OHCI: make autostop conditional on CONFIG_PM

Unlike UHCI, OHCI does not exert any DMA load on the system when no
devices are connected.  Consequently there is no advantage to doing
an autostop other than the power savings, so we shouldn't compile the
necessary code unless CONFIG_PM is enabled.

This patch (as820) makes the root-hub suspend and resume routines
conditional on CONFIG_PM.  It also prevents autostop from activating
if the device_may_wakeup flag isn't set; some people use this flag to
alert the driver about Resume-Detect bugs in the hardware.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 79 insertions, 54 deletions

diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 4c9492779ede..2441642cb7b4 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -56,7 +56,6 @@ static void finish_unlinks (struct ohci_hcd *, u16);
 
 #ifdef  CONFIG_PM
 static int ohci_restart(struct ohci_hcd *ohci);
-#endif
 
 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
 __releases(ohci->lock)
@@ -187,7 +186,6 @@ __acquires(ohci->lock)
                 ohci_dbg (ohci, "lost power\n");
                 status = -EBUSY;
         }
-#ifdef  CONFIG_PM
         if (status == -EBUSY) {
                 if (!autostopped) {
                         spin_unlock_irq (&ohci->lock);
@@ -197,7 +195,6 @@ __acquires(ohci->lock)
                 }
                 return status;
         }
-#endif
         if (status != -EINPROGRESS)
                 return status;
         if (autostopped)
@@ -291,8 +288,6 @@ skip_resume:
         return 0;
 }
 
-#ifdef  CONFIG_PM
-
 static int ohci_bus_suspend (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
@@ -330,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
         return rc;
 }
 
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+
+        case OHCI_USB_OPER:
+                /* keep on polling until we know a device is connected
+                 * and RHSC is enabled */
+                if (!ohci->autostop) {
+                        if (any_connected ||
+                                        !device_may_wakeup(&ohci_to_hcd(ohci)
+                                                ->self.root_hub->dev)) {
+                                if (ohci_readl(ohci, &ohci->regs->intrenable) &
+                                                OHCI_INTR_RHSC)
+                                        poll_rh = 0;
+                        } else {
+                                ohci->autostop = 1;
+                                ohci->next_statechange = jiffies + HZ;
+                        }
+
+                /* if no devices have been attached for one second, autostop */
+                } else {
+                        if (changed || any_connected) {
+                                ohci->autostop = 0;
+                                ohci->next_statechange = jiffies +
+                                                STATECHANGE_DELAY;
+                        } else if (time_after_eq(jiffies,
+                                                ohci->next_statechange)
+                                        && !ohci->ed_rm_list
+                                        && !(ohci->hc_control &
+                                                OHCI_SCHED_ENABLES)) {
+                                ohci_rh_suspend(ohci, 1);
+                        }
+                }
+                break;
+
+        /* if there is a port change, autostart or ask to be resumed */
+        case OHCI_USB_SUSPEND:
+        case OHCI_USB_RESUME:
+                if (changed) {
+                        if (ohci->autostop)
+                                ohci_rh_resume(ohci);
+                        else
+                                usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+                } else {
+                        /* everything is idle, no need for polling */
+                        poll_rh = 0;
+                }
+                break;
+        }
+        return poll_rh;
+}
+
+#else   /* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+        return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        /* keep on polling until RHSC is enabled */
+        if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+                poll_rh = 0;
+        return poll_rh;
+}
+
 #endif  /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -382,55 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 }
         }
 
-        hcd->poll_rh = 1;
-
-        /* carry out appropriate state changes */
-        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-
-        case OHCI_USB_OPER:
-                /* keep on polling until we know a device is connected
-                 * and RHSC is enabled */
-                if (!ohci->autostop) {
-                        if (any_connected) {
-                                if (ohci_readl(ohci, &ohci->regs->intrenable) &
-                                                OHCI_INTR_RHSC)
-                                        hcd->poll_rh = 0;
-                        } else {
-                                ohci->autostop = 1;
-                                ohci->next_statechange = jiffies + HZ;
-                        }
-
-                /* if no devices have been attached for one second, autostop */
-                } else {
-                        if (changed || any_connected) {
-                                ohci->autostop = 0;
-                                ohci->next_statechange = jiffies +
-                                                STATECHANGE_DELAY;
-                        } else if (device_may_wakeup(&hcd->self.root_hub->dev)
-                                        && time_after_eq(jiffies,
-                                                ohci->next_statechange)
-                                        && !ohci->ed_rm_list
-                                        && !(ohci->hc_control &
-                                                OHCI_SCHED_ENABLES)) {
-                                ohci_rh_suspend (ohci, 1);
-                        }
-                }
-                break;
-
-        /* if there is a port change, autostart or ask to be resumed */
-        case OHCI_USB_SUSPEND:
-        case OHCI_USB_RESUME:
-                if (changed) {
-                        if (ohci->autostop)
-                                ohci_rh_resume (ohci);
-                        else
-                                usb_hcd_resume_root_hub (hcd);
-                } else {
-                        /* everything is idle, no need for polling */
-                        hcd->poll_rh = 0;
-                }
-                break;
-        }
+        hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+                        any_connected);
 
 done:
         spin_unlock_irqrestore (&ohci->lock, flags);