USB: EHCI, OHCI: handover changes

This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss
of VBUS power during suspend.  In order for the USB-persist facility
to work correctly, it is necessary for low- and full-speed devices
attached to a high-speed port to be handed back to the companion
controller during resume processing.

This entails three changes: adding code to ehci-hcd to perform the
handover, removing code from ohci-hcd to turn off ports during
root-hub reinit, and adding code to ohci-hcd to turn on ports during
PCI controller resume.  (Other bus glue resume methods for platforms
supporting high-speed controllers would need a similar change, if any
existed.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 4 insertions, 3 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 966965f72338..a7816e392a85 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -312,13 +312,14 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
         ehci_work(ehci);
         spin_unlock_irq(&ehci->lock);
 
-        /* here we "know" root ports should always stay powered */
-        ehci_port_power(ehci, 1);
-
         ehci_writel(ehci, ehci->command, &ehci->regs->command);
         ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
         ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
 
+        /* here we "know" root ports should always stay powered */
+        ehci_port_power(ehci, 1);
+        ehci_handover_companion_ports(ehci);
+
         hcd->state = HC_STATE_SUSPENDED;
         return 0;
 }