USB: pxa27x_udc: add vbus session handling

On vbus_session() call, optionally activate D+ pullup
resistor and enable the udc, or deactivate D+ pullup
resistor and disable the udc.

It is intentional to not handle any VBus sense related irq.
An external transceiver driver (like gpio_vbus) should
catch VBus sense signal, and call usb_gadget_vbus_connect()
or usb_gadget_vbus_disconnect().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 6f5234dff8a5..64741e199204 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -456,6 +456,7 @@ struct pxa_udc {
         unsigned                                enabled:1;
         unsigned                                pullup_on:1;
         unsigned                                pullup_resume:1;
+        unsigned                                vbus_sensed:1;
         unsigned                                config:2;
         unsigned                                last_interface:3;
         unsigned                                last_alternate:3;