USB: ohci whitespace/comment fixups

This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace
(space before tab, at end of line) as well as the obsolete inline changelog.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 43 insertions, 43 deletions

diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index fd93e7eca7bf..405257f3e853 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -1,9 +1,9 @@
 /*
  * OHCI HCD (Host Controller Driver) for USB.
- * 
+ *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * This file is licenced under the GPL.
  */
 
@@ -14,7 +14,7 @@
  */
 typedef __u32 __bitwise __hc32;
 typedef __u16 __bitwise __hc16;
- 
+
 /*
  * OHCI Endpoint Descriptor (ED) ... holds TD queue
  * See OHCI spec, section 4.2
@@ -24,7 +24,7 @@ typedef __u16 __bitwise __hc16;
  */
 struct ed {
         /* first fields are hardware-specified */
-        __hc32                  hwINFO;         /* endpoint config bitmap */
+        __hc32                  hwINFO;      /* endpoint config bitmap */
         /* info bits defined by hcd */
 #define ED_DEQUEUE      (1 << 27)
         /* info bits defined by the hardware */
@@ -52,11 +52,11 @@ struct ed {
          * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
          */
         u8                      state;          /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE         0x00            /* NOT linked to HC */
-#define ED_UNLINK       0x01            /* being unlinked from hc */
+#define ED_IDLE         0x00            /* NOT linked to HC */
+#define ED_UNLINK       0x01            /* being unlinked from hc */
 #define ED_OPER         0x02            /* IS linked to hc */
 
-        u8                      type;           /* PIPE_{BULK,...} */
+        u8                      type;           /* PIPE_{BULK,...} */
 
         /* periodic scheduling params (for intr and iso) */
         u8                      branch;
@@ -70,7 +70,7 @@ struct ed {
 
 #define ED_MASK ((u32)~0x0f)            /* strip hw status in low addr bits */
 
- 
+
 /*
  * OHCI Transfer Descriptor (TD) ... one per transfer segment
  * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
@@ -107,22 +107,22 @@ struct td {
 
         /* (no hwINFO #defines yet for iso tds) */
 
-        __hc32          hwCBP;          /* Current Buffer Pointer (or 0) */
-        __hc32          hwNextTD;       /* Next TD Pointer */
-        __hc32          hwBE;           /* Memory Buffer End Pointer */
+        __hc32          hwCBP;          /* Current Buffer Pointer (or 0) */
+        __hc32          hwNextTD;       /* Next TD Pointer */
+        __hc32          hwBE;           /* Memory Buffer End Pointer */
 
         /* PSW is only for ISO.  Only 1 PSW entry is used, but on
          * big-endian PPC hardware that's the second entry.
          */
 #define MAXPSW  2
-        __hc16          hwPSW [MAXPSW];
+        __hc16          hwPSW [MAXPSW];
 
         /* rest are purely for the driver's use */
-        __u8            index;
-        struct ed       *ed;
-        struct td       *td_hash;       /* dma-->td hashtable */
-        struct td       *next_dl_td;
-        struct urb      *urb;
+        __u8            index;
+        struct ed       *ed;
+        struct td       *td_hash;       /* dma-->td hashtable */
+        struct td       *next_dl_td;
+        struct urb      *urb;
 
         dma_addr_t      td_dma;         /* addr of this TD */
         dma_addr_t      data_dma;       /* addr of data it points to */
@@ -152,8 +152,8 @@ struct td {
 #define TD_NOTACCESSED     0x0F
 
 
-/* map OHCI TD status codes (CC) to errno values */ 
-static const int cc_to_error [16] = { 
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
         /* No  Error  */               0,
         /* CRC Error  */               -EILSEQ,
         /* Bit Stuff  */               -EPROTO,
@@ -169,7 +169,7 @@ static const int cc_to_error [16] = {
         /* BufferOver */               -ECOMM,
         /* BuffUnder  */               -ENOSR,
         /* (for HCD)  */               -EALREADY,
-        /* (for HCD)  */               -EALREADY 
+        /* (for HCD)  */               -EALREADY
 };
 
 
@@ -182,7 +182,7 @@ struct ohci_hcca {
 #define NUM_INTS 32
         __hc32  int_table [NUM_INTS];   /* periodic schedule */
 
-        /* 
+        /*
          * OHCI defines u16 frame_no, followed by u16 zero pad.
          * Since some processors can't do 16 bit bus accesses,
          * portable access must be a 32 bits wide.
@@ -262,10 +262,10 @@ struct ohci_regs {
  * HcCommandStatus (cmdstatus) register masks
  */
 #define OHCI_HCR        (1 << 0)        /* host controller reset */
-#define OHCI_CLF        (1 << 1)        /* control list filled */
-#define OHCI_BLF        (1 << 2)        /* bulk list filled */
-#define OHCI_OCR        (1 << 3)        /* ownership change request */
-#define OHCI_SOC        (3 << 16)       /* scheduling overrun count */
+#define OHCI_CLF        (1 << 1)        /* control list filled */
+#define OHCI_BLF        (1 << 2)        /* bulk list filled */
+#define OHCI_OCR        (1 << 3)        /* ownership change request */
+#define OHCI_SOC        (3 << 16)       /* scheduling overrun count */
 
 /*
  * masks used with interrupt registers:
@@ -285,20 +285,20 @@ struct ohci_regs {
 
 
 /* OHCI ROOT HUB REGISTER MASKS */
- 
+
 /* roothub.portstatus [i] bits */
-#define RH_PS_CCS            0x00000001         /* current connect status */
-#define RH_PS_PES            0x00000002         /* port enable status*/
-#define RH_PS_PSS            0x00000004         /* port suspend status */
-#define RH_PS_POCI           0x00000008         /* port over current indicator */
-#define RH_PS_PRS            0x00000010         /* port reset status */
-#define RH_PS_PPS            0x00000100         /* port power status */
-#define RH_PS_LSDA           0x00000200         /* low speed device attached */
-#define RH_PS_CSC            0x00010000         /* connect status change */
-#define RH_PS_PESC           0x00020000         /* port enable status change */
-#define RH_PS_PSSC           0x00040000         /* port suspend status change */
-#define RH_PS_OCIC           0x00080000         /* over current indicator change */
-#define RH_PS_PRSC           0x00100000         /* port reset status change */
+#define RH_PS_CCS            0x00000001         /* current connect status */
+#define RH_PS_PES            0x00000002         /* port enable status*/
+#define RH_PS_PSS            0x00000004         /* port suspend status */
+#define RH_PS_POCI           0x00000008         /* port over current indicator */
+#define RH_PS_PRS            0x00000010         /* port reset status */
+#define RH_PS_PPS            0x00000100         /* port power status */
+#define RH_PS_LSDA           0x00000200         /* low speed device attached */
+#define RH_PS_CSC            0x00010000         /* connect status change */
+#define RH_PS_PESC           0x00020000         /* port enable status change */
+#define RH_PS_PSSC           0x00040000         /* port suspend status change */
+#define RH_PS_OCIC           0x00080000         /* over current indicator change */
+#define RH_PS_PRSC           0x00100000         /* port reset status change */
 
 /* roothub.status bits */
 #define RH_HS_LPS            0x00000001         /* local power status */
@@ -333,7 +333,7 @@ typedef struct urb_priv {
 } urb_priv_t;
 
 #define TD_HASH_SIZE    64    /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ... 
+// sizeof (struct td) ~= 64 == 2^6 ...
 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
 
 
@@ -364,11 +364,11 @@ struct ohci_hcd {
 
         struct ed               *ed_bulktail;           /* last in bulk list */
         struct ed               *ed_controltail;        /* last in ctrl list */
-        struct ed               *periodic [NUM_INTS];   /* shadow int_table */
+        struct ed               *periodic [NUM_INTS];   /* shadow int_table */
 
         /*
          * OTG controllers and transceivers need software interaction;
-         * other external transceivers should be software-transparent 
+         * other external transceivers should be software-transparent
          */
         struct otg_transceiver  *transceiver;
 
@@ -385,7 +385,7 @@ struct ohci_hcd {
          */
         int                     num_ports;
         int                     load [NUM_INTS];
-        u32                     hc_control;     /* copy of hc control reg */
+        u32                     hc_control;     /* copy of hc control reg */
         unsigned long           next_statechange;       /* suspend/resume */
         u32                     fminterval;             /* saved register */
         unsigned                autostop:1;     /* rh auto stopping/stopped */
@@ -598,7 +598,7 @@ static inline void disable (struct ohci_hcd *ohci)
 }
 
 #define FI                      0x2edf          /* 12000 bits per frame (-1) */
-#define FSMP(fi)                (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FSMP(fi)                (0x7fff & ((6 * ((fi) - 210)) / 7))
 #define FIT                     (1 << 31)
 #define LSTHRESH                0x628           /* lowspeed bit threshold */