 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
                 "Lexar",
@@ -935,14 +830,6 @@ UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
                 "Floppy Drive",
                 US_SC_UFI, US_PR_CB, NULL, 0 ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
-                "Olympus",
-                "Camedia MAUSB-2",
-                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-                0),
-#endif
-
 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
                 "SigmaTel",
@@ -1043,35 +930,12 @@ UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY ),
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
-                "Sandisk",
-                "ImageMate SDDR-05b",
-                US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
-                US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
                 "Sandisk",
                 "ImageMate SDDR-12",
                 US_SC_SCSI, US_PR_CB, NULL,
                 US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
-                "Sandisk",
-                "ImageMate SDDR-09",
-                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-                0),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
-                "Freecom",
-                "USB-IDE",
-                US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
-#endif
-
 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
                 "Freecom Technologies",
@@ -1091,12 +955,7 @@ UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
                 US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
-                "Microtech",
-                "CameraMate (DPCM_USB)",
-                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
                 "Microtech",
                 "CameraMate",
@@ -1104,108 +963,6 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
                 US_FL_SINGLE_LUN ),
 #endif
 
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
-                "Olympus",
-                "MAUSB-10 (Alauda)",
-                US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
-                "Datafab",
-                "MDCFE-B USB CF Reader",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-/*
- * The following Datafab-based devices may or may not work
- * using the current driver...the 0xffff is arbitrary since I
- * don't know what device versions exist for these guys.
- *
- * The 0xa003 and 0xa004 devices in particular I'm curious about.
- * I'm told they exist but so far nobody has come forward to say that
- * they work with this driver.  Given the success we've had getting
- * other Datafab-based cards operational with this driver, I've decided
- * to leave these two devices in the list.
- */
-UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
-                "SIIG/Datafab",
-                "SIIG/Datafab Memory Stick+CF Reader/Writer",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
-UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
-                "Datafab/Unknown",
-                "MD2/MD3 Disk enclosure",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                US_FL_SINGLE_LUN ),
-
-UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
-                "Datafab/Unknown",
-                "Datafab-based Reader",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
-                "Datafab/Unknown",
-                "Datafab-based Reader",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
-                "PNY/Datafab",
-                "PNY/Datafab CF+SM Reader",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
-                "Simple Tech/Datafab",
-                "Simple Tech/Datafab CF+SM Reader",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-#endif
-                
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* Contributed by Peter Waechtler */
-UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
-                "Datafab",
-                "MDSM-B reader",
-                US_SC_SCSI, US_PR_SDDR55, NULL,
-                US_FL_FIX_INQUIRY ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Submitted by Olaf Hering <olh@suse.de> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-                "Datafab Systems, Inc.",
-                "USB to CF + SM Combo (LC1)",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-/* SM part - aeb <Andries.Brouwer@cwi.nl> */
-UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
-                "Datafab Systems, Inc.",
-                "USB to CF + SM Combo (LC1)",
-                US_SC_SCSI, US_PR_SDDR55, NULL,
-                US_FL_SINGLE_LUN ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Reported by Felix Moeller <felix@derklecks.de>
- * in Germany this is sold by Hama with the productnumber 46952
- * as "DualSlot CompactFlash(TM) & MStick Drive USB"
- */
-UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
-                "DataFab Systems Inc.",
-                "USB CF+MS",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                0 ),
-
-#endif
-
 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
  * Only revision 1.13 tested (same for all of the above devices,
  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
@@ -1409,29 +1166,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_SANE_SENSE ),
 
-#ifdef CONFIG_USB_STORAGE_ISD200
-UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
-                "ATI",
-                "USB Cable 205",
-                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
-                0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-                "Acomdata",
-                "CF",
-                US_SC_SCSI, US_PR_DATAFAB, NULL,
-                US_FL_SINGLE_LUN ),
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
-                "Acomdata",
-                "SM",
-                US_SC_SCSI, US_PR_SDDR55, NULL,
-                US_FL_SINGLE_LUN ),
-#endif
-
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
                 "Maxtor",
                 "USB to SATA",
@@ -1448,23 +1182,6 @@ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_SINGLE_LUN ),
 
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
- * Needed for OneTouch extension to usb-storage
- *
- */
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-        UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
-                        "Maxtor",
-                        "OneTouch External Harddrive",
-                        US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-                        0),
-        UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
-                        "Maxtor",
-                        "OneTouch External Harddrive",
-                        US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
-                        0),
-#endif
-
 /* Submitted by Joris Struyve <joris@struyve.be> */
 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
                 "Medion",
@@ -2117,14 +1834,6 @@ UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
                 "Micro Mini 1GB",
                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR55
-UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
-                "Sandisk",
-                "ImageMate SDDR55",
-                US_SC_SCSI, US_PR_SDDR55, NULL,
-                US_FL_SINGLE_LUN),
-#endif
-
 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
                 "DataStor",
diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_freecom.h
index fbada898d56b..375867942391 100644
--- a/drivers/usb/storage/cypress_atacb.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,8 +1,4 @@
-/*
- * Support for emulating SAT (ata pass through) on devices based
- *       on the Cypress USB/ATA bridge supporting ATACB.
- *
- * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+/* Unusual Devices File for the Freecom USB/IDE adaptor
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -19,7 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _CYPRESS_ATACB_H_
-#define _CYPRESS_ATACB_H_
-extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*);
-#endif
+#if defined(CONFIG_USB_STORAGE_FREECOM) || \
+                defined(CONFIG_USB_STORAGE_FREECOM_MODULE)
+
+UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
+                "Freecom",
+                "USB-IDE",
+                US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
new file mode 100644
index 000000000000..0d99dde3382a
--- /dev/null
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -0,0 +1,57 @@
+/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ISD200) || \
+                defined(CONFIG_USB_STORAGE_ISD200_MODULE)
+
+UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
+                "Sony",
+                "Portable USB Harddrive V2",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
+                "In-System",
+                "USB/IDE Bridge (ATA/ATAPI)",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
+                "In-System",
+                "Portable USB Harddrive V2",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
+                "In-System",
+                "Portable USB Harddrive V2",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
+                "In-System",
+                "USB Storage Adapter V2",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
+                "ATI",
+                "USB Cable 205",
+                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+                0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/unusual_jumpshot.h
index a815a0470c84..2e549b1c2c62 100644
--- a/drivers/usb/storage/sddr55.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,10 +1,4 @@
-/* Driver for SanDisk SDDR-55 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2002 Simon Munton
- *
- * See sddr55.c for more explanation
+/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -21,12 +15,13 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_SHUTTLE_EUSB_SDDR55_H
-#define _USB_SHUTTLE_EUSB_SDDR55_H
-
-/* Sandisk SDDR-55 stuff */
+#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
+                defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
 
-extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int sddr55_reset(struct us_data *us);
+UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
+                "Lexar",
+                "Jumpshot USB CF Reader",
+                US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+                US_FL_NEED_OVERRIDE),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/unusual_karma.h
index 0a35f4fa78f8..12ae3a03e802 100644
--- a/drivers/usb/storage/isd200.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,11 +1,4 @@
-/* Header File for In-System Design, Inc. ISD200 ASIC
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 In-System Design, Inc. (support@in-system.com)
- *
- * See isd200.c for more information.
+/* Unusual Devices File for the Rio Karma
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -22,10 +15,12 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_ISD200_H
-#define _USB_ISD200_H
+#if defined(CONFIG_USB_STORAGE_KARMA) || \
+                defined(CONFIG_USB_STORAGE_KARMA_MODULE)
 
-extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us);
-extern int isd200_Initialization(struct us_data *us);
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+                "Rio",
+                "Rio Karma",
+                US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
new file mode 100644
index 000000000000..bd9306b637df
--- /dev/null
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -0,0 +1,36 @@
+/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
+                defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
+
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ */
+UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
+                "Maxtor",
+                "OneTouch External Harddrive",
+                US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+                0),
+
+UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
+                "Maxtor",
+                "OneTouch External Harddrive",
+                US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+                0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
new file mode 100644
index 000000000000..50cab511a4d7
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -0,0 +1,56 @@
+/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+                defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+                "Microtech",
+                "CameraMate (DPCM_USB)",
+                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
+                "Sandisk",
+                "ImageMate SDDR09",
+                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+                0),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+                "SCM Microsystems",
+                "eUSB SmartMedia / CompactFlash Adapter",
+                US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+                0),
+
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
+                "Olympus",
+                "Camedia MAUSB-2",
+                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+                0),
+
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
+                "Sandisk",
+                "ImageMate SDDR-09",
+                US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+                0),
+
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+                "Microtech",
+                "CameraMate (DPCM_USB)",
+                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
new file mode 100644
index 000000000000..ae81ef7a1cfd
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -0,0 +1,44 @@
+/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR55) || \
+                defined(CONFIG_USB_STORAGE_SDDR55_MODULE)
+
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+                "Datafab",
+                "MDSM-B reader",
+                US_SC_SCSI, US_PR_SDDR55, NULL,
+                US_FL_FIX_INQUIRY),
+
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
+                "Datafab Systems, Inc.",
+                "USB to CF + SM Combo (LC1)",
+                US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+                "Acomdata",
+                "SM",
+                US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
+                "Sandisk",
+                "ImageMate SDDR55",
+                US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
new file mode 100644
index 000000000000..80e869f10180
--- /dev/null
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -0,0 +1,43 @@
+/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+                defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
+                "HP",
+                "CD-Writer+ 8200e",
+                US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
+                "HP",
+                "CD-Writer+ CD-4e",
+                US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
+                "Shuttle/SCM",
+                "USBAT-02",
+                US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+                US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+                "Sandisk",
+                "ImageMate SDDR-05b",
+                US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+                US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 4becf495ca2d..8060b85fe1a3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -5,7 +5,7 @@
  *
  * Developed with the assistance of:
  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
- *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
@@ -66,39 +66,6 @@
 #include "debug.h"
 #include "initializers.h"
 
-#ifdef CONFIG_USB_STORAGE_USBAT
-#include "shuttle_usbat.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#include "sddr09.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-#include "sddr55.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_FREECOM
-#include "freecom.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ISD200
-#include "isd200.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#include "datafab.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#include "jumpshot.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ONETOUCH
-#include "onetouch.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-#include "alauda.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_KARMA
-#include "karma.h"
-#endif
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-#include "cypress_atacb.h"
-#endif
 #include "sierra_ms.h"
 #include "option_ms.h"
 
@@ -118,36 +85,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 
 /*
  * The entries in this table correspond, line for line,
- * with the entries of us_unusual_dev_list[].
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
-#ifndef CONFIG_USB_LIBUSUAL
-
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-                    vendorName, productName,useProtocol, useTransport, \
-                    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV   UNUSUAL_DEV
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = (USB_US_TYPE_STOR<<24) }
-
-static struct usb_device_id storage_usb_ids [] = {
-
-#       include "unusual_devs.h"
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-#undef USUAL_DEV
-        /* Terminating entry */
-        { }
-};
-
-MODULE_DEVICE_TABLE (usb, storage_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/* This is the list of devices we recognize, along with their flag data */
 
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
@@ -179,18 +118,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #       include "unusual_devs.h" 
-#       undef UNUSUAL_DEV
-#       undef COMPLIANT_DEV
-#       undef USUAL_DEV
-
-        /* Terminating entry */
-        { NULL }
+        { }             /* Terminating entry */
 };
 
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
 
 #ifdef CONFIG_PM        /* Minimal support for suspend and resume */
 
-static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
@@ -207,8 +145,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message)
         mutex_unlock(&us->dev_mutex);
         return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
 
-static int storage_resume(struct usb_interface *iface)
+int usb_stor_resume(struct usb_interface *iface)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
@@ -221,8 +160,9 @@ static int storage_resume(struct usb_interface *iface)
         mutex_unlock(&us->dev_mutex);
         return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_resume);
 
-static int storage_reset_resume(struct usb_interface *iface)
+int usb_stor_reset_resume(struct usb_interface *iface)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
@@ -235,6 +175,7 @@ static int storage_reset_resume(struct usb_interface *iface)
          * the device */
         return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 
 #endif /* CONFIG_PM */
 
@@ -243,7 +184,7 @@ static int storage_reset_resume(struct usb_interface *iface)
  * a USB port reset, whether from this driver or a different one.
  */
 
-static int storage_pre_reset(struct usb_interface *iface)
+int usb_stor_pre_reset(struct usb_interface *iface)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
@@ -253,8 +194,9 @@ static int storage_pre_reset(struct usb_interface *iface)
         mutex_lock(&us->dev_mutex);
         return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
 
-static int storage_post_reset(struct usb_interface *iface)
+int usb_stor_post_reset(struct usb_interface *iface)
 {
         struct us_data *us = usb_get_intfdata(iface);
 
@@ -269,6 +211,7 @@ static int storage_post_reset(struct usb_interface *iface)
         mutex_unlock(&us->dev_mutex);
         return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 
 /*
  * fill_inquiry_response takes an unsigned char array (which must
@@ -311,6 +254,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
 
         usb_stor_set_xfer_buf(data, data_len, us->srb);
 }
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
 
 static int usb_stor_control_thread(void * __us)
 {
@@ -551,20 +495,13 @@ static void adjust_quirks(struct us_data *us)
                         vid, pid, f);
 }
 
-/* Find an unusual_dev descriptor (always succeeds in the current code) */
-static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
-{
-        const int id_index = id - storage_usb_ids;
-        return &us_unusual_dev_list[id_index];
-}
-
 /* Get the unusual_devs entries and the string descriptors */
-static int get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+                struct us_unusual_dev *unusual_dev)
 {
         struct usb_device *dev = us->pusb_dev;
         struct usb_interface_descriptor *idesc =
                 &us->pusb_intf->cur_altsetting->desc;
-        struct us_unusual_dev *unusual_dev = find_unusual(id);
 
         /* Store the entries */
         us->unusual_dev = unusual_dev;
@@ -629,7 +566,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 }
 
 /* Get the transport settings */
-static int get_transport(struct us_data *us)
+static void get_transport(struct us_data *us)
 {
         switch (us->protocol) {
         case US_PR_CB:
@@ -651,100 +588,11 @@ static int get_transport(struct us_data *us)
                 us->transport = usb_stor_Bulk_transport;
                 us->transport_reset = usb_stor_Bulk_reset;
                 break;
-
-#ifdef CONFIG_USB_STORAGE_USBAT
-        case US_PR_USBAT:
-                us->transport_name = "Shuttle USBAT";
-                us->transport = usbat_transport;
-                us->transport_reset = usb_stor_CB_reset;
-                us->max_lun = 1;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
-        case US_PR_EUSB_SDDR09:
-                us->transport_name = "EUSB/SDDR09";
-                us->transport = sddr09_transport;
-                us->transport_reset = usb_stor_CB_reset;
-                us->max_lun = 0;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_SDDR55
-        case US_PR_SDDR55:
-                us->transport_name = "SDDR55";
-                us->transport = sddr55_transport;
-                us->transport_reset = sddr55_reset;
-                us->max_lun = 0;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DPCM
-        case US_PR_DPCM_USB:
-                us->transport_name = "Control/Bulk-EUSB/SDDR09";
-                us->transport = dpcm_transport;
-                us->transport_reset = usb_stor_CB_reset;
-                us->max_lun = 1;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-        case US_PR_FREECOM:
-                us->transport_name = "Freecom";
-                us->transport = freecom_transport;
-                us->transport_reset = usb_stor_freecom_reset;
-                us->max_lun = 0;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-        case US_PR_DATAFAB:
-                us->transport_name  = "Datafab Bulk-Only";
-                us->transport = datafab_transport;
-                us->transport_reset = usb_stor_Bulk_reset;
-                us->max_lun = 1;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-        case US_PR_JUMPSHOT:
-                us->transport_name  = "Lexar Jumpshot Control/Bulk";
-                us->transport = jumpshot_transport;
-                us->transport_reset = usb_stor_Bulk_reset;
-                us->max_lun = 1;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-        case US_PR_ALAUDA:
-                us->transport_name  = "Alauda Control/Bulk";
-                us->transport = alauda_transport;
-                us->transport_reset = usb_stor_Bulk_reset;
-                us->max_lun = 1;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_KARMA
-        case US_PR_KARMA:
-                us->transport_name = "Rio Karma/Bulk";
-                us->transport = rio_karma_transport;
-                us->transport_reset = usb_stor_Bulk_reset;
-                break;
-#endif
-
-        default:
-                return -EIO;
         }
-        US_DEBUGP("Transport: %s\n", us->transport_name);
-
-        /* fix for single-lun devices */
-        if (us->fflags & US_FL_SINGLE_LUN)
-                us->max_lun = 0;
-        return 0;
 }
 
 /* Get the protocol settings */
-static int get_protocol(struct us_data *us)
+static void get_protocol(struct us_data *us)
 {
         switch (us->subclass) {
         case US_SC_RBC:
@@ -779,26 +627,7 @@ static int get_protocol(struct us_data *us)
                 us->protocol_name = "Uniform Floppy Interface (UFI)";
                 us->proto_handler = usb_stor_ufi_command;
                 break;
-
-#ifdef CONFIG_USB_STORAGE_ISD200
-        case US_SC_ISD200:
-                us->protocol_name = "ISD200 ATA/ATAPI";
-                us->proto_handler = isd200_ata_command;
-                break;
-#endif
-
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-        case US_SC_CYP_ATACB:
-                us->protocol_name = "Transparent SCSI with Cypress ATACB";
-                us->proto_handler = cypress_atacb_passthrough;
-                break;
-#endif
-
-        default:
-                return -EIO;
         }
-        US_DEBUGP("Protocol: %s\n", us->protocol_name);
-        return 0;
 }
 
 /* Get the pipe settings */
@@ -846,12 +675,12 @@ static int get_pipes(struct us_data *us)
         us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
         us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
         us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
-                ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+                usb_endpoint_num(ep_out));
         us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 
-                ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+                usb_endpoint_num(ep_in));
         if (ep_int) {
                 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
-                        ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+                        usb_endpoint_num(ep_int));
                 us->ep_bInterval = ep_int->bInterval;
         }
         return 0;
@@ -1012,17 +841,15 @@ static int usb_stor_scan_thread(void * __us)
 }
 
 
-/* Probe to see if we can drive a newly-connected USB device */
-static int storage_probe(struct usb_interface *intf,
-                         const struct usb_device_id *id)
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+                struct usb_interface *intf,
+                const struct usb_device_id *id,
+                struct us_unusual_dev *unusual_dev)
 {
         struct Scsi_Host *host;
         struct us_data *us;
         int result;
-        struct task_struct *th;
-
-        if (usb_usual_check_type(id, USB_US_TYPE_STOR))
-                return -ENXIO;
 
         US_DEBUGP("USB Mass Storage device detected\n");
 
@@ -1041,7 +868,7 @@ static int storage_probe(struct usb_interface *intf,
          * Allow 16-byte CDBs and thus > 2TB
          */
         host->max_cmd_len = 16;
-        us = host_to_us(host);
+        *pus = us = host_to_us(host);
         memset(us, 0, sizeof(struct us_data));
         mutex_init(&(us->dev_mutex));
         init_completion(&us->cmnd_ready);
@@ -1054,24 +881,46 @@ static int storage_probe(struct usb_interface *intf,
         if (result)
                 goto BadDevice;
 
-        /*
-         * Get the unusual_devs entries and the descriptors
-         *
-         * id_index is calculated in the declaration to be the index number
-         * of the match from the usb_device_id table, so we can find the
-         * corresponding entry in the private table.
-         */
-        result = get_device_info(us, id);
+        /* Get the unusual_devs entries and the descriptors */
+        result = get_device_info(us, id, unusual_dev);
         if (result)
                 goto BadDevice;
 
-        /* Get the transport, protocol, and pipe settings */
-        result = get_transport(us);
-        if (result)
-                goto BadDevice;
-        result = get_protocol(us);
-        if (result)
+        /* Get standard transport and protocol settings */
+        get_transport(us);
+        get_protocol(us);
+
+        /* Give the caller a chance to fill in specialized transport
+         * or protocol settings.
+         */
+        return 0;
+
+BadDevice:
+        US_DEBUGP("storage_probe() failed\n");
+        release_everything(us);
+        return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+        struct task_struct *th;
+        int result;
+
+        /* Make sure the transport and protocol have both been set */
+        if (!us->transport || !us->proto_handler) {
+                result = -ENXIO;
                 goto BadDevice;
+        }
+        US_DEBUGP("Transport: %s\n", us->transport_name);
+        US_DEBUGP("Protocol: %s\n", us->protocol_name);
+
+        /* fix for single-lun devices */
+        if (us->fflags & US_FL_SINGLE_LUN)
+                us->max_lun = 0;
+
+        /* Find the endpoints and calculate pipe values */
         result = get_pipes(us);
         if (result)
                 goto BadDevice;
@@ -1080,7 +929,7 @@ static int storage_probe(struct usb_interface *intf,
         result = usb_stor_acquire_resources(us);
         if (result)
                 goto BadDevice;
-        result = scsi_add_host(host, &intf->dev);
+        result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
         if (result) {
                 printk(KERN_WARNING USB_STORAGE
                         "Unable to add the scsi host\n");
@@ -1108,9 +957,10 @@ BadDevice:
         release_everything(us);
         return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
 
-/* Handle a disconnect event from the USB core */
-static void storage_disconnect(struct usb_interface *intf)
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
 {
         struct us_data *us = usb_get_intfdata(intf);
 
@@ -1118,6 +968,42 @@ static void storage_disconnect(struct usb_interface *intf)
         quiesce_and_remove_host(us);
         release_everything(us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+                         const struct usb_device_id *id)
+{
+        struct us_data *us;
+        int result;
+
+        /*
+         * If libusual is configured, let it decide whether a standard
+         * device should be handled by usb-storage or by ub.
+         * If the device isn't standard (is handled by a subdriver
+         * module) then don't accept it.
+         */
+        if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
+                        usb_usual_ignore_device(intf))
+                return -ENXIO;
+
+        /*
+         * Call the general probe procedures.
+         *
+         * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+         * table, so we use the index of the id entry to find the
+         * corresponding unusual_devs entry.
+         */
+        result = usb_stor_probe1(&us, intf, id,
+                        (id - usb_storage_usb_ids) + us_unusual_dev_list);
+        if (result)
+                return result;
+
+        /* No special transport or protocol settings in the main module */
+
+        result = usb_stor_probe2(us);
+        return result;
+}
 
 /***********************************************************************
  * Initialization and registration
@@ -1126,15 +1012,13 @@ static void storage_disconnect(struct usb_interface *intf)
 static struct usb_driver usb_storage_driver = {
         .name =         "usb-storage",
         .probe =        storage_probe,
-        .disconnect =   storage_disconnect,
-#ifdef CONFIG_PM
-        .suspend =      storage_suspend,
-        .resume =       storage_resume,
-        .reset_resume = storage_reset_resume,
-#endif
-        .pre_reset =    storage_pre_reset,
-        .post_reset =   storage_post_reset,
-        .id_table =     storage_usb_ids,
+        .disconnect =   usb_stor_disconnect,
+        .suspend =      usb_stor_suspend,
+        .resume =       usb_stor_resume,
+        .reset_resume = usb_stor_reset_resume,
+        .pre_reset =    usb_stor_pre_reset,
+        .post_reset =   usb_stor_post_reset,
+        .id_table =     usb_storage_usb_ids,
         .soft_unbind =  1,
 };
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 65e674e4be99..2609efb2bd7e 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend        NULL
+#define usb_stor_resume         NULL
+#define usb_stor_reset_resume   NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+                struct usb_interface *intf,
+                const struct usb_device_id *id,
+                struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
 #endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000000..468bde7d1971
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,116 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+  .driver_info = ((useType)<<24) }
+
+struct usb_device_id usb_storage_usb_ids[] = {
+#       include "unusual_devs.h"
+        { }             /* Terminating entry */
+};
+EXPORT_SYMBOL_GPL(usb_storage_usb_ids);
+
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+        u16     vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+                    vendorName, productName, useProtocol, useTransport, \
+                    initFunction, flags) \
+{                                       \
+        .vid    = id_vendor,            \
+        .pid    = id_product,           \
+        .bcdmin = bcdDeviceMin,         \
+        .bcdmax = bcdDeviceMax,         \
+}
+
+static struct ignore_entry ignore_ids[] = {
+#       include "unusual_alauda.h"
+#       include "unusual_cypress.h"
+#       include "unusual_datafab.h"
+#       include "unusual_freecom.h"
+#       include "unusual_isd200.h"
+#       include "unusual_jumpshot.h"
+#       include "unusual_karma.h"
+#       include "unusual_onetouch.h"
+#       include "unusual_sddr09.h"
+#       include "unusual_sddr55.h"
+#       include "unusual_usbat.h"
+        { }             /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+        struct usb_device *udev;
+        unsigned vid, pid, bcd;
+        struct ignore_entry *p;
+
+        udev = interface_to_usbdev(intf);
+        vid = le16_to_cpu(udev->descriptor.idVendor);
+        pid = le16_to_cpu(udev->descriptor.idProduct);
+        bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+        for (p = ignore_ids; p->vid; ++p) {
+                if (p->vid == vid && p->pid == pid &&
+                                p->bcdmin <= bcd && p->bcdmax >= bcd)
+                        return -ENXIO;
+        }
+        return 0;
+}
+EXPORT_SYMBOL_GPL(usb_usual_ignore_device);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index be76084c8d7e..60ba631e99c2 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -410,7 +410,9 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i
         }
 
         /* let the user know what node this device is now attached to */
-        info("USB Skeleton device now attached to USBSkel-%d", interface->minor);
+        dev_info(&interface->dev,
+                 "USB Skeleton device now attached to USBSkel-%d",
+                 interface->minor);
         return 0;
 
 error:
@@ -441,7 +443,7 @@ static void skel_disconnect(struct usb_interface *interface)
         /* decrement our usage count */
         kref_put(&dev->kref, skel_delete);
 
-        info("USB Skeleton #%d now disconnected", minor);
+        dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
 }
 
 static void skel_draw_down(struct usb_skel *dev)
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index 1335cbe1191d..25eae405f622 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -638,8 +638,7 @@ static void cbaf_disconnect(struct usb_interface *iface)
         usb_put_intf(iface);
         kfree(cbaf->buffer);
         /* paranoia: clean up crypto keys */
-        memset(cbaf, 0, sizeof(*cbaf));
-        kfree(cbaf);
+        kzfree(cbaf);
 }
 
 static struct usb_device_id cbaf_id_table[] = {
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 8e18141bb2e0..f0aac0cf315a 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -889,6 +889,8 @@ static void wusb_dev_add_ncb(struct usb_device *usb_dev)
         if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
                 return;         /* skip non wusb and wusb RHs */
 
+        usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED);
+
         wusbhc = wusbhc_get_by_usb_dev(usb_dev);
         if (wusbhc == NULL)
                 goto error_nodev;
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index f4aa28eca70d..8118db7f1d8d 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -312,6 +312,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
         result = wusb_set_dev_addr(wusbhc, wusb_dev, 0);
         if (result < 0)
                 goto error_addr0;
+        usb_set_device_state(usb_dev, USB_STATE_DEFAULT);
         usb_ep0_reinit(usb_dev);
 
         /* Set new (authenticated) address. */
@@ -327,6 +328,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
         result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address);
         if (result < 0)
                 goto error_addr;
+        usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
         usb_ep0_reinit(usb_dev);
         usb_dev->authenticated = 1;
 error_addr: