Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 60 insertions, 0 deletions

diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
new file mode 100644
index 000000000000..a51fbb5ae45c
--- /dev/null
+++ b/drivers/usb/serial/kobil_sct.h
@@ -0,0 +1,60 @@
+#define SUSBCRequest_SetBaudRateParityAndStopBits       1
+#define SUSBCR_SBR_MASK                         0xFF00
+#define SUSBCR_SBR_1200                         0x0100
+#define SUSBCR_SBR_9600                         0x0200
+#define SUSBCR_SBR_19200                        0x0400
+#define SUSBCR_SBR_28800                        0x0800
+#define SUSBCR_SBR_38400                        0x1000
+#define SUSBCR_SBR_57600                        0x2000
+#define SUSBCR_SBR_115200                       0x4000
+
+#define SUSBCR_SPASB_MASK                       0x0070
+#define SUSBCR_SPASB_NoParity                   0x0010
+#define SUSBCR_SPASB_OddParity                  0x0020
+#define SUSBCR_SPASB_EvenParity                 0x0040
+
+#define SUSBCR_SPASB_STPMASK                    0x0003
+#define SUSBCR_SPASB_1StopBit                   0x0001
+#define SUSBCR_SPASB_2StopBits                  0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues     2
+#define SUSBCR_SSL_SETRTS                       0x0001
+#define SUSBCR_SSL_CLRRTS                       0x0002
+#define SUSBCR_SSL_SETDTR                       0x0004
+#define SUSBCR_SSL_CLRDTR                       0x0010
+
+#define SUSBCR_SSL_PURGE_TXABORT                0x0100  // Kill the pending/current writes to the comm port.
+#define SUSBCR_SSL_PURGE_RXABORT                0x0200  // Kill the pending/current reads to the comm port.
+#define SUSBCR_SSL_PURGE_TXCLEAR                0x0400  // Kill the transmit queue if there.
+#define SUSBCR_SSL_PURGE_RXCLEAR                0x0800  // Kill the typeahead buffer if there.
+
+#define SUSBCRequest_GetStatusLineState         4
+#define SUSBCR_GSL_RXCHAR                       0x0001  // Any Character received
+#define SUSBCR_GSL_TXEMPTY                      0x0004  // Transmitt Queue Empty
+#define SUSBCR_GSL_CTS                          0x0008  // CTS changed state
+#define SUSBCR_GSL_DSR                          0x0010  // DSR changed state
+#define SUSBCR_GSL_RLSD                         0x0020  // RLSD changed state
+#define SUSBCR_GSL_BREAK                        0x0040  // BREAK received
+#define SUSBCR_GSL_ERR                          0x0080  // Line status error occurred
+#define SUSBCR_GSL_RING                         0x0100  // Ring signal detected
+
+#define SUSBCRequest_Misc                       8
+#define SUSBCR_MSC_ResetReader                  0x0001  // use a predefined reset sequence
+#define SUSBCR_MSC_ResetAllQueues               0x0002  // use a predefined sequence to reset the internal queues
+
+#define SUSBCRequest_GetMisc                    0x10
+#define SUSBCR_MSC_GetFWVersion                 0x0001  /* get the firmware version from device,
+                                                           coded like this 0xHHLLBBPP
+                                                           with HH = Firmware Version High Byte
+                                                           LL = Firmware Version Low Byte
+                                                           BB = Build Number
+                                                           PP = Further Attributes
+                                                        */
+
+#define SUSBCR_MSC_GetHWVersion                 0x0002  /* get the hardware version from device
+                                                           coded like this 0xHHLLPPRR
+                                                           with HH = Software Version High Byte
+                                                           LL = Software Version Low Byte
+                                                           PP = Further Attributes
+                                                           RR = Reserved for the hardware ID 
+                                                        */