Merge branch 'usb-next' into musb-merge

* usb-next: (132 commits)
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  usb: gadget: f_ncm.c added
  usb: gadget: u_ether: prepare for NCM
  usb: pch_udc: Fix setup transfers with data out
  usb: pch_udc: Fix compile error, warnings and checkpatch warnings
  usb: add ab8500 usb transceiver driver
  USB: gadget: Implement runtime PM for MSM bus glue driver
  USB: gadget: Implement runtime PM for ci13xxx gadget
  USB: gadget: Add USB controller driver for MSM SoC
  USB: gadget: Introduce ci13xxx_udc_driver struct
  USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask
  USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc
  USB: gadget: Separate out PCI bus code from ci13xxx_udc
  ...

1 files changed, 242 insertions, 68 deletions

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 116ae280053a..0374eb47f09b 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,11 +1,12 @@
 /*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
  *      Author: Vikram Pandita <vikram.pandita@ti.com>
+ *      Author: Anand Gadiyar <gadiyar@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *      Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
  *      - add kernel-doc
  *      - enable AUTOIDLE
  *      - add suspend/resume
  *      - move workarounds to board-files
+ *      - factor out code common to OHCI
+ *      - add HSIC and TLL support
+ *      - convert to use hwmod and runtime PM
  */
 
 #include <linux/platform_device.h>
@@ -114,6 +118,23 @@
 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
 
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR                             (3 << 16)
+#define OMAP4_P1_MODE_TLL                               (1 << 16)
+#define OMAP4_P1_MODE_HSIC                              (3 << 16)
+#define OMAP4_P2_MODE_CLEAR                             (3 << 18)
+#define OMAP4_P2_MODE_TLL                               (1 << 18)
+#define OMAP4_P2_MODE_HSIC                              (3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT                     2
+
 #define OMAP_UHH_DEBUG_CSR                              (0x44)
 
 /* EHCI Register Set */
@@ -127,6 +148,17 @@
 #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT             8
 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT                0
 
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1  0x00000010      /* OMAP3 */
+#define OMAP_EHCI_REV2  0x50700100      /* OMAP4 */
+
+#define is_omap_ehci_rev1(x)    (x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x)    (x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x)     (x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x)     (x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x)    (x == EHCI_HCD_OMAP_MODE_HSIC)
+
 /*-------------------------------------------------------------------------*/
 
 static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
         struct device           *dev;
 
         struct clk              *usbhost_ick;
-        struct clk              *usbhost2_120m_fck;
-        struct clk              *usbhost1_48m_fck;
+        struct clk              *usbhost_hs_fck;
+        struct clk              *usbhost_fs_fck;
         struct clk              *usbtll_fck;
         struct clk              *usbtll_ick;
+        struct clk              *xclk60mhsp1_ck;
+        struct clk              *xclk60mhsp2_ck;
+        struct clk              *utmi_p1_fck;
+        struct clk              *utmi_p2_fck;
 
         /* FIXME the following two workarounds are
          * board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
         /* phy reset workaround */
         int                     phy_reset;
 
+        /* IP revision */
+        u32                     omap_ehci_rev;
+
         /* desired phy_mode: TLL, PHY */
         enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
 
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
 
 /*-------------------------------------------------------------------------*/
 
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+                                u8 tll_channel_count)
 {
         unsigned reg;
         int i;
 
         /* Program the 3 TLL channels upfront */
-        for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+        for (i = 0; i < tll_channel_count; i++) {
                 reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
                 /* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
         ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
 
         /* Enable channels now */
-        for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+        for (i = 0; i < tll_channel_count; i++) {
                 reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
                 /* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         }
         clk_enable(omap->usbhost_ick);
 
-        omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
-        if (IS_ERR(omap->usbhost2_120m_fck)) {
-                ret = PTR_ERR(omap->usbhost2_120m_fck);
+        omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+        if (IS_ERR(omap->usbhost_hs_fck)) {
+                ret = PTR_ERR(omap->usbhost_hs_fck);
                 goto err_host_120m_fck;
         }
-        clk_enable(omap->usbhost2_120m_fck);
+        clk_enable(omap->usbhost_hs_fck);
 
-        omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
-        if (IS_ERR(omap->usbhost1_48m_fck)) {
-                ret = PTR_ERR(omap->usbhost1_48m_fck);
+        omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+        if (IS_ERR(omap->usbhost_fs_fck)) {
+                ret = PTR_ERR(omap->usbhost_fs_fck);
                 goto err_host_48m_fck;
         }
-        clk_enable(omap->usbhost1_48m_fck);
+        clk_enable(omap->usbhost_fs_fck);
 
         if (omap->phy_reset) {
                 /* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         }
         clk_enable(omap->usbtll_ick);
 
+        omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+                                                OMAP_UHH_REVISION);
+        dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+                                        omap->omap_ehci_rev);
+
+        /*
+         * Enable per-port clocks as needed (newer controllers only).
+         * - External ULPI clock for PHY mode
+         * - Internal clocks for TLL and HSIC modes (TODO)
+         */
+        if (is_omap_ehci_rev2(omap)) {
+                switch (omap->port_mode[0]) {
+                case EHCI_HCD_OMAP_MODE_PHY:
+                        omap->xclk60mhsp1_ck = clk_get(omap->dev,
+                                                        "xclk60mhsp1_ck");
+                        if (IS_ERR(omap->xclk60mhsp1_ck)) {
+                                ret = PTR_ERR(omap->xclk60mhsp1_ck);
+                                dev_err(omap->dev,
+                                        "Unable to get Port1 ULPI clock\n");
+                        }
+
+                        omap->utmi_p1_fck = clk_get(omap->dev,
+                                                        "utmi_p1_gfclk");
+                        if (IS_ERR(omap->utmi_p1_fck)) {
+                                ret = PTR_ERR(omap->utmi_p1_fck);
+                                dev_err(omap->dev,
+                                        "Unable to get utmi_p1_fck\n");
+                        }
+
+                        ret = clk_set_parent(omap->utmi_p1_fck,
+                                                omap->xclk60mhsp1_ck);
+                        if (ret != 0) {
+                                dev_err(omap->dev,
+                                        "Unable to set P1 f-clock\n");
+                        }
+                        break;
+                case EHCI_HCD_OMAP_MODE_TLL:
+                        /* TODO */
+                default:
+                        break;
+                }
+                switch (omap->port_mode[1]) {
+                case EHCI_HCD_OMAP_MODE_PHY:
+                        omap->xclk60mhsp2_ck = clk_get(omap->dev,
+                                                        "xclk60mhsp2_ck");
+                        if (IS_ERR(omap->xclk60mhsp2_ck)) {
+                                ret = PTR_ERR(omap->xclk60mhsp2_ck);
+                                dev_err(omap->dev,
+                                        "Unable to get Port2 ULPI clock\n");
+                        }
+
+                        omap->utmi_p2_fck = clk_get(omap->dev,
+                                                        "utmi_p2_gfclk");
+                        if (IS_ERR(omap->utmi_p2_fck)) {
+                                ret = PTR_ERR(omap->utmi_p2_fck);
+                                dev_err(omap->dev,
+                                        "Unable to get utmi_p2_fck\n");
+                        }
+
+                        ret = clk_set_parent(omap->utmi_p2_fck,
+                                                omap->xclk60mhsp2_ck);
+                        if (ret != 0) {
+                                dev_err(omap->dev,
+                                        "Unable to set P2 f-clock\n");
+                        }
+                        break;
+                case EHCI_HCD_OMAP_MODE_TLL:
+                        /* TODO */
+                default:
+                        break;
+                }
+        }
+
+
         /* perform TLL soft reset, and wait until reset is complete */
         ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
                         OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
         /* Put UHH in NoIdle/NoStandby mode */
         reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-        reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-                        | OMAP_UHH_SYSCONFIG_SIDLEMODE
-                        | OMAP_UHH_SYSCONFIG_CACTIVITY
-                        | OMAP_UHH_SYSCONFIG_MIDLEMODE);
-        reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+        if (is_omap_ehci_rev1(omap)) {
+                reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+                                | OMAP_UHH_SYSCONFIG_SIDLEMODE
+                                | OMAP_UHH_SYSCONFIG_CACTIVITY
+                                | OMAP_UHH_SYSCONFIG_MIDLEMODE);
+                reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
 
+        } else if (is_omap_ehci_rev2(omap)) {
+                reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+                reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+                reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+                reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+        }
         ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
 
         reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,40 +498,56 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                         | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
         reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
-        if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-                reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-        if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-                reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-        if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-                reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-        /* Bypass the TLL module for PHY mode operation */
-        if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
-                dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-                if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
-                        (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
-                                (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
-                        reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-                else
-                        reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-        } else {
-                dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-                if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
-                        reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-                else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
-                        reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
-                if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
-                        reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-                else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
-                        reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
-                if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
-                        reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-                else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
-                        reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+        if (is_omap_ehci_rev1(omap)) {
+                if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                        reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+                if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                        reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+                if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                        reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+                /* Bypass the TLL module for PHY mode operation */
+                if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+                        dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+                        if (is_ehci_phy_mode(omap->port_mode[0]) ||
+                                is_ehci_phy_mode(omap->port_mode[1]) ||
+                                        is_ehci_phy_mode(omap->port_mode[2]))
+                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+                        else
+                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+                } else {
+                        dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+                        if (is_ehci_phy_mode(omap->port_mode[0]))
+                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+                        else if (is_ehci_tll_mode(omap->port_mode[0]))
+                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+                        if (is_ehci_phy_mode(omap->port_mode[1]))
+                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+                        else if (is_ehci_tll_mode(omap->port_mode[1]))
+                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+                        if (is_ehci_phy_mode(omap->port_mode[2]))
+                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+                        else if (is_ehci_tll_mode(omap->port_mode[2]))
+                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+                }
+        } else if (is_omap_ehci_rev2(omap)) {
+                /* Clear port mode fields for PHY mode*/
+                reg &= ~OMAP4_P1_MODE_CLEAR;
+                reg &= ~OMAP4_P2_MODE_CLEAR;
+
+                if (is_ehci_tll_mode(omap->port_mode[0]))
+                        reg |= OMAP4_P1_MODE_TLL;
+                else if (is_ehci_hsic_mode(omap->port_mode[0]))
+                        reg |= OMAP4_P1_MODE_HSIC;
 
+                if (is_ehci_tll_mode(omap->port_mode[1]))
+                        reg |= OMAP4_P2_MODE_TLL;
+                else if (is_ehci_hsic_mode(omap->port_mode[1]))
+                        reg |= OMAP4_P2_MODE_HSIC;
         }
+
         ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
         dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                         tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
                 /* Enable UTMI mode for required TLL channels */
-                omap_usb_utmi_init(omap, tll_ch_mask);
+                omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
         }
 
         if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         return 0;
 
 err_sys_status:
+        clk_disable(omap->utmi_p2_fck);
+        clk_put(omap->utmi_p2_fck);
+        clk_disable(omap->xclk60mhsp2_ck);
+        clk_put(omap->xclk60mhsp2_ck);
+        clk_disable(omap->utmi_p1_fck);
+        clk_put(omap->utmi_p1_fck);
+        clk_disable(omap->xclk60mhsp1_ck);
+        clk_put(omap->xclk60mhsp1_ck);
         clk_disable(omap->usbtll_ick);
         clk_put(omap->usbtll_ick);
 
@@ -472,8 +618,8 @@ err_tll_ick:
         clk_put(omap->usbtll_fck);
 
 err_tll_fck:
-        clk_disable(omap->usbhost1_48m_fck);
-        clk_put(omap->usbhost1_48m_fck);
+        clk_disable(omap->usbhost_fs_fck);
+        clk_put(omap->usbhost_fs_fck);
 
         if (omap->phy_reset) {
                 if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ err_tll_fck:
         }
 
 err_host_48m_fck:
-        clk_disable(omap->usbhost2_120m_fck);
-        clk_put(omap->usbhost2_120m_fck);
+        clk_disable(omap->usbhost_hs_fck);
+        clk_put(omap->usbhost_hs_fck);
 
 err_host_120m_fck:
         clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
         /* Reset OMAP modules for insmod/rmmod to work */
         ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+                        is_omap_ehci_rev2(omap) ?
+                        OMAP4_UHH_SYSCONFIG_SOFTRESET :
                         OMAP_UHH_SYSCONFIG_SOFTRESET);
         while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
                                 & (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                 omap->usbhost_ick = NULL;
         }
 
-        if (omap->usbhost1_48m_fck != NULL) {
-                clk_disable(omap->usbhost1_48m_fck);
-                clk_put(omap->usbhost1_48m_fck);
-                omap->usbhost1_48m_fck = NULL;
+        if (omap->usbhost_fs_fck != NULL) {
+                clk_disable(omap->usbhost_fs_fck);
+                clk_put(omap->usbhost_fs_fck);
+                omap->usbhost_fs_fck = NULL;
         }
 
-        if (omap->usbhost2_120m_fck != NULL) {
-                clk_disable(omap->usbhost2_120m_fck);
-                clk_put(omap->usbhost2_120m_fck);
-                omap->usbhost2_120m_fck = NULL;
+        if (omap->usbhost_hs_fck != NULL) {
+                clk_disable(omap->usbhost_hs_fck);
+                clk_put(omap->usbhost_hs_fck);
+                omap->usbhost_hs_fck = NULL;
         }
 
         if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                 omap->usbtll_ick = NULL;
         }
 
+        if (is_omap_ehci_rev2(omap)) {
+                if (omap->xclk60mhsp1_ck != NULL) {
+                        clk_disable(omap->xclk60mhsp1_ck);
+                        clk_put(omap->xclk60mhsp1_ck);
+                        omap->xclk60mhsp1_ck = NULL;
+                }
+
+                if (omap->utmi_p1_fck != NULL) {
+                        clk_disable(omap->utmi_p1_fck);
+                        clk_put(omap->utmi_p1_fck);
+                        omap->utmi_p1_fck = NULL;
+                }
+
+                if (omap->xclk60mhsp2_ck != NULL) {
+                        clk_disable(omap->xclk60mhsp2_ck);
+                        clk_put(omap->xclk60mhsp2_ck);
+                        omap->xclk60mhsp2_ck = NULL;
+                }
+
+                if (omap->utmi_p2_fck != NULL) {
+                        clk_disable(omap->utmi_p2_fck);
+                        clk_put(omap->utmi_p2_fck);
+                        omap->utmi_p2_fck = NULL;
+                }
+        }
+
         if (omap->phy_reset) {
                 if (gpio_is_valid(omap->reset_gpio_port[0]))
                         gpio_free(omap->reset_gpio_port[0]);