usbtouchscreen: add support for DMC TSC-10/25 devices

Adds support for the DMC TSC-10 and TSC-25 usb touchscreen controllers.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 95 insertions, 1 deletions

diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 933ceddf3dee..49704d4ed0e2 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -8,6 +8,7 @@
  *  - PanJit TouchSet
  *  - eTurboTouch
  *  - Gunze AHL61
+ *  - DMC TSC-10/25
  *
  * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -30,6 +31,8 @@
  * - ITM parts are from itmtouch.c
  * - 3M parts are from mtouchusb.c
  * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ *   driver from Marius Vollmer
  *
  *****************************************************************************/
 
@@ -44,7 +47,7 @@
 #include <linux/usb/input.h>
 
 
-#define DRIVER_VERSION          "v0.4"
+#define DRIVER_VERSION          "v0.5"
 #define DRIVER_AUTHOR           "Daniel Ritz <daniel.ritz@gmx.ch>"
 #define DRIVER_DESC             "USB Touchscreen Driver"
 
@@ -103,6 +106,7 @@ enum {
         DEVTYPE_ITM,
         DEVTYPE_ETURBO,
         DEVTYPE_GUNZE,
+        DEVTYPE_DMC_TSC10,
 };
 
 static struct usb_device_id usbtouch_devices[] = {
@@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = {
         {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
 #endif
 
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+        {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
         {}
 };
 
@@ -313,6 +321,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *
 #endif
 
 /*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT        0x50
+#define TSC10_RATE_30           0x40
+#define TSC10_RATE_50           0x41
+#define TSC10_RATE_80           0x42
+#define TSC10_RATE_100          0x43
+#define TSC10_RATE_130          0x44
+#define TSC10_RATE_150          0x45
+
+/* commands */
+#define TSC10_CMD_RESET         0x55
+#define TSC10_CMD_RATE          0x05
+#define TSC10_CMD_DATA1         0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+        struct usb_device *dev = usbtouch->udev;
+        int ret;
+        unsigned char buf[2];
+
+        /* reset */
+        buf[0] = buf[1] = 0xFF;
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_RESET,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+        if (buf[0] != 0x06 || buf[1] != 0x00)
+                return -ENODEV;
+
+        /* set coordinate output rate */
+        buf[0] = buf[1] = 0xFF;
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_RATE,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+        if (buf[0] != 0x06 || buf[1] != 0x00)
+                return -ENODEV;
+
+        /* start sending data */
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_DATA1,
+                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+
+
+static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+        *x = ((pkt[2] & 0x03) << 8) | pkt[1];
+        *y = ((pkt[4] & 0x03) << 8) | pkt[3];
+        *touch = pkt[0] & 0x01;
+
+        return 1;
+}
+#endif
+
+
+/*****************************************************************************
  * the different device descriptors
  */
 static struct usbtouch_device_info usbtouch_dev_info[] = {
@@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
                 .read_data      = gunze_read_data,
         },
 #endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+        [DEVTYPE_DMC_TSC10] = {
+                .min_xc         = 0x0,
+                .max_xc         = 0x03ff,
+                .min_yc         = 0x0,
+                .max_yc         = 0x03ff,
+                .rept_size      = 5,
+                .init           = dmc_tsc10_init,
+                .read_data      = dmc_tsc10_read_data,
+        },
+#endif
 };