USB: fix occasional ULPI timeouts with ehci-mxc

On various mxc boards, the intial ULPI reads resulted in a timeout
which prevented the transceiver to be identified and thus the ehci
device to be probed.

Initializing the hardware lines connected to the transceiver (through
pdata->init call) before actually enabling clocks and configuring
registers in the devices fixes this problem.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 11 insertions, 12 deletions

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 35c56f40bdbb..23cd917088b4 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -162,6 +162,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
                 goto err_ioremap;
         }
 
+        /* call platform specific init function */
+        if (pdata->init) {
+                ret = pdata->init(pdev);
+                if (ret) {
+                        dev_err(dev, "platform init failed\n");
+                        goto err_init;
+                }
+                /* platforms need some time to settle changed IO settings */
+                mdelay(10);
+        }
+
         /* enable clocks */
         priv->usbclk = clk_get(dev, "usb");
         if (IS_ERR(priv->usbclk)) {
@@ -192,18 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
         if (ret < 0)
                 goto err_init;
 
-        /* call platform specific init function */
-        if (pdata->init) {
-                ret = pdata->init(pdev);
-                if (ret) {
-                        dev_err(dev, "platform init failed\n");
-                        goto err_init;
-                }
-        }
-
-        /* most platforms need some time to settle changed IO settings */
-        mdelay(10);
-
         /* Initialize the transceiver */
         if (pdata->otg) {
                 pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;