USB: add usb-serial spcp8x5 driver

Original version of the driver done by Linxb, changes by Harald, and
lots of cleanups by me in order to get it into a mergable state.

Cc: Linxb <xubin.lin@worldplus.com.cn>
Cc: Harald Klein <hari@vt100.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 1087 insertions, 1 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a769f6a5d7fb..f9c6c0922c00 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -503,6 +503,16 @@ config USB_SERIAL_OTI6858
           To compile this driver as a module, choose M here: the
           module will be called oti6858.
 
+config USB_SERIAL_SPCP8X5
+        tristate "USB SPCP8x5 USB To Serial Driver"
+        depends on USB_SERIAL
+        help
+          Say Y here if you want to use the spcp8x5 converter chip.  This is
+          commonly found in some Z-Wave USB devices.
+
+          To compile this driver as a module, choose M here: the
+          module will be called spcp8x5.
+
 config USB_SERIAL_HP4X
         tristate "USB HP4x Calculators support"
         depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 0db109a54d10..756859510d8c 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -30,8 +30,8 @@ obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
 obj-$(CONFIG_USB_SERIAL_HP4X)                   += hp4x.o
 obj-$(CONFIG_USB_SERIAL_IPAQ)                   += ipaq.o
 obj-$(CONFIG_USB_SERIAL_IPW)                    += ipw.o
-obj-$(CONFIG_USB_SERIAL_IUU)                    += iuu_phoenix.o
 obj-$(CONFIG_USB_SERIAL_IR)                     += ir-usb.o
+obj-$(CONFIG_USB_SERIAL_IUU)                    += iuu_phoenix.o
 obj-$(CONFIG_USB_SERIAL_KEYSPAN)                += keyspan.o
 obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA)            += keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_KLSI)                   += kl5kusb105.o
@@ -46,6 +46,7 @@ obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)                 += pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)                   += safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)         += sierra.o
+obj-$(CONFIG_USB_SERIAL_SPCP8X5)                += spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_TI)                     += ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)                  += visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)              += whiteheat.o
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
new file mode 100644
index 000000000000..1b46b846f100
--- /dev/null
+++ b/drivers/usb/serial/spcp8x5.c
@@ -0,0 +1,1075 @@
+/*
+ * spcp8x5 USB to serial adaptor driver
+ *
+ * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
+ * Copyright (C) 2006 S1 Corp.
+ *
+ * Original driver for 2.6.10 pl2303 driver by
+ *   Greg Kroah-Hartman (greg@kroah.com)
+ * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+
+/* Version Information */
+#define DRIVER_VERSION  "v0.04"
+#define DRIVER_DESC     "SPCP8x5 USB to serial adaptor driver"
+
+static int debug;
+
+#define SPCP8x5_007_VID         0x04FC
+#define SPCP8x5_007_PID         0x0201
+#define SPCP8x5_008_VID         0x04fc
+#define SPCP8x5_008_PID         0x0235
+#define SPCP8x5_PHILIPS_VID     0x0471
+#define SPCP8x5_PHILIPS_PID     0x081e
+#define SPCP8x5_INTERMATIC_VID  0x04FC
+#define SPCP8x5_INTERMATIC_PID  0x0204
+#define SPCP8x5_835_VID         0x04fc
+#define SPCP8x5_835_PID         0x0231
+
+static struct usb_device_id id_table [] = {
+        { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
+        { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
+        { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
+        { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
+        { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
+        { }                                     /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct spcp8x5_usb_ctrl_arg {
+        u8      type;
+        u8      cmd;
+        u8      cmd_type;
+        u16     value;
+        u16     index;
+        u16     length;
+};
+
+/* wait 30s before close */
+#define SPCP8x5_CLOSING_WAIT    (30*HZ)
+
+#define SPCP8x5_BUF_SIZE        1024
+
+
+/* spcp8x5 spec register define */
+#define MCR_CONTROL_LINE_RTS            0x02
+#define MCR_CONTROL_LINE_DTR            0x01
+#define MCR_DTR                         0x01
+#define MCR_RTS                         0x02
+
+#define MSR_STATUS_LINE_DCD             0x80
+#define MSR_STATUS_LINE_RI              0x40
+#define MSR_STATUS_LINE_DSR             0x20
+#define MSR_STATUS_LINE_CTS             0x10
+
+/* verdor command here , we should define myself */
+#define SET_DEFAULT                     0x40
+#define SET_DEFAULT_TYPE                0x20
+
+#define SET_UART_FORMAT                 0x40
+#define SET_UART_FORMAT_TYPE            0x21
+#define SET_UART_FORMAT_SIZE_5          0x00
+#define SET_UART_FORMAT_SIZE_6          0x01
+#define SET_UART_FORMAT_SIZE_7          0x02
+#define SET_UART_FORMAT_SIZE_8          0x03
+#define SET_UART_FORMAT_STOP_1          0x00
+#define SET_UART_FORMAT_STOP_2          0x04
+#define SET_UART_FORMAT_PAR_NONE        0x00
+#define SET_UART_FORMAT_PAR_ODD         0x10
+#define SET_UART_FORMAT_PAR_EVEN        0x30
+#define SET_UART_FORMAT_PAR_MASK        0xD0
+#define SET_UART_FORMAT_PAR_SPACE       0x90
+
+#define GET_UART_STATUS_TYPE            0xc0
+#define GET_UART_STATUS                 0x22
+#define GET_UART_STATUS_MSR             0x06
+
+#define SET_UART_STATUS                 0x40
+#define SET_UART_STATUS_TYPE            0x23
+#define SET_UART_STATUS_MCR             0x0004
+#define SET_UART_STATUS_MCR_DTR         0x01
+#define SET_UART_STATUS_MCR_RTS         0x02
+#define SET_UART_STATUS_MCR_LOOP        0x10
+
+#define SET_WORKING_MODE                0x40
+#define SET_WORKING_MODE_TYPE           0x24
+#define SET_WORKING_MODE_U2C            0x00
+#define SET_WORKING_MODE_RS485          0x01
+#define SET_WORKING_MODE_PDMA           0x02
+#define SET_WORKING_MODE_SPP            0x03
+
+#define SET_FLOWCTL_CHAR                0x40
+#define SET_FLOWCTL_CHAR_TYPE           0x25
+
+#define GET_VERSION                     0xc0
+#define GET_VERSION_TYPE                0x26
+
+#define SET_REGISTER                    0x40
+#define SET_REGISTER_TYPE               0x27
+
+#define GET_REGISTER                    0xc0
+#define GET_REGISTER_TYPE               0x28
+
+#define SET_RAM                         0x40
+#define SET_RAM_TYPE                    0x31
+
+#define GET_RAM                         0xc0
+#define GET_RAM_TYPE                    0x32
+
+/* how come ??? */
+#define UART_STATE                      0x08
+#define UART_STATE_TRANSIENT_MASK       0x74
+#define UART_DCD                        0x01
+#define UART_DSR                        0x02
+#define UART_BREAK_ERROR                0x04
+#define UART_RING                       0x08
+#define UART_FRAME_ERROR                0x10
+#define UART_PARITY_ERROR               0x20
+#define UART_OVERRUN_ERROR              0x40
+#define UART_CTS                        0x80
+
+enum spcp8x5_type {
+        SPCP825_007_TYPE,
+        SPCP825_008_TYPE,
+        SPCP825_PHILIP_TYPE,
+        SPCP825_INTERMATIC_TYPE,
+        SPCP835_TYPE,
+};
+
+/* 1st in 1st out buffer 4 driver */
+struct ringbuf {
+        unsigned int    buf_size;
+        char            *buf_buf;
+        char            *buf_get;
+        char            *buf_put;
+};
+
+/* alloc the ring buf and alloc the buffer itself */
+static inline struct ringbuf *alloc_ringbuf(unsigned int size)
+{
+        struct ringbuf *pb;
+
+        if (size == 0)
+                return NULL;
+
+        pb = kmalloc(sizeof(*pb), GFP_KERNEL);
+        if (pb == NULL)
+                return NULL;
+
+        pb->buf_buf = kmalloc(size, GFP_KERNEL);
+        if (pb->buf_buf == NULL) {
+                kfree(pb);
+                return NULL;
+        }
+
+        pb->buf_size = size;
+        pb->buf_get = pb->buf_put = pb->buf_buf;
+
+        return pb;
+}
+
+/* free the ring buf and the buffer itself */
+static inline void free_ringbuf(struct ringbuf *pb)
+{
+        if (pb != NULL) {
+                kfree(pb->buf_buf);
+                kfree(pb);
+        }
+}
+
+/* clear pipo , juest repoint the pointer here */
+static inline void clear_ringbuf(struct ringbuf *pb)
+{
+        if (pb != NULL)
+                pb->buf_get = pb->buf_put;
+}
+
+/* get the number of data in the pipo */
+static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
+{
+        if (pb == NULL)
+                return 0;
+        return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+}
+
+/* get the number of space in the pipo */
+static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
+{
+        if (pb == NULL)
+                return 0;
+        return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+}
+
+/* put count data into pipo */
+static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
+                                unsigned int count)
+{
+        unsigned int len;
+
+        if (pb == NULL)
+                return 0;
+
+        len  = ringbuf_avail_space(pb);
+        if (count > len)
+                count = len;
+
+        if (count == 0)
+                return 0;
+
+        len = pb->buf_buf + pb->buf_size - pb->buf_put;
+        if (count > len) {
+                memcpy(pb->buf_put, buf, len);
+                memcpy(pb->buf_buf, buf+len, count - len);
+                pb->buf_put = pb->buf_buf + count - len;
+        } else {
+                memcpy(pb->buf_put, buf, count);
+                if (count < len)
+                        pb->buf_put += count;
+                else /* count == len */
+                        pb->buf_put = pb->buf_buf;
+        }
+        return count;
+}
+
+/* get count data from pipo */
+static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
+                                unsigned int count)
+{
+        unsigned int len;
+
+        if (pb == NULL || buf == NULL)
+                return 0;
+
+        len = ringbuf_avail_data(pb);
+        if (count > len)
+                count = len;
+
+        if (count == 0)
+                return 0;
+
+        len = pb->buf_buf + pb->buf_size - pb->buf_get;
+        if (count > len) {
+                memcpy(buf, pb->buf_get, len);
+                memcpy(buf+len, pb->buf_buf, count - len);
+                pb->buf_get = pb->buf_buf + count - len;
+        } else {
+                memcpy(buf, pb->buf_get, count);
+                if (count < len)
+                        pb->buf_get += count;
+                else /* count == len */
+                        pb->buf_get = pb->buf_buf;
+        }
+
+        return count;
+}
+
+static struct usb_driver spcp8x5_driver = {
+        .name =                 "spcp8x5",
+        .probe =                usb_serial_probe,
+        .disconnect =           usb_serial_disconnect,
+        .id_table =             id_table,
+        .no_dynamic_id =        1,
+};
+
+
+struct spcp8x5_private {
+        spinlock_t      lock;
+        struct ringbuf  *buf;
+        int             write_urb_in_use;
+        enum spcp8x5_type       type;
+        wait_queue_head_t       delta_msr_wait;
+        u8                      line_control;
+        u8                      line_status;
+        u8                      termios_initialized;
+};
+
+/* desc : when device plug in,this function would be called.
+ * thanks to usb_serial subsystem,then do almost every things for us. And what
+ * we should do just alloc the buffer */
+static int spcp8x5_startup(struct usb_serial *serial)
+{
+        struct spcp8x5_private *priv;
+        int i;
+        enum spcp8x5_type type = SPCP825_007_TYPE;
+
+        if (serial->dev->descriptor.idProduct == 0x0201)
+                type = SPCP825_007_TYPE;
+        else if (serial->dev->descriptor.idProduct == 0x0231)
+                type = SPCP835_TYPE;
+        else if (serial->dev->descriptor.idProduct == 0x0235)
+                type = SPCP825_008_TYPE;
+        else if (serial->dev->descriptor.idProduct == 0x0204)
+                type = SPCP825_INTERMATIC_TYPE;
+        else if (serial->dev->descriptor.idProduct == 0x0471 &&
+                 serial->dev->descriptor.idVendor == 0x081e)
+                type = SPCP825_PHILIP_TYPE;
+        dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
+
+        for (i = 0; i < serial->num_ports; ++i) {
+                priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
+                if (!priv)
+                        goto cleanup;
+
+                spin_lock_init(&priv->lock);
+                priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
+                if (priv->buf == NULL)
+                        goto cleanup2;
+
+                init_waitqueue_head(&priv->delta_msr_wait);
+                priv->type = type;
+                usb_set_serial_port_data(serial->port[i] , priv);
+
+        }
+
+        return 0;
+
+cleanup2:
+        kfree(priv);
+cleanup:
+        for (--i; i >= 0; --i) {
+                priv = usb_get_serial_port_data(serial->port[i]);
+                free_ringbuf(priv->buf);
+                kfree(priv);
+                usb_set_serial_port_data(serial->port[i] , NULL);
+        }
+        return -ENOMEM;
+}
+
+/* call when the device plug out. free all the memory alloced by probe */
+static void spcp8x5_shutdown(struct usb_serial *serial)
+{
+        int i;
+        struct spcp8x5_private *priv;
+
+        for (i = 0; i < serial->num_ports; i++) {
+                priv = usb_get_serial_port_data(serial->port[i]);
+                if (priv) {
+                        free_ringbuf(priv->buf);
+                        kfree(priv);
+                        usb_set_serial_port_data(serial->port[i] , NULL);
+                }
+        }
+}
+
+/* set the modem control line of the device.
+ * NOTE spcp825-007 not supported this */
+static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
+                                enum spcp8x5_type type)
+{
+        int retval;
+        u8 mcr = 0 ;
+
+        if (type == SPCP825_007_TYPE)
+                return -EPERM;
+
+        mcr = (unsigned short)value;
+        retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+                                 SET_UART_STATUS_TYPE, SET_UART_STATUS,
+                                 mcr, 0x04, NULL, 0, 100);
+        if (retval != 0)
+                dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
+        return retval;
+}
+
+/* get the modem status register of the device
+ * NOTE spcp825-007 not supported this */
+static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
+                           enum spcp8x5_type type)
+{
+        u8 *status_buffer;
+        int ret;
+
+        /* I return Permited not support here but seem inval device
+         * is more fix */
+        if (type == SPCP825_007_TYPE)
+                return -EPERM;
+        if (status == NULL)
+                return -EINVAL;
+
+        status_buffer = kmalloc(1, GFP_KERNEL);
+        if (!status_buffer)
+                return -ENOMEM;
+        status_buffer[0] = status[0];
+
+        ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+                              GET_UART_STATUS, GET_UART_STATUS_TYPE,
+                              0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
+        if (ret < 0)
+                dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
+                        status_buffer, ret);
+
+        dev_dbg(&dev->dev, "0xc0:0x22:0:6  %d - 0x%p ", ret, status_buffer);
+        status[0] = status_buffer[0];
+        kfree(status_buffer);
+
+        return ret;
+}
+
+/* select the work mode.
+ * NOTE this function not supported by spcp825-007 */
+static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
+                                 u16 index, enum spcp8x5_type type)
+{
+        int ret;
+
+        /* I return Permited not support here but seem inval device
+         * is more fix */
+        if (type == SPCP825_007_TYPE)
+                return;
+
+        ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+                              SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
+                              value, index, NULL, 0, 100);
+        dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
+        if (ret < 0)
+                dev_dbg(&dev->dev,
+                        "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
+}
+
+/* close the serial port. We should wait for data sending to device 1st and
+ * then kill all urb. */
+static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int c_cflag;
+        int bps;
+        long timeout;
+        wait_queue_t wait;
+        int result;
+
+        dbg("%s - port %d", __func__, port->number);
+
+        /* wait for data to drain from the buffer */
+        spin_lock_irqsave(&priv->lock, flags);
+        timeout = SPCP8x5_CLOSING_WAIT;
+        init_waitqueue_entry(&wait, current);
+        add_wait_queue(&port->tty->write_wait, &wait);
+        for (;;) {
+                set_current_state(TASK_INTERRUPTIBLE);
+                if (ringbuf_avail_data(priv->buf) == 0 ||
+                    timeout == 0 || signal_pending(current))
+                        break;
+                spin_unlock_irqrestore(&priv->lock, flags);
+                timeout = schedule_timeout(timeout);
+                spin_lock_irqsave(&priv->lock, flags);
+        }
+        set_current_state(TASK_RUNNING);
+        remove_wait_queue(&port->tty->write_wait, &wait);
+
+        /* clear out any remaining data in the buffer */
+        clear_ringbuf(priv->buf);
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        /* wait for characters to drain from the device (this is long enough
+         * for the entire all byte spcp8x5 hardware buffer to drain with no
+         * flow control for data rates of 1200 bps or more, for lower rates we
+         * should really know how much data is in the buffer to compute a delay
+         * that is not unnecessarily long) */
+        bps = tty_get_baud_rate(port->tty);
+        if (bps > 1200)
+                timeout = max((HZ*2560) / bps, HZ/10);
+        else
+                timeout = 2*HZ;
+        set_current_state(TASK_INTERRUPTIBLE);
+        schedule_timeout(timeout);
+
+        /* clear control lines */
+        if (port->tty) {
+                c_cflag = port->tty->termios->c_cflag;
+                if (c_cflag & HUPCL) {
+                        spin_lock_irqsave(&priv->lock, flags);
+                        priv->line_control = 0;
+                        spin_unlock_irqrestore(&priv->lock, flags);
+                        spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
+                }
+        }
+
+        /* kill urb */
+        if (port->write_urb != NULL) {
+                result = usb_unlink_urb(port->write_urb);
+                if (result)
+                        dev_dbg(&port->dev,
+                                "usb_unlink_urb(write_urb) = %d\n", result);
+        }
+        result = usb_unlink_urb(port->read_urb);
+        if (result)
+                dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
+}
+
+/* set the serial param for transfer. we should check if we really need to
+ * transfer. then if be set flow contorl we should do this too. */
+static void spcp8x5_set_termios(struct usb_serial_port *port,
+                                struct ktermios *old_termios)
+{
+        struct usb_serial *serial = port->serial;
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int cflag = port->tty->termios->c_cflag;
+        unsigned int old_cflag = old_termios->c_cflag;
+        unsigned short uartdata;
+        unsigned char buf[2] = {0, 0};
+        int baud;
+        int i;
+        u8 control;
+
+        if ((!port->tty) || (!port->tty->termios))
+                return;
+
+        /* for the 1st time call this function */
+        spin_lock_irqsave(&priv->lock, flags);
+        if (!priv->termios_initialized) {
+                *(port->tty->termios) = tty_std_termios;
+                port->tty->termios->c_cflag = B115200 | CS8 | CREAD |
+                                              HUPCL | CLOCAL;
+                priv->termios_initialized = 1;
+        }
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        /* check that they really want us to change something */
+        if (!tty_termios_hw_change(port->tty->termios, old_termios))
+                return;
+
+        /* set DTR/RTS active */
+        spin_lock_irqsave(&priv->lock, flags);
+        control = priv->line_control;
+        if ((old_cflag & CBAUD) == B0) {
+                priv->line_control |= MCR_DTR;
+                if (!(old_cflag & CRTSCTS))
+                        priv->line_control |= MCR_RTS;
+        }
+        if (control != priv->line_control) {
+                control = priv->line_control;
+                spin_unlock_irqrestore(&priv->lock, flags);
+                spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
+        } else {
+                spin_unlock_irqrestore(&priv->lock, flags);
+        }
+
+        /* Set Baud Rate */
+        baud = tty_get_baud_rate(port->tty);;
+        switch (baud) {
+        case 300:       buf[0] = 0x00;  break;
+        case 600:       buf[0] = 0x01;  break;
+        case 1200:      buf[0] = 0x02;  break;
+        case 2400:      buf[0] = 0x03;  break;
+        case 4800:      buf[0] = 0x04;  break;
+        case 9600:      buf[0] = 0x05;  break;
+        case 19200:     buf[0] = 0x07;  break;
+        case 38400:     buf[0] = 0x09;  break;
+        case 57600:     buf[0] = 0x0a;  break;
+        case 115200:    buf[0] = 0x0b;  break;
+        case 230400:    buf[0] = 0x0c;  break;
+        case 460800:    buf[0] = 0x0d;  break;
+        case 921600:    buf[0] = 0x0e;  break;
+/*      case 1200000:   buf[0] = 0x0f;  break; */
+/*      case 2400000:   buf[0] = 0x10;  break; */
+        case 3000000:   buf[0] = 0x11;  break;
+/*      case 6000000:   buf[0] = 0x12;  break; */
+        case 0:
+        case 1000000:
+                        buf[0] = 0x0b;  break;
+        default:
+                err("spcp825 driver does not support the baudrate "
+                    "requested, using default of 9600.");
+        }
+
+        /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
+        if (cflag & CSIZE) {
+                switch (cflag & CSIZE) {
+                case CS5:
+                        buf[1] |= SET_UART_FORMAT_SIZE_5;
+                        break;
+                case CS6:
+                        buf[1] |= SET_UART_FORMAT_SIZE_6;
+                        break;
+                case CS7:
+                        buf[1] |= SET_UART_FORMAT_SIZE_7;
+                        break;
+                default:
+                case CS8:
+                        buf[1] |= SET_UART_FORMAT_SIZE_8;
+                        break;
+                }
+        }
+
+        /* Set Stop bit2 : 0:1bit 1:2bit */
+        buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
+                                     SET_UART_FORMAT_STOP_1;
+
+        /* Set Parity bit3-4 01:Odd 11:Even */
+        if (cflag & PARENB) {
+                buf[1] |= (cflag & PARODD) ?
+                SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
+        } else
+                buf[1] |= SET_UART_FORMAT_PAR_NONE;
+
+        uartdata = buf[0] | buf[1]<<8;
+
+        i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+                            SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
+                            uartdata, 0, NULL, 0, 100);
+        if (i < 0)
+                err("Set UART format %#x failed (error = %d)", uartdata, i);
+        dbg("0x21:0x40:0:0  %d\n", i);
+
+        if (cflag & CRTSCTS) {
+                /* enable hardware flow control */
+                spcp8x5_set_workMode(serial->dev, 0x000a,
+                                     SET_WORKING_MODE_U2C, priv->type);
+        }
+        return;
+}
+
+/* open the serial port. do some usb system call. set termios and get the line
+ * status of the device. then submit the read urb */
+static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
+{
+        struct ktermios tmp_termios;
+        struct usb_serial *serial = port->serial;
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        int ret;
+        unsigned long flags;
+        u8 status = 0x30;
+        /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
+
+        dbg("%s -  port %d", __func__, port->number);
+
+        usb_clear_halt(serial->dev, port->write_urb->pipe);
+        usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+        ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+                              0x09, 0x00,
+                              0x01, 0x00, NULL, 0x00, 100);
+        if (ret)
+                return ret;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (port->tty->termios->c_cflag & CBAUD)
+                priv->line_control = MCR_DTR | MCR_RTS;
+        else
+                priv->line_control = 0;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
+
+        /* Setup termios */
+        if (port->tty)
+                spcp8x5_set_termios(port, &tmp_termios);
+
+        spcp8x5_get_msr(serial->dev, &status, priv->type);
+
+        /* may be we should update uart status here but now we did not do */
+        spin_lock_irqsave(&priv->lock, flags);
+        priv->line_status = status & 0xf0 ;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        /* FIXME: need to assert RTS and DTR if CRTSCTS off */
+
+        dbg("%s - submitting read urb", __func__);
+        port->read_urb->dev = serial->dev;
+        ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
+        if (ret) {
+                spcp8x5_close(port, NULL);
+                return -EPROTO;
+        }
+        return 0;
+}
+
+/* bulk read call back function. check the status of the urb. if transfer
+ * failed return. then update the status and the tty send data to tty subsys.
+ * submit urb again.
+ */
+static void spcp8x5_read_bulk_callback(struct urb *urb)
+{
+        struct usb_serial_port *port = urb->context;
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        struct tty_struct *tty;
+        unsigned char *data = urb->transfer_buffer;
+        unsigned long flags;
+        int i;
+        int result;
+        u8 status = 0;
+        char tty_flag;
+
+        dev_dbg(&port->dev, "start, urb->status = %d, "
+                "urb->actual_length = %d\n,", urb->status, urb->actual_length);
+
+        /* check the urb status */
+        if (urb->status) {
+                if (!port->open_count)
+                        return;
+                if (urb->status == -EPROTO) {
+                        /* spcp8x5 mysteriously fails with -EPROTO */
+                        /* reschedule the read */
+                        urb->status = 0;
+                        urb->dev = port->serial->dev;
+                        result = usb_submit_urb(urb , GFP_ATOMIC);
+                        if (result)
+                                dev_dbg(&port->dev,
+                                        "failed submitting read urb %d\n",
+                                        result);
+                        return;
+                }
+                dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
+                return;
+        }
+
+        /* get tty_flag from status */
+        tty_flag = TTY_NORMAL;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        status = priv->line_status;
+        priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        /* wake up the wait for termios */
+        wake_up_interruptible(&priv->delta_msr_wait);
+
+        /* break takes precedence over parity, which takes precedence over
+         * framing errors */
+        if (status & UART_BREAK_ERROR)
+                tty_flag = TTY_BREAK;
+        else if (status & UART_PARITY_ERROR)
+                tty_flag = TTY_PARITY;
+        else if (status & UART_FRAME_ERROR)
+                tty_flag = TTY_FRAME;
+        dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
+
+        tty = port->tty;
+        if (tty && urb->actual_length) {
+                tty_buffer_request_room(tty, urb->actual_length + 1);
+                /* overrun is special, not associated with a char */
+                if (status & UART_OVERRUN_ERROR)
+                        tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+                for (i = 0; i < urb->actual_length; ++i)
+                        tty_insert_flip_char(tty, data[i], tty_flag);
+                tty_flip_buffer_push(tty);
+        }
+
+        /* Schedule the next read _if_ we are still open */
+        if (port->open_count) {
+                urb->dev = port->serial->dev;
+                result = usb_submit_urb(urb , GFP_ATOMIC);
+                if (result)
+                        dev_dbg(&port->dev, "failed submitting read urb %d\n",
+                                result);
+        }
+
+        return;
+}
+
+/* get data from ring buffer and then write to usb bus */
+static void spcp8x5_send(struct usb_serial_port *port)
+{
+        int count, result;
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+
+        if (priv->write_urb_in_use) {
+                dev_dbg(&port->dev, "write urb still used\n");
+                spin_unlock_irqrestore(&priv->lock, flags);
+                return;
+        }
+
+        /* send the 1st urb for writting */
+        memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
+        count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
+                port->bulk_out_size);
+
+        if (count == 0) {
+                spin_unlock_irqrestore(&priv->lock, flags);
+                return;
+        }
+
+        /* update the urb status */
+        priv->write_urb_in_use = 1;
+
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        port->write_urb->transfer_buffer_length = count;
+        port->write_urb->dev = port->serial->dev;
+
+        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+        if (result) {
+                dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
+                        result);
+                priv->write_urb_in_use = 0;
+                /* TODO: reschedule spcp8x5_send */
+        }
+
+
+        schedule_work(&port->work);
+}
+
+/* this is the call back function for write urb. NOTE we should not sleep in
+ * this routine. check the urb return code and then submit the write urb again
+ * to hold the write loop */
+static void spcp8x5_write_bulk_callback(struct urb *urb)
+{
+        struct usb_serial_port *port = urb->context;
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        int result;
+
+        switch (urb->status) {
+        case 0:
+                /* success */
+                break;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dev_dbg(&port->dev, "urb shutting down with status: %d\n",
+                        urb->status);
+                priv->write_urb_in_use = 0;
+                return;
+        default:
+                /* error in the urb, so we have to resubmit it */
+                dbg("%s - Overflow in write", __func__);
+                dbg("%s - nonzero write bulk status received: %d",
+                        __func__, urb->status);
+                port->write_urb->transfer_buffer_length = 1;
+                port->write_urb->dev = port->serial->dev;
+                result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+                if (result)
+                        dev_dbg(&port->dev,
+                                "failed resubmitting write urb %d\n", result);
+                else
+                        return;
+        }
+
+        priv->write_urb_in_use = 0;
+
+        /* send any buffered data */
+        spcp8x5_send(port);
+}
+
+/* write data to ring buffer. and then start the write transfer */
+static int spcp8x5_write(struct usb_serial_port *port,
+                         const unsigned char *buf, int count)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+
+        dev_dbg(&port->dev, "%d bytes\n", count);
+
+        if (!count)
+                return count;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        count = put_ringbuf(priv->buf, buf, count);
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        spcp8x5_send(port);
+
+        return count;
+}
+
+static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
+                                   unsigned int arg)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int prevstatus;
+        unsigned int status;
+        unsigned int changed;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        prevstatus = priv->line_status;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        while (1) {
+                /* wake up in bulk read */
+                interruptible_sleep_on(&priv->delta_msr_wait);
+
+                /* see if a signal did it */
+                if (signal_pending(current))
+                        return -ERESTARTSYS;
+
+                spin_lock_irqsave(&priv->lock, flags);
+                status = priv->line_status;
+                spin_unlock_irqrestore(&priv->lock, flags);
+
+                changed = prevstatus^status;
+
+                if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
+                    ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
+                    ((arg & TIOCM_CD)  && (changed & MSR_STATUS_LINE_DCD)) ||
+                    ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
+                        return 0;
+
+                prevstatus = status;
+        }
+        /* NOTREACHED */
+        return 0;
+}
+
+static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
+                         unsigned int cmd, unsigned long arg)
+{
+        dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+        switch (cmd) {
+        case TIOCMIWAIT:
+                dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+                return spcp8x5_wait_modem_info(port, arg);
+
+        default:
+                dbg("%s not supported = 0x%04x", __func__, cmd);
+                break;
+        }
+
+        return -ENOIOCTLCMD;
+}
+
+static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
+                            unsigned int set, unsigned int clear)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 control;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (set & TIOCM_RTS)
+                priv->line_control |= MCR_RTS;
+        if (set & TIOCM_DTR)
+                priv->line_control |= MCR_DTR;
+        if (clear & TIOCM_RTS)
+                priv->line_control &= ~MCR_RTS;
+        if (clear & TIOCM_DTR)
+                priv->line_control &= ~MCR_DTR;
+        control = priv->line_control;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
+static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        unsigned int mcr;
+        unsigned int status;
+        unsigned int result;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        mcr = priv->line_control;
+        status = priv->line_status;
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        result = ((mcr & MCR_DTR)                       ? TIOCM_DTR : 0)
+                  | ((mcr & MCR_RTS)                    ? TIOCM_RTS : 0)
+                  | ((status & MSR_STATUS_LINE_CTS)     ? TIOCM_CTS : 0)
+                  | ((status & MSR_STATUS_LINE_DSR)     ? TIOCM_DSR : 0)
+                  | ((status & MSR_STATUS_LINE_RI)      ? TIOCM_RI  : 0)
+                  | ((status & MSR_STATUS_LINE_DCD)     ? TIOCM_CD  : 0);
+
+        return result;
+}
+
+/* get the avail space room in ring buffer */
+static int spcp8x5_write_room(struct usb_serial_port *port)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        int room = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        room = ringbuf_avail_space(priv->buf);
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return room;
+}
+
+/* get the number of avail data in write ring buffer */
+static int spcp8x5_chars_in_buffer(struct usb_serial_port *port)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        int chars = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        chars = ringbuf_avail_data(priv->buf);
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return chars;
+}
+
+/* All of the device info needed for the spcp8x5 SIO serial converter */
+static struct usb_serial_driver spcp8x5_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "SPCP8x5",
+        },
+        .id_table               = id_table,
+        .num_interrupt_in       = NUM_DONT_CARE,
+        .num_bulk_in            = 1,
+        .num_bulk_out           = 1,
+        .num_ports              = 1,
+        .open                   = spcp8x5_open,
+        .close                  = spcp8x5_close,
+        .write                  = spcp8x5_write,
+        .set_termios            = spcp8x5_set_termios,
+        .ioctl                  = spcp8x5_ioctl,
+        .tiocmget               = spcp8x5_tiocmget,
+        .tiocmset               = spcp8x5_tiocmset,
+        .write_room             = spcp8x5_write_room,
+        .read_bulk_callback     = spcp8x5_read_bulk_callback,
+        .write_bulk_callback    = spcp8x5_write_bulk_callback,
+        .chars_in_buffer        = spcp8x5_chars_in_buffer,
+        .attach                 = spcp8x5_startup,
+        .shutdown               = spcp8x5_shutdown,
+};
+
+static int __init spcp8x5_init(void)
+{
+        int retval;
+        retval = usb_serial_register(&spcp8x5_device);
+        if (retval)
+                goto failed_usb_serial_register;
+        retval = usb_register(&spcp8x5_driver);
+        if (retval)
+                goto failed_usb_register;
+        info(DRIVER_DESC " " DRIVER_VERSION);
+        return 0;
+failed_usb_register:
+        usb_serial_deregister(&spcp8x5_device);
+failed_usb_serial_register:
+        return retval;
+}
+
+static void __exit spcp8x5_exit(void)
+{
+        usb_deregister(&spcp8x5_driver);
+        usb_serial_deregister(&spcp8x5_device);
+}
+
+module_init(spcp8x5_init);
+module_exit(spcp8x5_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");