Merge commit 'origin/master' into next

Manual merge of:
	arch/powerpc/kernel/asm-offsets.c

1 files changed, 31 insertions, 54 deletions

diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528cc81a8..8f7ed8f13996 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
                         "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 }
 
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        if (priv->line_status & MSR_STATUS_LINE_DCD)
+                return 1;
+        return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+        struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 control;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (on)
+                priv->line_control = MCR_CONTROL_LINE_DTR
+                                                | MCR_CONTROL_LINE_RTS;
+        else
+                priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+                                                | MCR_CONTROL_LINE_RTS);
+        control = priv->line_control;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
-                        struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
 {
         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
-        unsigned int c_cflag;
-        int bps;
-        long timeout;
-        wait_queue_t wait;
         int result;
 
         dbg("%s - port %d", __func__, port->number);
 
-        /* wait for data to drain from the buffer */
         spin_lock_irqsave(&priv->lock, flags);
-        timeout = SPCP8x5_CLOSING_WAIT;
-        init_waitqueue_entry(&wait, current);
-        add_wait_queue(&tty->write_wait, &wait);
-        for (;;) {
-                set_current_state(TASK_INTERRUPTIBLE);
-                if (ringbuf_avail_data(priv->buf) == 0 ||
-                    timeout == 0 || signal_pending(current))
-                        break;
-                spin_unlock_irqrestore(&priv->lock, flags);
-                timeout = schedule_timeout(timeout);
-                spin_lock_irqsave(&priv->lock, flags);
-        }
-        set_current_state(TASK_RUNNING);
-        remove_wait_queue(&tty->write_wait, &wait);
-
         /* clear out any remaining data in the buffer */
         clear_ringbuf(priv->buf);
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        /* wait for characters to drain from the device (this is long enough
-         * for the entire all byte spcp8x5 hardware buffer to drain with no
-         * flow control for data rates of 1200 bps or more, for lower rates we
-         * should really know how much data is in the buffer to compute a delay
-         * that is not unnecessarily long) */
-        bps = tty_get_baud_rate(tty);
-        if (bps > 1200)
-                timeout = max((HZ*2560) / bps, HZ/10);
-        else
-                timeout = 2*HZ;
-        set_current_state(TASK_INTERRUPTIBLE);
-        schedule_timeout(timeout);
-
-        /* clear control lines */
-        if (tty) {
-                c_cflag = tty->termios->c_cflag;
-                if (c_cflag & HUPCL) {
-                        spin_lock_irqsave(&priv->lock, flags);
-                        priv->line_control = 0;
-                        spin_unlock_irqrestore(&priv->lock, flags);
-                        spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
-                }
-        }
-
         /* kill urb */
         if (port->write_urb != NULL) {
                 result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
         if (ret)
                 return ret;
 
-        spin_lock_irqsave(&priv->lock, flags);
-        if (tty && (tty->termios->c_cflag & CBAUD))
-                priv->line_control = MCR_DTR | MCR_RTS;
-        else
-                priv->line_control = 0;
-        spin_unlock_irqrestore(&priv->lock, flags);
-
         spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
         /* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
         port->read_urb->dev = serial->dev;
         ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
         if (ret) {
-                spcp8x5_close(tty, port, NULL);
+                spcp8x5_close(port);
                 return -EPROTO;
         }
+        port->port.drain_delay = 256;
         return 0;
 }
 
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
         .num_ports              = 1,
         .open                   = spcp8x5_open,
         .close                  = spcp8x5_close,
+        .dtr_rts                = spcp8x5_dtr_rts,
+        .carrier_raised         = spcp8x5_carrier_raised,
         .write                  = spcp8x5_write,
         .set_termios            = spcp8x5_set_termios,
         .ioctl                  = spcp8x5_ioctl,