USB: UHCI: Remove PCI dependencies from uhci-hub

This patch is part of a series that extend the UHCI HCD to support
non-PCI host controllers.

uhci-hub.c contained two PCI vendor checks for silicon quirks. Move
these checks into uhci-hcd.c and use bits in uhci_hcd structure to
mark that we need to use the quirks.

This patch is followed by other patches that will remove PCI
dependencies from uhci-hcd.c as well.

Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 11 insertions, 0 deletions

diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 83344d688ff0..214851a6244f 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -546,6 +546,17 @@ static int uhci_init(struct usb_hcd *hcd)
         }
         uhci->rh_numports = port;
 
+        /* Intel controllers report the OverCurrent bit active on.
+         * VIA controllers report it active off, so we'll adjust the
+         * bit value.  (It's not standardized in the UHCI spec.)
+         */
+        if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+                uhci->oc_low = 1;
+
+        /* HP's server management chip requires a longer port reset delay. */
+        if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP)
+                uhci->wait_for_hp = 1;
+
         /* Kick BIOS off this hardware and reset if the controller
          * isn't already safely quiescent.
          */