usb_serial: API all change

USB serial likes to use port->tty back pointers for the real work it does and
to do so without any actual locking. Unfortunately when you consider hangup
events, hangup/parallel reopen or even worse hangup followed by parallel close
events the tty->port and port->tty pointers are not guaranteed to be the same
as port->tty is the active tty while tty->port is the port the tty may or
may not still be attached to.

So rework the entire API to pass the tty struct. For console cases we need
to pass both for now. This shows up multiple drivers that immediately crash
with USB console some of which have been fixed in the process.

Longer term we need a proper tty as console abstraction

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 66 insertions, 99 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 78f2f6db494d..2b1fded6619d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -710,7 +710,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
         dbg("%s", "Entering ........... \n");
 
         if (urb->actual_length) {
-                tty = mos7840_port->port->tty;
+                tty = mos7840_port->port->port.tty;
                 if (tty) {
                         tty_buffer_request_room(tty, urb->actual_length);
                         tty_insert_flip_string(tty, data, urb->actual_length);
@@ -774,7 +774,7 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 
         dbg("%s \n", "Entering .........");
 
-        tty = mos7840_port->port->tty;
+        tty = mos7840_port->port->port.tty;
 
         if (tty && mos7840_port->open)
                 tty_wakeup(tty);
@@ -804,7 +804,8 @@ static int mos7840_serial_probe(struct usb_serial *serial,
  *      Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty,
+                        struct usb_serial_port *port, struct file *filp)
 {
         int response;
         int j;
@@ -1008,8 +1009,8 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
          * the data through,otherwise it is scheduled, and with      *
          * high data rates (like with OHCI) data can get lost.       */
 
-        if (port->tty)
-                port->tty->low_latency = 1;
+        if (tty)
+                tty->low_latency = 1;
 /* Check to see if we've set up our endpoint info yet    *
      * (can't set it up in mos7840_startup as the structures *
      * were not set up at that time.)                        */
@@ -1104,11 +1105,12 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
  *      been written, but hasn't made it out the port yet)
  *      If successful, we return the number of bytes left to be written in the
  *      system,
- *      Otherwise we return a negative error number.
+ *      Otherwise we return zero.
  *****************************************************************************/
 
-static int mos7840_chars_in_buffer(struct usb_serial_port *port)
+static int mos7840_chars_in_buffer(struct tty_struct *tty)
 {
+        struct usb_serial_port *port = tty->driver_data;
         int i;
         int chars = 0;
         unsigned long flags;
@@ -1118,21 +1120,19 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
 
         if (mos7840_port_paranoia_check(port, __func__)) {
                 dbg("%s", "Invalid port \n");
-                return -1;
+                return 0;
         }
 
         mos7840_port = mos7840_get_port_private(port);
         if (mos7840_port == NULL) {
                 dbg("%s \n", "mos7840_break:leaving ...........");
-                return -1;
+                return 0;
         }
 
         spin_lock_irqsave(&mos7840_port->pool_lock,flags);
-        for (i = 0; i < NUM_URBS; ++i) {
-                if (mos7840_port->busy[i]) {
+        for (i = 0; i < NUM_URBS; ++i)
+                if (mos7840_port->busy[i])
                         chars += URB_TRANSFER_BUFFER_SIZE;
-                }
-        }
         spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
         dbg("%s - returns %d", __func__, chars);
         return chars;
@@ -1149,7 +1149,8 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
  *              3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
-static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
+static void mos7840_block_until_tx_empty(struct tty_struct *tty,
+                                struct moschip_port *mos7840_port)
 {
         int timeout = HZ / 10;
         int wait = 30;
@@ -1157,7 +1158,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
 
         while (1) {
 
-                count = mos7840_chars_in_buffer(mos7840_port->port);
+                count = mos7840_chars_in_buffer(tty);
 
                 /* Check for Buffer status */
                 if (count <= 0) {
@@ -1185,7 +1186,8 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
  *      this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct tty_struct *tty,
+                        struct usb_serial_port *port, struct file *filp)
 {
         struct usb_serial *serial;
         struct moschip_port *mos7840_port;
@@ -1226,20 +1228,17 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
                 }
         }
 
-        if (serial->dev) {
+        if (serial->dev)
                 /* flush and block until tx is empty */
-                mos7840_block_until_tx_empty(mos7840_port);
-        }
+                mos7840_block_until_tx_empty(tty, mos7840_port);
 
         /* While closing port, shutdown all bulk read, write  *
          * and interrupt read if they exists                  */
         if (serial->dev) {
-
                 if (mos7840_port->write_urb) {
                         dbg("%s", "Shutdown bulk write\n");
                         usb_kill_urb(mos7840_port->write_urb);
                 }
-
                 if (mos7840_port->read_urb) {
                         dbg("%s", "Shutdown bulk read\n");
                         usb_kill_urb(mos7840_port->read_urb);
@@ -1247,11 +1246,10 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
                 if ((&mos7840_port->control_urb)) {
                         dbg("%s", "Shutdown control read\n");
                         //      usb_kill_urb (mos7840_port->control_urb);
-
                 }
         }
-//              if(mos7840_port->ctrl_buf != NULL)
-//                      kfree(mos7840_port->ctrl_buf);
+//      if(mos7840_port->ctrl_buf != NULL)
+//              kfree(mos7840_port->ctrl_buf);
         port0->open_ports--;
         dbg("mos7840_num_open_ports in close%d:in port%d\n",
             port0->open_ports, port->number);
@@ -1293,15 +1291,15 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
  *
  ************************************************************************/
 
-static void mos7840_block_until_chase_response(struct moschip_port
-                                               *mos7840_port)
+static void mos7840_block_until_chase_response(struct tty_struct *tty,
+                                        struct moschip_port *mos7840_port)
 {
         int timeout = 1 * HZ;
         int wait = 10;
         int count;
 
         while (1) {
-                count = mos7840_chars_in_buffer(mos7840_port->port);
+                count = mos7840_chars_in_buffer(tty);
 
                 /* Check for Buffer status */
                 if (count <= 0) {
@@ -1328,8 +1326,9 @@ static void mos7840_block_until_chase_response(struct moschip_port
  * mos7840_break
  *      this function sends a break to the port
  *****************************************************************************/
-static void mos7840_break(struct usb_serial_port *port, int break_state)
+static void mos7840_break(struct tty_struct *tty, int break_state)
 {
+        struct usb_serial_port *port = tty->driver_data;
         unsigned char data;
         struct usb_serial *serial;
         struct moschip_port *mos7840_port;
@@ -1354,17 +1353,14 @@ static void mos7840_break(struct usb_serial_port *port, int break_state)
                 return;
         }
 
-        if (serial->dev) {
-
+        if (serial->dev)
                 /* flush and block until tx is empty */
-                mos7840_block_until_chase_response(mos7840_port);
-        }
+                mos7840_block_until_chase_response(tty, mos7840_port);
 
-        if (break_state == -1) {
+        if (break_state == -1)
                 data = mos7840_port->shadowLCR | LCR_SET_BREAK;
-        } else {
+        else
                 data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
-        }
 
         mos7840_port->shadowLCR = data;
         dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
@@ -1383,8 +1379,9 @@ static void mos7840_break(struct usb_serial_port *port, int break_state)
  *      Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write_room(struct usb_serial_port *port)
+static int mos7840_write_room(struct tty_struct *tty)
 {
+        struct usb_serial_port *port = tty->driver_data;
         int i;
         int room = 0;
         unsigned long flags;
@@ -1426,7 +1423,7 @@ static int mos7840_write_room(struct usb_serial_port *port)
  *      return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write(struct usb_serial_port *port,
+static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
                          const unsigned char *data, int count)
 {
         int status;
@@ -1555,8 +1552,7 @@ static int mos7840_write(struct usb_serial_port *port,
         mos7840_port->icount.tx += transfer_size;
         smp_wmb();
         dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
-      exit:
-
+exit:
         return bytes_sent;
 
 }
@@ -1567,10 +1563,10 @@ static int mos7840_write(struct usb_serial_port *port,
  *      being read from the port.
  *****************************************************************************/
 
-static void mos7840_throttle(struct usb_serial_port *port)
+static void mos7840_throttle(struct tty_struct *tty)
 {
+        struct usb_serial_port *port = tty->driver_data;
         struct moschip_port *mos7840_port;
-        struct tty_struct *tty;
         int status;
 
         if (mos7840_port_paranoia_check(port, __func__)) {
@@ -1592,32 +1588,21 @@ static void mos7840_throttle(struct usb_serial_port *port)
 
         dbg("%s", "Entering .......... \n");
 
-        tty = port->tty;
-        if (!tty) {
-                dbg("%s - no tty available", __func__);
-                return;
-        }
-
         /* if we are implementing XON/XOFF, send the stop character */
         if (I_IXOFF(tty)) {
                 unsigned char stop_char = STOP_CHAR(tty);
-                status = mos7840_write(port, &stop_char, 1);
-                if (status <= 0) {
+                status = mos7840_write(tty, port, &stop_char, 1);
+                if (status <= 0)
                         return;
-                }
         }
-
         /* if we are implementing RTS/CTS, toggle that line */
         if (tty->termios->c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR &= ~MCR_RTS;
                 status = 0;
-                status =
-                    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+                status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
-
-                if (status < 0) {
+                if (status < 0)
                         return;
-                }
         }
 
         return;
@@ -1628,9 +1613,9 @@ static void mos7840_throttle(struct usb_serial_port *port)
  *      this function is called by the tty driver when it wants to resume the data
  *      being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
-static void mos7840_unthrottle(struct usb_serial_port *port)
+static void mos7840_unthrottle(struct tty_struct *tty)
 {
-        struct tty_struct *tty;
+        struct usb_serial_port *port = tty->driver_data;
         int status;
         struct moschip_port *mos7840_port = mos7840_get_port_private(port);
 
@@ -1649,38 +1634,28 @@ static void mos7840_unthrottle(struct usb_serial_port *port)
 
         dbg("%s", "Entering .......... \n");
 
-        tty = port->tty;
-        if (!tty) {
-                dbg("%s - no tty available", __func__);
-                return;
-        }
-
         /* if we are implementing XON/XOFF, send the start character */
         if (I_IXOFF(tty)) {
                 unsigned char start_char = START_CHAR(tty);
-                status = mos7840_write(port, &start_char, 1);
-                if (status <= 0) {
+                status = mos7840_write(tty, port, &start_char, 1);
+                if (status <= 0)
                         return;
-                }
         }
 
         /* if we are implementing RTS/CTS, toggle that line */
         if (tty->termios->c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR |= MCR_RTS;
                 status = 0;
-                status =
-                    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+                status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
-                if (status < 0) {
+                if (status < 0)
                         return;
-                }
         }
-
-        return;
 }
 
-static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
+static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
 {
+        struct usb_serial_port *port = tty->driver_data;
         struct moschip_port *mos7840_port;
         unsigned int result;
         __u16 msr;
@@ -1708,9 +1683,10 @@ static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
         return result;
 }
 
-static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
+static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
                             unsigned int set, unsigned int clear)
 {
+        struct usb_serial_port *port = tty->driver_data;
         struct moschip_port *mos7840_port;
         unsigned int mcr;
         int status;
@@ -1949,10 +1925,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
  *      the specified new settings.
  *****************************************************************************/
 
-static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
-                                         struct ktermios *old_termios)
+static void mos7840_change_port_settings(struct tty_struct *tty,
+        struct moschip_port *mos7840_port, struct ktermios *old_termios)
 {
-        struct tty_struct *tty;
         int baud;
         unsigned cflag;
         unsigned iflag;
@@ -1988,8 +1963,6 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
                 return;
         }
 
-        tty = mos7840_port->port->tty;
-
         dbg("%s", "Entering .......... \n");
 
         lData = LCR_BITS_8;
@@ -2131,14 +2104,14 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
  *      the termios structure
  *****************************************************************************/
 
-static void mos7840_set_termios(struct usb_serial_port *port,
+static void mos7840_set_termios(struct tty_struct *tty,
+                                struct usb_serial_port *port,
                                 struct ktermios *old_termios)
 {
         int status;
         unsigned int cflag;
         struct usb_serial *serial;
         struct moschip_port *mos7840_port;
-        struct tty_struct *tty;
         dbg("mos7840_set_termios: START\n");
         if (mos7840_port_paranoia_check(port, __func__)) {
                 dbg("%s", "Invalid port \n");
@@ -2157,8 +2130,6 @@ static void mos7840_set_termios(struct usb_serial_port *port,
         if (mos7840_port == NULL)
                 return;
 
-        tty = port->tty;
-
         if (!mos7840_port->open) {
                 dbg("%s - port not opened", __func__);
                 return;
@@ -2176,7 +2147,7 @@ static void mos7840_set_termios(struct usb_serial_port *port,
 
         /* change the port settings to the new ones specified */
 
-        mos7840_change_port_settings(mos7840_port, old_termios);
+        mos7840_change_port_settings(tty, mos7840_port, old_termios);
 
         if (!mos7840_port->read_urb) {
                 dbg("%s", "URB KILLED !!!!!\n");
@@ -2205,13 +2176,13 @@ static void mos7840_set_termios(struct usb_serial_port *port,
  *          allows an RS485 driver to be written in user space.
  *****************************************************************************/
 
-static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
+static int mos7840_get_lsr_info(struct tty_struct *tty,
                                 unsigned int __user *value)
 {
         int count;
         unsigned int result = 0;
 
-        count = mos7840_chars_in_buffer(mos7840_port->port);
+        count = mos7840_chars_in_buffer(tty);
         if (count == 0) {
                 dbg("%s -- Empty", __func__);
                 result = TIOCSER_TEMT;
@@ -2227,6 +2198,8 @@ static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
  *      function to set modem info
  *****************************************************************************/
 
+/* FIXME: Should be using the model control hooks */
+
 static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
                                   unsigned int cmd, unsigned int __user *value)
 {
@@ -2304,9 +2277,8 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
         __u16 msr;
         unsigned int mcr = mos7840_port->shadowMCR;
         int status = 0;
-        status =
-            mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER,
-                                 &msr);
+        status = mos7840_get_uart_reg(mos7840_port->port,
+                                                MODEM_STATUS_REGISTER, &msr);
         result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)      /* 0x002 */
             |((mcr & MCR_RTS) ? TIOCM_RTS : 0)  /* 0x004 */
             |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)  /* 0x020 */
@@ -2359,12 +2331,12 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
  *      this function handles any ioctl calls to the driver
  *****************************************************************************/
 
-static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
                          unsigned int cmd, unsigned long arg)
 {
+        struct usb_serial_port *port = tty->driver_data;
         void __user *argp = (void __user *)arg;
         struct moschip_port *mos7840_port;
-        struct tty_struct *tty;
 
         struct async_icount cnow;
         struct async_icount cprev;
@@ -2381,8 +2353,6 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
         if (mos7840_port == NULL)
                 return -1;
 
-        tty = mos7840_port->port->tty;
-
         dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
         switch (cmd) {
@@ -2390,9 +2360,10 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
 
         case TIOCSERGETLSR:
                 dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-                return mos7840_get_lsr_info(mos7840_port, argp);
+                return mos7840_get_lsr_info(tty, argp);
                 return 0;
 
+        /* FIXME: use the modem hooks and remove this */
         case TIOCMBIS:
         case TIOCMBIC:
         case TIOCMSET:
@@ -2463,13 +2434,9 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
                 if (copy_to_user(argp, &icount, sizeof(icount)))
                         return -EFAULT;
                 return 0;
-
-        case TIOCEXBAUD:
-                return 0;
         default:
                 break;
         }
-
         return -ENOIOCTLCMD;
 }