Merge branch 'master'

1 files changed, 120 insertions, 47 deletions

diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index c1b47d74e206..7860c8a5800d 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -35,12 +35,14 @@
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb_ch9.h>
 #include <linux/workqueue.h>
 
 #include "usbatm.h"
 
 #define DRIVER_AUTHOR   "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION  "1.9"
+#define DRIVER_VERSION  "1.10"
 #define DRIVER_DESC     "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
 
 static const char speedtch_driver_name[] = "speedtch";
@@ -66,31 +68,42 @@ static const char speedtch_driver_name[] = "speedtch";
 
 #define RESUBMIT_DELAY          1000    /* milliseconds */
 
-#define DEFAULT_ALTSETTING      1
+#define DEFAULT_BULK_ALTSETTING 1
+#define DEFAULT_ISOC_ALTSETTING 2
 #define DEFAULT_DL_512_FIRST    0
+#define DEFAULT_ENABLE_ISOC     0
 #define DEFAULT_SW_BUFFERING    0
 
-static int altsetting = DEFAULT_ALTSETTING;
+static unsigned int altsetting = 0; /* zero means: use the default */
 static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int enable_isoc = DEFAULT_ENABLE_ISOC;
 static int sw_buffering = DEFAULT_SW_BUFFERING;
 
-module_param(altsetting, int, S_IRUGO | S_IWUSR);
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(altsetting,
-                 "Alternative setting for data interface (default: "
-                 __MODULE_STRING(DEFAULT_ALTSETTING) ")");
+                "Alternative setting for data interface (bulk_default: "
+                __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+                __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
 
 module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(dl_512_first,
                  "Read 512 bytes before sending firmware (default: "
                  __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
 
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+                "Use isochronous transfers if available (default: "
+                __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
 module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(sw_buffering,
                  "Enable software buffering (default: "
                  __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
 
+#define INTERFACE_DATA          1
 #define ENDPOINT_INT            0x81
-#define ENDPOINT_DATA           0x07
+#define ENDPOINT_BULK_DATA      0x07
+#define ENDPOINT_ISOC_DATA      0x07
 #define ENDPOINT_FIRMWARE       0x05
 
 #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
@@ -98,6 +111,8 @@ MODULE_PARM_DESC(sw_buffering,
 struct speedtch_instance_data {
         struct usbatm_data *usbatm;
 
+        unsigned int altsetting;
+
         struct work_struct status_checker;
 
         unsigned char last_status;
@@ -205,7 +220,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                                    buffer, 0x200, &actual_length, 2000);
 
                 if (ret < 0 && ret != -ETIMEDOUT)
-                        usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+                        usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
                 else
                         usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
         }
@@ -219,7 +234,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                                    buffer, thislen, &actual_length, DATA_TIMEOUT);
 
                 if (ret < 0) {
-                        usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+                        usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
                         goto out_free;
                 }
                 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
@@ -232,7 +247,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                            buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
         if (ret < 0) {
-                usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+                usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
                 goto out_free;
         }
         usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
@@ -246,7 +261,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                                    buffer, thislen, &actual_length, DATA_TIMEOUT);
 
                 if (ret < 0) {
-                        usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+                        usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
                         goto out_free;
                 }
         }
@@ -259,7 +274,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
                            buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
         if (ret < 0) {
-                usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+                usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
                 goto out_free;
         }
 
@@ -270,6 +285,11 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
            because we're in our own kernel thread anyway. */
         msleep_interruptible(1000);
 
+        if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+                usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret);
+                goto out_free;
+        }
+
         /* Enable software buffering, if requested */
         if (sw_buffering)
                 speedtch_set_swbuff(instance, 1);
@@ -285,8 +305,8 @@ out:
         return ret;
 }
 
-static int speedtch_find_firmware(struct usb_interface *intf, int phase,
-                                  const struct firmware **fw_p)
+static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
+                                  int phase, const struct firmware **fw_p)
 {
         struct device *dev = &intf->dev;
         const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
@@ -295,24 +315,24 @@ static int speedtch_find_firmware(struct usb_interface *intf, int phase,
         char buf[24];
 
         sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
-        dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+        usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
         if (request_firmware(fw_p, buf, dev)) {
                 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
-                dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+                usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
                 if (request_firmware(fw_p, buf, dev)) {
                         sprintf(buf, "speedtch-%d.bin", phase);
-                        dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+                        usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
                         if (request_firmware(fw_p, buf, dev)) {
-                                dev_warn(dev, "no stage %d firmware found!\n", phase);
+                                usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
                                 return -ENOENT;
                         }
                 }
         }
 
-        dev_info(dev, "found stage %d firmware %s\n", phase, buf);
+        usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
 
         return 0;
 }
@@ -323,15 +343,16 @@ static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface
         struct speedtch_instance_data *instance = usbatm->driver_data;
         int ret;
 
-        if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
-                        return ret;
+        if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
+                return ret;
 
-        if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
+        if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
                 release_firmware(fw1);
                 return ret;
         }
 
-        ret = speedtch_upload_firmware(instance, fw1, fw2);
+        if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
+                usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
 
         release_firmware(fw2);
         release_firmware(fw1);
@@ -428,7 +449,9 @@ static void speedtch_check_status(struct speedtch_instance_data *instance)
         int down_speed, up_speed, ret;
         unsigned char status;
 
+#ifdef VERBOSE_DEBUG
         atm_dbg(usbatm, "%s entered\n", __func__);
+#endif
 
         ret = speedtch_read_status(instance);
         if (ret < 0) {
@@ -441,9 +464,9 @@ static void speedtch_check_status(struct speedtch_instance_data *instance)
 
         status = buf[OFFSET_7];
 
-        atm_dbg(usbatm, "%s: line state %02x\n", __func__, status);
-
         if ((status != instance->last_status) || !status) {
+                atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
+
                 switch (status) {
                 case 0:
                         atm_dev->signal = ATM_PHY_SIG_LOST;
@@ -484,7 +507,7 @@ static void speedtch_check_status(struct speedtch_instance_data *instance)
 
                 default:
                         atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
-                        atm_info(usbatm, "Unknown line state %02x\n", status);
+                        atm_info(usbatm, "unknown line state %02x\n", status);
                         break;
                 }
 
@@ -583,11 +606,6 @@ static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_de
 
         atm_dbg(usbatm, "%s entered\n", __func__);
 
-        if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
-                atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
-                return ret;
-        }
-
         /* Set MAC address, it is stored in the serial number */
         memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
         if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
@@ -678,20 +696,27 @@ static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_inte
 
 static int speedtch_bind(struct usbatm_data *usbatm,
                          struct usb_interface *intf,
-                         const struct usb_device_id *id,
-                         int *need_heavy_init)
+                         const struct usb_device_id *id)
 {
         struct usb_device *usb_dev = interface_to_usbdev(intf);
-        struct usb_interface *cur_intf;
+        struct usb_interface *cur_intf, *data_intf;
         struct speedtch_instance_data *instance;
         int ifnum = intf->altsetting->desc.bInterfaceNumber;
         int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
         int i, ret;
+        int use_isoc;
 
         usb_dbg(usbatm, "%s entered\n", __func__);
 
+        /* sanity checks */
+
         if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
-                usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+                usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+                return -ENODEV;
+        }
+
+        if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
+                usb_err(usbatm, "%s: data interface not found!\n", __func__);
                 return -ENODEV;
         }
 
@@ -704,25 +729,71 @@ static int speedtch_bind(struct usbatm_data *usbatm,
                         ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
 
                         if (ret < 0) {
-                                usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
+                                usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
                                 speedtch_release_interfaces(usb_dev, i);
                                 return ret;
                         }
                 }
         }
 
-        instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+        instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 
         if (!instance) {
-                usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
+                usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
                 ret = -ENOMEM;
                 goto fail_release;
         }
 
-        memset(instance, 0, sizeof(struct speedtch_instance_data));
-
         instance->usbatm = usbatm;
 
+        /* altsetting and enable_isoc may change at any moment, so take a snapshot */
+        instance->altsetting = altsetting;
+        use_isoc = enable_isoc;
+
+        if (instance->altsetting)
+                if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+                        usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret);
+                        instance->altsetting = 0; /* fall back to default */
+                }
+
+        if (!instance->altsetting && use_isoc)
+                if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+                        usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+                        use_isoc = 0; /* fall back to bulk */
+                }
+
+        if (use_isoc) {
+                const struct usb_host_interface *desc = data_intf->cur_altsetting;
+                const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+                int i;
+
+                use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+                for (i=0; i<desc->desc.bNumEndpoints; i++) {
+                        const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+                        if ((endpoint_desc->bEndpointAddress == target_address)) {
+                                use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+                                        USB_ENDPOINT_XFER_ISOC;
+                                break;
+                        }
+                }
+
+                if (!use_isoc)
+                        usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
+        }
+
+        if (!use_isoc && !instance->altsetting)
+                if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+                        usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+                        goto fail_free;
+                }
+
+        if (!instance->altsetting)
+                instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+        usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
         INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
 
         instance->status_checker.timer.function = speedtch_status_poll;
@@ -749,13 +820,15 @@ static int speedtch_bind(struct usbatm_data *usbatm,
                               0x12, 0xc0, 0x07, 0x00,
                               instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
 
-        *need_heavy_init = (ret != SIZE_7);
+        usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
 
-        usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
+        usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
 
-        if (*need_heavy_init)
-                if ((ret = usb_reset_device(usb_dev)) < 0)
+        if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
+                if ((ret = usb_reset_device(usb_dev)) < 0) {
+                        usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
                         goto fail_free;
+                }
 
         usbatm->driver_data = instance;
 
@@ -787,15 +860,15 @@ static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *in
 ***********/
 
 static struct usbatm_driver speedtch_usbatm_driver = {
-        .owner          = THIS_MODULE,
         .driver_name    = speedtch_driver_name,
         .bind           = speedtch_bind,
         .heavy_init     = speedtch_heavy_init,
         .unbind         = speedtch_unbind,
         .atm_start      = speedtch_atm_start,
         .atm_stop       = speedtch_atm_stop,
-        .in             = ENDPOINT_DATA,
-        .out            = ENDPOINT_DATA
+        .bulk_in        = ENDPOINT_BULK_DATA,
+        .bulk_out       = ENDPOINT_BULK_DATA,
+        .isoc_in        = ENDPOINT_ISOC_DATA
 };
 
 static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)