USB: Driver for Freescale QUICC Engine USB Host Controller

This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.

Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.

This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20787e4..f163571e33d8 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y)
 endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+             fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
 
 obj-$(CONFIG_USB_WHCI_HCD)      += whci/
 
@@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)   += isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)      += ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)      += uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)      += fhci.o
 obj-$(CONFIG_USB_SL811_HCD)     += sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)      += sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)      += u132-hcd.o