Merge branch 'master' into upstream

1 files changed, 77 insertions, 43 deletions

diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c4c4babd4767..9c02177de50a 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -4,7 +4,7 @@
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2005 David Brownell
  * (C) Copyright 2002 Hewlett-Packard Company
- * 
+ *
  * OMAP Bus Glue
  *
  * Modified for OMAP by Tony Lindgren <tony@atomide.com>
@@ -66,15 +66,20 @@ extern int usb_disabled(void);
 extern int ocpi_enable(void);
 
 static struct clk *usb_host_ck;
+static struct clk *usb_dc_ck;
+static int host_enabled;
+static int host_initialized;
 
 static void omap_ohci_clock_power(int on)
 {
         if (on) {
+                clk_enable(usb_dc_ck);
                 clk_enable(usb_host_ck);
                 /* guesstimate for T5 == 1x 32K clock + APLL lock time */
                 udelay(100);
         } else {
                 clk_disable(usb_host_ck);
+                clk_disable(usb_dc_ck);
         }
 }
 
@@ -87,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
         if (on) {
                 if (machine_is_omap_innovator() && cpu_is_omap1510())
                         fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
-                                | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 
+                                | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                                INNOVATOR_FPGA_CAM_USB_CONTROL);
                 else if (machine_is_omap_osk())
                         tps65010_set_gpio_out_value(GPIO1, LOW);
         } else {
                 if (machine_is_omap_innovator() && cpu_is_omap1510())
                         fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
-                                & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), 
+                                & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                                INNOVATOR_FPGA_CAM_USB_CONTROL);
                 else if (machine_is_omap_osk())
                         tps65010_set_gpio_out_value(GPIO1, HIGH);
@@ -103,6 +108,7 @@ static int omap_ohci_transceiver_power(int on)
         return 0;
 }
 
+#ifdef CONFIG_ARCH_OMAP15XX
 /*
  * OMAP-1510 specific Local Bus clock on/off
  */
@@ -121,8 +127,8 @@ static int omap_1510_local_bus_power(int on)
 /*
  * OMAP-1510 specific Local Bus initialization
  * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and 
- *       __dma_to_virt() which need to match with the physical 
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
  *       Local Bus address below.
  */
 static int omap_1510_local_bus_init(void)
@@ -130,7 +136,7 @@ static int omap_1510_local_bus_init(void)
         unsigned int tlb;
         unsigned long lbaddr, physaddr;
 
-        omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, 
+        omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
                OMAP1510_LB_CLOCK_DIV);
 
         /* Configure the Local Bus MMU table */
@@ -138,7 +144,7 @@ static int omap_1510_local_bus_init(void)
                 lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
                 physaddr = tlb * 0x00100000 + PHYS_OFFSET;
                 omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-                omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, 
+                omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
                        OMAP1510_LB_MMU_CAM_L);
                 omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
                 omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
@@ -152,6 +158,10 @@ static int omap_1510_local_bus_init(void)
 
         return 0;
 }
+#else
+#define omap_1510_local_bus_power(x)    {}
+#define omap_1510_local_bus_init()      {}
+#endif
 
 #ifdef  CONFIG_USB_OTG
 
@@ -173,13 +183,14 @@ static void start_hnp(struct ohci_hcd *ohci)
 
 /*-------------------------------------------------------------------------*/
 
-static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
+static int ohci_omap_init(struct usb_hcd *hcd)
 {
-        struct omap_usb_config  *config = pdev->dev.platform_data;
+        struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
+        struct omap_usb_config  *config = hcd->self.controller->platform_data;
         int                     need_transceiver = (config->otg != 0);
         int                     ret;
 
-        dev_dbg(&pdev->dev, "starting USB Controller\n");
+        dev_dbg(hcd->self.controller, "starting USB Controller\n");
 
         if (config->otg) {
                 ohci_to_hcd(ohci)->self.otg_port = config->otg;
@@ -200,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                 if (ohci->transceiver) {
                         int     status = otg_set_host(ohci->transceiver,
                                                 &ohci_to_hcd(ohci)->self);
-                        dev_dbg(&pdev->dev, "init %s transceiver, status %d\n",
+                        dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
                                         ohci->transceiver->label, status);
                         if (status) {
                                 if (ohci->transceiver)
@@ -208,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                                 return status;
                         }
                 } else {
-                        dev_err(&pdev->dev, "can't find transceiver\n");
+                        dev_err(hcd->self.controller, "can't find transceiver\n");
                         return -ENODEV;
                 }
         }
@@ -247,6 +258,10 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
                 }
                 ohci_writel(ohci, rh, &ohci->regs->roothub.a);
                 distrust_firmware = 0;
+        } else if (machine_is_nokia770()) {
+                /* We require a self-powered hub, which should have
+                 * plenty of power. */
+                ohci_to_hcd(ohci)->power_budget = 0;
         }
 
         /* FIXME khubd hub requests should manage power switching */
@@ -260,21 +275,15 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
         return 0;
 }
 
-static void omap_stop_hc(struct platform_device *pdev)
+static void ohci_omap_stop(struct usb_hcd *hcd)
 {
-        dev_dbg(&pdev->dev, "stopping USB Controller\n");
+        dev_dbg(hcd->self.controller, "stopping USB Controller\n");
         omap_ohci_clock_power(0);
 }
 
 
 /*-------------------------------------------------------------------------*/
 
-void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
 /**
  * usb_hcd_omap_probe - initialize OMAP-based HCDs
  * Context: !in_interrupt()
@@ -283,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-int usb_hcd_omap_probe (const struct hc_driver *driver,
+static int usb_hcd_omap_probe (const struct hc_driver *driver,
                           struct platform_device *pdev)
 {
         int retval, irq;
@@ -291,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
         struct ohci_hcd *ohci;
 
         if (pdev->num_resources != 2) {
-                printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", 
+                printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
                        pdev->num_resources);
                 return -ENODEV;
         }
 
-        if (pdev->resource[0].flags != IORESOURCE_MEM 
+        if (pdev->resource[0].flags != IORESOURCE_MEM
                         || pdev->resource[1].flags != IORESOURCE_IRQ) {
                 printk(KERN_ERR "hcd probe: invalid resource type\n");
                 return -ENODEV;
@@ -306,6 +315,17 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
         if (IS_ERR(usb_host_ck))
                 return PTR_ERR(usb_host_ck);
 
+        if (!cpu_is_omap1510())
+                usb_dc_ck = clk_get(0, "usb_dc_ck");
+        else
+                usb_dc_ck = clk_get(0, "lb_ck");
+
+        if (IS_ERR(usb_dc_ck)) {
+                clk_put(usb_host_ck);
+                return PTR_ERR(usb_dc_ck);
+        }
+
+
         hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
         if (!hcd) {
                 retval = -ENOMEM;
@@ -325,9 +345,8 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
         ohci = hcd_to_ohci(hcd);
         ohci_hcd_init(ohci);
 
-        retval = omap_start_hc(ohci, pdev);
-        if (retval < 0)
-                goto err2;
+        host_initialized = 0;
+        host_enabled = 1;
 
         irq = platform_get_irq(pdev, 0);
         if (irq < 0) {
@@ -335,15 +354,21 @@ int usb_hcd_omap_probe (const struct hc_driver *driver,
                 goto err2;
         }
         retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-        if (retval == 0)
-                return retval;
+        if (retval)
+                goto err2;
+
+        host_initialized = 1;
+
+        if (!host_enabled)
+                omap_ohci_clock_power(0);
 
-        omap_stop_hc(pdev);
+        return 0;
 err2:
         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err1:
         usb_put_hcd(hcd);
 err0:
+        clk_put(usb_dc_ck);
         clk_put(usb_host_ck);
         return retval;
 }
@@ -359,31 +384,41 @@ err0:
  * Reverses the effect of usb_hcd_omap_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
  * context, normally "rmmod", "apmd", or something similar.
- *
  */
-void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static inline void
+usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
+        struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
+
         usb_remove_hcd(hcd);
+        if (ohci->transceiver) {
+                (void) otg_set_host(ohci->transceiver, 0);
+                put_device(ohci->transceiver->dev);
+        }
         if (machine_is_omap_osk())
                 omap_free_gpio(9);
-        omap_stop_hc(pdev);
         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
         usb_put_hcd(hcd);
+        clk_put(usb_dc_ck);
         clk_put(usb_host_ck);
 }
 
 /*-------------------------------------------------------------------------*/
 
-static int __devinit
+static int
 ohci_omap_start (struct usb_hcd *hcd)
 {
         struct omap_usb_config *config;
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
         int             ret;
 
+        if (!host_enabled)
+                return 0;
         config = hcd->self.controller->platform_data;
-        if (config->otg || config->rwc)
+        if (config->otg || config->rwc) {
+                ohci->hc_control = OHCI_CTRL_RWC;
                 writel(OHCI_CTRL_RWC, &ohci->regs->control);
+        }
 
         if ((ret = ohci_run (ohci)) < 0) {
                 dev_err(hcd->self.controller, "can't start\n");
@@ -409,8 +444,10 @@ static const struct hc_driver ohci_omap_hc_driver = {
         /*
          * basic lifecycle operations
          */
+        .reset =                ohci_omap_init,
         .start =                ohci_omap_start,
-        .stop =                 ohci_stop,
+        .stop =                 ohci_omap_stop,
+        .shutdown =             ohci_shutdown,
 
         /*
          * managing i/o requests and associated device resources
@@ -429,6 +466,7 @@ static const struct hc_driver ohci_omap_hc_driver = {
          */
         .hub_status_data =      ohci_hub_status_data,
         .hub_control =          ohci_hub_control,
+        .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef  CONFIG_PM
         .bus_suspend =          ohci_bus_suspend,
         .bus_resume =           ohci_bus_resume,
@@ -446,13 +484,8 @@ static int ohci_hcd_omap_drv_probe(struct platform_device *dev)
 static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
 {
         struct usb_hcd          *hcd = platform_get_drvdata(dev);
-        struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 
         usb_hcd_omap_remove(hcd, dev);
-        if (ohci->transceiver) {
-                (void) otg_set_host(ohci->transceiver, 0);
-                put_device(ohci->transceiver->dev);
-        }
         platform_set_drvdata(dev, NULL);
 
         return 0;
@@ -472,7 +505,7 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
 
         omap_ohci_clock_power(0);
         ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
-        dev->power.power_state = PMSG_SUSPEND;
+        dev->dev.power.power_state = PMSG_SUSPEND;
         return 0;
 }
 
@@ -485,8 +518,8 @@ static int ohci_omap_resume(struct platform_device *dev)
         ohci->next_statechange = jiffies;
 
         omap_ohci_clock_power(1);
-        dev->power.power_state = PMSG_ON;
-        usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+        dev->dev.power.power_state = PMSG_ON;
+        usb_hcd_resume_root_hub(platform_get_drvdata(dev));
         return 0;
 }
 
@@ -500,6 +533,7 @@ static int ohci_omap_resume(struct platform_device *dev)
 static struct platform_driver ohci_hcd_omap_driver = {
         .probe          = ohci_hcd_omap_drv_probe,
         .remove         = ohci_hcd_omap_drv_remove,
+        .shutdown       = usb_hcd_platform_shutdown,
 #ifdef  CONFIG_PM
         .suspend        = ohci_omap_suspend,
         .resume         = ohci_omap_resume,