Merge branch 'cleanup-3.4' of git://github.com/hzhuang1/linux into next/cleanup

* 'cleanup-3.4' of git://github.com/hzhuang1/linux: (2 commits)
  rtc: sa1100: remove verification code of alarm
  rtc: sa1100: remove periodic code

(update to v3.3-rc5)

22 files changed, 182 insertions, 115 deletions

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d136b8f4c8a7..81e2c0d9c17d 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
                 return -ENODEV;
         dev->current_state = PCI_D0;
 
-        if (!dev->irq) {
+        /* The xHCI driver supports MSI and MSI-X,
+         * so don't fail if the BIOS doesn't provide a legacy IRQ.
+         */
+        if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
                 dev_err(&dev->dev,
                         "Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
                         pci_name(dev));
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index eb19cba34ac9..e1282328fc27 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
                         && device_can_wakeup(&hcd->self.root_hub->dev))
                 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
-        /* enable irqs just before we start the controller */
-        if (usb_hcd_is_primary_hcd(hcd)) {
+        /* enable irqs just before we start the controller,
+         * if the BIOS provides legacy PCI irqs.
+         */
+        if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
                 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
                 if (retval)
                         goto err_request_irq;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a0613d8f9be7..265c2f675d04 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
         if (type == HUB_INIT3)
                 goto init3;
 
-        /* After a resume, port power should still be on.
+        /* The superspeed hub except for root hub has to use Hub Depth
+         * value as an offset into the route string to locate the bits
+         * it uses to determine the downstream port number. So hub driver
+         * should send a set hub depth request to superspeed hub after
+         * the superspeed hub is set configuration in initialization or
+         * reset procedure.
+         *
+         * After a resume, port power should still be on.
          * For any other type of activation, turn it on.
          */
         if (type != HUB_RESUME) {
+                if (hdev->parent && hub_is_superspeed(hdev)) {
+                        ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+                                        HUB_SET_DEPTH, USB_RT_HUB,
+                                        hdev->level - 1, 0, NULL, 0,
+                                        USB_CTRL_SET_TIMEOUT);
+                        if (ret < 0)
+                                dev_err(hub->intfdev,
+                                                "set hub depth failed\n");
+                }
 
                 /* Speed up system boot by using a delayed_work for the
                  * hub's initial power-up delays.  This is pretty awkward
@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
                 goto fail;
         }
 
-        if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
-                ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-                                HUB_SET_DEPTH, USB_RT_HUB,
-                                hdev->level - 1, 0, NULL, 0,
-                                USB_CTRL_SET_TIMEOUT);
-
-                if (ret < 0) {
-                        message = "can't set hub depth";
-                        goto fail;
-                }
-        }
-
         /* Request the entire hub descriptor.
          * hub->descriptor can handle USB_MAXCHILDREN ports,
          * but the hub can/will return fewer bytes here.
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 6d87f288df4e..2c0cd824c667 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -418,7 +418,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 
         /* support autoresume for remote wakeup testing */
         if (autoresume)
-                sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+                loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 
         /* support OTG systems */
         if (gadget_is_otg(cdev->gadget)) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 91413cac97be..353cdd488b93 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -130,7 +130,7 @@ config USB_FSL_MPH_DR_OF
         tristate
 
 config USB_EHCI_FSL
-        bool "Support for Freescale on-chip EHCI USB controller"
+        bool "Support for Freescale PPC on-chip EHCI USB controller"
         depends on USB_EHCI_HCD && FSL_SOC
         select USB_EHCI_ROOT_HUB_TT
         select USB_FSL_MPH_DR_OF if OF
@@ -138,7 +138,7 @@ config USB_EHCI_FSL
           Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_MXC
-        bool "Support for Freescale on-chip EHCI USB controller"
+        bool "Support for Freescale i.MX on-chip EHCI USB controller"
         depends on USB_EHCI_HCD && ARCH_MXC
         select USB_EHCI_ROOT_HUB_TT
         ---help---
@@ -546,7 +546,7 @@ config USB_RENESAS_USBHS_HCD
 config USB_WHCI_HCD
         tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
         depends on EXPERIMENTAL
-        depends on PCI && USB
+        depends on PCI && USB && UWB
         select USB_WUSB
         select UWB_WHCI
         help
@@ -559,7 +559,7 @@ config USB_WHCI_HCD
 config USB_HWA_HCD
         tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
         depends on EXPERIMENTAL
-        depends on USB
+        depends on USB && UWB
         select USB_WUSB
         select UWB_HWA
         help
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index b556a72264d1..c26a82e83f6e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 }
 
-static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 {
         struct usb_hcd *hcd = ehci_to_hcd(ehci);
         struct fsl_usb2_platform_data *pdata;
@@ -299,12 +299,19 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 #endif
                 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
         }
+
+        if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) {
+                printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
+                return -ENODEV;
+        }
+        return 0;
 }
 
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
-        ehci_fsl_usb_setup(ehci);
+        if (ehci_fsl_usb_setup(ehci))
+                return -ENODEV;
         ehci_port_power(ehci, 0);
 
         return 0;
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 491806221165..bdf43e2adc51 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -45,5 +45,6 @@
 #define FSL_SOC_USB_PRICTRL     0x40c   /* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL      0x410   /* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL        0x500   /* NOTE: big-endian */
+#define CTRL_PHY_CLK_VALID      (1 << 17)
 #define SNOOP_SIZE_2GB          0x1e
 #endif                          /* _EHCI_FSL_H */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index caf87428ca43..7732d69e49e0 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -867,6 +867,22 @@ hc_init:
 
 static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 {
+        /* Skip Netlogic mips SoC's internal PCI USB controller.
+         * This device does not need/support EHCI/OHCI handoff
+         */
+        if (pdev->vendor == 0x184e)     /* vendor Netlogic */
+                return;
+        if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+                        pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+                        pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+                        pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+                return;
+
+        if (pci_enable_device(pdev) < 0) {
+                dev_warn(&pdev->dev, "Can't enable PCI device, "
+                                "BIOS handoff failed.\n");
+                return;
+        }
         if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
                 quirk_usb_handoff_uhci(pdev);
         else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
@@ -875,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
                 quirk_usb_disable_ehci(pdev);
         else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
                 quirk_usb_handoff_xhci(pdev);
+        pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 35e257f79c7b..557b6f32db86 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
          */
         memset(port_removable, 0, sizeof(port_removable));
         for (i = 0; i < ports; i++) {
-                portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+                portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
                 /* If a device is removable, PORTSC reports a 0, same as in the
                  * hub descriptor DeviceRemovable bits.
                  */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 36cbe2226a44..383fc857491c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
 }
 
 /*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
  * microframes, rounded down to nearest power of 2.
  */
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
-                struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+                struct usb_host_endpoint *ep, unsigned int desc_interval,
+                unsigned int min_exponent, unsigned int max_exponent)
 {
         unsigned int interval;
 
-        interval = fls(8 * ep->desc.bInterval) - 1;
-        interval = clamp_val(interval, 3, 10);
-        if ((1 << interval) != 8 * ep->desc.bInterval)
+        interval = fls(desc_interval) - 1;
+        interval = clamp_val(interval, min_exponent, max_exponent);
+        if ((1 << interval) != desc_interval)
                 dev_warn(&udev->dev,
                          "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
                          ep->desc.bEndpointAddress,
                          1 << interval,
-                         8 * ep->desc.bInterval);
+                         desc_interval);
 
         return interval;
 }
 
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+                struct usb_host_endpoint *ep)
+{
+        return xhci_microframes_to_exponent(udev, ep,
+                        ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+                struct usb_host_endpoint *ep)
+{
+        return xhci_microframes_to_exponent(udev, ep,
+                        ep->desc.bInterval * 8, 3, 10);
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
                 /* Max NAK rate */
                 if (usb_endpoint_xfer_control(&ep->desc) ||
                     usb_endpoint_xfer_bulk(&ep->desc)) {
-                        interval = ep->desc.bInterval;
+                        interval = xhci_parse_microframe_interval(udev, ep);
                         break;
                 }
                 /* Fall through - SS and HS isoc/int have same decoding */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6bbe3c3a7111..c939f5fdef9e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
                 /* hcd->irq is -1, we have MSI */
                 return 0;
 
+        if (!pdev->irq) {
+                xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+                return -EINVAL;
+        }
+
         /* fall back to legacy interrupt*/
         ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
                         hcd->irq_descr, hcd);
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index e61aa95f2d2a..1d5eda26fbd1 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -39,7 +39,8 @@
 
 #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
         && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
-        && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN)
+        && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
+        && !defined(CONFIG_MIPS)
 static inline void readsl(const void __iomem *addr, void *buf, int len)
         { insl((unsigned long)addr, buf, len); }
 static inline void readsw(const void __iomem *addr, void *buf, int len)
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 76d629345418..735ef4c2339a 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -118,7 +118,7 @@ config FSL_USB2_OTG
 
 config USB_MV_OTG
         tristate "Marvell USB OTG support"
-        depends on USB_MV_UDC && USB_SUSPEND
+        depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
         select USB_OTG
         select USB_OTG_UTILS
         help
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8dbf51a43c45..08a5575724cd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -136,6 +136,8 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
         { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
         { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+        { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+        { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
         { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
         { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
         { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ad654f8208ef..f770415305f8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -839,6 +839,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
         { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f994503df2dd..6f6058f0db1b 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1187,3 +1187,10 @@
  */
 /* ZigBee controller */
 #define FTDI_RF_R106            0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID        0xA951
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ea126a4490cd..b54afceb9611 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -788,7 +788,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
@@ -803,7 +802,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
-        /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
@@ -828,7 +826,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-        /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -836,7 +833,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
@@ -846,7 +842,6 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
@@ -855,6 +850,16 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
                 .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
@@ -875,23 +880,18 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1066,17 +1066,27 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+          0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-          0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
-        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 1d5deee3be52..f98800f2324c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -36,6 +36,11 @@ static const struct usb_device_id id_table[] = {
         {USB_DEVICE(0x413c, 0x8171)},   /* Dell Gobi QDL device */
         {USB_DEVICE(0x1410, 0xa001)},   /* Novatel Gobi Modem device */
         {USB_DEVICE(0x1410, 0xa008)},   /* Novatel Gobi QDL device */
+        {USB_DEVICE(0x1410, 0xa010)},   /* Novatel Gobi QDL device */
+        {USB_DEVICE(0x1410, 0xa011)},   /* Novatel Gobi QDL device */
+        {USB_DEVICE(0x1410, 0xa012)},   /* Novatel Gobi QDL device */
+        {USB_DEVICE(0x1410, 0xa013)},   /* Novatel Gobi QDL device */
+        {USB_DEVICE(0x1410, 0xa014)},   /* Novatel Gobi QDL device */
         {USB_DEVICE(0x0b05, 0x1776)},   /* Asus Gobi Modem device */
         {USB_DEVICE(0x0b05, 0x1774)},   /* Asus Gobi QDL device */
         {USB_DEVICE(0x19d2, 0xfff3)},   /* ONDA Gobi Modem device */
@@ -86,7 +91,16 @@ static const struct usb_device_id id_table[] = {
         {USB_DEVICE(0x16d8, 0x8002)},   /* CMDTech Gobi 2000 Modem device (VU922) */
         {USB_DEVICE(0x05c6, 0x9204)},   /* Gobi 2000 QDL device */
         {USB_DEVICE(0x05c6, 0x9205)},   /* Gobi 2000 Modem device */
+
+        {USB_DEVICE(0x05c6, 0x920c)},   /* Gobi 3000 QDL */
+        {USB_DEVICE(0x05c6, 0x920d)},   /* Gobi 3000 Composite */
+        {USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
+        {USB_DEVICE(0x1410, 0xa021)},   /* Novatel Gobi 3000 Composite */
+        {USB_DEVICE(0x413c, 0x8193)},   /* Dell Gobi 3000 QDL */
+        {USB_DEVICE(0x413c, 0x8194)},   /* Dell Gobi 3000 Composite */
         {USB_DEVICE(0x1199, 0x9013)},   /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+        {USB_DEVICE(0x12D1, 0x14F0)},   /* Sony Gobi 3000 QDL */
+        {USB_DEVICE(0x12D1, 0x14F1)},   /* Sony Gobi 3000 Composite */
         { }                             /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -123,8 +137,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
         spin_lock_init(&data->susp_lock);
 
-        usb_enable_autosuspend(serial->dev);
-
         switch (nintf) {
         case 1:
                 /* QDL mode */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8468eb769a29..75b838eff178 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
         { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
         { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+        { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1]
         { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
         { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
         { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+        { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
         { }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 2aac1953993b..f140f1b9d5c0 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -49,6 +49,10 @@
 #define MTS_MT9234ZBA_PRODUCT_ID        0xF115
 #define MTS_MT9234ZBAOLD_PRODUCT_ID     0x0319
 
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID                0x1a61
+#define ABBOTT_PRODUCT_ID               0x3410
+
 /* Commands */
 #define TI_GET_VERSION                  0x01
 #define TI_GET_PORT_STATUS              0x02
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3dd7da9fd504..db51ba16dc07 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us)
         struct Scsi_Host *host = us_to_host(us);
 
         /* If the device is really gone, cut short reset delays */
-        if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+        if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
                 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+                wake_up(&us->delay_wait);
+        }
 
-        /* Prevent SCSI-scanning (if it hasn't started yet)
-         * and wait for the SCSI-scanning thread to stop.
+        /* Prevent SCSI scanning (if it hasn't started yet)
+         * or wait for the SCSI-scanning routine to stop.
          */
-        set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
-        wake_up(&us->delay_wait);
-        wait_for_completion(&us->scanning_done);
+        cancel_delayed_work_sync(&us->scan_dwork);
+
+        /* Balance autopm calls if scanning was cancelled */
+        if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+                usb_autopm_put_interface_no_suspend(us->pusb_intf);
 
         /* Removing the host will perform an orderly shutdown: caches
          * synchronized, disks spun down, etc.
@@ -823,53 +827,28 @@ static void release_everything(struct us_data *us)
         scsi_host_put(us_to_host(us));
 }
 
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
 {
-        struct us_data *us = (struct us_data *)__us;
+        struct us_data *us = container_of(work, struct us_data,
+                        scan_dwork.work);
         struct device *dev = &us->pusb_intf->dev;
 
-        dev_dbg(dev, "device found\n");
-
-        set_freezable();
+        dev_dbg(dev, "starting scan\n");
 
-        /*
-         * Wait for the timeout to expire or for a disconnect
-         *
-         * We can't freeze in this thread or we risk causing khubd to
-         * fail to freeze, but we can't be non-freezable either. Nor can
-         * khubd freeze while waiting for scanning to complete as it may
-         * hold the device lock, causing a hang when suspending devices.
-         * So instead of using wait_event_freezable(), explicitly test
-         * for (DONT_SCAN || freezing) in interruptible wait and proceed
-         * if any of DONT_SCAN, freezing or timeout has happened.
-         */
-        if (delay_use > 0) {
-                dev_dbg(dev, "waiting for device to settle "
-                                "before scanning\n");
-                wait_event_interruptible_timeout(us->delay_wait,
-                                test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
-                                freezing(current), delay_use * HZ);
+        /* For bulk-only devices, determine the max LUN value */
+        if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+                mutex_lock(&us->dev_mutex);
+                us->max_lun = usb_stor_Bulk_max_lun(us);
+                mutex_unlock(&us->dev_mutex);
         }
+        scsi_scan_host(us_to_host(us));
+        dev_dbg(dev, "scan complete\n");
 
-        /* If the device is still connected, perform the scanning */
-        if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
-                /* For bulk-only devices, determine the max LUN value */
-                if (us->protocol == USB_PR_BULK &&
-                                !(us->fflags & US_FL_SINGLE_LUN)) {
-                        mutex_lock(&us->dev_mutex);
-                        us->max_lun = usb_stor_Bulk_max_lun(us);
-                        mutex_unlock(&us->dev_mutex);
-                }
-                scsi_scan_host(us_to_host(us));
-                dev_dbg(dev, "scan complete\n");
-
-                /* Should we unbind if no devices were detected? */
-        }
+        /* Should we unbind if no devices were detected? */
 
         usb_autopm_put_interface(us->pusb_intf);
-        complete_and_exit(&us->scanning_done, 0);
+        clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 }
 
 static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
@@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus,
         init_completion(&us->cmnd_ready);
         init_completion(&(us->notify));
         init_waitqueue_head(&us->delay_wait);
-        init_completion(&us->scanning_done);
+        INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
 
         /* Associate the us_data structure with the USB device */
         result = associate_dev(us, intf);
@@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1);
 /* Second part of general USB mass-storage probing */
 int usb_stor_probe2(struct us_data *us)
 {
-        struct task_struct *th;
         int result;
         struct device *dev = &us->pusb_intf->dev;
 
@@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us)
                 goto BadDevice;
         }
 
-        /* Start up the thread for delayed SCSI-device scanning */
-        th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
-        if (IS_ERR(th)) {
-                dev_warn(dev,
-                                "Unable to start the device-scanning thread\n");
-                complete(&us->scanning_done);
-                quiesce_and_remove_host(us);
-                result = PTR_ERR(th);
-                goto BadDevice;
-        }
-
+        /* Submit the delayed_work for SCSI-device scanning */
         usb_autopm_get_interface_no_resume(us->pusb_intf);
-        wake_up_process(th);
+        set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 
+        if (delay_use > 0)
+                dev_dbg(dev, "waiting for device to settle before scanning\n");
+        queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+                        delay_use * HZ);
         return 0;
 
         /* We come here if there are any problems */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 7b0f2113632e..75f70f04f37b 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -47,6 +47,7 @@
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 #include <scsi/scsi_host.h>
 
 struct us_data;
@@ -72,7 +73,7 @@ struct us_unusual_dev {
 #define US_FLIDX_DISCONNECTING  3       /* disconnect in progress   */
 #define US_FLIDX_RESETTING      4       /* device reset in progress */
 #define US_FLIDX_TIMED_OUT      5       /* SCSI midlayer timed out  */
-#define US_FLIDX_DONT_SCAN      6       /* don't scan (disconnect)  */
+#define US_FLIDX_SCAN_PENDING   6       /* scanning not yet done    */
 #define US_FLIDX_REDO_READ10    7       /* redo READ(10) command    */
 #define US_FLIDX_READ10_WORKED  8       /* previous READ(10) succeeded */
 
@@ -147,8 +148,8 @@ struct us_data {
         /* mutual exclusion and synchronization structures */
         struct completion       cmnd_ready;      /* to sleep thread on      */
         struct completion       notify;          /* thread begin/end        */
-        wait_queue_head_t       delay_wait;      /* wait during scan, reset */
-        struct completion       scanning_done;   /* wait for scan thread    */
+        wait_queue_head_t       delay_wait;      /* wait during reset       */
+        struct delayed_work     scan_dwork;      /* for async scanning      */
 
         /* subdriver information */
         void                    *extra;          /* Any extra data          */