usb: host: Add EHCI driver for NVIDIA Tegra SoCs

The Tegra 2 SoC has 3 EHCI compatible USB controllers. This patch adds
the necessary glue to allow the ehci-hcd driver to work on Tegra 2
SoCs.

The platform data is used to configure board-specific phy settings and
to configure the operating mode, as one of the ports may be used as a otg
port. For additional power saving, the driver supports powering down the
phy on bus suspend when it is used, for example, to connect an internal
device that use an out-of-band remote wakeup mechanism (e.g. a gpio).

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 8 insertions, 0 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b5a908eacb82..9483acdf2e9e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -165,6 +165,14 @@ config USB_EHCI_MSM
           This driver is not supported on boards like trout which
           has an external PHY.
 
+config USB_EHCI_TEGRA
+       boolean "NVIDIA Tegra HCD support"
+       depends on USB_EHCI_HCD && ARCH_TEGRA
+       select USB_EHCI_ROOT_HUB_TT
+       help
+         This driver enables support for the internal USB Host Controllers
+         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+
 config USB_EHCI_HCD_PPC_OF
         bool "EHCI support for PPC USB controller on OF platform bus"
         depends on USB_EHCI_HCD && PPC_OF