USB: pxa27x_udc: compatibility with pxa320 SoC

Got pxa27x_udc working on the pxa320 Nomad platform.  The
problem was that the pxa3xx UDC is not quite compatible with
the pxa27x UDC in how it handles back-to-back control
packets.  The pxa27x probably drops them by default, but the
pxa320 does not, and you have to detect it and set the OPC
bit to clear the zero-length packet.

Signed-off-by: Aric Blumer <aric@sdgsystems.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 12 insertions, 1 deletions

diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index ffe6e0afc2ee..51790b06b8ca 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1892,6 +1892,15 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 
         nuke(ep, -EPROTO);
 
+        /*
+         * In the PXA320 manual, in the section about Back-to-Back setup
+         * packets, it describes this situation.  The solution is to set OPC to
+         * get rid of the status packet, and then continue with the setup
+         * packet. Generalize to pxa27x CPUs.
+         */
+        if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+                udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+
         /* read SETUP packet */
         for (i = 0; i < 2; i++) {
                 if (unlikely(ep_is_empty(ep)))
@@ -1965,6 +1974,8 @@ stall:
  *     cleared by software.
  *   - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
  *     before reading ep0.
+ *     This is true only for PXA27x. This is not true anymore for PXA3xx family
+ *     (check Back-to-Back setup packet in developers guide).
  *   - irq can be called on a "packet complete" event (opc_irq=1), while
  *     UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
  *     from experimentation).
@@ -2575,7 +2586,7 @@ static struct platform_driver udc_driver = {
 
 static int __init udc_init(void)
 {
-        if (!cpu_is_pxa27x())
+        if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
                 return -ENODEV;
 
         printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);