Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 113 insertions, 0 deletions

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
new file mode 100644
index 000000000000..f1f1c0608c22
--- /dev/null
+++ b/drivers/usb/storage/Kconfig
@@ -0,0 +1,113 @@
+#
+# USB Storage driver configuration
+#
+
+comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
+        depends on USB
+
+config USB_STORAGE
+        tristate "USB Mass Storage support"
+        depends on USB
+        select SCSI
+        ---help---
+          Say Y here if you want to connect USB mass storage devices to your
+          computer's USB port. This is the driver you need for USB
+          floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
+          USB flash devices, and memory sticks, along with
+          similar devices. This driver may also be used for some cameras
+          and card readers.
+
+          This option 'selects' (turns on, enables) 'SCSI', but you
+          probably also need 'SCSI device support: SCSI disk support'
+          (BLK_DEV_SD) for most USB storage devices.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usb-storage.
+
+config USB_STORAGE_DEBUG
+        bool "USB Mass Storage verbose debug"
+        depends on USB_STORAGE
+        help
+          Say Y here in order to have the USB Mass Storage code generate
+          verbose debugging messages.
+
+config USB_STORAGE_DATAFAB
+        bool "Datafab Compact Flash Reader support (EXPERIMENTAL)"
+        depends on USB_STORAGE && EXPERIMENTAL
+        help
+          Support for certain Datafab CompactFlash readers.
+          Datafab has a web page at <http://www.datafabusa.com/>.
+
+config USB_STORAGE_FREECOM
+        bool "Freecom USB/ATAPI Bridge support"
+        depends on USB_STORAGE
+        help
+          Support for the Freecom USB to IDE/ATAPI adaptor.
+          Freecom has a web page at <http://www.freecom.de/>.
+
+config USB_STORAGE_ISD200
+        bool "ISD-200 USB/ATA Bridge support"
+        depends on USB_STORAGE && BLK_DEV_IDE
+        ---help---
+          Say Y here if you want to use USB Mass Store devices based
+          on the In-Systems Design ISD-200 USB/ATA bridge.
+
+          Some of the products that use this chip are:
+
+          - Archos Jukebox 6000
+          - ISD SmartCable for Storage
+          - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
+          - Sony CRX10U CD-R/RW drive
+          - CyQ've CQ8060A CDRW drive
+          - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
+
+config USB_STORAGE_DPCM
+        bool "Microtech/ZiO! CompactFlash/SmartMedia support"
+        depends on USB_STORAGE
+        help
+          Say Y here to support the Microtech/ZiO! CompactFlash reader.
+          There is a web page at <http://www.ziocorp.com/products/>.
+
+config USB_STORAGE_USBAT
+        bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)"
+        depends on USB_STORAGE && EXPERIMENTAL
+        help
+          Say Y here to include additional code to support storage devices
+          based on the SCM/Shuttle USBAT/USBAT02 processors.
+
+          Devices reported to work with this driver include:
+          - CompactFlash reader included with Kodak DC3800 camera
+          - Dane-Elec Zmate CompactFlash reader
+          - Delkin Efilm reader2
+          - HP 8200e/8210e/8230e CD-Writer Plus drives
+          - I-JAM JS-50U
+          - Jessops CompactFlash JESDCFRU BLACK
+          - Kingston Technology PCREAD-USB/CF
+          - Maxell UA4 CompactFlash reader
+          - Memorex UCF-100
+          - Microtech ZiO! ICS-45 CF2
+          - RCA LYRA MP3 portable
+          - Sandisk ImageMate SDDR-05b
+
+config USB_STORAGE_SDDR09
+        bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)"
+        depends on USB_STORAGE && EXPERIMENTAL
+        help
+          Say Y here to include additional code to support the Sandisk SDDR-09
+          SmartMedia reader in the USB Mass Storage driver.
+          Also works for the Microtech Zio! SmartMedia reader.
+
+config USB_STORAGE_SDDR55
+        bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)"
+        depends on USB_STORAGE && EXPERIMENTAL
+        help
+          Say Y here to include additional code to support the Sandisk SDDR-55
+          SmartMedia reader in the USB Mass Storage driver.
+
+config USB_STORAGE_JUMPSHOT
+        bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)"
+        depends on USB_STORAGE && EXPERIMENTAL
+        help
+          Say Y here to include additional code to support the Lexar Jumpshot
+          USB CompactFlash reader.
+