Merge commit 'v3.2-rc3' into next

10 files changed, 61 insertions, 44 deletions

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index fc34b8b11910..07a03460a598 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@ config USB_MUSB_HDRC
         select TWL4030_USB if MACH_OMAP_3430SDP
         select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
         select USB_OTG_UTILS
+        select USB_GADGET_DUALSPEED
         tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
         help
           Say Y here if your system has a dual role high speed USB
@@ -60,7 +61,7 @@ config USB_MUSB_BLACKFIN
 
 config USB_MUSB_UX500
         tristate "U8500 and U5500"
-        depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+        depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 08f1d0b662a3..e233d2b7d335 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 4da7492ddbdb..2613bfdb09b6 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a8b023..f9a3f62a83b5 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/cputype.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 20a28731c338..c1fa12ec7a9a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1477,8 +1477,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
-        defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
-        defined(CONFIG_ARCH_U5500)
+        defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4569e0..61f4ee466df7 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-#ifdef  CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
 #include <asm/uaccess.h>
 
 #include "musb_core.h"
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e81820370d6f..d51043acfe1a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -634,6 +634,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
         u16                     len;
         u16                     csr = musb_readw(epio, MUSB_RXCSR);
         struct musb_hw_ep       *hw_ep = &musb->endpoints[epnum];
+        u8                      use_mode_1;
 
         if (hw_ep->is_shared_fifo)
                 musb_ep = &hw_ep->ep_in;
@@ -683,6 +684,18 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
         if (csr & MUSB_RXCSR_RXPKTRDY) {
                 len = musb_readw(epio, MUSB_RXCOUNT);
+
+                /*
+                 * Enable Mode 1 on RX transfers only when short_not_ok flag
+                 * is set. Currently short_not_ok flag is set only from
+                 * file_storage and f_mass_storage drivers
+                 */
+
+                if (request->short_not_ok && len == musb_ep->packet_sz)
+                        use_mode_1 = 1;
+                else
+                        use_mode_1 = 0;
+
                 if (request->actual < request->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
                         if (is_buffer_mapped(req)) {
@@ -704,7 +717,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
          * most these gadgets, end of is signified either by a short packet,
          * or filling the last byte of the buffer.  (Sending extra data in
          * that last pckate should trigger an overflow fault.)  But in mode 1,
-         * we don't get DMA completion interrrupt for short packets.
+         * we don't get DMA completion interrupt for short packets.
          *
          * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
          * to get endpoint interrupt on every DMA req, but that didn't seem
@@ -714,37 +727,41 @@ static void rxstate(struct musb *musb, struct musb_request *req)
          * then becomes usable as a runtime "use mode 1" hint...
          */
 
-                                csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
-                                csr |= MUSB_RXCSR_AUTOCLEAR;
-                                /* csr |= MUSB_RXCSR_DMAMODE; */
-
-                                /* this special sequence (enabling and then
-                                 * disabling MUSB_RXCSR_DMAMODE) is required
-                                 * to get DMAReq to activate
-                                 */
-                                musb_writew(epio, MUSB_RXCSR,
-                                        csr | MUSB_RXCSR_DMAMODE);
-#else
-                                if (!musb_ep->hb_mult &&
-                                        musb_ep->hw_ep->rx_double_buffered)
+                                /* Experimental: Mode1 works with mass storage use cases */
+                                if (use_mode_1) {
                                         csr |= MUSB_RXCSR_AUTOCLEAR;
-#endif
-                                musb_writew(epio, MUSB_RXCSR, csr);
+                                        musb_writew(epio, MUSB_RXCSR, csr);
+                                        csr |= MUSB_RXCSR_DMAENAB;
+                                        musb_writew(epio, MUSB_RXCSR, csr);
+
+                                        /*
+                                         * this special sequence (enabling and then
+                                         * disabling MUSB_RXCSR_DMAMODE) is required
+                                         * to get DMAReq to activate
+                                         */
+                                        musb_writew(epio, MUSB_RXCSR,
+                                                csr | MUSB_RXCSR_DMAMODE);
+                                        musb_writew(epio, MUSB_RXCSR, csr);
+
+                                } else {
+                                        if (!musb_ep->hb_mult &&
+                                                musb_ep->hw_ep->rx_double_buffered)
+                                                csr |= MUSB_RXCSR_AUTOCLEAR;
+                                        csr |= MUSB_RXCSR_DMAENAB;
+                                        musb_writew(epio, MUSB_RXCSR, csr);
+                                }
 
                                 if (request->actual < request->length) {
                                         int transfer_size = 0;
-#ifdef USE_MODE1
-                                        transfer_size = min(request->length - request->actual,
-                                                        channel->max_len);
-#else
-                                        transfer_size = min(request->length - request->actual,
-                                                        (unsigned)len);
-#endif
-                                        if (transfer_size <= musb_ep->packet_sz)
-                                                musb_ep->dma->desired_mode = 0;
-                                        else
+                                        if (use_mode_1) {
+                                                transfer_size = min(request->length - request->actual,
+                                                                channel->max_len);
                                                 musb_ep->dma->desired_mode = 1;
+                                        } else {
+                                                transfer_size = min(request->length - request->actual,
+                                                                (unsigned)len);
+                                                musb_ep->dma->desired_mode = 0;
+                                        }
 
                                         use_dma = c->channel_program(
                                                         channel,
@@ -1020,7 +1037,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
                 goto fail;
 
         /* REVISIT this rules out high bandwidth periodic transfers */
-        tmp = le16_to_cpu(desc->wMaxPacketSize);
+        tmp = usb_endpoint_maxp(desc);
         if (tmp & ~0x07ff) {
                 int ok;
 
@@ -1982,10 +1999,6 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
                                         nuke(&hw_ep->ep_out, -ESHUTDOWN);
                         }
                 }
-
-                spin_unlock(&musb->lock);
-                driver->disconnect(&musb->g);
-                spin_lock(&musb->lock);
         }
 }
 
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 9378b359c1f0..6a0d0467ec74 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -679,6 +679,14 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
                         musb_readb(mbase, MUSB_FADDR),
                         decode_ep0stage(musb->ep0_state));
 
+        if (csr & MUSB_CSR0_P_DATAEND) {
+                /*
+                 * If DATAEND is set we should not call the callback,
+                 * hence the status stage is not complete.
+                 */
+                return IRQ_HANDLED;
+        }
+
         /* I sent a stall.. need to acknowledge it now.. */
         if (csr & MUSB_CSR0_P_SENTSTALL) {
                 musb_writew(regs, MUSB_CSR0,
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 8b2473fa0f47..60ddba8066ea 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1932,7 +1932,7 @@ static int musb_urb_enqueue(
         INIT_LIST_HEAD(&qh->ring);
         qh->is_ready = 1;
 
-        qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+        qh->maxpacket = usb_endpoint_maxp(epd);
         qh->type = usb_endpoint_type(epd);
 
         /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index f70c5a577736..57a608584e16 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -408,7 +408,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
         controller->controller.channel_program = dma_channel_program;
         controller->controller.channel_abort = dma_channel_abort;
 
-        if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+        if (request_irq(irq, dma_controller_irq, 0,
                         dev_name(musb->controller), &controller->controller)) {
                 dev_err(dev, "request_irq %d failed!\n", irq);
                 dma_controller_destroy(&controller->controller);