aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2007-04-22 14:05:52 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2007-04-27 16:28:42 -0400
commit1b101ceb9162086035ce0c9cbe83ca7b4845179a (patch)
tree3ff40a54a969a0e456f51ddd0b36a32b17cc34c8 /drivers/usb/host
parentb8d297c93a888fcd4d74ba0bbeeabe9b84caf514 (diff)
USB: remove ancient/broken CRIS hcd
Remove the old crisv10 HCD ... it can't have built for some time, doesn't even have a Kconfig entry, was the last driver not to have been converted to the "hcd" framework, and considering the usbcore changes since its last patch was merged, has just got to buggy as all get-out. I'm told Axis has a new driver, and will be submitting it soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/hc_crisv10.c4550
-rw-r--r--drivers/usb/host/hc_crisv10.h289
3 files changed, 0 insertions, 4840 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a2e58c86849f..2ff396bd180f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -15,4 +15,3 @@ obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
15obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o 15obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
16obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o 16obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
17obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o 17obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
18obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
deleted file mode 100644
index 32f7caf24747..000000000000
--- a/drivers/usb/host/hc_crisv10.c
+++ /dev/null
@@ -1,4550 +0,0 @@
1/*
2 * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD)
3 *
4 * Copyright (c) 2002, 2003 Axis Communications AB.
5 */
6
7#include <linux/kernel.h>
8#include <linux/delay.h>
9#include <linux/ioport.h>
10#include <linux/slab.h>
11#include <linux/errno.h>
12#include <linux/unistd.h>
13#include <linux/interrupt.h>
14#include <linux/init.h>
15#include <linux/list.h>
16#include <linux/spinlock.h>
17
18#include <asm/uaccess.h>
19#include <asm/io.h>
20#include <asm/irq.h>
21#include <asm/dma.h>
22#include <asm/system.h>
23#include <asm/arch/svinto.h>
24
25#include <linux/usb.h>
26/* Ugly include because we don't live with the other host drivers. */
27#include <../drivers/usb/core/hcd.h>
28#include <../drivers/usb/core/usb.h>
29
30#include "hc_crisv10.h"
31
32#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
33#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
34#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
35
36static const char *usb_hcd_version = "$Revision: 1.2 $";
37
38#undef KERN_DEBUG
39#define KERN_DEBUG ""
40
41
42#undef USB_DEBUG_RH
43#undef USB_DEBUG_EPID
44#undef USB_DEBUG_SB
45#undef USB_DEBUG_DESC
46#undef USB_DEBUG_URB
47#undef USB_DEBUG_TRACE
48#undef USB_DEBUG_BULK
49#undef USB_DEBUG_CTRL
50#undef USB_DEBUG_INTR
51#undef USB_DEBUG_ISOC
52
53#ifdef USB_DEBUG_RH
54#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg)
55#else
56#define dbg_rh(format, arg...) do {} while (0)
57#endif
58
59#ifdef USB_DEBUG_EPID
60#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg)
61#else
62#define dbg_epid(format, arg...) do {} while (0)
63#endif
64
65#ifdef USB_DEBUG_SB
66#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg)
67#else
68#define dbg_sb(format, arg...) do {} while (0)
69#endif
70
71#ifdef USB_DEBUG_CTRL
72#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg)
73#else
74#define dbg_ctrl(format, arg...) do {} while (0)
75#endif
76
77#ifdef USB_DEBUG_BULK
78#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg)
79#else
80#define dbg_bulk(format, arg...) do {} while (0)
81#endif
82
83#ifdef USB_DEBUG_INTR
84#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg)
85#else
86#define dbg_intr(format, arg...) do {} while (0)
87#endif
88
89#ifdef USB_DEBUG_ISOC
90#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg)
91#else
92#define dbg_isoc(format, arg...) do {} while (0)
93#endif
94
95#ifdef USB_DEBUG_TRACE
96#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
97#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
98#else
99#define DBFENTER do {} while (0)
100#define DBFEXIT do {} while (0)
101#endif
102
103#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
104
105/*-------------------------------------------------------------------
106 Virtual Root Hub
107 -------------------------------------------------------------------*/
108
109static __u8 root_hub_dev_des[] =
110{
111 0x12, /* __u8 bLength; */
112 0x01, /* __u8 bDescriptorType; Device */
113 0x00, /* __le16 bcdUSB; v1.0 */
114 0x01,
115 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
116 0x00, /* __u8 bDeviceSubClass; */
117 0x00, /* __u8 bDeviceProtocol; */
118 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
119 0x00, /* __le16 idVendor; */
120 0x00,
121 0x00, /* __le16 idProduct; */
122 0x00,
123 0x00, /* __le16 bcdDevice; */
124 0x00,
125 0x00, /* __u8 iManufacturer; */
126 0x02, /* __u8 iProduct; */
127 0x01, /* __u8 iSerialNumber; */
128 0x01 /* __u8 bNumConfigurations; */
129};
130
131/* Configuration descriptor */
132static __u8 root_hub_config_des[] =
133{
134 0x09, /* __u8 bLength; */
135 0x02, /* __u8 bDescriptorType; Configuration */
136 0x19, /* __le16 wTotalLength; */
137 0x00,
138 0x01, /* __u8 bNumInterfaces; */
139 0x01, /* __u8 bConfigurationValue; */
140 0x00, /* __u8 iConfiguration; */
141 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */
142 0x00, /* __u8 MaxPower; */
143
144 /* interface */
145 0x09, /* __u8 if_bLength; */
146 0x04, /* __u8 if_bDescriptorType; Interface */
147 0x00, /* __u8 if_bInterfaceNumber; */
148 0x00, /* __u8 if_bAlternateSetting; */
149 0x01, /* __u8 if_bNumEndpoints; */
150 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
151 0x00, /* __u8 if_bInterfaceSubClass; */
152 0x00, /* __u8 if_bInterfaceProtocol; */
153 0x00, /* __u8 if_iInterface; */
154
155 /* endpoint */
156 0x07, /* __u8 ep_bLength; */
157 0x05, /* __u8 ep_bDescriptorType; Endpoint */
158 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
159 0x03, /* __u8 ep_bmAttributes; Interrupt */
160 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */
161 0x00,
162 0xff /* __u8 ep_bInterval; 255 ms */
163};
164
165static __u8 root_hub_hub_des[] =
166{
167 0x09, /* __u8 bLength; */
168 0x29, /* __u8 bDescriptorType; Hub-descriptor */
169 0x02, /* __u8 bNbrPorts; */
170 0x00, /* __u16 wHubCharacteristics; */
171 0x00,
172 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
173 0x00, /* __u8 bHubContrCurrent; 0 mA */
174 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
175 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
176};
177
178static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0);
179static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0);
180
181/* We want the start timer to expire before the eot timer, because the former might start
182 traffic, thus making it unnecessary for the latter to time out. */
183#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */
184#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */
185
186#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break
187#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
188{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
189
190#define SLAB_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
191#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
192
193/* Most helpful debugging aid */
194#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
195
196/* Alternative assert define which stops after a failed assert. */
197/*
198#define assert(expr) \
199{ \
200 if (!(expr)) { \
201 err("assert failed at line %d",__LINE__); \
202 while (1); \
203 } \
204}
205*/
206
207
208/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically?
209 To adjust it dynamically we would have to get an interrupt when we reach the end
210 of the rx descriptor list, or when we get close to the end, and then allocate more
211 descriptors. */
212
213#define NBR_OF_RX_DESC 512
214#define RX_DESC_BUF_SIZE 1024
215#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
216
217/* The number of epids is, among other things, used for pre-allocating
218 ctrl, bulk and isoc EP descriptors (one for each epid).
219 Assumed to be > 1 when initiating the DMA lists. */
220#define NBR_OF_EPIDS 32
221
222/* Support interrupt traffic intervals up to 128 ms. */
223#define MAX_INTR_INTERVAL 128
224
225/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table
226 must be "invalid". By this we mean that we shouldn't care about epid attentions
227 for this epid, or at least handle them differently from epid attentions for "valid"
228 epids. This define determines which one to use (don't change it). */
229#define INVALID_EPID 31
230/* A special epid for the bulk dummys. */
231#define DUMMY_EPID 30
232
233/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */
234static __u32 epid_usage_bitmask;
235
236/* A bitfield to keep information on in/out traffic is needed to uniquely identify
237 an endpoint on a device, since the most significant bit which indicates traffic
238 direction is lacking in the ep_id field (ETRAX epids can handle both in and
239 out traffic on endpoints that are otherwise identical). The USB framework, however,
240 relies on them to be handled separately. For example, bulk IN and OUT urbs cannot
241 be queued in the same list, since they would block each other. */
242static __u32 epid_out_traffic;
243
244/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
245 Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */
246static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
247static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
248
249/* Pointers into RxDescList. */
250static volatile USB_IN_Desc_t *myNextRxDesc;
251static volatile USB_IN_Desc_t *myLastRxDesc;
252static volatile USB_IN_Desc_t *myPrevRxDesc;
253
254/* EP descriptors must be 32-bit aligned. */
255static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
256static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
257/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set,
258 causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
259 gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
260 EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
261 in each frame. */
262static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
263
264static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
265static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4)));
266
267static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
268static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4)));
269
270/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting
271 this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0
272 results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point
273 it to this buffer. */
274static int zout_buffer[4] __attribute__ ((aligned (4)));
275
276/* Cache for allocating new EP and SB descriptors. */
277static struct kmem_cache *usb_desc_cache;
278
279/* Cache for the registers allocated in the top half. */
280static struct kmem_cache *top_half_reg_cache;
281
282/* Cache for the data allocated in the isoc descr top half. */
283static struct kmem_cache *isoc_compl_cache;
284
285static struct usb_bus *etrax_usb_bus;
286
287/* This is a circular (double-linked) list of the active urbs for each epid.
288 The head is never removed, and new urbs are linked onto the list as
289 urb_entry_t elements. Don't reference urb_list directly; use the wrapper
290 functions instead. Note that working with these lists might require spinlock
291 protection. */
292static struct list_head urb_list[NBR_OF_EPIDS];
293
294/* Read about the need and usage of this lock in submit_ctrl_urb. */
295static spinlock_t urb_list_lock;
296
297/* Used when unlinking asynchronously. */
298static struct list_head urb_unlink_list;
299
300/* for returning string descriptors in UTF-16LE */
301static int ascii2utf (char *ascii, __u8 *utf, int utfmax)
302{
303 int retval;
304
305 for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) {
306 *utf++ = *ascii++ & 0x7f;
307 *utf++ = 0;
308 }
309 return retval;
310}
311
312static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
313{
314 char buf [30];
315
316 // assert (len > (2 * (sizeof (buf) + 1)));
317 // assert (strlen (type) <= 8);
318
319 // language ids
320 if (id == 0) {
321 *data++ = 4; *data++ = 3; /* 4 bytes data */
322 *data++ = 0; *data++ = 0; /* some language id */
323 return 4;
324
325 // serial number
326 } else if (id == 1) {
327 sprintf (buf, "%x", serial);
328
329 // product description
330 } else if (id == 2) {
331 sprintf (buf, "USB %s Root Hub", type);
332
333 // id 3 == vendor description
334
335 // unsupported IDs --> "stall"
336 } else
337 return 0;
338
339 data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
340 data [1] = 3;
341 return data [0];
342}
343
344/* Wrappers around the list functions (include/linux/list.h). */
345
346static inline int urb_list_empty(int epid)
347{
348 return list_empty(&urb_list[epid]);
349}
350
351/* Returns first urb for this epid, or NULL if list is empty. */
352static inline struct urb *urb_list_first(int epid)
353{
354 struct urb *first_urb = 0;
355
356 if (!urb_list_empty(epid)) {
357 /* Get the first urb (i.e. head->next). */
358 urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
359 first_urb = urb_entry->urb;
360 }
361 return first_urb;
362}
363
364/* Adds an urb_entry last in the list for this epid. */
365static inline void urb_list_add(struct urb *urb, int epid)
366{
367 urb_entry_t *urb_entry = kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
368 assert(urb_entry);
369
370 urb_entry->urb = urb;
371 list_add_tail(&urb_entry->list, &urb_list[epid]);
372}
373
374/* Search through the list for an element that contains this urb. (The list
375 is expected to be short and the one we are about to delete will often be
376 the first in the list.) */
377static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid)
378{
379 struct list_head *entry;
380 struct list_head *tmp;
381 urb_entry_t *urb_entry;
382
383 list_for_each_safe(entry, tmp, &urb_list[epid]) {
384 urb_entry = list_entry(entry, urb_entry_t, list);
385 assert(urb_entry);
386 assert(urb_entry->urb);
387
388 if (urb_entry->urb == urb) {
389 return urb_entry;
390 }
391 }
392 return 0;
393}
394
395/* Delete an urb from the list. */
396static inline void urb_list_del(struct urb *urb, int epid)
397{
398 urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
399 assert(urb_entry);
400
401 /* Delete entry and free. */
402 list_del(&urb_entry->list);
403 kfree(urb_entry);
404}
405
406/* Move an urb to the end of the list. */
407static inline void urb_list_move_last(struct urb *urb, int epid)
408{
409 urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
410 assert(urb_entry);
411
412 list_move_tail(&urb_entry->list, &urb_list[epid]);
413}
414
415/* Get the next urb in the list. */
416static inline struct urb *urb_list_next(struct urb *urb, int epid)
417{
418 urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
419
420 assert(urb_entry);
421
422 if (urb_entry->list.next != &urb_list[epid]) {
423 struct list_head *elem = urb_entry->list.next;
424 urb_entry = list_entry(elem, urb_entry_t, list);
425 return urb_entry->urb;
426 } else {
427 return NULL;
428 }
429}
430
431
432
433/* For debug purposes only. */
434static inline void urb_list_dump(int epid)
435{
436 struct list_head *entry;
437 struct list_head *tmp;
438 urb_entry_t *urb_entry;
439 int i = 0;
440
441 info("Dumping urb list for epid %d", epid);
442
443 list_for_each_safe(entry, tmp, &urb_list[epid]) {
444 urb_entry = list_entry(entry, urb_entry_t, list);
445 info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb);
446 }
447}
448
449static void init_rx_buffers(void);
450static int etrax_rh_unlink_urb(struct urb *urb);
451static void etrax_rh_send_irq(struct urb *urb);
452static void etrax_rh_init_int_timer(struct urb *urb);
453static void etrax_rh_int_timer_do(unsigned long ptr);
454
455static int etrax_usb_setup_epid(struct urb *urb);
456static int etrax_usb_lookup_epid(struct urb *urb);
457static int etrax_usb_allocate_epid(void);
458static void etrax_usb_free_epid(int epid);
459
460static int etrax_remove_from_sb_list(struct urb *urb);
461
462static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
463 unsigned mem_flags, dma_addr_t *dma);
464static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
465
466static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid);
467static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid);
468static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid);
469static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid);
470
471static int etrax_usb_submit_bulk_urb(struct urb *urb);
472static int etrax_usb_submit_ctrl_urb(struct urb *urb);
473static int etrax_usb_submit_intr_urb(struct urb *urb);
474static int etrax_usb_submit_isoc_urb(struct urb *urb);
475
476static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags);
477static int etrax_usb_unlink_urb(struct urb *urb, int status);
478static int etrax_usb_get_frame_number(struct usb_device *usb_dev);
479
480static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc);
481static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc);
482static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc);
483static void etrax_usb_hc_interrupt_bottom_half(void *data);
484
485static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data);
486
487
488/* The following is a list of interrupt handlers for the host controller interrupts we use.
489 They are called from etrax_usb_hc_interrupt_bottom_half. */
490static void etrax_usb_hc_isoc_eof_interrupt(void);
491static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced);
492static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg);
493static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg);
494static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg);
495
496static int etrax_rh_submit_urb (struct urb *urb);
497
498/* Forward declaration needed because they are used in the rx interrupt routine. */
499static void etrax_usb_complete_urb(struct urb *urb, int status);
500static void etrax_usb_complete_bulk_urb(struct urb *urb, int status);
501static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status);
502static void etrax_usb_complete_intr_urb(struct urb *urb, int status);
503static void etrax_usb_complete_isoc_urb(struct urb *urb, int status);
504
505static int etrax_usb_hc_init(void);
506static void etrax_usb_hc_cleanup(void);
507
508static struct usb_operations etrax_usb_device_operations =
509{
510 .get_frame_number = etrax_usb_get_frame_number,
511 .submit_urb = etrax_usb_submit_urb,
512 .unlink_urb = etrax_usb_unlink_urb,
513 .buffer_alloc = etrax_usb_buffer_alloc,
514 .buffer_free = etrax_usb_buffer_free
515};
516
517/* Note that these functions are always available in their "__" variants, for use in
518 error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/
519 USB_DEBUG_URB macros. */
520static void __dump_urb(struct urb* purb)
521{
522 printk("\nurb :0x%08lx\n", (unsigned long)purb);
523 printk("dev :0x%08lx\n", (unsigned long)purb->dev);
524 printk("pipe :0x%08x\n", purb->pipe);
525 printk("status :%d\n", purb->status);
526 printk("transfer_flags :0x%08x\n", purb->transfer_flags);
527 printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
528 printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
529 printk("actual_length :%d\n", purb->actual_length);
530 printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
531 printk("start_frame :%d\n", purb->start_frame);
532 printk("number_of_packets :%d\n", purb->number_of_packets);
533 printk("interval :%d\n", purb->interval);
534 printk("error_count :%d\n", purb->error_count);
535 printk("context :0x%08lx\n", (unsigned long)purb->context);
536 printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
537}
538
539static void __dump_in_desc(volatile USB_IN_Desc_t *in)
540{
541 printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
542 printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
543 printk(" command : 0x%04x\n", in->command);
544 printk(" next : 0x%08lx\n", in->next);
545 printk(" buf : 0x%08lx\n", in->buf);
546 printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
547 printk(" status : 0x%04x\n\n", in->status);
548}
549
550static void __dump_sb_desc(volatile USB_SB_Desc_t *sb)
551{
552 char tt = (sb->command & 0x30) >> 4;
553 char *tt_string;
554
555 switch (tt) {
556 case 0:
557 tt_string = "zout";
558 break;
559 case 1:
560 tt_string = "in";
561 break;
562 case 2:
563 tt_string = "out";
564 break;
565 case 3:
566 tt_string = "setup";
567 break;
568 default:
569 tt_string = "unknown (weird)";
570 }
571
572 printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb);
573 printk(" command : 0x%04x\n", sb->command);
574 printk(" rem : %d\n", (sb->command & 0x3f00) >> 8);
575 printk(" full : %d\n", (sb->command & 0x40) >> 6);
576 printk(" tt : %d (%s)\n", tt, tt_string);
577 printk(" intr : %d\n", (sb->command & 0x8) >> 3);
578 printk(" eot : %d\n", (sb->command & 0x2) >> 1);
579 printk(" eol : %d\n", sb->command & 0x1);
580 printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len);
581 printk(" next : 0x%08lx\n", sb->next);
582 printk(" buf : 0x%08lx\n\n", sb->buf);
583}
584
585
586static void __dump_ep_desc(volatile USB_EP_Desc_t *ep)
587{
588 printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep);
589 printk(" command : 0x%04x\n", ep->command);
590 printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8);
591 printk(" enable : %d\n", (ep->command & 0x10) >> 4);
592 printk(" intr : %d\n", (ep->command & 0x8) >> 3);
593 printk(" eof : %d\n", (ep->command & 0x2) >> 1);
594 printk(" eol : %d\n", ep->command & 0x1);
595 printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len);
596 printk(" next : 0x%08lx\n", ep->next);
597 printk(" sub : 0x%08lx\n\n", ep->sub);
598}
599
600static inline void __dump_ep_list(int pipe_type)
601{
602 volatile USB_EP_Desc_t *ep;
603 volatile USB_EP_Desc_t *first_ep;
604 volatile USB_SB_Desc_t *sb;
605
606 switch (pipe_type)
607 {
608 case PIPE_BULK:
609 first_ep = &TxBulkEPList[0];
610 break;
611 case PIPE_CONTROL:
612 first_ep = &TxCtrlEPList[0];
613 break;
614 case PIPE_INTERRUPT:
615 first_ep = &TxIntrEPList[0];
616 break;
617 case PIPE_ISOCHRONOUS:
618 first_ep = &TxIsocEPList[0];
619 break;
620 default:
621 warn("Cannot dump unknown traffic type");
622 return;
623 }
624 ep = first_ep;
625
626 printk("\n\nDumping EP list...\n\n");
627
628 do {
629 __dump_ep_desc(ep);
630 /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
631 sb = ep->sub ? phys_to_virt(ep->sub) : 0;
632 while (sb) {
633 __dump_sb_desc(sb);
634 sb = sb->next ? phys_to_virt(sb->next) : 0;
635 }
636 ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next));
637
638 } while (ep != first_ep);
639}
640
641static inline void __dump_ept_data(int epid)
642{
643 unsigned long flags;
644 __u32 r_usb_ept_data;
645
646 if (epid < 0 || epid > 31) {
647 printk("Cannot dump ept data for invalid epid %d\n", epid);
648 return;
649 }
650
651 save_flags(flags);
652 cli();
653 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
654 nop();
655 r_usb_ept_data = *R_USB_EPT_DATA;
656 restore_flags(flags);
657
658 printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
659 if (r_usb_ept_data == 0) {
660 /* No need for more detailed printing. */
661 return;
662 }
663 printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
664 printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
665 printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
666 printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
667 printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
668 printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
669 printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
670 printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
671 printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
672 printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
673 printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
674 printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
675}
676
677static inline void __dump_ept_data_list(void)
678{
679 int i;
680
681 printk("Dumping the whole R_USB_EPT_DATA list\n");
682
683 for (i = 0; i < 32; i++) {
684 __dump_ept_data(i);
685 }
686}
687#ifdef USB_DEBUG_DESC
688#define dump_in_desc(...) __dump_in_desc(...)
689#define dump_sb_desc(...) __dump_sb_desc(...)
690#define dump_ep_desc(...) __dump_ep_desc(...)
691#else
692#define dump_in_desc(...) do {} while (0)
693#define dump_sb_desc(...) do {} while (0)
694#define dump_ep_desc(...) do {} while (0)
695#endif
696
697#ifdef USB_DEBUG_URB
698#define dump_urb(x) __dump_urb(x)
699#else
700#define dump_urb(x) do {} while (0)
701#endif
702
703static void init_rx_buffers(void)
704{
705 int i;
706
707 DBFENTER;
708
709 for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
710 RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
711 RxDescList[i].command = 0;
712 RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
713 RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
714 RxDescList[i].hw_len = 0;
715 RxDescList[i].status = 0;
716
717 /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc
718 for the relevant fields.) */
719 prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
720
721 }
722
723 RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
724 RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
725 RxDescList[i].next = virt_to_phys(&RxDescList[0]);
726 RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
727 RxDescList[i].hw_len = 0;
728 RxDescList[i].status = 0;
729
730 myNextRxDesc = &RxDescList[0];
731 myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
732 myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
733
734 *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
735 *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
736
737 DBFEXIT;
738}
739
740static void init_tx_bulk_ep(void)
741{
742 int i;
743
744 DBFENTER;
745
746 for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
747 CHECK_ALIGN(&TxBulkEPList[i]);
748 TxBulkEPList[i].hw_len = 0;
749 TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
750 TxBulkEPList[i].sub = 0;
751 TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]);
752
753 /* Initiate two EPs, disabled and with the eol flag set. No need for any
754 preserved epid. */
755
756 /* The first one has the intr flag set so we get an interrupt when the DMA
757 channel is about to become disabled. */
758 CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
759 TxBulkDummyEPList[i][0].hw_len = 0;
760 TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
761 IO_STATE(USB_EP_command, eol, yes) |
762 IO_STATE(USB_EP_command, intr, yes));
763 TxBulkDummyEPList[i][0].sub = 0;
764 TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
765
766 /* The second one. */
767 CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
768 TxBulkDummyEPList[i][1].hw_len = 0;
769 TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
770 IO_STATE(USB_EP_command, eol, yes));
771 TxBulkDummyEPList[i][1].sub = 0;
772 /* The last dummy's next pointer is the same as the current EP's next pointer. */
773 TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
774 }
775
776 /* Configure the last one. */
777 CHECK_ALIGN(&TxBulkEPList[i]);
778 TxBulkEPList[i].hw_len = 0;
779 TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
780 IO_FIELD(USB_EP_command, epid, i));
781 TxBulkEPList[i].sub = 0;
782 TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]);
783
784 /* No need configuring dummy EPs for the last one as it will never be used for
785 bulk traffic (i == INVALD_EPID at this point). */
786
787 /* Set up to start on the last EP so we will enable it when inserting traffic
788 for the first time (imitating the situation where the DMA has stopped
789 because there was no more traffic). */
790 *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
791 /* No point in starting the bulk channel yet.
792 *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
793 DBFEXIT;
794}
795
796static void init_tx_ctrl_ep(void)
797{
798 int i;
799
800 DBFENTER;
801
802 for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
803 CHECK_ALIGN(&TxCtrlEPList[i]);
804 TxCtrlEPList[i].hw_len = 0;
805 TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
806 TxCtrlEPList[i].sub = 0;
807 TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]);
808 }
809
810 CHECK_ALIGN(&TxCtrlEPList[i]);
811 TxCtrlEPList[i].hw_len = 0;
812 TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
813 IO_FIELD(USB_EP_command, epid, i));
814
815 TxCtrlEPList[i].sub = 0;
816 TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]);
817
818 *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]);
819 *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
820
821 DBFEXIT;
822}
823
824
825static void init_tx_intr_ep(void)
826{
827 int i;
828
829 DBFENTER;
830
831 /* Read comment at zout_buffer declaration for an explanation to this. */
832 TxIntrSB_zout.sw_len = 1;
833 TxIntrSB_zout.next = 0;
834 TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
835 TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
836 IO_STATE(USB_SB_command, tt, zout) |
837 IO_STATE(USB_SB_command, full, yes) |
838 IO_STATE(USB_SB_command, eot, yes) |
839 IO_STATE(USB_SB_command, eol, yes));
840
841 for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
842 CHECK_ALIGN(&TxIntrEPList[i]);
843 TxIntrEPList[i].hw_len = 0;
844 TxIntrEPList[i].command =
845 (IO_STATE(USB_EP_command, eof, yes) |
846 IO_STATE(USB_EP_command, enable, yes) |
847 IO_FIELD(USB_EP_command, epid, INVALID_EPID));
848 TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
849 TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
850 }
851
852 CHECK_ALIGN(&TxIntrEPList[i]);
853 TxIntrEPList[i].hw_len = 0;
854 TxIntrEPList[i].command =
855 (IO_STATE(USB_EP_command, eof, yes) |
856 IO_STATE(USB_EP_command, eol, yes) |
857 IO_STATE(USB_EP_command, enable, yes) |
858 IO_FIELD(USB_EP_command, epid, INVALID_EPID));
859 TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
860 TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
861
862 *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
863 *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
864 DBFEXIT;
865}
866
867static void init_tx_isoc_ep(void)
868{
869 int i;
870
871 DBFENTER;
872
873 /* Read comment at zout_buffer declaration for an explanation to this. */
874 TxIsocSB_zout.sw_len = 1;
875 TxIsocSB_zout.next = 0;
876 TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
877 TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
878 IO_STATE(USB_SB_command, tt, zout) |
879 IO_STATE(USB_SB_command, full, yes) |
880 IO_STATE(USB_SB_command, eot, yes) |
881 IO_STATE(USB_SB_command, eol, yes));
882
883 /* The last isochronous EP descriptor is a dummy. */
884
885 for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
886 CHECK_ALIGN(&TxIsocEPList[i]);
887 TxIsocEPList[i].hw_len = 0;
888 TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
889 TxIsocEPList[i].sub = 0;
890 TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
891 }
892
893 CHECK_ALIGN(&TxIsocEPList[i]);
894 TxIsocEPList[i].hw_len = 0;
895
896 /* Must enable the last EP descr to get eof interrupt. */
897 TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
898 IO_STATE(USB_EP_command, eof, yes) |
899 IO_STATE(USB_EP_command, eol, yes) |
900 IO_FIELD(USB_EP_command, epid, INVALID_EPID));
901 TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
902 TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
903
904 *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
905 *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
906
907 DBFEXIT;
908}
909
910static void etrax_usb_unlink_intr_urb(struct urb *urb)
911{
912 volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */
913 volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */
914 volatile USB_EP_Desc_t *next_ep; /* The EP after current. */
915 volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */
916
917 int epid;
918
919 /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */
920
921 DBFENTER;
922
923 epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid;
924
925 first_ep = &TxIntrEPList[0];
926 curr_ep = first_ep;
927
928
929 /* Note that this loop removes all EP descriptors with this epid. This assumes
930 that all EP descriptors belong to the one and only urb for this epid. */
931
932 do {
933 next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next);
934
935 if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
936
937 dbg_intr("Found EP to unlink for epid %d", epid);
938
939 /* This is the one we should unlink. */
940 unlink_ep = next_ep;
941
942 /* Actually unlink the EP from the DMA list. */
943 curr_ep->next = unlink_ep->next;
944
945 /* Wait until the DMA is no longer at this descriptor. */
946 while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep));
947
948 /* Now we are free to remove it and its SB descriptor.
949 Note that it is assumed here that there is only one sb in the
950 sb list for this ep. */
951 kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub));
952 kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep);
953 }
954
955 curr_ep = phys_to_virt(curr_ep->next);
956
957 } while (curr_ep != first_ep);
958 urb->hcpriv = NULL;
959}
960
961void etrax_usb_do_intr_recover(int epid)
962{
963 USB_EP_Desc_t *first_ep, *tmp_ep;
964
965 DBFENTER;
966
967 first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP);
968 tmp_ep = first_ep;
969
970 /* What this does is simply to walk the list of interrupt
971 ep descriptors and enable those that are disabled. */
972
973 do {
974 if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid &&
975 !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) {
976 tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes);
977 }
978
979 tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
980
981 } while (tmp_ep != first_ep);
982
983
984 DBFEXIT;
985}
986
987static int etrax_rh_unlink_urb (struct urb *urb)
988{
989 etrax_hc_t *hc;
990
991 DBFENTER;
992
993 hc = urb->dev->bus->hcpriv;
994
995 if (hc->rh.urb == urb) {
996 hc->rh.send = 0;
997 del_timer(&hc->rh.rh_int_timer);
998 }
999
1000 DBFEXIT;
1001 return 0;
1002}
1003
1004static void etrax_rh_send_irq(struct urb *urb)
1005{
1006 __u16 data = 0;
1007 etrax_hc_t *hc = urb->dev->bus->hcpriv;
1008 DBFENTER;
1009
1010/*
1011 dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER);
1012 dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING);
1013*/
1014
1015 data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0;
1016 data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0;
1017
1018 *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data);
1019 /* FIXME: Why is actual_length set to 1 when data is 2 bytes?
1020 Since only 1 byte is used, why not declare data as __u8? */
1021 urb->actual_length = 1;
1022 urb->status = 0;
1023
1024 if (hc->rh.send && urb->complete) {
1025 dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1);
1026 dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2);
1027
1028 urb->complete(urb, NULL);
1029 }
1030
1031 DBFEXIT;
1032}
1033
1034static void etrax_rh_init_int_timer(struct urb *urb)
1035{
1036 etrax_hc_t *hc;
1037
1038 DBFENTER;
1039
1040 hc = urb->dev->bus->hcpriv;
1041 hc->rh.interval = urb->interval;
1042 init_timer(&hc->rh.rh_int_timer);
1043 hc->rh.rh_int_timer.function = etrax_rh_int_timer_do;
1044 hc->rh.rh_int_timer.data = (unsigned long)urb;
1045 /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped
1046 to 0, and the rest to the nearest lower 10 ms. */
1047 hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000);
1048 add_timer(&hc->rh.rh_int_timer);
1049
1050 DBFEXIT;
1051}
1052
1053static void etrax_rh_int_timer_do(unsigned long ptr)
1054{
1055 struct urb *urb;
1056 etrax_hc_t *hc;
1057
1058 DBFENTER;
1059
1060 urb = (struct urb*)ptr;
1061 hc = urb->dev->bus->hcpriv;
1062
1063 if (hc->rh.send) {
1064 etrax_rh_send_irq(urb);
1065 }
1066
1067 DBFEXIT;
1068}
1069
1070static int etrax_usb_setup_epid(struct urb *urb)
1071{
1072 int epid;
1073 char devnum, endpoint, out_traffic, slow;
1074 int maxlen;
1075 unsigned long flags;
1076
1077 DBFENTER;
1078
1079 epid = etrax_usb_lookup_epid(urb);
1080 if ((epid != -1)){
1081 /* An epid that fits this urb has been found. */
1082 DBFEXIT;
1083 return epid;
1084 }
1085
1086 /* We must find and initiate a new epid for this urb. */
1087 epid = etrax_usb_allocate_epid();
1088
1089 if (epid == -1) {
1090 /* Failed to allocate a new epid. */
1091 DBFEXIT;
1092 return epid;
1093 }
1094
1095 /* We now have a new epid to use. Initiate it. */
1096 set_bit(epid, (void *)&epid_usage_bitmask);
1097
1098 devnum = usb_pipedevice(urb->pipe);
1099 endpoint = usb_pipeendpoint(urb->pipe);
1100 slow = usb_pipeslow(urb->pipe);
1101 maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
1102 if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
1103 /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
1104 out_traffic = 1;
1105 } else {
1106 out_traffic = usb_pipeout(urb->pipe);
1107 }
1108
1109 save_flags(flags);
1110 cli();
1111
1112 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
1113 nop();
1114
1115 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1116 *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
1117 /* FIXME: Change any to the actual port? */
1118 IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
1119 IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
1120 IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
1121 IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
1122 } else {
1123 *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) |
1124 IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
1125 /* FIXME: Change any to the actual port? */
1126 IO_STATE(R_USB_EPT_DATA, port, any) |
1127 IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
1128 IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
1129 IO_FIELD(R_USB_EPT_DATA, dev, devnum);
1130 }
1131
1132 restore_flags(flags);
1133
1134 if (out_traffic) {
1135 set_bit(epid, (void *)&epid_out_traffic);
1136 } else {
1137 clear_bit(epid, (void *)&epid_out_traffic);
1138 }
1139
1140 dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)",
1141 epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN");
1142
1143 DBFEXIT;
1144 return epid;
1145}
1146
1147static void etrax_usb_free_epid(int epid)
1148{
1149 unsigned long flags;
1150
1151 DBFENTER;
1152
1153 if (!test_bit(epid, (void *)&epid_usage_bitmask)) {
1154 warn("Trying to free unused epid %d", epid);
1155 DBFEXIT;
1156 return;
1157 }
1158
1159 save_flags(flags);
1160 cli();
1161
1162 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
1163 nop();
1164 while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold));
1165 /* This will, among other things, set the valid field to 0. */
1166 *R_USB_EPT_DATA = 0;
1167 restore_flags(flags);
1168
1169 clear_bit(epid, (void *)&epid_usage_bitmask);
1170
1171
1172 dbg_epid("Freed epid %d", epid);
1173
1174 DBFEXIT;
1175}
1176
1177static int etrax_usb_lookup_epid(struct urb *urb)
1178{
1179 int i;
1180 __u32 data;
1181 char devnum, endpoint, slow, out_traffic;
1182 int maxlen;
1183 unsigned long flags;
1184
1185 DBFENTER;
1186
1187 devnum = usb_pipedevice(urb->pipe);
1188 endpoint = usb_pipeendpoint(urb->pipe);
1189 slow = usb_pipeslow(urb->pipe);
1190 maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
1191 if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
1192 /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
1193 out_traffic = 1;
1194 } else {
1195 out_traffic = usb_pipeout(urb->pipe);
1196 }
1197
1198 /* Step through att epids. */
1199 for (i = 0; i < NBR_OF_EPIDS; i++) {
1200 if (test_bit(i, (void *)&epid_usage_bitmask) &&
1201 test_bit(i, (void *)&epid_out_traffic) == out_traffic) {
1202
1203 save_flags(flags);
1204 cli();
1205 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i);
1206 nop();
1207
1208 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1209 data = *R_USB_EPT_DATA_ISO;
1210 restore_flags(flags);
1211
1212 if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) &&
1213 (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) &&
1214 (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) &&
1215 (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) {
1216 dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
1217 i, devnum, endpoint, out_traffic ? "OUT" : "IN");
1218 DBFEXIT;
1219 return i;
1220 }
1221 } else {
1222 data = *R_USB_EPT_DATA;
1223 restore_flags(flags);
1224
1225 if ((IO_MASK(R_USB_EPT_DATA, valid) & data) &&
1226 (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) &&
1227 (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) &&
1228 (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) &&
1229 (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) {
1230 dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
1231 i, devnum, endpoint, out_traffic ? "OUT" : "IN");
1232 DBFEXIT;
1233 return i;
1234 }
1235 }
1236 }
1237 }
1238
1239 DBFEXIT;
1240 return -1;
1241}
1242
1243static int etrax_usb_allocate_epid(void)
1244{
1245 int i;
1246
1247 DBFENTER;
1248
1249 for (i = 0; i < NBR_OF_EPIDS; i++) {
1250 if (!test_bit(i, (void *)&epid_usage_bitmask)) {
1251 dbg_epid("Found free epid %d", i);
1252 DBFEXIT;
1253 return i;
1254 }
1255 }
1256
1257 dbg_epid("Found no free epids");
1258 DBFEXIT;
1259 return -1;
1260}
1261
1262static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags)
1263{
1264 etrax_hc_t *hc;
1265 int ret = -EINVAL;
1266
1267 DBFENTER;
1268
1269 if (!urb->dev || !urb->dev->bus) {
1270 return -ENODEV;
1271 }
1272 if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) {
1273 info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe);
1274 return -EMSGSIZE;
1275 }
1276
1277 if (urb->timeout) {
1278 /* FIXME. */
1279 warn("urb->timeout specified, ignoring.");
1280 }
1281
1282 hc = (etrax_hc_t*)urb->dev->bus->hcpriv;
1283
1284 if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
1285 /* This request is for the Virtual Root Hub. */
1286 ret = etrax_rh_submit_urb(urb);
1287
1288 } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
1289
1290 ret = etrax_usb_submit_bulk_urb(urb);
1291
1292 } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
1293
1294 ret = etrax_usb_submit_ctrl_urb(urb);
1295
1296 } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
1297 int bustime;
1298
1299 if (urb->bandwidth == 0) {
1300 bustime = usb_check_bandwidth(urb->dev, urb);
1301 if (bustime < 0) {
1302 ret = bustime;
1303 } else {
1304 ret = etrax_usb_submit_intr_urb(urb);
1305 if (ret == 0)
1306 usb_claim_bandwidth(urb->dev, urb, bustime, 0);
1307 }
1308 } else {
1309 /* Bandwidth already set. */
1310 ret = etrax_usb_submit_intr_urb(urb);
1311 }
1312
1313 } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1314 int bustime;
1315
1316 if (urb->bandwidth == 0) {
1317 bustime = usb_check_bandwidth(urb->dev, urb);
1318 if (bustime < 0) {
1319 ret = bustime;
1320 } else {
1321 ret = etrax_usb_submit_isoc_urb(urb);
1322 if (ret == 0)
1323 usb_claim_bandwidth(urb->dev, urb, bustime, 0);
1324 }
1325 } else {
1326 /* Bandwidth already set. */
1327 ret = etrax_usb_submit_isoc_urb(urb);
1328 }
1329 }
1330
1331 DBFEXIT;
1332
1333 if (ret != 0)
1334 printk("Submit URB error %d\n", ret);
1335
1336 return ret;
1337}
1338
1339static int etrax_usb_unlink_urb(struct urb *urb, int status)
1340{
1341 etrax_hc_t *hc;
1342 etrax_urb_priv_t *urb_priv;
1343 int epid;
1344 unsigned int flags;
1345
1346 DBFENTER;
1347
1348 if (!urb) {
1349 return -EINVAL;
1350 }
1351
1352 /* Disable interrupts here since a descriptor interrupt for the isoc epid
1353 will modify the sb list. This could possibly be done more granular, but
1354 unlink_urb should not be used frequently anyway.
1355 */
1356
1357 save_flags(flags);
1358 cli();
1359
1360 if (!urb->dev || !urb->dev->bus) {
1361 restore_flags(flags);
1362 return -ENODEV;
1363 }
1364 if (!urb->hcpriv) {
1365 /* This happens if a device driver calls unlink on an urb that
1366 was never submitted (lazy driver) or if the urb was completed
1367 while unlink was being called. */
1368 restore_flags(flags);
1369 return 0;
1370 }
1371 if (urb->transfer_flags & URB_ASYNC_UNLINK) {
1372 /* FIXME. */
1373 /* If URB_ASYNC_UNLINK is set:
1374 unlink
1375 move to a separate urb list
1376 call complete at next sof with ECONNRESET
1377
1378 If not:
1379 wait 1 ms
1380 unlink
1381 call complete with ENOENT
1382 */
1383 warn("URB_ASYNC_UNLINK set, ignoring.");
1384 }
1385
1386 /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking,
1387 but that doesn't work for interrupt and isochronous traffic since they are completed
1388 repeatedly, and urb->status is set then. That may in itself be a bug though. */
1389
1390 hc = urb->dev->bus->hcpriv;
1391 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
1392 epid = urb_priv->epid;
1393
1394 /* Set the urb status (synchronous unlink). */
1395 urb->status = -ENOENT;
1396 urb_priv->urb_state = UNLINK;
1397
1398 if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
1399 int ret;
1400 ret = etrax_rh_unlink_urb(urb);
1401 DBFEXIT;
1402 restore_flags(flags);
1403 return ret;
1404
1405 } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
1406
1407 dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb);
1408
1409 if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
1410 /* The EP was enabled, disable it and wait. */
1411 TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
1412
1413 /* Ah, the luxury of busy-wait. */
1414 while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid]));
1415 }
1416 /* Kicking dummy list out of the party. */
1417 TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
1418
1419 } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
1420
1421 dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb);
1422
1423 if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
1424 /* The EP was enabled, disable it and wait. */
1425 TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
1426
1427 /* Ah, the luxury of busy-wait. */
1428 while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid]));
1429 }
1430
1431 } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
1432
1433 dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb);
1434
1435 /* Separate function because it's a tad more complicated. */
1436 etrax_usb_unlink_intr_urb(urb);
1437
1438 } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1439
1440 dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb);
1441
1442 if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
1443 /* The EP was enabled, disable it and wait. */
1444 TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
1445
1446 /* Ah, the luxury of busy-wait. */
1447 while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
1448 }
1449 }
1450
1451 /* Note that we need to remove the urb from the urb list *before* removing its SB
1452 descriptors. (This means that the isoc eof handler might get a null urb when we
1453 are unlinking the last urb.) */
1454
1455 if (usb_pipetype(urb->pipe) == PIPE_BULK) {
1456
1457 urb_list_del(urb, epid);
1458 TxBulkEPList[epid].sub = 0;
1459 etrax_remove_from_sb_list(urb);
1460
1461 } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
1462
1463 urb_list_del(urb, epid);
1464 TxCtrlEPList[epid].sub = 0;
1465 etrax_remove_from_sb_list(urb);
1466
1467 } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
1468
1469 urb_list_del(urb, epid);
1470 /* Sanity check (should never happen). */
1471 assert(urb_list_empty(epid));
1472
1473 /* Release allocated bandwidth. */
1474 usb_release_bandwidth(urb->dev, urb, 0);
1475
1476 } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1477
1478 if (usb_pipeout(urb->pipe)) {
1479
1480 USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb;
1481
1482 if (__urb_list_entry(urb, epid)) {
1483
1484 urb_list_del(urb, epid);
1485 iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
1486 prev_sb = 0;
1487 while (iter_sb && (iter_sb != urb_priv->first_sb)) {
1488 prev_sb = iter_sb;
1489 iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
1490 }
1491
1492 if (iter_sb == 0) {
1493 /* Unlink of the URB currently being transmitted. */
1494 prev_sb = 0;
1495 iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
1496 }
1497
1498 while (iter_sb && (iter_sb != urb_priv->last_sb)) {
1499 iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
1500 }
1501 if (iter_sb) {
1502 next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
1503 } else {
1504 /* This should only happen if the DMA has completed
1505 processing the SB list for this EP while interrupts
1506 are disabled. */
1507 dbg_isoc("Isoc urb not found, already sent?");
1508 next_sb = 0;
1509 }
1510 if (prev_sb) {
1511 prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
1512 } else {
1513 TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
1514 }
1515
1516 etrax_remove_from_sb_list(urb);
1517 if (urb_list_empty(epid)) {
1518 TxIsocEPList[epid].sub = 0;
1519 dbg_isoc("Last isoc out urb epid %d", epid);
1520 } else if (next_sb || prev_sb) {
1521 dbg_isoc("Re-enable isoc out epid %d", epid);
1522
1523 TxIsocEPList[epid].hw_len = 0;
1524 TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
1525 } else {
1526 TxIsocEPList[epid].sub = 0;
1527 dbg_isoc("URB list non-empty and no SB list, EP disabled");
1528 }
1529 } else {
1530 dbg_isoc("Urb 0x%p not found, completed already?", urb);
1531 }
1532 } else {
1533
1534 urb_list_del(urb, epid);
1535
1536 /* For in traffic there is only one SB descriptor for each EP even
1537 though there may be several urbs (all urbs point at the same SB). */
1538 if (urb_list_empty(epid)) {
1539 /* No more urbs, remove the SB. */
1540 TxIsocEPList[epid].sub = 0;
1541 etrax_remove_from_sb_list(urb);
1542 } else {
1543 TxIsocEPList[epid].hw_len = 0;
1544 TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
1545 }
1546 }
1547 /* Release allocated bandwidth. */
1548 usb_release_bandwidth(urb->dev, urb, 1);
1549 }
1550 /* Free the epid if urb list is empty. */
1551 if (urb_list_empty(epid)) {
1552 etrax_usb_free_epid(epid);
1553 }
1554 restore_flags(flags);
1555
1556 /* Must be done before calling completion handler. */
1557 kfree(urb_priv);
1558 urb->hcpriv = 0;
1559
1560 if (urb->complete) {
1561 urb->complete(urb, NULL);
1562 }
1563
1564 DBFEXIT;
1565 return 0;
1566}
1567
1568static int etrax_usb_get_frame_number(struct usb_device *usb_dev)
1569{
1570 DBFENTER;
1571 DBFEXIT;
1572 return (*R_USB_FM_NUMBER & 0x7ff);
1573}
1574
1575static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc)
1576{
1577 DBFENTER;
1578
1579 /* This interrupt handler could be used when unlinking EP descriptors. */
1580
1581 if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
1582 USB_EP_Desc_t *ep;
1583
1584 //dbg_bulk("dma8_sub0_descr (BULK) intr.");
1585
1586 /* It should be safe clearing the interrupt here, since we don't expect to get a new
1587 one until we restart the bulk channel. */
1588 *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
1589
1590 /* Wait while the DMA is running (though we don't expect it to be). */
1591 while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd));
1592
1593 /* Advance the DMA to the next EP descriptor. */
1594 ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
1595
1596 //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep);
1597
1598 /* ep->next is already a physical address; no need for a virt_to_phys. */
1599 *R_DMA_CH8_SUB0_EP = ep->next;
1600
1601 /* Start the DMA bulk channel again. */
1602 *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
1603 }
1604 if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
1605 struct urb *urb;
1606 int epid;
1607 etrax_urb_priv_t *urb_priv;
1608 unsigned long int flags;
1609
1610 dbg_ctrl("dma8_sub1_descr (CTRL) intr.");
1611 *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
1612
1613 /* The complete callback gets called so we cli. */
1614 save_flags(flags);
1615 cli();
1616
1617 for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
1618 if ((TxCtrlEPList[epid].sub == 0) ||
1619 (epid == DUMMY_EPID) ||
1620 (epid == INVALID_EPID)) {
1621 /* Nothing here to see. */
1622 continue;
1623 }
1624
1625 /* Get the first urb (if any). */
1626 urb = urb_list_first(epid);
1627
1628 if (urb) {
1629
1630 /* Sanity check. */
1631 assert(usb_pipetype(urb->pipe) == PIPE_CONTROL);
1632
1633 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
1634 assert(urb_priv);
1635
1636 if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) {
1637 assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
1638
1639 etrax_usb_complete_urb(urb, 0);
1640 }
1641 }
1642 }
1643 restore_flags(flags);
1644 }
1645 if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
1646 dbg_intr("dma8_sub2_descr (INTR) intr.");
1647 *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
1648 }
1649 if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
1650 struct urb *urb;
1651 int epid;
1652 int epid_done;
1653 etrax_urb_priv_t *urb_priv;
1654 USB_SB_Desc_t *sb_desc;
1655
1656 usb_isoc_complete_data_t *comp_data = NULL;
1657
1658 /* One or more isoc out transfers are done. */
1659 dbg_isoc("dma8_sub3_descr (ISOC) intr.");
1660
1661 /* For each isoc out EP search for the first sb_desc with the intr flag
1662 set. This descriptor must be the last packet from an URB. Then
1663 traverse the URB list for the EP until the URB with urb_priv->last_sb
1664 matching the intr-marked sb_desc is found. All URBs before this have
1665 been sent.
1666 */
1667
1668 for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
1669 /* Skip past epids with no SB lists, epids used for in traffic,
1670 and special (dummy, invalid) epids. */
1671 if ((TxIsocEPList[epid].sub == 0) ||
1672 (test_bit(epid, (void *)&epid_out_traffic) == 0) ||
1673 (epid == DUMMY_EPID) ||
1674 (epid == INVALID_EPID)) {
1675 /* Nothing here to see. */
1676 continue;
1677 }
1678 sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
1679
1680 /* Find the last descriptor of the currently active URB for this ep.
1681 This is the first descriptor in the sub list marked for a descriptor
1682 interrupt. */
1683 while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
1684 sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
1685 }
1686 assert(sb_desc);
1687
1688 dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p",
1689 epid,
1690 phys_to_virt(TxIsocEPList[epid].sub),
1691 sb_desc);
1692
1693 epid_done = 0;
1694
1695 /* Get the first urb (if any). */
1696 urb = urb_list_first(epid);
1697 assert(urb);
1698
1699 while (urb && !epid_done) {
1700
1701 /* Sanity check. */
1702 assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
1703
1704 if (!usb_pipeout(urb->pipe)) {
1705 /* descr interrupts are generated only for out pipes. */
1706 epid_done = 1;
1707 continue;
1708 }
1709
1710 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
1711 assert(urb_priv);
1712
1713 if (sb_desc != urb_priv->last_sb) {
1714
1715 /* This urb has been sent. */
1716 dbg_isoc("out URB 0x%p sent", urb);
1717
1718 urb_priv->urb_state = TRANSFER_DONE;
1719
1720 } else if ((sb_desc == urb_priv->last_sb) &&
1721 !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
1722
1723 assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes));
1724 assert(sb_desc->next == 0);
1725
1726 dbg_isoc("out URB 0x%p last in list, epid disabled", urb);
1727 TxIsocEPList[epid].sub = 0;
1728 TxIsocEPList[epid].hw_len = 0;
1729 urb_priv->urb_state = TRANSFER_DONE;
1730
1731 epid_done = 1;
1732
1733 } else {
1734 epid_done = 1;
1735 }
1736 if (!epid_done) {
1737 urb = urb_list_next(urb, epid);
1738 }
1739 }
1740
1741 }
1742
1743 *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
1744
1745 comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC);
1746 assert(comp_data != NULL);
1747
1748 INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data);
1749 schedule_work(&comp_data->usb_bh);
1750 }
1751
1752 DBFEXIT;
1753 return IRQ_HANDLED;
1754}
1755
1756static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data)
1757{
1758 usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data;
1759
1760 struct urb *urb;
1761 int epid;
1762 int epid_done;
1763 etrax_urb_priv_t *urb_priv;
1764
1765 DBFENTER;
1766
1767 dbg_isoc("dma8_sub3_descr (ISOC) bottom half.");
1768
1769 for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
1770 unsigned long flags;
1771
1772 save_flags(flags);
1773 cli();
1774
1775 epid_done = 0;
1776
1777 /* The descriptor interrupt handler has marked all transmitted isoch. out
1778 URBs with TRANSFER_DONE. Now we traverse all epids and for all that
1779 have isoch. out traffic traverse its URB list and complete the
1780 transmitted URB.
1781 */
1782
1783 while (!epid_done) {
1784
1785 /* Get the first urb (if any). */
1786 urb = urb_list_first(epid);
1787 if (urb == 0) {
1788 epid_done = 1;
1789 continue;
1790 }
1791
1792 if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
1793 epid_done = 1;
1794 continue;
1795 }
1796
1797 if (!usb_pipeout(urb->pipe)) {
1798 /* descr interrupts are generated only for out pipes. */
1799 epid_done = 1;
1800 continue;
1801 }
1802
1803 dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub);
1804
1805 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
1806 assert(urb_priv);
1807
1808 if (urb_priv->urb_state == TRANSFER_DONE) {
1809 int i;
1810 struct usb_iso_packet_descriptor *packet;
1811
1812 /* This urb has been sent. */
1813 dbg_isoc("Completing isoc out URB 0x%p", urb);
1814
1815 for (i = 0; i < urb->number_of_packets; i++) {
1816 packet = &urb->iso_frame_desc[i];
1817 packet->status = 0;
1818 packet->actual_length = packet->length;
1819 }
1820
1821 etrax_usb_complete_isoc_urb(urb, 0);
1822
1823 if (urb_list_empty(epid)) {
1824 etrax_usb_free_epid(epid);
1825 epid_done = 1;
1826 }
1827 } else {
1828 epid_done = 1;
1829 }
1830 }
1831 restore_flags(flags);
1832
1833 }
1834 kmem_cache_free(isoc_compl_cache, comp_data);
1835
1836 DBFEXIT;
1837}
1838
1839
1840
1841static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc)
1842{
1843 struct urb *urb;
1844 etrax_urb_priv_t *urb_priv;
1845 int epid = 0;
1846 unsigned long flags;
1847
1848 /* Isoc diagnostics. */
1849 static int curr_fm = 0;
1850 static int prev_fm = 0;
1851
1852 DBFENTER;
1853
1854 /* Clear this interrupt. */
1855 *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
1856
1857 /* Note that this while loop assumes that all packets span only
1858 one rx descriptor. */
1859
1860 /* The reason we cli here is that we call the driver's callback functions. */
1861 save_flags(flags);
1862 cli();
1863
1864 while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
1865
1866 epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
1867 urb = urb_list_first(epid);
1868
1869 //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb);
1870
1871 if (!urb) {
1872 err("No urb for epid %d in rx interrupt", epid);
1873 __dump_ept_data(epid);
1874 goto skip_out;
1875 }
1876
1877 /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since
1878 ctrl pipes are not. */
1879
1880 if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
1881 __u32 r_usb_ept_data;
1882 int no_error = 0;
1883
1884 assert(test_bit(epid, (void *)&epid_usage_bitmask));
1885
1886 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
1887 nop();
1888 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1889 r_usb_ept_data = *R_USB_EPT_DATA_ISO;
1890
1891 if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
1892 (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
1893 (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
1894 /* Not an error, just a failure to receive an expected iso
1895 in packet in this frame. This is not documented
1896 in the designers reference.
1897 */
1898 no_error++;
1899 } else {
1900 warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data);
1901 }
1902 } else {
1903 r_usb_ept_data = *R_USB_EPT_DATA;
1904 warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data);
1905 }
1906
1907 if (!no_error){
1908 warn("error in rx desc->status, epid %d, first urb = 0x%lx",
1909 epid, (unsigned long)urb);
1910 __dump_in_desc(myNextRxDesc);
1911
1912 warn("R_USB_STATUS = 0x%x", *R_USB_STATUS);
1913
1914 /* Check that ept was disabled when error occurred. */
1915 switch (usb_pipetype(urb->pipe)) {
1916 case PIPE_BULK:
1917 assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
1918 break;
1919 case PIPE_CONTROL:
1920 assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
1921 break;
1922 case PIPE_INTERRUPT:
1923 assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable)));
1924 break;
1925 case PIPE_ISOCHRONOUS:
1926 assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)));
1927 break;
1928 default:
1929 warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p",
1930 usb_pipetype(urb->pipe),
1931 urb);
1932 }
1933 etrax_usb_complete_urb(urb, -EPROTO);
1934 goto skip_out;
1935 }
1936 }
1937
1938 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
1939 assert(urb_priv);
1940
1941 if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
1942 (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
1943 (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
1944
1945 if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
1946 /* We get nodata for empty data transactions, and the rx descriptor's
1947 hw_len field is not valid in that case. No data to copy in other
1948 words. */
1949 } else {
1950 /* Make sure the data fits in the buffer. */
1951 assert(urb_priv->rx_offset + myNextRxDesc->hw_len
1952 <= urb->transfer_buffer_length);
1953
1954 memcpy(urb->transfer_buffer + urb_priv->rx_offset,
1955 phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
1956 urb_priv->rx_offset += myNextRxDesc->hw_len;
1957 }
1958
1959 if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
1960 if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) &&
1961 ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) ==
1962 IO_STATE(USB_EP_command, enable, yes))) {
1963 /* The EP is still enabled, so the OUT packet used to ack
1964 the in data is probably not processed yet. If the EP
1965 sub pointer has not moved beyond urb_priv->last_sb mark
1966 it for a descriptor interrupt and complete the urb in
1967 the descriptor interrupt handler.
1968 */
1969 USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0;
1970
1971 while ((sub != NULL) && (sub != urb_priv->last_sb)) {
1972 sub = sub->next ? phys_to_virt(sub->next) : 0;
1973 }
1974 if (sub != NULL) {
1975 /* The urb has not been fully processed. */
1976 urb_priv->urb_state = WAITING_FOR_DESCR_INTR;
1977 } else {
1978 warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub);
1979 etrax_usb_complete_urb(urb, 0);
1980 }
1981 } else {
1982 etrax_usb_complete_urb(urb, 0);
1983 }
1984 }
1985
1986 } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1987
1988 struct usb_iso_packet_descriptor *packet;
1989
1990 if (urb_priv->urb_state == UNLINK) {
1991 info("Ignoring rx data for urb being unlinked.");
1992 goto skip_out;
1993 } else if (urb_priv->urb_state == NOT_STARTED) {
1994 info("What? Got rx data for urb that isn't started?");
1995 goto skip_out;
1996 }
1997
1998 packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
1999 packet->status = 0;
2000
2001 if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
2002 /* We get nodata for empty data transactions, and the rx descriptor's
2003 hw_len field is not valid in that case. We copy 0 bytes however to
2004 stay in synch. */
2005 packet->actual_length = 0;
2006 } else {
2007 packet->actual_length = myNextRxDesc->hw_len;
2008 /* Make sure the data fits in the buffer. */
2009 assert(packet->actual_length <= packet->length);
2010 memcpy(urb->transfer_buffer + packet->offset,
2011 phys_to_virt(myNextRxDesc->buf), packet->actual_length);
2012 }
2013
2014 /* Increment the packet counter. */
2015 urb_priv->isoc_packet_counter++;
2016
2017 /* Note that we don't care about the eot field in the rx descriptor's status.
2018 It will always be set for isoc traffic. */
2019 if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
2020
2021 /* Out-of-synch diagnostics. */
2022 curr_fm = (*R_USB_FM_NUMBER & 0x7ff);
2023 if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) {
2024 /* This test is wrong, if there is more than one isoc
2025 in endpoint active it will always calculate wrong
2026 since prev_fm is shared by all endpoints.
2027
2028 FIXME Make this check per URB using urb->start_frame.
2029 */
2030 dbg_isoc("Out of synch? Previous frame = %d, current frame = %d",
2031 prev_fm, curr_fm);
2032
2033 }
2034 prev_fm = curr_fm;
2035
2036 /* Complete the urb with status OK. */
2037 etrax_usb_complete_isoc_urb(urb, 0);
2038 }
2039 }
2040
2041 skip_out:
2042
2043 /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr
2044 has the same layout as USB_IN_Desc for the relevant fields.) */
2045 prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc);
2046
2047 myPrevRxDesc = myNextRxDesc;
2048 myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol);
2049 myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
2050 myLastRxDesc = myPrevRxDesc;
2051
2052 myNextRxDesc->status = 0;
2053 myNextRxDesc = phys_to_virt(myNextRxDesc->next);
2054 }
2055
2056 restore_flags(flags);
2057
2058 DBFEXIT;
2059
2060 return IRQ_HANDLED;
2061}
2062
2063
2064/* This function will unlink the SB descriptors associated with this urb. */
2065static int etrax_remove_from_sb_list(struct urb *urb)
2066{
2067 USB_SB_Desc_t *next_sb, *first_sb, *last_sb;
2068 etrax_urb_priv_t *urb_priv;
2069 int i = 0;
2070
2071 DBFENTER;
2072
2073 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2074 assert(urb_priv);
2075
2076 /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor
2077 doesn't really need to be disabled, it's just that we expect it to be. */
2078 if (usb_pipetype(urb->pipe) == PIPE_BULK) {
2079 assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
2080 } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
2081 assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
2082 }
2083
2084 first_sb = urb_priv->first_sb;
2085 last_sb = urb_priv->last_sb;
2086
2087 assert(first_sb);
2088 assert(last_sb);
2089
2090 while (first_sb != last_sb) {
2091 next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next);
2092 kmem_cache_free(usb_desc_cache, first_sb);
2093 first_sb = next_sb;
2094 i++;
2095 }
2096 kmem_cache_free(usb_desc_cache, last_sb);
2097 i++;
2098 dbg_sb("%d SB descriptors freed", i);
2099 /* Compare i with urb->number_of_packets for Isoc traffic.
2100 Should be same when calling unlink_urb */
2101
2102 DBFEXIT;
2103
2104 return i;
2105}
2106
2107static int etrax_usb_submit_bulk_urb(struct urb *urb)
2108{
2109 int epid;
2110 int empty;
2111 unsigned long flags;
2112 etrax_urb_priv_t *urb_priv;
2113
2114 DBFENTER;
2115
2116 /* Epid allocation, empty check and list add must be protected.
2117 Read about this in etrax_usb_submit_ctrl_urb. */
2118
2119 spin_lock_irqsave(&urb_list_lock, flags);
2120 epid = etrax_usb_setup_epid(urb);
2121 if (epid == -1) {
2122 DBFEXIT;
2123 spin_unlock_irqrestore(&urb_list_lock, flags);
2124 return -ENOMEM;
2125 }
2126 empty = urb_list_empty(epid);
2127 urb_list_add(urb, epid);
2128 spin_unlock_irqrestore(&urb_list_lock, flags);
2129
2130 dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d",
2131 usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid);
2132
2133 /* Mark the urb as being in progress. */
2134 urb->status = -EINPROGRESS;
2135
2136 /* Setup the hcpriv data. */
2137 urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
2138 assert(urb_priv != NULL);
2139 /* This sets rx_offset to 0. */
2140 urb_priv->urb_state = NOT_STARTED;
2141 urb->hcpriv = urb_priv;
2142
2143 if (empty) {
2144 etrax_usb_add_to_bulk_sb_list(urb, epid);
2145 }
2146
2147 DBFEXIT;
2148
2149 return 0;
2150}
2151
2152static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid)
2153{
2154 USB_SB_Desc_t *sb_desc;
2155 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2156 unsigned long flags;
2157 char maxlen;
2158
2159 DBFENTER;
2160
2161 dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb);
2162
2163 maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
2164
2165 sb_desc = kmem_cache_zalloc(usb_desc_cache, SLAB_FLAG);
2166 assert(sb_desc != NULL);
2167
2168
2169 if (usb_pipeout(urb->pipe)) {
2170
2171 dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid);
2172
2173 /* This is probably a sanity check of the bulk transaction length
2174 not being larger than 64 kB. */
2175 if (urb->transfer_buffer_length > 0xffff) {
2176 panic("urb->transfer_buffer_length > 0xffff");
2177 }
2178
2179 sb_desc->sw_len = urb->transfer_buffer_length;
2180
2181 /* The rem field is don't care if it's not a full-length transfer, so setting
2182 it shouldn't hurt. Also, rem isn't used for OUT traffic. */
2183 sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
2184 IO_STATE(USB_SB_command, tt, out) |
2185 IO_STATE(USB_SB_command, eot, yes) |
2186 IO_STATE(USB_SB_command, eol, yes));
2187
2188 /* The full field is set to yes, even if we don't actually check that this is
2189 a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0).
2190 Setting full prevents the USB controller from sending an empty packet in
2191 that case. However, if URB_ZERO_PACKET was set we want that. */
2192 if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
2193 sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
2194 }
2195
2196 sb_desc->buf = virt_to_phys(urb->transfer_buffer);
2197 sb_desc->next = 0;
2198
2199 } else if (usb_pipein(urb->pipe)) {
2200
2201 dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid);
2202
2203 sb_desc->sw_len = urb->transfer_buffer_length ?
2204 (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
2205
2206 /* The rem field is don't care if it's not a full-length transfer, so setting
2207 it shouldn't hurt. */
2208 sb_desc->command =
2209 (IO_FIELD(USB_SB_command, rem,
2210 urb->transfer_buffer_length % maxlen) |
2211 IO_STATE(USB_SB_command, tt, in) |
2212 IO_STATE(USB_SB_command, eot, yes) |
2213 IO_STATE(USB_SB_command, eol, yes));
2214
2215 sb_desc->buf = 0;
2216 sb_desc->next = 0;
2217 }
2218
2219 urb_priv->first_sb = sb_desc;
2220 urb_priv->last_sb = sb_desc;
2221 urb_priv->epid = epid;
2222
2223 urb->hcpriv = urb_priv;
2224
2225 /* Reset toggle bits and reset error count. */
2226 save_flags(flags);
2227 cli();
2228
2229 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
2230 nop();
2231
2232 /* FIXME: Is this a special case since the hold field is checked,
2233 or should we check hold in a lot of other cases as well? */
2234 if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
2235 panic("Hold was set in %s", __FUNCTION__);
2236 }
2237
2238 /* Reset error counters (regardless of which direction this traffic is). */
2239 *R_USB_EPT_DATA &=
2240 ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
2241 IO_MASK(R_USB_EPT_DATA, error_count_out));
2242
2243 /* Software must preset the toggle bits. */
2244 if (usb_pipeout(urb->pipe)) {
2245 char toggle =
2246 usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
2247 *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
2248 *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
2249 } else {
2250 char toggle =
2251 usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
2252 *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
2253 *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
2254 }
2255
2256 /* Assert that the EP descriptor is disabled. */
2257 assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
2258
2259 /* The reason we set the EP's sub pointer directly instead of
2260 walking the SB list and linking it last in the list is that we only
2261 have one active urb at a time (the rest are queued). */
2262
2263 /* Note that we cannot have interrupts running when we have set the SB descriptor
2264 but the EP is not yet enabled. If a bulk eot happens for another EP, we will
2265 find this EP disabled and with a SB != 0, which will make us think that it's done. */
2266 TxBulkEPList[epid].sub = virt_to_phys(sb_desc);
2267 TxBulkEPList[epid].hw_len = 0;
2268 /* Note that we don't have to fill in the ep_id field since this
2269 was done when we allocated the EP descriptors in init_tx_bulk_ep. */
2270
2271 /* Check if the dummy list is already with us (if several urbs were queued). */
2272 if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) {
2273
2274 dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d",
2275 (unsigned long)urb, epid);
2276
2277 /* The last EP in the dummy list already has its next pointer set to
2278 TxBulkEPList[epid].next. */
2279
2280 /* We don't need to check if the DMA is at this EP or not before changing the
2281 next pointer, since we will do it in one 32-bit write (EP descriptors are
2282 32-bit aligned). */
2283 TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
2284 }
2285 /* Enable the EP descr. */
2286 dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid);
2287 TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
2288
2289 /* Everything is set up, safe to enable interrupts again. */
2290 restore_flags(flags);
2291
2292 /* If the DMA bulk channel isn't running, we need to restart it if it
2293 has stopped at the last EP descriptor (DMA stopped because there was
2294 no more traffic) or if it has stopped at a dummy EP with the intr flag
2295 set (DMA stopped because we were too slow in inserting new traffic). */
2296 if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
2297
2298 USB_EP_Desc_t *ep;
2299 ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
2300 dbg_bulk("DMA channel not running in add");
2301 dbg_bulk("DMA is at 0x%lx", (unsigned long)ep);
2302
2303 if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) ||
2304 (ep->command & 0x8) >> 3) {
2305 *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
2306 /* Update/restart the bulk start timer since we just started the channel. */
2307 mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
2308 /* Update/restart the bulk eot timer since we just inserted traffic. */
2309 mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
2310 }
2311 }
2312
2313 DBFEXIT;
2314}
2315
2316static void etrax_usb_complete_bulk_urb(struct urb *urb, int status)
2317{
2318 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2319 int epid = urb_priv->epid;
2320 unsigned long flags;
2321
2322 DBFENTER;
2323
2324 if (status)
2325 warn("Completing bulk urb with status %d.", status);
2326
2327 dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid);
2328
2329 /* Update the urb list. */
2330 urb_list_del(urb, epid);
2331
2332 /* For an IN pipe, we always set the actual length, regardless of whether there was
2333 an error or not (which means the device driver can use the data if it wants to). */
2334 if (usb_pipein(urb->pipe)) {
2335 urb->actual_length = urb_priv->rx_offset;
2336 } else {
2337 /* Set actual_length for OUT urbs also; the USB mass storage driver seems
2338 to want that. We wouldn't know of any partial writes if there was an error. */
2339 if (status == 0) {
2340 urb->actual_length = urb->transfer_buffer_length;
2341 } else {
2342 urb->actual_length = 0;
2343 }
2344 }
2345
2346 /* FIXME: Is there something of the things below we shouldn't do if there was an error?
2347 Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */
2348
2349 save_flags(flags);
2350 cli();
2351
2352 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
2353 nop();
2354
2355 /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */
2356 if (usb_pipeout(urb->pipe)) {
2357 char toggle =
2358 IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
2359 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
2360 usb_pipeout(urb->pipe), toggle);
2361 } else {
2362 char toggle =
2363 IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
2364 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
2365 usb_pipeout(urb->pipe), toggle);
2366 }
2367 restore_flags(flags);
2368
2369 /* Remember to free the SBs. */
2370 etrax_remove_from_sb_list(urb);
2371 kfree(urb_priv);
2372 urb->hcpriv = 0;
2373
2374 /* If there are any more urb's in the list we'd better start sending */
2375 if (!urb_list_empty(epid)) {
2376
2377 struct urb *new_urb;
2378
2379 /* Get the first urb. */
2380 new_urb = urb_list_first(epid);
2381 assert(new_urb);
2382
2383 dbg_bulk("More bulk for epid %d", epid);
2384
2385 etrax_usb_add_to_bulk_sb_list(new_urb, epid);
2386 }
2387
2388 urb->status = status;
2389
2390 /* We let any non-zero status from the layer above have precedence. */
2391 if (status == 0) {
2392 /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
2393 is to be treated as an error. */
2394 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
2395 if (usb_pipein(urb->pipe) &&
2396 (urb->actual_length !=
2397 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
2398 urb->status = -EREMOTEIO;
2399 }
2400 }
2401 }
2402
2403 if (urb->complete) {
2404 urb->complete(urb, NULL);
2405 }
2406
2407 if (urb_list_empty(epid)) {
2408 /* This means that this EP is now free, deconfigure it. */
2409 etrax_usb_free_epid(epid);
2410
2411 /* No more traffic; time to clean up.
2412 Must set sub pointer to 0, since we look at the sub pointer when handling
2413 the bulk eot interrupt. */
2414
2415 dbg_bulk("No bulk for epid %d", epid);
2416
2417 TxBulkEPList[epid].sub = 0;
2418
2419 /* Unlink the dummy list. */
2420
2421 dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d",
2422 (unsigned long)urb, epid);
2423
2424 /* No need to wait for the DMA before changing the next pointer.
2425 The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
2426 the last one (INVALID_EPID) for actual traffic. */
2427 TxBulkEPList[epid].next =
2428 virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
2429 }
2430
2431 DBFEXIT;
2432}
2433
2434static int etrax_usb_submit_ctrl_urb(struct urb *urb)
2435{
2436 int epid;
2437 int empty;
2438 unsigned long flags;
2439 etrax_urb_priv_t *urb_priv;
2440
2441 DBFENTER;
2442
2443 /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */
2444
2445 /* Epid allocation, empty check and list add must be protected.
2446
2447 Epid allocation because if we find an existing epid for this endpoint an urb might be
2448 completed (emptying the list) before we add the new urb to the list, causing the epid
2449 to be de-allocated. We would then start the transfer with an invalid epid -> epid attn.
2450
2451 Empty check and add because otherwise we might conclude that the list is not empty,
2452 after which it becomes empty before we add the new urb to the list, causing us not to
2453 insert the new traffic into the SB list. */
2454
2455 spin_lock_irqsave(&urb_list_lock, flags);
2456 epid = etrax_usb_setup_epid(urb);
2457 if (epid == -1) {
2458 spin_unlock_irqrestore(&urb_list_lock, flags);
2459 DBFEXIT;
2460 return -ENOMEM;
2461 }
2462 empty = urb_list_empty(epid);
2463 urb_list_add(urb, epid);
2464 spin_unlock_irqrestore(&urb_list_lock, flags);
2465
2466 dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d",
2467 (unsigned long)urb, empty ? "empty" : "", epid);
2468
2469 /* Mark the urb as being in progress. */
2470 urb->status = -EINPROGRESS;
2471
2472 /* Setup the hcpriv data. */
2473 urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
2474 assert(urb_priv != NULL);
2475 /* This sets rx_offset to 0. */
2476 urb_priv->urb_state = NOT_STARTED;
2477 urb->hcpriv = urb_priv;
2478
2479 if (empty) {
2480 etrax_usb_add_to_ctrl_sb_list(urb, epid);
2481 }
2482
2483 DBFEXIT;
2484
2485 return 0;
2486}
2487
2488static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid)
2489{
2490 USB_SB_Desc_t *sb_desc_setup;
2491 USB_SB_Desc_t *sb_desc_data;
2492 USB_SB_Desc_t *sb_desc_status;
2493
2494 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2495
2496 unsigned long flags;
2497 char maxlen;
2498
2499 DBFENTER;
2500
2501 maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
2502
2503 sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2504 assert(sb_desc_setup != NULL);
2505 sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2506 assert(sb_desc_status != NULL);
2507
2508 /* Initialize the mandatory setup SB descriptor (used only in control transfers) */
2509 sb_desc_setup->sw_len = 8;
2510 sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) |
2511 IO_STATE(USB_SB_command, tt, setup) |
2512 IO_STATE(USB_SB_command, full, yes) |
2513 IO_STATE(USB_SB_command, eot, yes));
2514
2515 sb_desc_setup->buf = virt_to_phys(urb->setup_packet);
2516
2517 if (usb_pipeout(urb->pipe)) {
2518 dbg_ctrl("Transfer for epid %d is OUT", epid);
2519
2520 /* If this Control OUT transfer has an optional data stage we add an OUT token
2521 before the mandatory IN (status) token, hence the reordered SB list */
2522
2523 sb_desc_setup->next = virt_to_phys(sb_desc_status);
2524 if (urb->transfer_buffer) {
2525
2526 dbg_ctrl("This OUT transfer has an extra data stage");
2527
2528 sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2529 assert(sb_desc_data != NULL);
2530
2531 sb_desc_setup->next = virt_to_phys(sb_desc_data);
2532
2533 sb_desc_data->sw_len = urb->transfer_buffer_length;
2534 sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) |
2535 IO_STATE(USB_SB_command, full, yes) |
2536 IO_STATE(USB_SB_command, eot, yes));
2537 sb_desc_data->buf = virt_to_phys(urb->transfer_buffer);
2538 sb_desc_data->next = virt_to_phys(sb_desc_status);
2539 }
2540
2541 sb_desc_status->sw_len = 1;
2542 sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
2543 IO_STATE(USB_SB_command, tt, in) |
2544 IO_STATE(USB_SB_command, eot, yes) |
2545 IO_STATE(USB_SB_command, intr, yes) |
2546 IO_STATE(USB_SB_command, eol, yes));
2547
2548 sb_desc_status->buf = 0;
2549 sb_desc_status->next = 0;
2550
2551 } else if (usb_pipein(urb->pipe)) {
2552
2553 dbg_ctrl("Transfer for epid %d is IN", epid);
2554 dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length);
2555 dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen);
2556
2557 sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2558 assert(sb_desc_data != NULL);
2559
2560 sb_desc_setup->next = virt_to_phys(sb_desc_data);
2561
2562 sb_desc_data->sw_len = urb->transfer_buffer_length ?
2563 (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
2564 dbg_ctrl("sw_len got %d", sb_desc_data->sw_len);
2565
2566 sb_desc_data->command =
2567 (IO_FIELD(USB_SB_command, rem,
2568 urb->transfer_buffer_length % maxlen) |
2569 IO_STATE(USB_SB_command, tt, in) |
2570 IO_STATE(USB_SB_command, eot, yes));
2571
2572 sb_desc_data->buf = 0;
2573 sb_desc_data->next = virt_to_phys(sb_desc_status);
2574
2575 /* Read comment at zout_buffer declaration for an explanation to this. */
2576 sb_desc_status->sw_len = 1;
2577 sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
2578 IO_STATE(USB_SB_command, tt, zout) |
2579 IO_STATE(USB_SB_command, full, yes) |
2580 IO_STATE(USB_SB_command, eot, yes) |
2581 IO_STATE(USB_SB_command, intr, yes) |
2582 IO_STATE(USB_SB_command, eol, yes));
2583
2584 sb_desc_status->buf = virt_to_phys(&zout_buffer[0]);
2585 sb_desc_status->next = 0;
2586 }
2587
2588 urb_priv->first_sb = sb_desc_setup;
2589 urb_priv->last_sb = sb_desc_status;
2590 urb_priv->epid = epid;
2591
2592 urb_priv->urb_state = STARTED;
2593
2594 /* Reset toggle bits and reset error count, remember to di and ei */
2595 /* Warning: it is possible that this locking doesn't work with bottom-halves */
2596
2597 save_flags(flags);
2598 cli();
2599
2600 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
2601 nop();
2602 if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
2603 panic("Hold was set in %s", __FUNCTION__);
2604 }
2605
2606
2607 /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits
2608 are set to a specific value. Why the difference? Read "Transfer and Toggle Bits
2609 in Designer's Reference, p. 8 - 11. */
2610 *R_USB_EPT_DATA &=
2611 ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
2612 IO_MASK(R_USB_EPT_DATA, error_count_out) |
2613 IO_MASK(R_USB_EPT_DATA, t_in) |
2614 IO_MASK(R_USB_EPT_DATA, t_out));
2615
2616 /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now
2617 (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */
2618 restore_flags(flags);
2619
2620 /* Assert that the EP descriptor is disabled. */
2621 assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
2622
2623 /* Set up and enable the EP descriptor. */
2624 TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup);
2625 TxCtrlEPList[epid].hw_len = 0;
2626 TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
2627
2628 /* We start the DMA sub channel without checking if it's running or not, because:
2629 1) If it's already running, issuing the start command is a nop.
2630 2) We avoid a test-and-set race condition. */
2631 *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
2632
2633 DBFEXIT;
2634}
2635
2636static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status)
2637{
2638 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2639 int epid = urb_priv->epid;
2640
2641 DBFENTER;
2642
2643 if (status)
2644 warn("Completing ctrl urb with status %d.", status);
2645
2646 dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb);
2647
2648 /* Remove this urb from the list. */
2649 urb_list_del(urb, epid);
2650
2651 /* For an IN pipe, we always set the actual length, regardless of whether there was
2652 an error or not (which means the device driver can use the data if it wants to). */
2653 if (usb_pipein(urb->pipe)) {
2654 urb->actual_length = urb_priv->rx_offset;
2655 }
2656
2657 /* FIXME: Is there something of the things below we shouldn't do if there was an error?
2658 Like, maybe we shouldn't insert more traffic. */
2659
2660 /* Remember to free the SBs. */
2661 etrax_remove_from_sb_list(urb);
2662 kfree(urb_priv);
2663 urb->hcpriv = 0;
2664
2665 /* If there are any more urbs in the list we'd better start sending. */
2666 if (!urb_list_empty(epid)) {
2667 struct urb *new_urb;
2668
2669 /* Get the first urb. */
2670 new_urb = urb_list_first(epid);
2671 assert(new_urb);
2672
2673 dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb);
2674
2675 etrax_usb_add_to_ctrl_sb_list(new_urb, epid);
2676 }
2677
2678 urb->status = status;
2679
2680 /* We let any non-zero status from the layer above have precedence. */
2681 if (status == 0) {
2682 /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
2683 is to be treated as an error. */
2684 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
2685 if (usb_pipein(urb->pipe) &&
2686 (urb->actual_length !=
2687 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
2688 urb->status = -EREMOTEIO;
2689 }
2690 }
2691 }
2692
2693 if (urb->complete) {
2694 urb->complete(urb, NULL);
2695 }
2696
2697 if (urb_list_empty(epid)) {
2698 /* No more traffic. Time to clean up. */
2699 etrax_usb_free_epid(epid);
2700 /* Must set sub pointer to 0. */
2701 dbg_ctrl("No ctrl for epid %d", epid);
2702 TxCtrlEPList[epid].sub = 0;
2703 }
2704
2705 DBFEXIT;
2706}
2707
2708static int etrax_usb_submit_intr_urb(struct urb *urb)
2709{
2710
2711 int epid;
2712
2713 DBFENTER;
2714
2715 if (usb_pipeout(urb->pipe)) {
2716 /* Unsupported transfer type.
2717 We don't support interrupt out traffic. (If we do, we can't support
2718 intervals for neither in or out traffic, but are forced to schedule all
2719 interrupt traffic in one frame.) */
2720 return -EINVAL;
2721 }
2722
2723 epid = etrax_usb_setup_epid(urb);
2724 if (epid == -1) {
2725 DBFEXIT;
2726 return -ENOMEM;
2727 }
2728
2729 if (!urb_list_empty(epid)) {
2730 /* There is already a queued urb for this endpoint. */
2731 etrax_usb_free_epid(epid);
2732 return -ENXIO;
2733 }
2734
2735 urb->status = -EINPROGRESS;
2736
2737 dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid);
2738
2739 urb_list_add(urb, epid);
2740 etrax_usb_add_to_intr_sb_list(urb, epid);
2741
2742 return 0;
2743
2744 DBFEXIT;
2745}
2746
2747static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid)
2748{
2749
2750 volatile USB_EP_Desc_t *tmp_ep;
2751 volatile USB_EP_Desc_t *first_ep;
2752
2753 char maxlen;
2754 int interval;
2755 int i;
2756
2757 etrax_urb_priv_t *urb_priv;
2758
2759 DBFENTER;
2760
2761 maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
2762 interval = urb->interval;
2763
2764 urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
2765 assert(urb_priv != NULL);
2766 urb->hcpriv = urb_priv;
2767
2768 first_ep = &TxIntrEPList[0];
2769
2770 /* Round of the interval to 2^n, it is obvious that this code favours
2771 smaller numbers, but that is actually a good thing */
2772 /* FIXME: The "rounding error" for larger intervals will be quite
2773 large. For in traffic this shouldn't be a problem since it will only
2774 mean that we "poll" more often. */
2775 for (i = 0; interval; i++) {
2776 interval = interval >> 1;
2777 }
2778 interval = 1 << (i - 1);
2779
2780 dbg_intr("Interval rounded to %d", interval);
2781
2782 tmp_ep = first_ep;
2783 i = 0;
2784 do {
2785 if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
2786 if ((i % interval) == 0) {
2787 /* Insert the traffic ep after tmp_ep */
2788 USB_EP_Desc_t *ep_desc;
2789 USB_SB_Desc_t *sb_desc;
2790
2791 dbg_intr("Inserting EP for epid %d", epid);
2792
2793 ep_desc = (USB_EP_Desc_t *)
2794 kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2795 sb_desc = (USB_SB_Desc_t *)
2796 kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
2797 assert(ep_desc != NULL);
2798 CHECK_ALIGN(ep_desc);
2799 assert(sb_desc != NULL);
2800
2801 ep_desc->sub = virt_to_phys(sb_desc);
2802 ep_desc->hw_len = 0;
2803 ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
2804 IO_STATE(USB_EP_command, enable, yes));
2805
2806
2807 /* Round upwards the number of packets of size maxlen
2808 that this SB descriptor should receive. */
2809 sb_desc->sw_len = urb->transfer_buffer_length ?
2810 (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
2811 sb_desc->next = 0;
2812 sb_desc->buf = 0;
2813 sb_desc->command =
2814 (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) |
2815 IO_STATE(USB_SB_command, tt, in) |
2816 IO_STATE(USB_SB_command, eot, yes) |
2817 IO_STATE(USB_SB_command, eol, yes));
2818
2819 ep_desc->next = tmp_ep->next;
2820 tmp_ep->next = virt_to_phys(ep_desc);
2821 }
2822 i++;
2823 }
2824 tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
2825 } while (tmp_ep != first_ep);
2826
2827
2828 /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */
2829 urb_priv->epid = epid;
2830
2831 /* We start the DMA sub channel without checking if it's running or not, because:
2832 1) If it's already running, issuing the start command is a nop.
2833 2) We avoid a test-and-set race condition. */
2834 *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
2835
2836 DBFEXIT;
2837}
2838
2839
2840
2841static void etrax_usb_complete_intr_urb(struct urb *urb, int status)
2842{
2843 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
2844 int epid = urb_priv->epid;
2845
2846 DBFENTER;
2847
2848 if (status)
2849 warn("Completing intr urb with status %d.", status);
2850
2851 dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb);
2852
2853 urb->status = status;
2854 urb->actual_length = urb_priv->rx_offset;
2855
2856 dbg_intr("interrupt urb->actual_length = %d", urb->actual_length);
2857
2858 /* We let any non-zero status from the layer above have precedence. */
2859 if (status == 0) {
2860 /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
2861 is to be treated as an error. */
2862 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
2863 if (urb->actual_length !=
2864 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
2865 urb->status = -EREMOTEIO;
2866 }
2867 }
2868 }
2869
2870 /* The driver will resubmit the URB so we need to remove it first */
2871 etrax_usb_unlink_urb(urb, 0);
2872 if (urb->complete) {
2873 urb->complete(urb, NULL);
2874 }
2875
2876 DBFEXIT;
2877}
2878
2879
2880static int etrax_usb_submit_isoc_urb(struct urb *urb)
2881{
2882 int epid;
2883 unsigned long flags;
2884
2885 DBFENTER;
2886
2887 dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb);
2888
2889 /* Epid allocation, empty check and list add must be protected.
2890 Read about this in etrax_usb_submit_ctrl_urb. */
2891
2892 spin_lock_irqsave(&urb_list_lock, flags);
2893 /* Is there an active epid for this urb ? */
2894 epid = etrax_usb_setup_epid(urb);
2895 if (epid == -1) {
2896 DBFEXIT;
2897 spin_unlock_irqrestore(&urb_list_lock, flags);
2898 return -ENOMEM;
2899 }
2900
2901 /* Ok, now we got valid endpoint, lets insert some traffic */
2902
2903 urb->status = -EINPROGRESS;
2904
2905 /* Find the last urb in the URB_List and add this urb after that one.
2906 Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This
2907 is important to make this in "real time" since isochronous traffic is
2908 time sensitive. */
2909
2910 dbg_isoc("Adding isoc urb to (possibly empty) list");
2911 urb_list_add(urb, epid);
2912 etrax_usb_add_to_isoc_sb_list(urb, epid);
2913 spin_unlock_irqrestore(&urb_list_lock, flags);
2914
2915 DBFEXIT;
2916
2917 return 0;
2918}
2919
2920static void etrax_usb_check_error_isoc_ep(const int epid)
2921{
2922 unsigned long int flags;
2923 int error_code;
2924 __u32 r_usb_ept_data;
2925
2926 /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof,
2927 bulk_eot and epid_attn interrupts. So we just check the status of
2928 the epid without testing if for it in R_USB_EPID_ATTN. */
2929
2930
2931 save_flags(flags);
2932 cli();
2933 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
2934 nop();
2935 /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
2936 registers, they are located at the same address and are of the same size.
2937 In other words, this read should be ok for isoc also. */
2938 r_usb_ept_data = *R_USB_EPT_DATA;
2939 restore_flags(flags);
2940
2941 error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
2942
2943 if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
2944 warn("Hold was set for epid %d.", epid);
2945 return;
2946 }
2947
2948 if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) {
2949
2950 /* This indicates that the SB list of the ept was completed before
2951 new data was appended to it. This is not an error, but indicates
2952 large system or USB load and could possibly cause trouble for
2953 very timing sensitive USB device drivers so we log it.
2954 */
2955 info("Isoc. epid %d disabled with no error", epid);
2956 return;
2957
2958 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) {
2959 /* Not really a protocol error, just says that the endpoint gave
2960 a stall response. Note that error_code cannot be stall for isoc. */
2961 panic("Isoc traffic cannot stall");
2962
2963 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) {
2964 /* Two devices responded to a transaction request. Must be resolved
2965 by software. FIXME: Reset ports? */
2966 panic("Bus error for epid %d."
2967 " Two devices responded to transaction request",
2968 epid);
2969
2970 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
2971 /* DMA overrun or underrun. */
2972 warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
2973
2974 /* It seems that error_code = buffer_error in
2975 R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
2976 are the same error. */
2977 }
2978}
2979
2980
2981static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid)
2982{
2983
2984 int i = 0;
2985
2986 etrax_urb_priv_t *urb_priv;
2987 USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc;
2988
2989 DBFENTER;
2990
2991 prev_sb_desc = next_sb_desc = temp_sb_desc = NULL;
2992
2993 urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
2994 assert(urb_priv != NULL);
2995
2996 urb->hcpriv = urb_priv;
2997 urb_priv->epid = epid;
2998
2999 if (usb_pipeout(urb->pipe)) {
3000
3001 if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n");
3002
3003 dbg_isoc("Transfer for epid %d is OUT", epid);
3004 dbg_isoc("%d packets in URB", urb->number_of_packets);
3005
3006 /* Create one SB descriptor for each packet and link them together. */
3007 for (i = 0; i < urb->number_of_packets; i++) {
3008 if (!urb->iso_frame_desc[i].length)
3009 continue;
3010
3011 next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
3012 assert(next_sb_desc != NULL);
3013
3014 if (urb->iso_frame_desc[i].length > 0) {
3015
3016 next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) |
3017 IO_STATE(USB_SB_command, eot, yes));
3018
3019 next_sb_desc->sw_len = urb->iso_frame_desc[i].length;
3020 next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset);
3021
3022 /* Check if full length transfer. */
3023 if (urb->iso_frame_desc[i].length ==
3024 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
3025 next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
3026 }
3027 } else {
3028 dbg_isoc("zero len packet");
3029 next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
3030 IO_STATE(USB_SB_command, tt, zout) |
3031 IO_STATE(USB_SB_command, eot, yes) |
3032 IO_STATE(USB_SB_command, full, yes));
3033
3034 next_sb_desc->sw_len = 1;
3035 next_sb_desc->buf = virt_to_phys(&zout_buffer[0]);
3036 }
3037
3038 /* First SB descriptor that belongs to this urb */
3039 if (i == 0)
3040 urb_priv->first_sb = next_sb_desc;
3041 else
3042 prev_sb_desc->next = virt_to_phys(next_sb_desc);
3043
3044 prev_sb_desc = next_sb_desc;
3045 }
3046
3047 next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) |
3048 IO_STATE(USB_SB_command, eol, yes));
3049 next_sb_desc->next = 0;
3050 urb_priv->last_sb = next_sb_desc;
3051
3052 } else if (usb_pipein(urb->pipe)) {
3053
3054 dbg_isoc("Transfer for epid %d is IN", epid);
3055 dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length);
3056 dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length);
3057
3058 /* Note that in descriptors for periodic traffic are not consumed. This means that
3059 the USB controller never propagates in the SB list. In other words, if there already
3060 is an SB descriptor in the list for this EP we don't have to do anything. */
3061 if (TxIsocEPList[epid].sub == 0) {
3062 dbg_isoc("Isoc traffic not already running, allocating SB");
3063
3064 next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
3065 assert(next_sb_desc != NULL);
3066
3067 next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) |
3068 IO_STATE(USB_SB_command, eot, yes) |
3069 IO_STATE(USB_SB_command, eol, yes));
3070
3071 next_sb_desc->next = 0;
3072 next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant
3073 for periodic in traffic as long as it is more
3074 than zero. Set to 1 always. */
3075 next_sb_desc->buf = 0;
3076
3077 /* The rem field is don't care for isoc traffic, so we don't set it. */
3078
3079 /* Only one SB descriptor that belongs to this urb. */
3080 urb_priv->first_sb = next_sb_desc;
3081 urb_priv->last_sb = next_sb_desc;
3082
3083 } else {
3084
3085 dbg_isoc("Isoc traffic already running, just setting first/last_sb");
3086
3087 /* Each EP for isoc in will have only one SB descriptor, setup when submitting the
3088 already active urb. Note that even though we may have several first_sb/last_sb
3089 pointing at the same SB descriptor, they are freed only once (when the list has
3090 become empty). */
3091 urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub);
3092 urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub);
3093 return;
3094 }
3095
3096 }
3097
3098 /* Find the spot to insert this urb and add it. */
3099 if (TxIsocEPList[epid].sub == 0) {
3100 /* First SB descriptor inserted in this list (in or out). */
3101 dbg_isoc("Inserting SB desc first in list");
3102 TxIsocEPList[epid].hw_len = 0;
3103 TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
3104
3105 } else {
3106 /* Isochronous traffic is already running, insert new traffic last (only out). */
3107 dbg_isoc("Inserting SB desc last in list");
3108 temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
3109 while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
3110 IO_STATE(USB_SB_command, eol, yes)) {
3111 assert(temp_sb_desc->next);
3112 temp_sb_desc = phys_to_virt(temp_sb_desc->next);
3113 }
3114 dbg_isoc("Appending list on desc 0x%p", temp_sb_desc);
3115
3116 /* Next pointer must be set before eol is removed. */
3117 temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
3118 /* Clear the previous end of list flag since there is a new in the
3119 added SB descriptor list. */
3120 temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
3121
3122 if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
3123 /* 8.8.5 in Designer's Reference says we should check for and correct
3124 any errors in the EP here. That should not be necessary if epid_attn
3125 is handled correctly, so we assume all is ok. */
3126 dbg_isoc("EP disabled");
3127 etrax_usb_check_error_isoc_ep(epid);
3128
3129 /* The SB list was exhausted. */
3130 if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
3131 /* The new sublist did not get processed before the EP was
3132 disabled. Setup the EP again. */
3133 dbg_isoc("Set EP sub to new list");
3134 TxIsocEPList[epid].hw_len = 0;
3135 TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
3136 }
3137 }
3138 }
3139
3140 if (urb->transfer_flags & URB_ISO_ASAP) {
3141 /* The isoc transfer should be started as soon as possible. The start_frame
3142 field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER
3143 with a USB Chief trace shows that the first isoc IN token is sent 2 frames
3144 later. I'm not sure how this affects usage of the start_frame field by the
3145 device driver, or how it affects things when USB_ISO_ASAP is not set, so
3146 therefore there's no compensation for the 2 frame "lag" here. */
3147 urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
3148 TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
3149 urb_priv->urb_state = STARTED;
3150 dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame);
3151 } else {
3152 /* Not started yet. */
3153 urb_priv->urb_state = NOT_STARTED;
3154 dbg_isoc("urb_priv->urb_state set to NOT_STARTED");
3155 }
3156
3157 /* We start the DMA sub channel without checking if it's running or not, because:
3158 1) If it's already running, issuing the start command is a nop.
3159 2) We avoid a test-and-set race condition. */
3160 *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
3161
3162 DBFEXIT;
3163}
3164
3165static void etrax_usb_complete_isoc_urb(struct urb *urb, int status)
3166{
3167 etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
3168 int epid = urb_priv->epid;
3169 int auto_resubmit = 0;
3170
3171 DBFENTER;
3172 dbg_isoc("complete urb 0x%p, status %d", urb, status);
3173
3174 if (status)
3175 warn("Completing isoc urb with status %d.", status);
3176
3177 if (usb_pipein(urb->pipe)) {
3178 int i;
3179
3180 /* Make that all isoc packets have status and length set before
3181 completing the urb. */
3182 for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) {
3183 urb->iso_frame_desc[i].actual_length = 0;
3184 urb->iso_frame_desc[i].status = -EPROTO;
3185 }
3186
3187 urb_list_del(urb, epid);
3188
3189 if (!list_empty(&urb_list[epid])) {
3190 ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
3191 } else {
3192 unsigned long int flags;
3193 if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
3194 /* The EP was enabled, disable it and wait. */
3195 TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
3196
3197 /* Ah, the luxury of busy-wait. */
3198 while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
3199 }
3200
3201 etrax_remove_from_sb_list(urb);
3202 TxIsocEPList[epid].sub = 0;
3203 TxIsocEPList[epid].hw_len = 0;
3204
3205 save_flags(flags);
3206 cli();
3207 etrax_usb_free_epid(epid);
3208 restore_flags(flags);
3209 }
3210
3211 urb->hcpriv = 0;
3212 kfree(urb_priv);
3213
3214 /* Release allocated bandwidth. */
3215 usb_release_bandwidth(urb->dev, urb, 0);
3216 } else if (usb_pipeout(urb->pipe)) {
3217 int freed_descr;
3218
3219 dbg_isoc("Isoc out urb complete 0x%p", urb);
3220
3221 /* Update the urb list. */
3222 urb_list_del(urb, epid);
3223
3224 freed_descr = etrax_remove_from_sb_list(urb);
3225 dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets);
3226 assert(freed_descr == urb->number_of_packets);
3227 urb->hcpriv = 0;
3228 kfree(urb_priv);
3229
3230 /* Release allocated bandwidth. */
3231 usb_release_bandwidth(urb->dev, urb, 0);
3232 }
3233
3234 urb->status = status;
3235 if (urb->complete) {
3236 urb->complete(urb, NULL);
3237 }
3238
3239 if (auto_resubmit) {
3240 /* Check that urb was not unlinked by the complete callback. */
3241 if (__urb_list_entry(urb, epid)) {
3242 /* Move this one down the list. */
3243 urb_list_move_last(urb, epid);
3244
3245 /* Mark the now first urb as started (may already be). */
3246 ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
3247
3248 /* Must set this to 0 since this urb is still active after
3249 completion. */
3250 urb_priv->isoc_packet_counter = 0;
3251 } else {
3252 warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb);
3253 }
3254 }
3255
3256 DBFEXIT;
3257}
3258
3259static void etrax_usb_complete_urb(struct urb *urb, int status)
3260{
3261 switch (usb_pipetype(urb->pipe)) {
3262 case PIPE_BULK:
3263 etrax_usb_complete_bulk_urb(urb, status);
3264 break;
3265 case PIPE_CONTROL:
3266 etrax_usb_complete_ctrl_urb(urb, status);
3267 break;
3268 case PIPE_INTERRUPT:
3269 etrax_usb_complete_intr_urb(urb, status);
3270 break;
3271 case PIPE_ISOCHRONOUS:
3272 etrax_usb_complete_isoc_urb(urb, status);
3273 break;
3274 default:
3275 err("Unknown pipetype");
3276 }
3277}
3278
3279
3280
3281static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc)
3282{
3283 usb_interrupt_registers_t *reg;
3284 unsigned long flags;
3285 __u32 irq_mask;
3286 __u8 status;
3287 __u32 epid_attn;
3288 __u16 port_status_1;
3289 __u16 port_status_2;
3290 __u32 fm_number;
3291
3292 DBFENTER;
3293
3294 /* Read critical registers into local variables, do kmalloc afterwards. */
3295 save_flags(flags);
3296 cli();
3297
3298 irq_mask = *R_USB_IRQ_MASK_READ;
3299 /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS
3300 must be read before R_USB_EPID_ATTN since reading the latter clears the
3301 ourun and perror fields of R_USB_STATUS. */
3302 status = *R_USB_STATUS;
3303
3304 /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */
3305 epid_attn = *R_USB_EPID_ATTN;
3306
3307 /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
3308 port_status interrupt. */
3309 port_status_1 = *R_USB_RH_PORT_STATUS_1;
3310 port_status_2 = *R_USB_RH_PORT_STATUS_2;
3311
3312 /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
3313 /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */
3314 fm_number = *R_USB_FM_NUMBER;
3315
3316 restore_flags(flags);
3317
3318 reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, GFP_ATOMIC);
3319
3320 assert(reg != NULL);
3321
3322 reg->hc = (etrax_hc_t *)vhc;
3323
3324 /* Now put register values into kmalloc'd area. */
3325 reg->r_usb_irq_mask_read = irq_mask;
3326 reg->r_usb_status = status;
3327 reg->r_usb_epid_attn = epid_attn;
3328 reg->r_usb_rh_port_status_1 = port_status_1;
3329 reg->r_usb_rh_port_status_2 = port_status_2;
3330 reg->r_usb_fm_number = fm_number;
3331
3332 INIT_WORK(&reg->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg);
3333 schedule_work(&reg->usb_bh);
3334
3335 DBFEXIT;
3336
3337 return IRQ_HANDLED;
3338}
3339
3340static void etrax_usb_hc_interrupt_bottom_half(void *data)
3341{
3342 usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data;
3343 __u32 irq_mask = reg->r_usb_irq_mask_read;
3344
3345 DBFENTER;
3346
3347 /* Interrupts are handled in order of priority. */
3348 if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
3349 etrax_usb_hc_epid_attn_interrupt(reg);
3350 }
3351 if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
3352 etrax_usb_hc_port_status_interrupt(reg);
3353 }
3354 if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
3355 etrax_usb_hc_ctl_status_interrupt(reg);
3356 }
3357 if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
3358 etrax_usb_hc_isoc_eof_interrupt();
3359 }
3360 if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
3361 /* Update/restart the bulk start timer since obviously the channel is running. */
3362 mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
3363 /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */
3364 mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
3365
3366 etrax_usb_hc_bulk_eot_interrupt(0);
3367 }
3368
3369 kmem_cache_free(top_half_reg_cache, reg);
3370
3371 DBFEXIT;
3372}
3373
3374
3375void etrax_usb_hc_isoc_eof_interrupt(void)
3376{
3377 struct urb *urb;
3378 etrax_urb_priv_t *urb_priv;
3379 int epid;
3380 unsigned long flags;
3381
3382 DBFENTER;
3383
3384 /* Do not check the invalid epid (it has a valid sub pointer). */
3385 for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
3386
3387 /* Do not check the invalid epid (it has a valid sub pointer). */
3388 if ((epid == DUMMY_EPID) || (epid == INVALID_EPID))
3389 continue;
3390
3391 /* Disable interrupts to block the isoc out descriptor interrupt handler
3392 from being called while the isoc EPID list is being checked.
3393 */
3394 save_flags(flags);
3395 cli();
3396
3397 if (TxIsocEPList[epid].sub == 0) {
3398 /* Nothing here to see. */
3399 restore_flags(flags);
3400 continue;
3401 }
3402
3403 /* Get the first urb (if any). */
3404 urb = urb_list_first(epid);
3405 if (urb == 0) {
3406 warn("Ignoring NULL urb");
3407 restore_flags(flags);
3408 continue;
3409 }
3410 if (usb_pipein(urb->pipe)) {
3411
3412 /* Sanity check. */
3413 assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
3414
3415 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
3416 assert(urb_priv);
3417
3418 if (urb_priv->urb_state == NOT_STARTED) {
3419
3420 /* If ASAP is not set and urb->start_frame is the current frame,
3421 start the transfer. */
3422 if (!(urb->transfer_flags & URB_ISO_ASAP) &&
3423 (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
3424
3425 dbg_isoc("Enabling isoc IN EP descr for epid %d", epid);
3426 TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
3427
3428 /* This urb is now active. */
3429 urb_priv->urb_state = STARTED;
3430 continue;
3431 }
3432 }
3433 }
3434 restore_flags(flags);
3435 }
3436
3437 DBFEXIT;
3438
3439}
3440
3441void etrax_usb_hc_bulk_eot_interrupt(int timer_induced)
3442{
3443 int epid;
3444
3445 /* The technique is to run one urb at a time, wait for the eot interrupt at which
3446 point the EP descriptor has been disabled. */
3447
3448 DBFENTER;
3449 dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : "");
3450
3451 for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
3452
3453 if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
3454 (TxBulkEPList[epid].sub != 0)) {
3455
3456 struct urb *urb;
3457 etrax_urb_priv_t *urb_priv;
3458 unsigned long flags;
3459 __u32 r_usb_ept_data;
3460
3461 /* Found a disabled EP descriptor which has a non-null sub pointer.
3462 Verify that this ctrl EP descriptor got disabled no errors.
3463 FIXME: Necessary to check error_code? */
3464 dbg_bulk("for epid %d?", epid);
3465
3466 /* Get the first urb. */
3467 urb = urb_list_first(epid);
3468
3469 /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of
3470 wrong unlinking? */
3471 if (!urb) {
3472 warn("NULL urb for epid %d", epid);
3473 continue;
3474 }
3475
3476 assert(urb);
3477 urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
3478 assert(urb_priv);
3479
3480 /* Sanity checks. */
3481 assert(usb_pipetype(urb->pipe) == PIPE_BULK);
3482 if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
3483 err("bulk endpoint got disabled before reaching last sb");
3484 }
3485
3486 /* For bulk IN traffic, there seems to be a race condition between
3487 between the bulk eot and eop interrupts, or rather an uncertainty regarding
3488 the order in which they happen. Normally we expect the eop interrupt from
3489 DMA channel 9 to happen before the eot interrupt.
3490
3491 Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */
3492
3493 if (usb_pipein(urb->pipe)) {
3494 dbg_bulk("in urb, continuing");
3495 continue;
3496 }
3497
3498 save_flags(flags);
3499 cli();
3500 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
3501 nop();
3502 r_usb_ept_data = *R_USB_EPT_DATA;
3503 restore_flags(flags);
3504
3505 if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) ==
3506 IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
3507 /* This means that the endpoint has no error, is disabled
3508 and had inserted traffic, i.e. transfer successfully completed. */
3509 etrax_usb_complete_bulk_urb(urb, 0);
3510 } else {
3511 /* Shouldn't happen. We expect errors to be caught by epid attention. */
3512 err("Found disabled bulk EP desc, error_code != no_error");
3513 }
3514 }
3515 }
3516
3517 /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer.
3518 However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may
3519 not. Also, we might find two disabled EPs when handling an eot interrupt, and then find
3520 none the next time. */
3521
3522 DBFEXIT;
3523
3524}
3525
3526void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg)
3527{
3528 /* This function handles the epid attention interrupt. There are a variety of reasons
3529 for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details):
3530
3531 invalid ep_id - Invalid epid in an EP (EP disabled).
3532 stall - Not strictly an error condition (EP disabled).
3533 3rd error - Three successive transaction errors (EP disabled).
3534 buffer ourun - Buffer overrun or underrun (EP disabled).
3535 past eof1 - Intr or isoc transaction proceeds past EOF1.
3536 near eof - Intr or isoc transaction would not fit inside the frame.
3537 zout transfer - If zout transfer for a bulk endpoint (EP disabled).
3538 setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */
3539
3540 int epid;
3541
3542
3543 DBFENTER;
3544
3545 assert(reg != NULL);
3546
3547 /* Note that we loop through all epids. We still want to catch errors for
3548 the invalid one, even though we might handle them differently. */
3549 for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
3550
3551 if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
3552
3553 struct urb *urb;
3554 __u32 r_usb_ept_data;
3555 unsigned long flags;
3556 int error_code;
3557
3558 save_flags(flags);
3559 cli();
3560 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
3561 nop();
3562 /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
3563 registers, they are located at the same address and are of the same size.
3564 In other words, this read should be ok for isoc also. */
3565 r_usb_ept_data = *R_USB_EPT_DATA;
3566 restore_flags(flags);
3567
3568 /* First some sanity checks. */
3569 if (epid == INVALID_EPID) {
3570 /* FIXME: What if it became disabled? Could seriously hurt interrupt
3571 traffic. (Use do_intr_recover.) */
3572 warn("Got epid_attn for INVALID_EPID (%d).", epid);
3573 err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
3574 err("R_USB_STATUS = 0x%x", reg->r_usb_status);
3575 continue;
3576 } else if (epid == DUMMY_EPID) {
3577 /* We definitely don't care about these ones. Besides, they are
3578 always disabled, so any possible disabling caused by the
3579 epid attention interrupt is irrelevant. */
3580 warn("Got epid_attn for DUMMY_EPID (%d).", epid);
3581 continue;
3582 }
3583
3584 /* Get the first urb in the urb list for this epid. We blatantly assume
3585 that only the first urb could have caused the epid attention.
3586 (For bulk and ctrl, only one urb is active at any one time. For intr
3587 and isoc we remove them once they are completed.) */
3588 urb = urb_list_first(epid);
3589
3590 if (urb == NULL) {
3591 err("Got epid_attn for epid %i with no urb.", epid);
3592 err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
3593 err("R_USB_STATUS = 0x%x", reg->r_usb_status);
3594 continue;
3595 }
3596
3597 switch (usb_pipetype(urb->pipe)) {
3598 case PIPE_BULK:
3599 warn("Got epid attn for bulk endpoint, epid %d", epid);
3600 break;
3601 case PIPE_CONTROL:
3602 warn("Got epid attn for control endpoint, epid %d", epid);
3603 break;
3604 case PIPE_INTERRUPT:
3605 warn("Got epid attn for interrupt endpoint, epid %d", epid);
3606 break;
3607 case PIPE_ISOCHRONOUS:
3608 warn("Got epid attn for isochronous endpoint, epid %d", epid);
3609 break;
3610 }
3611
3612 if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
3613 if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
3614 warn("Hold was set for epid %d.", epid);
3615 continue;
3616 }
3617 }
3618
3619 /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and
3620 R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */
3621 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
3622 error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
3623 } else {
3624 error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data);
3625 }
3626
3627 /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
3628 if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
3629
3630 /* Isoc traffic doesn't have error_count_in/error_count_out. */
3631 if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
3632 (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 ||
3633 IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) {
3634 /* 3rd error. */
3635 warn("3rd error for epid %i", epid);
3636 etrax_usb_complete_urb(urb, -EPROTO);
3637
3638 } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
3639
3640 warn("Perror for epid %d", epid);
3641
3642 if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
3643 /* invalid ep_id */
3644 panic("Perror because of invalid epid."
3645 " Deconfigured too early?");
3646 } else {
3647 /* past eof1, near eof, zout transfer, setup transfer */
3648
3649 /* Dump the urb and the relevant EP descriptor list. */
3650
3651 __dump_urb(urb);
3652 __dump_ept_data(epid);
3653 __dump_ep_list(usb_pipetype(urb->pipe));
3654
3655 panic("Something wrong with DMA descriptor contents."
3656 " Too much traffic inserted?");
3657 }
3658 } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
3659 /* buffer ourun */
3660 panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
3661 }
3662
3663 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) {
3664 /* Not really a protocol error, just says that the endpoint gave
3665 a stall response. Note that error_code cannot be stall for isoc. */
3666 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
3667 panic("Isoc traffic cannot stall");
3668 }
3669
3670 warn("Stall for epid %d", epid);
3671 etrax_usb_complete_urb(urb, -EPIPE);
3672
3673 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) {
3674 /* Two devices responded to a transaction request. Must be resolved
3675 by software. FIXME: Reset ports? */
3676 panic("Bus error for epid %d."
3677 " Two devices responded to transaction request",
3678 epid);
3679
3680 } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
3681 /* DMA overrun or underrun. */
3682 warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
3683
3684 /* It seems that error_code = buffer_error in
3685 R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
3686 are the same error. */
3687 etrax_usb_complete_urb(urb, -EPROTO);
3688 }
3689 }
3690 }
3691
3692 DBFEXIT;
3693
3694}
3695
3696void etrax_usb_bulk_start_timer_func(unsigned long dummy)
3697{
3698
3699 /* We might enable an EP descriptor behind the current DMA position when it's about
3700 to decide that there are no more bulk traffic and it should stop the bulk channel.
3701 Therefore we periodically check if the bulk channel is stopped and there is an
3702 enabled bulk EP descriptor, in which case we start the bulk channel. */
3703 dbg_bulk("bulk_start_timer timed out.");
3704
3705 if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
3706 int epid;
3707
3708 dbg_bulk("Bulk DMA channel not running.");
3709
3710 for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
3711 if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
3712 dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n",
3713 epid);
3714 *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
3715
3716 /* Restart the bulk eot timer since we just started the bulk channel. */
3717 mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
3718
3719 /* No need to search any further. */
3720 break;
3721 }
3722 }
3723 } else {
3724 dbg_bulk("Bulk DMA channel running.");
3725 }
3726}
3727
3728void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg)
3729{
3730 etrax_hc_t *hc = reg->hc;
3731 __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1;
3732 __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2;
3733
3734 DBFENTER;
3735
3736 /* The Etrax RH does not include a wPortChange register, so this has to be handled in software
3737 (by saving the old port status value for comparison when the port status interrupt happens).
3738 See section 11.16.2.6.2 in the USB 1.1 spec for details. */
3739
3740 dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1);
3741 dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2);
3742 dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1);
3743 dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2);
3744
3745 /* C_PORT_CONNECTION is set on any transition. */
3746 hc->rh.wPortChange_1 |=
3747 ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) !=
3748 (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ?
3749 (1 << RH_PORT_CONNECTION) : 0;
3750
3751 hc->rh.wPortChange_2 |=
3752 ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) !=
3753 (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ?
3754 (1 << RH_PORT_CONNECTION) : 0;
3755
3756 /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when
3757 the port is disabled, not when it's enabled. */
3758 hc->rh.wPortChange_1 |=
3759 ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE))
3760 && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ?
3761 (1 << RH_PORT_ENABLE) : 0;
3762
3763 hc->rh.wPortChange_2 |=
3764 ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE))
3765 && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ?
3766 (1 << RH_PORT_ENABLE) : 0;
3767
3768 /* C_PORT_SUSPEND is set to one when the device has transitioned out
3769 of the suspended state, i.e. when suspend goes from one to zero. */
3770 hc->rh.wPortChange_1 |=
3771 ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND))
3772 && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ?
3773 (1 << RH_PORT_SUSPEND) : 0;
3774
3775 hc->rh.wPortChange_2 |=
3776 ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND))
3777 && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ?
3778 (1 << RH_PORT_SUSPEND) : 0;
3779
3780
3781 /* C_PORT_RESET is set when reset processing on this port is complete. */
3782 hc->rh.wPortChange_1 |=
3783 ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET))
3784 && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ?
3785 (1 << RH_PORT_RESET) : 0;
3786
3787 hc->rh.wPortChange_2 |=
3788 ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET))
3789 && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ?
3790 (1 << RH_PORT_RESET) : 0;
3791
3792 /* Save the new values for next port status change. */
3793 hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1;
3794 hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2;
3795
3796 dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1);
3797 dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2);
3798
3799 DBFEXIT;
3800
3801}
3802
3803void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg)
3804{
3805 DBFENTER;
3806
3807 /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
3808 list for the corresponding epid? */
3809 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
3810 panic("USB controller got ourun.");
3811 }
3812 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
3813
3814 /* Before, etrax_usb_do_intr_recover was called on this epid if it was
3815 an interrupt pipe. I don't see how re-enabling all EP descriptors
3816 will help if there was a programming error. */
3817 panic("USB controller got perror.");
3818 }
3819
3820 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
3821 /* We should never operate in device mode. */
3822 panic("USB controller in device mode.");
3823 }
3824
3825 /* These if-statements could probably be nested. */
3826 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) {
3827 info("USB controller in host mode.");
3828 }
3829 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) {
3830 info("USB controller started.");
3831 }
3832 if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) {
3833 info("USB controller running.");
3834 }
3835
3836 DBFEXIT;
3837
3838}
3839
3840
3841static int etrax_rh_submit_urb(struct urb *urb)
3842{
3843 struct usb_device *usb_dev = urb->dev;
3844 etrax_hc_t *hc = usb_dev->bus->hcpriv;
3845 unsigned int pipe = urb->pipe;
3846 struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
3847 void *data = urb->transfer_buffer;
3848 int leni = urb->transfer_buffer_length;
3849 int len = 0;
3850 int stat = 0;
3851
3852 __u16 bmRType_bReq;
3853 __u16 wValue;
3854 __u16 wIndex;
3855 __u16 wLength;
3856
3857 DBFENTER;
3858
3859 /* FIXME: What is this interrupt urb that is sent to the root hub? */
3860 if (usb_pipetype (pipe) == PIPE_INTERRUPT) {
3861 dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval);
3862 hc->rh.urb = urb;
3863 hc->rh.send = 1;
3864 /* FIXME: We could probably remove this line since it's done
3865 in etrax_rh_init_int_timer. (Don't remove it from
3866 etrax_rh_init_int_timer though.) */
3867 hc->rh.interval = urb->interval;
3868 etrax_rh_init_int_timer(urb);
3869 DBFEXIT;
3870
3871 return 0;
3872 }
3873
3874 bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8);
3875 wValue = le16_to_cpu(cmd->wValue);
3876 wIndex = le16_to_cpu(cmd->wIndex);
3877 wLength = le16_to_cpu(cmd->wLength);
3878
3879 dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq);
3880 dbg_rh("wValue : 0x%04x (%d)", wValue, wValue);
3881 dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex);
3882 dbg_rh("wLength : 0x%04x (%d)", wLength, wLength);
3883
3884 switch (bmRType_bReq) {
3885
3886 /* Request Destination:
3887 without flags: Device,
3888 RH_INTERFACE: interface,
3889 RH_ENDPOINT: endpoint,
3890 RH_CLASS means HUB here,
3891 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
3892 */
3893
3894 case RH_GET_STATUS:
3895 *(__u16 *) data = cpu_to_le16 (1);
3896 OK (2);
3897
3898 case RH_GET_STATUS | RH_INTERFACE:
3899 *(__u16 *) data = cpu_to_le16 (0);
3900 OK (2);
3901
3902 case RH_GET_STATUS | RH_ENDPOINT:
3903 *(__u16 *) data = cpu_to_le16 (0);
3904 OK (2);
3905
3906 case RH_GET_STATUS | RH_CLASS:
3907 *(__u32 *) data = cpu_to_le32 (0);
3908 OK (4); /* hub power ** */
3909
3910 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
3911 if (wIndex == 1) {
3912 *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1);
3913 *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1);
3914 } else if (wIndex == 2) {
3915 *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2);
3916 *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2);
3917 } else {
3918 dbg_rh("RH_GET_STATUS whith invalid wIndex!");
3919 OK(0);
3920 }
3921
3922 OK(4);
3923
3924 case RH_CLEAR_FEATURE | RH_ENDPOINT:
3925 switch (wValue) {
3926 case (RH_ENDPOINT_STALL):
3927 OK (0);
3928 }
3929 break;
3930
3931 case RH_CLEAR_FEATURE | RH_CLASS:
3932 switch (wValue) {
3933 case (RH_C_HUB_OVER_CURRENT):
3934 OK (0); /* hub power over current ** */
3935 }
3936 break;
3937
3938 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
3939 switch (wValue) {
3940 case (RH_PORT_ENABLE):
3941 if (wIndex == 1) {
3942
3943 dbg_rh("trying to do disable port 1");
3944
3945 *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
3946
3947 while (hc->rh.prev_wPortStatus_1 &
3948 IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes));
3949 *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
3950 dbg_rh("Port 1 is disabled");
3951
3952 } else if (wIndex == 2) {
3953
3954 dbg_rh("trying to do disable port 2");
3955
3956 *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
3957
3958 while (hc->rh.prev_wPortStatus_2 &
3959 IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes));
3960 *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
3961 dbg_rh("Port 2 is disabled");
3962
3963 } else {
3964 dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE "
3965 "with invalid wIndex == %d!", wIndex);
3966 }
3967
3968 OK (0);
3969 case (RH_PORT_SUSPEND):
3970 /* Opposite to suspend should be resume, so we'll do a resume. */
3971 /* FIXME: USB 1.1, 11.16.2.2 says:
3972 "Clearing the PORT_SUSPEND feature causes a host-initiated resume
3973 on the specified port. If the port is not in the Suspended state,
3974 the hub should treat this request as a functional no-operation."
3975 Shouldn't we check if the port is in a suspended state before
3976 resuming? */
3977
3978 /* Make sure the controller isn't busy. */
3979 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
3980
3981 if (wIndex == 1) {
3982 *R_USB_COMMAND =
3983 IO_STATE(R_USB_COMMAND, port_sel, port1) |
3984 IO_STATE(R_USB_COMMAND, port_cmd, resume) |
3985 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
3986 } else if (wIndex == 2) {
3987 *R_USB_COMMAND =
3988 IO_STATE(R_USB_COMMAND, port_sel, port2) |
3989 IO_STATE(R_USB_COMMAND, port_cmd, resume) |
3990 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
3991 } else {
3992 dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND "
3993 "with invalid wIndex == %d!", wIndex);
3994 }
3995
3996 OK (0);
3997 case (RH_PORT_POWER):
3998 OK (0); /* port power ** */
3999 case (RH_C_PORT_CONNECTION):
4000 if (wIndex == 1) {
4001 hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION);
4002 } else if (wIndex == 2) {
4003 hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION);
4004 } else {
4005 dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION "
4006 "with invalid wIndex == %d!", wIndex);
4007 }
4008
4009 OK (0);
4010 case (RH_C_PORT_ENABLE):
4011 if (wIndex == 1) {
4012 hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE);
4013 } else if (wIndex == 2) {
4014 hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE);
4015 } else {
4016 dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE "
4017 "with invalid wIndex == %d!", wIndex);
4018 }
4019 OK (0);
4020 case (RH_C_PORT_SUSPEND):
4021/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
4022 OK (0);
4023 case (RH_C_PORT_OVER_CURRENT):
4024 OK (0); /* port power over current ** */
4025 case (RH_C_PORT_RESET):
4026 if (wIndex == 1) {
4027 hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET);
4028 } else if (wIndex == 2) {
4029 hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET);
4030 } else {
4031 dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET "
4032 "with invalid index == %d!", wIndex);
4033 }
4034
4035 OK (0);
4036
4037 }
4038 break;
4039
4040 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
4041 switch (wValue) {
4042 case (RH_PORT_SUSPEND):
4043
4044 /* Make sure the controller isn't busy. */
4045 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4046
4047 if (wIndex == 1) {
4048 *R_USB_COMMAND =
4049 IO_STATE(R_USB_COMMAND, port_sel, port1) |
4050 IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
4051 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
4052 } else if (wIndex == 2) {
4053 *R_USB_COMMAND =
4054 IO_STATE(R_USB_COMMAND, port_sel, port2) |
4055 IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
4056 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
4057 } else {
4058 dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND "
4059 "with invalid wIndex == %d!", wIndex);
4060 }
4061
4062 OK (0);
4063 case (RH_PORT_RESET):
4064 if (wIndex == 1) {
4065
4066 port_1_reset:
4067 dbg_rh("Doing reset of port 1");
4068
4069 /* Make sure the controller isn't busy. */
4070 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4071
4072 *R_USB_COMMAND =
4073 IO_STATE(R_USB_COMMAND, port_sel, port1) |
4074 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4075 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
4076
4077 /* We must wait at least 10 ms for the device to recover.
4078 15 ms should be enough. */
4079 udelay(15000);
4080
4081 /* Wait for reset bit to go low (should be done by now). */
4082 while (hc->rh.prev_wPortStatus_1 &
4083 IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes));
4084
4085 /* If the port status is
4086 1) connected and enabled then there is a device and everything is fine
4087 2) neither connected nor enabled then there is no device, also fine
4088 3) connected and not enabled then we try again
4089 (Yes, there are other port status combinations besides these.) */
4090
4091 if ((hc->rh.prev_wPortStatus_1 &
4092 IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
4093 (hc->rh.prev_wPortStatus_1 &
4094 IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
4095 dbg_rh("Connected device on port 1, but port not enabled?"
4096 " Trying reset again.");
4097 goto port_2_reset;
4098 }
4099
4100 /* Diagnostic printouts. */
4101 if ((hc->rh.prev_wPortStatus_1 &
4102 IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) &&
4103 (hc->rh.prev_wPortStatus_1 &
4104 IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
4105 dbg_rh("No connected device on port 1");
4106 } else if ((hc->rh.prev_wPortStatus_1 &
4107 IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
4108 (hc->rh.prev_wPortStatus_1 &
4109 IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) {
4110 dbg_rh("Connected device on port 1, port 1 enabled");
4111 }
4112
4113 } else if (wIndex == 2) {
4114
4115 port_2_reset:
4116 dbg_rh("Doing reset of port 2");
4117
4118 /* Make sure the controller isn't busy. */
4119 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4120
4121 /* Issue the reset command. */
4122 *R_USB_COMMAND =
4123 IO_STATE(R_USB_COMMAND, port_sel, port2) |
4124 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4125 IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
4126
4127 /* We must wait at least 10 ms for the device to recover.
4128 15 ms should be enough. */
4129 udelay(15000);
4130
4131 /* Wait for reset bit to go low (should be done by now). */
4132 while (hc->rh.prev_wPortStatus_2 &
4133 IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes));
4134
4135 /* If the port status is
4136 1) connected and enabled then there is a device and everything is fine
4137 2) neither connected nor enabled then there is no device, also fine
4138 3) connected and not enabled then we try again
4139 (Yes, there are other port status combinations besides these.) */
4140
4141 if ((hc->rh.prev_wPortStatus_2 &
4142 IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
4143 (hc->rh.prev_wPortStatus_2 &
4144 IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
4145 dbg_rh("Connected device on port 2, but port not enabled?"
4146 " Trying reset again.");
4147 goto port_2_reset;
4148 }
4149
4150 /* Diagnostic printouts. */
4151 if ((hc->rh.prev_wPortStatus_2 &
4152 IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) &&
4153 (hc->rh.prev_wPortStatus_2 &
4154 IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
4155 dbg_rh("No connected device on port 2");
4156 } else if ((hc->rh.prev_wPortStatus_2 &
4157 IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
4158 (hc->rh.prev_wPortStatus_2 &
4159 IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) {
4160 dbg_rh("Connected device on port 2, port 2 enabled");
4161 }
4162
4163 } else {
4164 dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex);
4165 }
4166
4167 /* Make sure the controller isn't busy. */
4168 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4169
4170 /* If all enabled ports were disabled the host controller goes down into
4171 started mode, so we need to bring it back into the running state.
4172 (This is safe even if it's already in the running state.) */
4173 *R_USB_COMMAND =
4174 IO_STATE(R_USB_COMMAND, port_sel, nop) |
4175 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4176 IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
4177
4178 dbg_rh("...Done");
4179 OK(0);
4180
4181 case (RH_PORT_POWER):
4182 OK (0); /* port power ** */
4183 case (RH_PORT_ENABLE):
4184 /* There is no port enable command in the host controller, so if the
4185 port is already enabled, we do nothing. If not, we reset the port
4186 (with an ugly goto). */
4187
4188 if (wIndex == 1) {
4189 if (hc->rh.prev_wPortStatus_1 &
4190 IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) {
4191 goto port_1_reset;
4192 }
4193 } else if (wIndex == 2) {
4194 if (hc->rh.prev_wPortStatus_2 &
4195 IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) {
4196 goto port_2_reset;
4197 }
4198 } else {
4199 dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex);
4200 }
4201 OK (0);
4202 }
4203 break;
4204
4205 case RH_SET_ADDRESS:
4206 hc->rh.devnum = wValue;
4207 dbg_rh("RH address set to: %d", hc->rh.devnum);
4208 OK (0);
4209
4210 case RH_GET_DESCRIPTOR:
4211 switch ((wValue & 0xff00) >> 8) {
4212 case (0x01): /* device descriptor */
4213 len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength));
4214 memcpy (data, root_hub_dev_des, len);
4215 OK (len);
4216 case (0x02): /* configuration descriptor */
4217 len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength));
4218 memcpy (data, root_hub_config_des, len);
4219 OK (len);
4220 case (0x03): /* string descriptors */
4221 len = usb_root_hub_string (wValue & 0xff,
4222 0xff, "ETRAX 100LX",
4223 data, wLength);
4224 if (len > 0) {
4225 OK(min(leni, len));
4226 } else {
4227 stat = -EPIPE;
4228 }
4229
4230 }
4231 break;
4232
4233 case RH_GET_DESCRIPTOR | RH_CLASS:
4234 root_hub_hub_des[2] = hc->rh.numports;
4235 len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength));
4236 memcpy (data, root_hub_hub_des, len);
4237 OK (len);
4238
4239 case RH_GET_CONFIGURATION:
4240 *(__u8 *) data = 0x01;
4241 OK (1);
4242
4243 case RH_SET_CONFIGURATION:
4244 OK (0);
4245
4246 default:
4247 stat = -EPIPE;
4248 }
4249
4250 urb->actual_length = len;
4251 urb->status = stat;
4252 urb->dev = NULL;
4253 if (urb->complete) {
4254 urb->complete(urb, NULL);
4255 }
4256 DBFEXIT;
4257
4258 return 0;
4259}
4260
4261static void
4262etrax_usb_bulk_eot_timer_func(unsigned long dummy)
4263{
4264 /* Because of a race condition in the top half, we might miss a bulk eot.
4265 This timer "simulates" a bulk eot if we don't get one for a while, hopefully
4266 correcting the situation. */
4267 dbg_bulk("bulk_eot_timer timed out.");
4268 etrax_usb_hc_bulk_eot_interrupt(1);
4269}
4270
4271static void*
4272etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
4273 unsigned mem_flags, dma_addr_t *dma)
4274{
4275 return kmalloc(size, mem_flags);
4276}
4277
4278static void
4279etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma)
4280{
4281 kfree(addr);
4282}
4283
4284
4285static struct device fake_device;
4286
4287static int __init etrax_usb_hc_init(void)
4288{
4289 static etrax_hc_t *hc;
4290 struct usb_bus *bus;
4291 struct usb_device *usb_rh;
4292 int i;
4293
4294 DBFENTER;
4295
4296 info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version);
4297
4298 hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL);
4299 assert(hc != NULL);
4300
4301 /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
4302 /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate
4303 SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) ==
4304 sizeof(USB_SB_Desc_t). */
4305
4306 usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0,
4307 SLAB_HWCACHE_ALIGN, 0, 0);
4308 assert(usb_desc_cache != NULL);
4309
4310 top_half_reg_cache = kmem_cache_create("top_half_reg_cache",
4311 sizeof(usb_interrupt_registers_t),
4312 0, SLAB_HWCACHE_ALIGN, 0, 0);
4313 assert(top_half_reg_cache != NULL);
4314
4315 isoc_compl_cache = kmem_cache_create("isoc_compl_cache",
4316 sizeof(usb_isoc_complete_data_t),
4317 0, SLAB_HWCACHE_ALIGN, 0, 0);
4318 assert(isoc_compl_cache != NULL);
4319
4320 etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations);
4321 hc->bus = bus;
4322 bus->bus_name="ETRAX 100LX";
4323 bus->hcpriv = hc;
4324
4325 /* Initialize RH to the default address.
4326 And make sure that we have no status change indication */
4327 hc->rh.numports = 2; /* The RH has two ports */
4328 hc->rh.devnum = 1;
4329 hc->rh.wPortChange_1 = 0;
4330 hc->rh.wPortChange_2 = 0;
4331
4332 /* Also initate the previous values to zero */
4333 hc->rh.prev_wPortStatus_1 = 0;
4334 hc->rh.prev_wPortStatus_2 = 0;
4335
4336 /* Initialize the intr-traffic flags */
4337 /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */
4338 hc->intr.sleeping = 0;
4339 hc->intr.wq = NULL;
4340
4341 epid_usage_bitmask = 0;
4342 epid_out_traffic = 0;
4343
4344 /* Mark the invalid epid as being used. */
4345 set_bit(INVALID_EPID, (void *)&epid_usage_bitmask);
4346 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID);
4347 nop();
4348 /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */
4349 *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) |
4350 IO_FIELD(R_USB_EPT_DATA, max_len, 1));
4351
4352 /* Mark the dummy epid as being used. */
4353 set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask);
4354 *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID);
4355 nop();
4356 *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) |
4357 IO_FIELD(R_USB_EPT_DATA, max_len, 1));
4358
4359 /* Initialize the urb list by initiating a head for each list. */
4360 for (i = 0; i < NBR_OF_EPIDS; i++) {
4361 INIT_LIST_HEAD(&urb_list[i]);
4362 }
4363 spin_lock_init(&urb_list_lock);
4364
4365 INIT_LIST_HEAD(&urb_unlink_list);
4366
4367
4368 /* Initiate the bulk start timer. */
4369 init_timer(&bulk_start_timer);
4370 bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
4371 bulk_start_timer.function = etrax_usb_bulk_start_timer_func;
4372 add_timer(&bulk_start_timer);
4373
4374
4375 /* Initiate the bulk eot timer. */
4376 init_timer(&bulk_eot_timer);
4377 bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
4378 bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func;
4379 add_timer(&bulk_eot_timer);
4380
4381 /* Set up the data structures for USB traffic. Note that this must be done before
4382 any interrupt that relies on sane DMA list occurrs. */
4383 init_rx_buffers();
4384 init_tx_bulk_ep();
4385 init_tx_ctrl_ep();
4386 init_tx_intr_ep();
4387 init_tx_isoc_ep();
4388
4389 device_initialize(&fake_device);
4390 kobject_set_name(&fake_device.kobj, "etrax_usb");
4391 kobject_add(&fake_device.kobj);
4392 kobject_uevent(&fake_device.kobj, KOBJ_ADD);
4393 hc->bus->controller = &fake_device;
4394 usb_register_bus(hc->bus);
4395
4396 *R_IRQ_MASK2_SET =
4397 /* Note that these interrupts are not used. */
4398 IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
4399 /* Sub channel 1 (ctrl) descr. interrupts are used. */
4400 IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
4401 IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
4402 /* Sub channel 3 (isoc) descr. interrupts are used. */
4403 IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
4404
4405 /* Note that the dma9_descr interrupt is not used. */
4406 *R_IRQ_MASK2_SET =
4407 IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
4408 IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
4409
4410 /* FIXME: Enable iso_eof only when isoc traffic is running. */
4411 *R_USB_IRQ_MASK_SET =
4412 IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) |
4413 IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
4414 IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
4415 IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
4416 IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
4417
4418
4419 if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0,
4420 "ETRAX 100LX built-in USB (HC)", hc)) {
4421 err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
4422 etrax_usb_hc_cleanup();
4423 DBFEXIT;
4424 return -1;
4425 }
4426
4427 if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0,
4428 "ETRAX 100LX built-in USB (Rx)", hc)) {
4429 err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
4430 etrax_usb_hc_cleanup();
4431 DBFEXIT;
4432 return -1;
4433 }
4434
4435 if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0,
4436 "ETRAX 100LX built-in USB (Tx)", hc)) {
4437 err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
4438 etrax_usb_hc_cleanup();
4439 DBFEXIT;
4440 return -1;
4441 }
4442
4443 /* R_USB_COMMAND:
4444 USB commands in host mode. The fields in this register should all be
4445 written to in one write. Do not read-modify-write one field at a time. A
4446 write to this register will trigger events in the USB controller and an
4447 incomplete command may lead to unpredictable results, and in worst case
4448 even to a deadlock in the controller.
4449 (Note however that the busy field is read-only, so no need to write to it.) */
4450
4451 /* Check the busy bit before writing to R_USB_COMMAND. */
4452
4453 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4454
4455 /* Reset the USB interface. */
4456 *R_USB_COMMAND =
4457 IO_STATE(R_USB_COMMAND, port_sel, nop) |
4458 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4459 IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
4460
4461 /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800),
4462 to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may
4463 allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation.
4464
4465 While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK
4466 behaviour, it doesn't solve this problem. What happens is that a control transfer will not
4467 be interrupted in its data stage when PSTART happens (the point at which periodic traffic
4468 is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before
4469 PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done,
4470 there may be too little time left for an isochronous transfer, causing an epid attention
4471 interrupt due to perror. The work-around for this is to let the control transfers run at the
4472 end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't
4473 fit into the frame. However, since there will *always* be a control transfer at the beginning
4474 of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer
4475 which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to
4476 this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make
4477 sure that the periodic transfers that are inserted will always fit in the frame.
4478
4479 The idea was suggested that a control transfer could be split up into several 8 byte transfers,
4480 so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this
4481 hasn't been implemented.
4482
4483 The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra
4484 for possible bit stuffing. */
4485
4486 *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
4487
4488#ifdef CONFIG_ETRAX_USB_HOST_PORT1
4489 *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
4490#endif
4491
4492#ifdef CONFIG_ETRAX_USB_HOST_PORT2
4493 *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
4494#endif
4495
4496 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4497
4498 /* Configure the USB interface as a host controller. */
4499 *R_USB_COMMAND =
4500 IO_STATE(R_USB_COMMAND, port_sel, nop) |
4501 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4502 IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
4503
4504 /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled
4505 sequence of resetting the ports. If we reset both ports now, and there are devices
4506 on both ports, we will get a bus error because both devices will answer the set address
4507 request. */
4508
4509 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4510
4511 /* Start processing of USB traffic. */
4512 *R_USB_COMMAND =
4513 IO_STATE(R_USB_COMMAND, port_sel, nop) |
4514 IO_STATE(R_USB_COMMAND, port_cmd, reset) |
4515 IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
4516
4517 while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
4518
4519 usb_rh = usb_alloc_dev(NULL, hc->bus, 0);
4520 hc->bus->root_hub = usb_rh;
4521 usb_rh->state = USB_STATE_ADDRESS;
4522 usb_rh->speed = USB_SPEED_FULL;
4523 usb_rh->devnum = 1;
4524 hc->bus->devnum_next = 2;
4525 usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64);
4526 usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE);
4527 usb_new_device(usb_rh);
4528
4529 DBFEXIT;
4530
4531 return 0;
4532}
4533
4534static void etrax_usb_hc_cleanup(void)
4535{
4536 DBFENTER;
4537
4538 free_irq(ETRAX_USB_HC_IRQ, NULL);
4539 free_irq(ETRAX_USB_RX_IRQ, NULL);
4540 free_irq(ETRAX_USB_TX_IRQ, NULL);
4541
4542 usb_deregister_bus(etrax_usb_bus);
4543
4544 /* FIXME: call kmem_cache_destroy here? */
4545
4546 DBFEXIT;
4547}
4548
4549module_init(etrax_usb_hc_init);
4550module_exit(etrax_usb_hc_cleanup);
diff --git a/drivers/usb/host/hc_crisv10.h b/drivers/usb/host/hc_crisv10.h
deleted file mode 100644
index 62f77111d418..000000000000
--- a/drivers/usb/host/hc_crisv10.h
+++ /dev/null
@@ -1,289 +0,0 @@
1#ifndef __LINUX_ETRAX_USB_H
2#define __LINUX_ETRAX_USB_H
3
4#include <linux/types.h>
5#include <linux/list.h>
6
7typedef struct USB_IN_Desc {
8 volatile __u16 sw_len;
9 volatile __u16 command;
10 volatile unsigned long next;
11 volatile unsigned long buf;
12 volatile __u16 hw_len;
13 volatile __u16 status;
14} USB_IN_Desc_t;
15
16typedef struct USB_SB_Desc {
17 volatile __u16 sw_len;
18 volatile __u16 command;
19 volatile unsigned long next;
20 volatile unsigned long buf;
21 __u32 dummy;
22} USB_SB_Desc_t;
23
24typedef struct USB_EP_Desc {
25 volatile __u16 hw_len;
26 volatile __u16 command;
27 volatile unsigned long sub;
28 volatile unsigned long next;
29 __u32 dummy;
30} USB_EP_Desc_t;
31
32struct virt_root_hub {
33 int devnum;
34 void *urb;
35 void *int_addr;
36 int send;
37 int interval;
38 int numports;
39 struct timer_list rh_int_timer;
40 volatile __u16 wPortChange_1;
41 volatile __u16 wPortChange_2;
42 volatile __u16 prev_wPortStatus_1;
43 volatile __u16 prev_wPortStatus_2;
44};
45
46struct etrax_usb_intr_traffic {
47 int sleeping;
48 int error;
49 struct wait_queue *wq;
50};
51
52typedef struct etrax_usb_hc {
53 struct usb_bus *bus;
54 struct virt_root_hub rh;
55 struct etrax_usb_intr_traffic intr;
56} etrax_hc_t;
57
58typedef enum {
59 STARTED,
60 NOT_STARTED,
61 UNLINK,
62 TRANSFER_DONE,
63 WAITING_FOR_DESCR_INTR
64} etrax_usb_urb_state_t;
65
66
67
68typedef struct etrax_usb_urb_priv {
69 /* The first_sb field is used for freeing all SB descriptors belonging
70 to an urb. The corresponding ep descriptor's sub pointer cannot be
71 used for this since the DMA advances the sub pointer as it processes
72 the sb list. */
73 USB_SB_Desc_t *first_sb;
74 /* The last_sb field referes to the last SB descriptor that belongs to
75 this urb. This is important to know so we can free the SB descriptors
76 that ranges between first_sb and last_sb. */
77 USB_SB_Desc_t *last_sb;
78
79 /* The rx_offset field is used in ctrl and bulk traffic to keep track
80 of the offset in the urb's transfer_buffer where incoming data should be
81 copied to. */
82 __u32 rx_offset;
83
84 /* Counter used in isochronous transfers to keep track of the
85 number of packets received/transmitted. */
86 __u32 isoc_packet_counter;
87
88 /* This field is used to pass information about the urb's current state between
89 the various interrupt handlers (thus marked volatile). */
90 volatile etrax_usb_urb_state_t urb_state;
91
92 /* Connection between the submitted urb and ETRAX epid number */
93 __u8 epid;
94
95 /* The rx_data_list field is used for periodic traffic, to hold
96 received data for later processing in the the complete_urb functions,
97 where the data us copied to the urb's transfer_buffer. Basically, we
98 use this intermediate storage because we don't know when it's safe to
99 reuse the transfer_buffer (FIXME?). */
100 struct list_head rx_data_list;
101} etrax_urb_priv_t;
102
103/* This struct is for passing data from the top half to the bottom half. */
104typedef struct usb_interrupt_registers
105{
106 etrax_hc_t *hc;
107 __u32 r_usb_epid_attn;
108 __u8 r_usb_status;
109 __u16 r_usb_rh_port_status_1;
110 __u16 r_usb_rh_port_status_2;
111 __u32 r_usb_irq_mask_read;
112 __u32 r_usb_fm_number;
113 struct work_struct usb_bh;
114} usb_interrupt_registers_t;
115
116/* This struct is for passing data from the isoc top half to the isoc bottom half. */
117typedef struct usb_isoc_complete_data
118{
119 struct urb *urb;
120 struct work_struct usb_bh;
121} usb_isoc_complete_data_t;
122
123/* This struct holds data we get from the rx descriptors for DMA channel 9
124 for periodic traffic (intr and isoc). */
125typedef struct rx_data
126{
127 void *data;
128 int length;
129 struct list_head list;
130} rx_data_t;
131
132typedef struct urb_entry
133{
134 struct urb *urb;
135 struct list_head list;
136} urb_entry_t;
137
138/* ---------------------------------------------------------------------------
139 Virtual Root HUB
140 ------------------------------------------------------------------------- */
141/* destination of request */
142#define RH_INTERFACE 0x01
143#define RH_ENDPOINT 0x02
144#define RH_OTHER 0x03
145
146#define RH_CLASS 0x20
147#define RH_VENDOR 0x40
148
149/* Requests: bRequest << 8 | bmRequestType */
150#define RH_GET_STATUS 0x0080
151#define RH_CLEAR_FEATURE 0x0100
152#define RH_SET_FEATURE 0x0300
153#define RH_SET_ADDRESS 0x0500
154#define RH_GET_DESCRIPTOR 0x0680
155#define RH_SET_DESCRIPTOR 0x0700
156#define RH_GET_CONFIGURATION 0x0880
157#define RH_SET_CONFIGURATION 0x0900
158#define RH_GET_STATE 0x0280
159#define RH_GET_INTERFACE 0x0A80
160#define RH_SET_INTERFACE 0x0B00
161#define RH_SYNC_FRAME 0x0C80
162/* Our Vendor Specific Request */
163#define RH_SET_EP 0x2000
164
165
166/* Hub port features */
167#define RH_PORT_CONNECTION 0x00
168#define RH_PORT_ENABLE 0x01
169#define RH_PORT_SUSPEND 0x02
170#define RH_PORT_OVER_CURRENT 0x03
171#define RH_PORT_RESET 0x04
172#define RH_PORT_POWER 0x08
173#define RH_PORT_LOW_SPEED 0x09
174#define RH_C_PORT_CONNECTION 0x10
175#define RH_C_PORT_ENABLE 0x11
176#define RH_C_PORT_SUSPEND 0x12
177#define RH_C_PORT_OVER_CURRENT 0x13
178#define RH_C_PORT_RESET 0x14
179
180/* Hub features */
181#define RH_C_HUB_LOCAL_POWER 0x00
182#define RH_C_HUB_OVER_CURRENT 0x01
183
184#define RH_DEVICE_REMOTE_WAKEUP 0x00
185#define RH_ENDPOINT_STALL 0x01
186
187/* Our Vendor Specific feature */
188#define RH_REMOVE_EP 0x00
189
190
191#define RH_ACK 0x01
192#define RH_REQ_ERR -1
193#define RH_NACK 0x00
194
195/* Field definitions for */
196
197#define USB_IN_command__eol__BITNR 0 /* command macros */
198#define USB_IN_command__eol__WIDTH 1
199#define USB_IN_command__eol__no 0
200#define USB_IN_command__eol__yes 1
201
202#define USB_IN_command__intr__BITNR 3
203#define USB_IN_command__intr__WIDTH 1
204#define USB_IN_command__intr__no 0
205#define USB_IN_command__intr__yes 1
206
207#define USB_IN_status__eop__BITNR 1 /* status macros. */
208#define USB_IN_status__eop__WIDTH 1
209#define USB_IN_status__eop__no 0
210#define USB_IN_status__eop__yes 1
211
212#define USB_IN_status__eot__BITNR 5
213#define USB_IN_status__eot__WIDTH 1
214#define USB_IN_status__eot__no 0
215#define USB_IN_status__eot__yes 1
216
217#define USB_IN_status__error__BITNR 6
218#define USB_IN_status__error__WIDTH 1
219#define USB_IN_status__error__no 0
220#define USB_IN_status__error__yes 1
221
222#define USB_IN_status__nodata__BITNR 7
223#define USB_IN_status__nodata__WIDTH 1
224#define USB_IN_status__nodata__no 0
225#define USB_IN_status__nodata__yes 1
226
227#define USB_IN_status__epid__BITNR 8
228#define USB_IN_status__epid__WIDTH 5
229
230#define USB_EP_command__eol__BITNR 0
231#define USB_EP_command__eol__WIDTH 1
232#define USB_EP_command__eol__no 0
233#define USB_EP_command__eol__yes 1
234
235#define USB_EP_command__eof__BITNR 1
236#define USB_EP_command__eof__WIDTH 1
237#define USB_EP_command__eof__no 0
238#define USB_EP_command__eof__yes 1
239
240#define USB_EP_command__intr__BITNR 3
241#define USB_EP_command__intr__WIDTH 1
242#define USB_EP_command__intr__no 0
243#define USB_EP_command__intr__yes 1
244
245#define USB_EP_command__enable__BITNR 4
246#define USB_EP_command__enable__WIDTH 1
247#define USB_EP_command__enable__no 0
248#define USB_EP_command__enable__yes 1
249
250#define USB_EP_command__hw_valid__BITNR 5
251#define USB_EP_command__hw_valid__WIDTH 1
252#define USB_EP_command__hw_valid__no 0
253#define USB_EP_command__hw_valid__yes 1
254
255#define USB_EP_command__epid__BITNR 8
256#define USB_EP_command__epid__WIDTH 5
257
258#define USB_SB_command__eol__BITNR 0 /* command macros. */
259#define USB_SB_command__eol__WIDTH 1
260#define USB_SB_command__eol__no 0
261#define USB_SB_command__eol__yes 1
262
263#define USB_SB_command__eot__BITNR 1
264#define USB_SB_command__eot__WIDTH 1
265#define USB_SB_command__eot__no 0
266#define USB_SB_command__eot__yes 1
267
268#define USB_SB_command__intr__BITNR 3
269#define USB_SB_command__intr__WIDTH 1
270#define USB_SB_command__intr__no 0
271#define USB_SB_command__intr__yes 1
272
273#define USB_SB_command__tt__BITNR 4
274#define USB_SB_command__tt__WIDTH 2
275#define USB_SB_command__tt__zout 0
276#define USB_SB_command__tt__in 1
277#define USB_SB_command__tt__out 2
278#define USB_SB_command__tt__setup 3
279
280
281#define USB_SB_command__rem__BITNR 8
282#define USB_SB_command__rem__WIDTH 6
283
284#define USB_SB_command__full__BITNR 6
285#define USB_SB_command__full__WIDTH 1
286#define USB_SB_command__full__no 0
287#define USB_SB_command__full__yes 1
288
289#endif
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 19:23:04 -0500