USB: at91: Device udc add dt support

Allow to compile it if AT91 is enable.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 38 insertions, 2 deletions

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index f99b3dc745bd..4063209fe8da 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -30,6 +30,8 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/prefetch.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -1707,7 +1709,27 @@ static void at91udc_shutdown(struct platform_device *dev)
         spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static int __init at91udc_probe(struct platform_device *pdev)
+static void __devinit at91udc_of_init(struct at91_udc *udc,
+                                     struct device_node *np)
+{
+        struct at91_udc_data *board = &udc->board;
+        u32 val;
+        enum of_gpio_flags flags;
+
+        if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
+                board->vbus_polled = 1;
+
+        board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+                                                  &flags);
+        board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+        board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
+                                                  &flags);
+
+        board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+}
+
+static int __devinit at91udc_probe(struct platform_device *pdev)
 {
         struct device   *dev = &pdev->dev;
         struct at91_udc *udc;
@@ -1742,7 +1764,11 @@ static int __init at91udc_probe(struct platform_device *pdev)
         /* init software state */
         udc = &controller;
         udc->gadget.dev.parent = dev;
-        udc->board = *(struct at91_udc_data *) dev->platform_data;
+        if (pdev->dev.of_node)
+                at91udc_of_init(udc, pdev->dev.of_node);
+        else
+                memcpy(&udc->board, dev->platform_data,
+                       sizeof(struct at91_udc_data));
         udc->pdev = pdev;
         udc->enabled = 0;
         spin_lock_init(&udc->lock);
@@ -1971,6 +1997,15 @@ static int at91udc_resume(struct platform_device *pdev)
 #define at91udc_resume  NULL
 #endif
 
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_udc_dt_ids[] = {
+        { .compatible = "atmel,at91rm9200-udc" },
+        { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+#endif
+
 static struct platform_driver at91_udc_driver = {
         .remove         = __exit_p(at91udc_remove),
         .shutdown       = at91udc_shutdown,
@@ -1979,6 +2014,7 @@ static struct platform_driver at91_udc_driver = {
         .driver         = {
                 .name   = (char *) driver_name,
                 .owner  = THIS_MODULE,
+                .of_match_table = of_match_ptr(at91_udc_dt_ids),
         },
 };