Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  + sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 195 insertions, 181 deletions

diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 10bb3ea276f9..99ae5ea3f8d1 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/usb_phy.h>
 #include <mach/iomap.h>
@@ -37,9 +38,7 @@ struct tegra_ehci_hcd {
         struct clk *emc_clk;
         struct usb_phy *transceiver;
         int host_resumed;
-        int bus_suspended;
         int port_resuming;
-        int power_down_on_bus_suspend;
         enum tegra_usb_phy_port_speed port_speed;
 };
 
@@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd)
         up_write(&ehci_cf_port_reset_rwsem);
 }
 
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        struct ehci_regs __iomem *hw = tegra->ehci->regs;
-        unsigned long flags;
-
-        spin_lock_irqsave(&tegra->ehci->lock, flags);
-
-        tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
-        ehci_halt(tegra->ehci);
-        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-        spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
-        tegra_ehci_power_down(hcd);
-        return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        struct ehci_regs __iomem *hw = ehci->regs;
-        unsigned long val;
-
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-        tegra_ehci_power_up(hcd);
-
-        if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
-                /* Wait for the phy to detect new devices
-                 * before we restart the controller */
-                msleep(10);
-                goto restart;
-        }
-
-        /* Force the phy to keep data lines in suspend state */
-        tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
-        /* Enable host mode */
-        tdi_reset(ehci);
-
-        /* Enable Port Power */
-        val = readl(&hw->port_status[0]);
-        val |= PORT_POWER;
-        writel(val, &hw->port_status[0]);
-        udelay(10);
-
-        /* Check if the phy resume from LP0. When the phy resume from LP0
-         * USB register will be reset. */
-        if (!readl(&hw->async_next)) {
-                /* Program the field PTC based on the saved speed mode */
-                val = readl(&hw->port_status[0]);
-                val &= ~PORT_TEST(~0);
-                if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
-                        val |= PORT_TEST_FORCE;
-                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
-                        val |= PORT_TEST(6);
-                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
-                        val |= PORT_TEST(7);
-                writel(val, &hw->port_status[0]);
-                udelay(10);
-
-                /* Disable test mode by setting PTC field to NORMAL_OP */
-                val = readl(&hw->port_status[0]);
-                val &= ~PORT_TEST(~0);
-                writel(val, &hw->port_status[0]);
-                udelay(10);
-        }
-
-        /* Poll until CCS is enabled */
-        if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
-                                                 PORT_CONNECT, 2000)) {
-                pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
-                goto restart;
-        }
-
-        /* Poll until PE is enabled */
-        if (handshake(ehci, &hw->port_status[0], PORT_PE,
-                                                 PORT_PE, 2000)) {
-                pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
-                goto restart;
-        }
-
-        /* Clear the PCI status, to avoid an interrupt taken upon resume */
-        val = readl(&hw->status);
-        val |= STS_PCD;
-        writel(val, &hw->status);
-
-        /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
-        val = readl(&hw->port_status[0]);
-        if ((val & PORT_POWER) && (val & PORT_PE)) {
-                val |= PORT_SUSPEND;
-                writel(val, &hw->port_status[0]);
-
-                /* Wait until port suspend completes */
-                if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
-                                                         PORT_SUSPEND, 1000)) {
-                        pr_err("%s: timeout waiting for PORT_SUSPEND\n",
-                                                                __func__);
-                        goto restart;
-                }
-        }
-
-        tegra_ehci_phy_restore_end(tegra->phy);
-        return 0;
-
-restart:
-        if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
-                tegra_ehci_phy_restore_end(tegra->phy);
-
-        tegra_ehci_restart(hcd);
-        return 0;
-}
-
 static void tegra_ehci_shutdown(struct usb_hcd *hcd)
 {
         struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
@@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
         return retval;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        int error_status = 0;
-
-        error_status = ehci_bus_suspend(hcd);
-        if (!error_status && tegra->power_down_on_bus_suspend) {
-                tegra_usb_suspend(hcd);
-                tegra->bus_suspended = 1;
-        }
-
-        return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
-        if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
-                tegra_usb_resume(hcd);
-                tegra->bus_suspended = 0;
-        }
-
-        tegra_usb_phy_preresume(tegra->phy);
-        tegra->port_resuming = 1;
-        return ehci_bus_resume(hcd);
-}
-#endif
-
 struct temp_buffer {
         void *kmalloc_ptr;
         void *old_xfer_buffer;
@@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
         .hub_control            = tegra_ehci_hub_control,
         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 #ifdef CONFIG_PM
-        .bus_suspend            = tegra_ehci_bus_suspend,
-        .bus_resume             = tegra_ehci_bus_resume,
+        .bus_suspend            = ehci_bus_suspend,
+        .bus_resume             = ehci_bus_resume,
 #endif
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
@@ -604,11 +459,187 @@ static int setup_vbus_gpio(struct platform_device *pdev,
                 dev_err(&pdev->dev, "can't enable vbus\n");
                 return err;
         }
-        gpio_set_value(gpio, 1);
 
         return err;
 }
 
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct ehci_hcd *ehci = tegra->ehci;
+        struct usb_hcd *hcd = ehci_to_hcd(ehci);
+        struct ehci_regs __iomem *hw = ehci->regs;
+        unsigned long flags;
+
+        if (time_before(jiffies, ehci->next_statechange))
+                msleep(10);
+
+        spin_lock_irqsave(&ehci->lock, flags);
+
+        tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+        ehci_halt(ehci);
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+        spin_unlock_irqrestore(&ehci->lock, flags);
+
+        tegra_ehci_power_down(hcd);
+        return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct ehci_hcd *ehci = tegra->ehci;
+        struct usb_hcd *hcd = ehci_to_hcd(ehci);
+        struct ehci_regs __iomem *hw = ehci->regs;
+        unsigned long val;
+
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+        tegra_ehci_power_up(hcd);
+
+        if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+                /* Wait for the phy to detect new devices
+                 * before we restart the controller */
+                msleep(10);
+                goto restart;
+        }
+
+        /* Force the phy to keep data lines in suspend state */
+        tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+        /* Enable host mode */
+        tdi_reset(ehci);
+
+        /* Enable Port Power */
+        val = readl(&hw->port_status[0]);
+        val |= PORT_POWER;
+        writel(val, &hw->port_status[0]);
+        udelay(10);
+
+        /* Check if the phy resume from LP0. When the phy resume from LP0
+         * USB register will be reset. */
+        if (!readl(&hw->async_next)) {
+                /* Program the field PTC based on the saved speed mode */
+                val = readl(&hw->port_status[0]);
+                val &= ~PORT_TEST(~0);
+                if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+                        val |= PORT_TEST_FORCE;
+                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+                        val |= PORT_TEST(6);
+                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+                        val |= PORT_TEST(7);
+                writel(val, &hw->port_status[0]);
+                udelay(10);
+
+                /* Disable test mode by setting PTC field to NORMAL_OP */
+                val = readl(&hw->port_status[0]);
+                val &= ~PORT_TEST(~0);
+                writel(val, &hw->port_status[0]);
+                udelay(10);
+        }
+
+        /* Poll until CCS is enabled */
+        if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+                                                 PORT_CONNECT, 2000)) {
+                pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+                goto restart;
+        }
+
+        /* Poll until PE is enabled */
+        if (handshake(ehci, &hw->port_status[0], PORT_PE,
+                                                 PORT_PE, 2000)) {
+                pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+                goto restart;
+        }
+
+        /* Clear the PCI status, to avoid an interrupt taken upon resume */
+        val = readl(&hw->status);
+        val |= STS_PCD;
+        writel(val, &hw->status);
+
+        /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+        val = readl(&hw->port_status[0]);
+        if ((val & PORT_POWER) && (val & PORT_PE)) {
+                val |= PORT_SUSPEND;
+                writel(val, &hw->port_status[0]);
+
+                /* Wait until port suspend completes */
+                if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+                                                         PORT_SUSPEND, 1000)) {
+                        pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+                                                                __func__);
+                        goto restart;
+                }
+        }
+
+        tegra_ehci_phy_restore_end(tegra->phy);
+        goto done;
+
+ restart:
+        if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+                tegra_ehci_phy_restore_end(tegra->phy);
+
+        tegra_ehci_restart(hcd);
+
+ done:
+        tegra_usb_phy_preresume(tegra->phy);
+        tegra->port_resuming = 1;
+        return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+        int rc = 0;
+
+        /*
+         * When system sleep is supported and USB controller wakeup is
+         * implemented: If the controller is runtime-suspended and the
+         * wakeup setting needs to be changed, call pm_runtime_resume().
+         */
+        if (HCD_HW_ACCESSIBLE(hcd))
+                rc = controller_suspend(dev);
+        return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+        int rc;
+
+        rc = controller_resume(dev);
+        if (rc == 0) {
+                pm_runtime_disable(dev);
+                pm_runtime_set_active(dev);
+                pm_runtime_enable(dev);
+        }
+        return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+        return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+        return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+        .suspend        = tegra_ehci_suspend,
+        .resume         = tegra_ehci_resume,
+        .runtime_suspend = tegra_ehci_runtime_suspend,
+        .runtime_resume = tegra_ehci_runtime_resume,
+};
+
+#endif
+
 static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
 
 static int tegra_ehci_probe(struct platform_device *pdev)
@@ -724,7 +755,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
         }
 
         tegra->host_resumed = 1;
-        tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
         tegra->ehci = hcd_to_ehci(hcd);
 
         irq = platform_get_irq(pdev, 0);
@@ -748,6 +778,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
                 goto fail;
         }
 
+        pm_runtime_set_active(&pdev->dev);
+        pm_runtime_get_noresume(&pdev->dev);
+
+        /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+        /* if (!pdata->power_down_on_bus_suspend) */
+                pm_runtime_forbid(&pdev->dev);
+        pm_runtime_enable(&pdev->dev);
+        pm_runtime_put_sync(&pdev->dev);
         return err;
 
 fail:
@@ -774,33 +812,6 @@ fail_hcd:
         return err;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
-        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-        if (tegra->bus_suspended)
-                return 0;
-
-        return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-        if (tegra->bus_suspended)
-                return 0;
-
-        if (time_before(jiffies, tegra->ehci->next_statechange))
-                msleep(10);
-
-        return tegra_usb_suspend(hcd);
-}
-#endif
-
 static int tegra_ehci_remove(struct platform_device *pdev)
 {
         struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
@@ -809,6 +820,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
         if (tegra == NULL || hcd == NULL)
                 return -EINVAL;
 
+        pm_runtime_get_sync(&pdev->dev);
+        pm_runtime_disable(&pdev->dev);
+        pm_runtime_put_noidle(&pdev->dev);
+
 #ifdef CONFIG_USB_OTG_UTILS
         if (tegra->transceiver) {
                 otg_set_host(tegra->transceiver->otg, NULL);
@@ -849,13 +864,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
 static struct platform_driver tegra_ehci_driver = {
         .probe          = tegra_ehci_probe,
         .remove         = tegra_ehci_remove,
-#ifdef CONFIG_PM
-        .suspend        = tegra_ehci_suspend,
-        .resume         = tegra_ehci_resume,
-#endif
         .shutdown       = tegra_ehci_hcd_shutdown,
         .driver         = {
                 .name   = "tegra-ehci",
                 .of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+                .pm     = &tegra_ehci_pm_ops,
+#endif
         }
 };