Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

8 files changed, 209 insertions, 150 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f80..cc60759083bf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
           adapter will *NOT* work with PC cards that do not contain an OHCI
           controller.
 
-          For those PC cards that contain multiple OHCI controllers only ther
+          For those PC cards that contain multiple OHCI controllers only the
           first one is used.
 
           The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9030994aba98..025d33313681 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -126,6 +126,11 @@ static unsigned park = 0;
 module_param (park, uint, S_IRUGO);
 MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
 
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
 #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd)
 
         temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
         ehci_info (ehci,
-                "USB %x.%x started, EHCI %x.%02x, driver %s\n",
+                "USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
                 ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-                temp >> 8, temp & 0xff, DRIVER_VERSION);
+                temp >> 8, temp & 0xff, DRIVER_VERSION,
+                ignore_oc ? ", overcurrent ignored" : "");
 
         writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
 
@@ -613,9 +619,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                 unsigned        i = HCS_N_PORTS (ehci->hcs_params);
 
                 /* resume root hub? */
-                status = readl (&ehci->regs->command);
-                if (!(status & CMD_RUN))
-                        writel (status | CMD_RUN, &ehci->regs->command);
+                if (!(readl(&ehci->regs->command) & CMD_RUN))
+                        usb_hcd_resume_root_hub(hcd);
 
                 while (i--) {
                         int pstatus = readl (&ehci->regs->port_status [i]);
@@ -632,7 +637,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                          */
                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
                         ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
-                        usb_hcd_resume_root_hub(hcd);
                 }
         }
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722c102b..bfe5f307cba6 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
         int                     port;
+        int                     mask;
 
         if (time_before (jiffies, ehci->next_statechange))
                 msleep(5);
@@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
                 ehci->reclaim_ready = 1;
         ehci_work(ehci);
 
-        /* suspend any active/unsuspended ports, maybe allow wakeup */
+        /* Unlike other USB host controller types, EHCI doesn't have
+         * any notion of "global" or bus-wide suspend.  The driver has
+         * to manually suspend all the active unsuspended ports, and
+         * then manually resume them in the bus_resume() routine.
+         */
+        ehci->bus_suspended = 0;
         while (port--) {
                 u32 __iomem     *reg = &ehci->regs->port_status [port];
                 u32             t1 = readl (reg) & ~PORT_RWC_BITS;
                 u32             t2 = t1;
 
-                if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
+                /* keep track of which ports we suspend */
+                if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+                                !(t1 & PORT_SUSPEND)) {
                         t2 |= PORT_SUSPEND;
+                        set_bit(port, &ehci->bus_suspended);
+                }
+
+                /* enable remote wakeup on all ports */
                 if (device_may_wakeup(&hcd->self.root_hub->dev))
                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
                 else
@@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
         ehci_halt (ehci);
         hcd->state = HC_STATE_SUSPENDED;
 
+        /* allow remote wakeup */
+        mask = INTR_MASK;
+        if (!device_may_wakeup(&hcd->self.root_hub->dev))
+                mask &= ~STS_PCD;
+        writel(mask, &ehci->regs->intr_enable);
+        readl(&ehci->regs->intr_enable);
+
         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
         spin_unlock_irq (&ehci->lock);
         return 0;
@@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
         u32                     temp;
         int                     i;
-        int                     intr_enable;
 
         if (time_before (jiffies, ehci->next_statechange))
                 msleep(5);
@@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
          * the last user of the controller, not reset/pm hardware keeping
          * state we gave to it.
          */
+        temp = readl(&ehci->regs->intr_enable);
+        ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
 
-        /* re-init operational registers in case we lost power */
-        if (readl (&ehci->regs->intr_enable) == 0) {
-                /* at least some APM implementations will try to deliver
-                 * IRQs right away, so delay them until we're ready.
-                 */
-                intr_enable = 1;
-                writel (0, &ehci->regs->segment);
-                writel (ehci->periodic_dma, &ehci->regs->frame_list);
-                writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
-        } else
-                intr_enable = 0;
-        ehci_dbg(ehci, "resume root hub%s\n",
-                        intr_enable ? " after power loss" : "");
+        /* at least some APM implementations will try to deliver
+         * IRQs right away, so delay them until we're ready.
+         */
+        writel(0, &ehci->regs->intr_enable);
+
+        /* re-init operational registers */
+        writel(0, &ehci->regs->segment);
+        writel(ehci->periodic_dma, &ehci->regs->frame_list);
+        writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
 
         /* restore CMD_RUN, framelist size, and irq threshold */
         writel (ehci->command, &ehci->regs->command);
 
-        /* take ports out of suspend */
+        /* manually resume the ports we suspended during bus_suspend() */
         i = HCS_N_PORTS (ehci->hcs_params);
         while (i--) {
                 temp = readl (&ehci->regs->port_status [i]);
                 temp &= ~(PORT_RWC_BITS
                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
-                if (temp & PORT_SUSPEND) {
+                if (test_bit(i, &ehci->bus_suspended) &&
+                                (temp & PORT_SUSPEND)) {
                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
                         temp |= PORT_RESUME;
                 }
@@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         mdelay (20);
         while (i--) {
                 temp = readl (&ehci->regs->port_status [i]);
-                if ((temp & PORT_SUSPEND) == 0)
-                        continue;
-                temp &= ~(PORT_RWC_BITS | PORT_RESUME);
-                writel (temp, &ehci->regs->port_status [i]);
-                ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+                if (test_bit(i, &ehci->bus_suspended) &&
+                                (temp & PORT_SUSPEND)) {
+                        temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+                        writel (temp, &ehci->regs->port_status [i]);
+                        ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+                }
         }
         (void) readl (&ehci->regs->command);
 
@@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         hcd->state = HC_STATE_RUNNING;
 
         /* Now we can safely re-enable irqs */
-        if (intr_enable)
-                writel (INTR_MASK, &ehci->regs->intr_enable);
+        writel(INTR_MASK, &ehci->regs->intr_enable);
 
         spin_unlock_irq (&ehci->lock);
         return 0;
@@ -218,6 +235,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
         u32             temp, status = 0;
+        u32             mask;
         int             ports, i, retval = 1;
         unsigned long   flags;
 
@@ -233,6 +251,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 retval++;
         }
 
+        /* Some boards (mostly VIA?) report bogus overcurrent indications,
+         * causing massive log spam unless we completely ignore them.  It
+         * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+         * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+         * PORT_POWER; that's surprising, but maybe within-spec.
+         */
+        if (!ignore_oc)
+                mask = PORT_CSC | PORT_PEC | PORT_OCC;
+        else
+                mask = PORT_CSC | PORT_PEC;
+        // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
         /* no hub change reports (bit 0) for now (power, ...) */
 
         /* port N changes (bit N)? */
@@ -250,8 +280,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 }
                 if (!(temp & PORT_CONNECT))
                         ehci->reset_done [i] = 0;
-                if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
-                                // PORT_STAT_C_SUSPEND?
+                if ((temp & mask) != 0
                                 || ((temp & PORT_RESUME) != 0
                                         && time_after (jiffies,
                                                 ehci->reset_done [i]))) {
@@ -319,6 +348,7 @@ static int ehci_hub_control (
         u32             temp, status;
         unsigned long   flags;
         int             retval = 0;
+        unsigned        selector;
 
         /*
          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -417,7 +447,7 @@ static int ehci_hub_control (
                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
                 if (temp & PORT_PEC)
                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
-                if (temp & PORT_OCC)
+                if ((temp & PORT_OCC) && !ignore_oc)
                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 
                 /* whoever resumes must GetPortStatus to complete it!! */
@@ -506,6 +536,8 @@ static int ehci_hub_control (
                 }
                 break;
         case SetPortFeature:
+                selector = wIndex >> 8;
+                wIndex &= 0xff;
                 if (!wIndex || wIndex > ports)
                         goto error;
                 wIndex--;
@@ -559,6 +591,22 @@ static int ehci_hub_control (
                         }
                         writel (temp, &ehci->regs->port_status [wIndex]);
                         break;
+
+                /* For downstream facing ports (these):  one hub port is put
+                 * into test mode according to USB2 11.24.2.13, then the hub
+                 * must be reset (which for root hub now means rmmod+modprobe,
+                 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+                 * about the EHCI-specific stuff.
+                 */
+                case USB_PORT_FEAT_TEST:
+                        if (!selector || selector > 5)
+                                goto error;
+                        ehci_quiesce(ehci);
+                        ehci_halt(ehci);
+                        temp |= selector << 16;
+                        writel (temp, &ehci->regs->port_status [wIndex]);
+                        break;
+
                 default:
                         goto error;
                 }
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index e51c1ed81ac4..4bc7970ba3ef 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -257,9 +257,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 static int ehci_pci_resume(struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
-        unsigned                port;
         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
-        int                     retval = -EINVAL;
 
         // maybe restore FLADJ
 
@@ -269,27 +267,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
         /* Mark hardware accessible again as we are out of D3 state by now */
         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-        /* If CF is clear, we lost PCI Vaux power and need to restart.  */
-        if (readl(&ehci->regs->configured_flag) != FLAG_CF)
-                goto restart;
-
-        /* If any port is suspended (or owned by the companion),
-         * we know we can/must resume the HC (and mustn't reset it).
-         * We just defer that to the root hub code.
+        /* If CF is still set, we maintained PCI Vaux power.
+         * Just undo the effect of ehci_pci_suspend().
          */
-        for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
-                u32     status;
-                port--;
-                status = readl(&ehci->regs->port_status [port]);
-                if (!(status & PORT_POWER))
-                        continue;
-                if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
-                        usb_hcd_resume_root_hub(hcd);
-                        return 0;
-                }
+        if (readl(&ehci->regs->configured_flag) == FLAG_CF) {
+                int     mask = INTR_MASK;
+
+                if (!device_may_wakeup(&hcd->self.root_hub->dev))
+                        mask &= ~STS_PCD;
+                writel(mask, &ehci->regs->intr_enable);
+                readl(&ehci->regs->intr_enable);
+                return 0;
         }
 
-restart:
         ehci_dbg(ehci, "lost power, restarting\n");
         usb_root_hub_lost_power(hcd->self.root_hub);
 
@@ -307,13 +297,15 @@ restart:
         ehci_work(ehci);
         spin_unlock_irq(&ehci->lock);
 
-        /* restart; khubd will disconnect devices */
-        retval = ehci_run(hcd);
-
         /* here we "know" root ports should always stay powered */
         ehci_port_power(ehci, 1);
 
-        return retval;
+        writel(ehci->command, &ehci->regs->command);
+        writel(FLAG_CF, &ehci->regs->configured_flag);
+        readl(&ehci->regs->command);    /* unblock posted writes */
+
+        hcd->state = HC_STATE_SUSPENDED;
+        return 0;
 }
 #endif
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bbc3082a73d7..74dbc6c8228f 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -74,6 +74,7 @@ struct ehci_hcd {			/* one per controller */
 
         /* per root hub port */
         unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
+        unsigned long           bus_suspended;
 
         /* per-HC memory pools (could be per-bus, but ...) */
         struct dma_pool         *qh_pool;       /* qh per active urb */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ea4714e557e4..a95275a401b1 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
                 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
                 ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
                                 &regs->intrstatus);
+
+                /* NOTE: Vendors didn't always make the same implementation
+                 * choices for RHSC.  Many followed the spec; RHSC triggers
+                 * on an edge, like setting and maybe clearing a port status
+                 * change bit.  With others it's level-triggered, active
+                 * until khubd clears all the port status change bits.  We'll
+                 * always disable it here and rely on polling until khubd
+                 * re-enables it.
+                 */
+                ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
                 usb_hcd_poll_rh_status(hcd);
         }
 
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 6995ea36f2e8..2441642cb7b4 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -41,7 +41,11 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 
-        ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+        spin_lock_irq(&ohci->lock);
+        if (!ohci->autostop)
+                del_timer(&hcd->rh_timer);      /* Prevent next poll */
+        ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+        spin_unlock_irq(&ohci->lock);
 }
 
 #define OHCI_SCHED_ENABLES \
@@ -50,6 +54,9 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 static void dl_done_list (struct ohci_hcd *);
 static void finish_unlinks (struct ohci_hcd *, u16);
 
+#ifdef  CONFIG_PM
+static int ohci_restart(struct ohci_hcd *ohci);
+
 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
 __releases(ohci->lock)
 __acquires(ohci->lock)
@@ -132,8 +139,6 @@ static inline struct ed *find_head (struct ed *ed)
         return ed;
 }
 
-static int ohci_restart (struct ohci_hcd *ohci);
-
 /* caller has locked the root hub */
 static int ohci_rh_resume (struct ohci_hcd *ohci)
 __releases(ohci->lock)
@@ -169,7 +174,7 @@ __acquires(ohci->lock)
                 break;
         case OHCI_USB_RESUME:
                 /* HCFS changes sometime after INTR_RD */
-                ohci_info(ohci, "%swakeup\n",
+                ohci_dbg(ohci, "%swakeup root hub\n",
                                 autostopped ? "auto-" : "");
                 break;
         case OHCI_USB_OPER:
@@ -181,7 +186,6 @@ __acquires(ohci->lock)
                 ohci_dbg (ohci, "lost power\n");
                 status = -EBUSY;
         }
-#ifdef  CONFIG_PM
         if (status == -EBUSY) {
                 if (!autostopped) {
                         spin_unlock_irq (&ohci->lock);
@@ -191,25 +195,12 @@ __acquires(ohci->lock)
                 }
                 return status;
         }
-#endif
         if (status != -EINPROGRESS)
                 return status;
         if (autostopped)
                 goto skip_resume;
         spin_unlock_irq (&ohci->lock);
 
-        temp = ohci->num_ports;
-        while (temp--) {
-                u32 stat = ohci_readl (ohci,
-                                       &ohci->regs->roothub.portstatus [temp]);
-
-                /* force global, not selective, resume */
-                if (!(stat & RH_PS_PSS))
-                        continue;
-                ohci_writel (ohci, RH_PS_POCI,
-                                &ohci->regs->roothub.portstatus [temp]);
-        }
-
         /* Some controllers (lucent erratum) need extra-long delays */
         msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 
@@ -217,6 +208,7 @@ __acquires(ohci->lock)
         temp &= OHCI_CTRL_HCFS;
         if (temp != OHCI_USB_RESUME) {
                 ohci_err (ohci, "controller won't resume\n");
+                spin_lock_irq(&ohci->lock);
                 return -EBUSY;
         }
 
@@ -296,8 +288,6 @@ skip_resume:
         return 0;
 }
 
-#ifdef  CONFIG_PM
-
 static int ohci_bus_suspend (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
@@ -335,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
         return rc;
 }
 
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+
+        case OHCI_USB_OPER:
+                /* keep on polling until we know a device is connected
+                 * and RHSC is enabled */
+                if (!ohci->autostop) {
+                        if (any_connected ||
+                                        !device_may_wakeup(&ohci_to_hcd(ohci)
+                                                ->self.root_hub->dev)) {
+                                if (ohci_readl(ohci, &ohci->regs->intrenable) &
+                                                OHCI_INTR_RHSC)
+                                        poll_rh = 0;
+                        } else {
+                                ohci->autostop = 1;
+                                ohci->next_statechange = jiffies + HZ;
+                        }
+
+                /* if no devices have been attached for one second, autostop */
+                } else {
+                        if (changed || any_connected) {
+                                ohci->autostop = 0;
+                                ohci->next_statechange = jiffies +
+                                                STATECHANGE_DELAY;
+                        } else if (time_after_eq(jiffies,
+                                                ohci->next_statechange)
+                                        && !ohci->ed_rm_list
+                                        && !(ohci->hc_control &
+                                                OHCI_SCHED_ENABLES)) {
+                                ohci_rh_suspend(ohci, 1);
+                        }
+                }
+                break;
+
+        /* if there is a port change, autostart or ask to be resumed */
+        case OHCI_USB_SUSPEND:
+        case OHCI_USB_RESUME:
+                if (changed) {
+                        if (ohci->autostop)
+                                ohci_rh_resume(ohci);
+                        else
+                                usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+                } else {
+                        /* everything is idle, no need for polling */
+                        poll_rh = 0;
+                }
+                break;
+        }
+        return poll_rh;
+}
+
+#else   /* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+        return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        /* keep on polling until RHSC is enabled */
+        if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+                poll_rh = 0;
+        return poll_rh;
+}
+
 #endif  /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -346,7 +413,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
         int             i, changed = 0, length = 1;
-        int             any_connected = 0, rhsc_enabled = 1;
+        int             any_connected = 0;
         unsigned long   flags;
 
         spin_lock_irqsave (&ohci->lock, flags);
@@ -387,67 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 }
         }
 
-        /* NOTE:  vendors didn't always make the same implementation
-         * choices for RHSC.  Sometimes it triggers on an edge (like
-         * setting and maybe clearing a port status change bit); and
-         * it's level-triggered on other silicon, active until khubd
-         * clears all active port status change bits.  If it's still
-         * set (level-triggered) we must disable it and rely on
-         * polling until khubd re-enables it.
-         */
-        if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) {
-                ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
-                (void) ohci_readl (ohci, &ohci->regs->intrdisable);
-                rhsc_enabled = 0;
-        }
-        hcd->poll_rh = 1;
-
-        /* carry out appropriate state changes */
-        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-
-        case OHCI_USB_OPER:
-                /* keep on polling until we know a device is connected
-                 * and RHSC is enabled */
-                if (!ohci->autostop) {
-                        if (any_connected) {
-                                if (rhsc_enabled)
-                                        hcd->poll_rh = 0;
-                        } else {
-                                ohci->autostop = 1;
-                                ohci->next_statechange = jiffies + HZ;
-                        }
-
-                /* if no devices have been attached for one second, autostop */
-                } else {
-                        if (changed || any_connected) {
-                                ohci->autostop = 0;
-                                ohci->next_statechange = jiffies +
-                                                STATECHANGE_DELAY;
-                        } else if (device_may_wakeup(&hcd->self.root_hub->dev)
-                                        && time_after_eq(jiffies,
-                                                ohci->next_statechange)
-                                        && !ohci->ed_rm_list
-                                        && !(ohci->hc_control &
-                                                OHCI_SCHED_ENABLES)) {
-                                ohci_rh_suspend (ohci, 1);
-                        }
-                }
-                break;
-
-        /* if there is a port change, autostart or ask to be resumed */
-        case OHCI_USB_SUSPEND:
-        case OHCI_USB_RESUME:
-                if (changed) {
-                        if (ohci->autostop)
-                                ohci_rh_resume (ohci);
-                        else
-                                usb_hcd_resume_root_hub (hcd);
-                } else {
-                        /* everything is idle, no need for polling */
-                        hcd->poll_rh = 0;
-                }
-                break;
-        }
+        hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+                        any_connected);
 
 done:
         spin_unlock_irqrestore (&ohci->lock, flags);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 4f95a249c913..a9d7119e3176 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -71,7 +71,7 @@ static int distrust_firmware = 1;
 module_param(distrust_firmware, bool, 0);
 MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
         "t setup");
-DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
 /*
 * u132_module_lock exists to protect access to global variables
 *
@@ -205,13 +205,9 @@ struct u132 {
         struct u132_port port[MAX_U132_PORTS];
         struct u132_endp *endp[MAX_U132_ENDPS];
 };
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data);
-int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 *data);
-int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 data);
+
 /*
-* these can not be inlines because we need the structure offset!!
+* these cannot be inlines because we need the structure offset!!
 * Does anyone have a better way?????
 */
 #define u132_read_pcimem(u132, member, data) \
@@ -3031,7 +3027,7 @@ static struct hc_driver u132_hc_driver = {
 * This function may be called by the USB core whilst the "usb_all_devices_rwsem"
 * is held for writing, thus this module must not call usb_remove_hcd()
 * synchronously - but instead should immediately stop activity to the
-* device and ansynchronously call usb_remove_hcd()
+* device and asynchronously call usb_remove_hcd()
 */
 static int __devexit u132_remove(struct platform_device *pdev)
 {
@@ -3227,7 +3223,7 @@ static int u132_resume(struct platform_device *pdev)
 #define u132_resume NULL
 #endif
 /*
-* this driver is loaded explicitely by ftdi_u132
+* this driver is loaded explicitly by ftdi_u132
 *
 * the platform_driver struct is static because it is per type of module
 */