musb: am35x: fix compile error due to control apis

commit 4814ced5116e3b73dc4f63eec84999739fc8ed11 (OMAP:
control: move plat-omap/control.h to mach-omap2/control.h)
moved <plat/control.h> to another location, preventing
drivers from accessing it, so we need to pass function
pointers from arch code to be able to talk to internal
PHY on AM35x.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 45 insertions, 85 deletions

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 62e65f0a7284..d5a3da37c90c 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -32,7 +32,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <plat/control.h>
 #include <plat/usb.h>
 
 #include "musb_core.h"
@@ -90,47 +89,6 @@ struct am35x_glue {
 };
 #define glue_to_musb(g)         platform_get_drvdata(g->musb)
 
-static inline void phy_on(void)
-{
-        unsigned long timeout = jiffies + msecs_to_jiffies(100);
-        u32 devconf2;
-
-        /*
-         * Start the on-chip PHY and its PLL.
-         */
-        devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-        devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-        devconf2 |= CONF2_PHY_PLLON;
-
-        omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-        DBG(1, "Waiting for PHY clock good...\n");
-        while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-                        & CONF2_PHYCLKGD)) {
-                cpu_relax();
-
-                if (time_after(jiffies, timeout)) {
-                        DBG(1, "musb PHY clock good timed out\n");
-                        break;
-                }
-        }
-}
-
-static inline void phy_off(void)
-{
-        u32 devconf2;
-
-        /*
-         * Power down the on-chip PHY.
-         */
-        devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-        devconf2 &= ~CONF2_PHY_PLLON;
-        devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-        omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
-
 /*
  * am35x_musb_enable - enable interrupts
  */
@@ -265,9 +223,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 {
         struct musb  *musb = hci;
         void __iomem *reg_base = musb->ctrl_base;
+        struct device *dev = musb->controller;
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
         unsigned long flags;
         irqreturn_t ret = IRQ_NONE;
-        u32 epintr, usbintr, lvl_intr;
+        u32 epintr, usbintr;
 
         spin_lock_irqsave(&musb->lock, flags);
 
@@ -356,9 +317,8 @@ eoi:
         /* EOI needs to be written for the IRQ to be re-asserted. */
         if (ret == IRQ_HANDLED || epintr || usbintr) {
                 /* clear level interrupt */
-                lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-                lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-                omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+                if (data->clear_irq)
+                        data->clear_irq();
                 /* write EOI */
                 musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
         }
@@ -374,37 +334,26 @@ eoi:
 
 static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
-        u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+        struct device *dev = musb->controller;
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
+        int     retval = 0;
 
-        devconf2 &= ~CONF2_OTGMODE;
-        switch (musb_mode) {
-#ifdef  CONFIG_USB_MUSB_HDRC_HCD
-        case MUSB_HOST:         /* Force VBUS valid, ID = 0 */
-                devconf2 |= CONF2_FORCE_HOST;
-                break;
-#endif
-#ifdef  CONFIG_USB_GADGET_MUSB_HDRC
-        case MUSB_PERIPHERAL:   /* Force VBUS valid, ID = 1 */
-                devconf2 |= CONF2_FORCE_DEVICE;
-                break;
-#endif
-#ifdef  CONFIG_USB_MUSB_OTG
-        case MUSB_OTG:          /* Don't override the VBUS/ID comparators */
-                devconf2 |= CONF2_NO_OVERRIDE;
-                break;
-#endif
-        default:
-                DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
-        }
+        if (data->set_mode)
+                data->set_mode(musb_mode);
+        else
+                retval = -EIO;
 
-        omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-        return 0;
+        return retval;
 }
 
 static int am35x_musb_init(struct musb *musb)
 {
+        struct device *dev = musb->controller;
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
         void __iomem *reg_base = musb->ctrl_base;
-        u32 rev, lvl_intr, sw_reset;
+        u32 rev;
 
         musb->mregs += USB_MENTOR_CORE_OFFSET;
 
@@ -421,39 +370,40 @@ static int am35x_musb_init(struct musb *musb)
         if (is_host_enabled(musb))
                 setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-        /* Global reset */
-        sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-        sw_reset |= AM35XX_USBOTGSS_SW_RST;
-        omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
-
-        sw_reset &= ~AM35XX_USBOTGSS_SW_RST;
-        omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+        /* Reset the musb */
+        if (data->reset)
+                data->reset();
 
         /* Reset the controller */
         musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
 
         /* Start the on-chip PHY and its PLL. */
-        phy_on();
+        if (data->set_phy_power)
+                data->set_phy_power(1);
 
         msleep(5);
 
         musb->isr = am35x_musb_interrupt;
 
         /* clear level interrupt */
-        lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-        lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-        omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+        if (data->clear_irq)
+                data->clear_irq();
 
         return 0;
 }
 
 static int am35x_musb_exit(struct musb *musb)
 {
+        struct device *dev = musb->controller;
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
+
         if (is_host_enabled(musb))
                 del_timer_sync(&otg_workaround);
 
-        phy_off();
+        /* Shutdown the on-chip PHY and its PLL. */
+        if (data->set_phy_power)
+                data->set_phy_power(0);
 
         otg_put_transceiver(musb->xceiv);
         usb_nop_xceiv_unregister();
@@ -630,8 +580,13 @@ static int __exit am35x_remove(struct platform_device *pdev)
 static int am35x_suspend(struct device *dev)
 {
         struct am35x_glue       *glue = dev_get_drvdata(dev);
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
+
+        /* Shutdown the on-chip PHY and its PLL. */
+        if (data->set_phy_power)
+                data->set_phy_power(0);
 
-        phy_off();
         clk_disable(glue->phy_clk);
         clk_disable(glue->clk);
 
@@ -641,9 +596,14 @@ static int am35x_suspend(struct device *dev)
 static int am35x_resume(struct device *dev)
 {
         struct am35x_glue       *glue = dev_get_drvdata(dev);
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+        struct omap_musb_board_data *data = plat->board_data;
         int                     ret;
 
-        phy_on();
+        /* Start the on-chip PHY and its PLL. */
+        if (data->set_phy_power)
+                data->set_phy_power(1);
+
         ret = clk_enable(glue->phy_clk);
         if (ret) {
                 dev_err(dev, "failed to enable PHY clock\n");