USB: xhci: Correct Event Handler Busy flag usage.

The Event Handler Busy bit in the event ring dequeue pointer is write 1 to
clear.  Fix the interrupt service routine to clear that bit after the
event handler has run.

xhci_set_hc_event_deq() is designed to update the event ring dequeue pointer
without changing any of the four reserved bits in the lower nibble.  The event
handler busy (EHB) bit is write one to clear, so the new value must always
contain a zero in that bit in order to preserve the EHB value.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 5 insertions, 1 deletions

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 5dd3b1fd71c0..fe9541a89a3d 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -248,8 +248,12 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
         /* Update HC event ring dequeue pointer */
         temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
         temp &= ERST_PTR_MASK;
+        /* Don't clear the EHB bit (which is RW1C) because
+         * there might be more events to service.
+         */
+        temp &= ~ERST_EHB;
         if (!in_interrupt())
-                xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
+                xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
         xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
                         &xhci->ir_set->erst_dequeue);
 }