aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/atm/speedtch.c
diff options
context:
space:
mode:
authorDuncan Sands <duncan.sands@math.u-psud.fr>2005-05-11 14:20:40 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2005-06-27 17:43:56 -0400
commit48da7267ff1631b0bff1eab15db86adace11ea91 (patch)
tree6ca7223ea15afeb4b0784b1a36a55516c7d14923 /drivers/usb/atm/speedtch.c
parent9574507c98087951866ef30c8bf876e23ca4b99e (diff)
[PATCH] USB ATM: port speedtch to new usbatm core
Port the speedtch driver to the new usbatm core. The code is much the same as before, just reorganized, though I threw in some minor improvements (a new module parameter for choosing the altsetting, more robust urb failure handling, ...) while I was there. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/atm/speedtch.c')
-rw-r--r--drivers/usb/atm/speedtch.c1085
1 files changed, 533 insertions, 552 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 233f9229badb..6a6eaa2a3b1c 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -5,6 +5,8 @@
5 * Copyright (C) 2003, Duncan Sands 5 * Copyright (C) 2003, Duncan Sands
6 * Copyright (C) 2004, David Woodhouse 6 * Copyright (C) 2004, David Woodhouse
7 * 7 *
8 * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
9 *
8 * This program is free software; you can redistribute it and/or modify it 10 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free 11 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option) 12 * Software Foundation; either version 2 of the License, or (at your option)
@@ -21,819 +23,798 @@
21 * 23 *
22 ******************************************************************************/ 24 ******************************************************************************/
23 25
24#include <linux/module.h> 26#include <asm/page.h>
25#include <linux/moduleparam.h> 27#include <linux/device.h>
28#include <linux/errno.h>
29#include <linux/firmware.h>
26#include <linux/gfp.h> 30#include <linux/gfp.h>
31#include <linux/init.h>
27#include <linux/kernel.h> 32#include <linux/kernel.h>
28#include <linux/sched.h> 33#include <linux/module.h>
29#include <linux/timer.h> 34#include <linux/moduleparam.h>
30#include <linux/errno.h>
31#include <linux/proc_fs.h>
32#include <linux/slab.h> 35#include <linux/slab.h>
33#include <linux/wait.h> 36#include <linux/stat.h>
34#include <linux/list.h> 37#include <linux/timer.h>
35#include <asm/processor.h> 38#include <linux/workqueue.h>
36#include <asm/uaccess.h>
37#include <linux/smp_lock.h>
38#include <linux/interrupt.h>
39#include <linux/atm.h>
40#include <linux/atmdev.h>
41#include <linux/crc32.h>
42#include <linux/init.h>
43#include <linux/firmware.h>
44
45#include "usb_atm.h"
46 39
47#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) 40#include "usbatm.h"
48# define USE_FW_LOADER
49#endif
50 41
51#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>" 42#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
52#define DRIVER_VERSION "1.8" 43#define DRIVER_VERSION "1.9"
53#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION 44#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
54 45
55static const char speedtch_driver_name[] = "speedtch"; 46static const char speedtch_driver_name[] = "speedtch";
56 47
57#define SPEEDTOUCH_VENDORID 0x06b9 48#define CTRL_TIMEOUT 2000 /* milliseconds */
58#define SPEEDTOUCH_PRODUCTID 0x4061 49#define DATA_TIMEOUT 2000 /* milliseconds */
59 50
60/* Timeout in jiffies */ 51#define OFFSET_7 0 /* size 1 */
61#define CTRL_TIMEOUT 2000 52#define OFFSET_b 1 /* size 8 */
62#define DATA_TIMEOUT 2000 53#define OFFSET_d 9 /* size 4 */
54#define OFFSET_e 13 /* size 1 */
55#define OFFSET_f 14 /* size 1 */
56#define TOTAL 15
63 57
64#define OFFSET_7 0 /* size 1 */ 58#define SIZE_7 1
65#define OFFSET_b 1 /* size 8 */ 59#define SIZE_b 8
66#define OFFSET_d 9 /* size 4 */ 60#define SIZE_d 4
67#define OFFSET_e 13 /* size 1 */ 61#define SIZE_e 1
68#define OFFSET_f 14 /* size 1 */ 62#define SIZE_f 1
69#define TOTAL 15
70 63
71#define SIZE_7 1 64#define MIN_POLL_DELAY 5000 /* milliseconds */
72#define SIZE_b 8 65#define MAX_POLL_DELAY 60000 /* milliseconds */
73#define SIZE_d 4
74#define SIZE_e 1
75#define SIZE_f 1
76 66
77static int dl_512_first = 0; 67#define RESUBMIT_DELAY 1000 /* milliseconds */
78static int sw_buffering = 0;
79 68
80module_param(dl_512_first, bool, 0444); 69#define DEFAULT_ALTSETTING 1
81MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware"); 70#define DEFAULT_DL_512_FIRST 0
71#define DEFAULT_SW_BUFFERING 0
82 72
83module_param(sw_buffering, uint, 0444); 73static int altsetting = DEFAULT_ALTSETTING;
84MODULE_PARM_DESC(sw_buffering, "Enable software buffering"); 74static int dl_512_first = DEFAULT_DL_512_FIRST;
75static int sw_buffering = DEFAULT_SW_BUFFERING;
85 76
86#define UDSL_IOCTL_LINE_UP 1 77module_param(altsetting, int, S_IRUGO | S_IWUSR);
87#define UDSL_IOCTL_LINE_DOWN 2 78MODULE_PARM_DESC(altsetting,
79 "Alternative setting for data interface (default: "
80 __MODULE_STRING(DEFAULT_ALTSETTING) ")");
88 81
89#define SPEEDTCH_ENDPOINT_INT 0x81 82module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
90#define SPEEDTCH_ENDPOINT_DATA 0x07 83MODULE_PARM_DESC(dl_512_first,
91#define SPEEDTCH_ENDPOINT_FIRMWARE 0x05 84 "Read 512 bytes before sending firmware (default: "
85 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
92 86
93#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) ) 87module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
88MODULE_PARM_DESC(sw_buffering,
89 "Enable software buffering (default: "
90 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
94 91
95static struct usb_device_id speedtch_usb_ids[] = { 92#define ENDPOINT_INT 0x81
96 {USB_DEVICE(SPEEDTOUCH_VENDORID, SPEEDTOUCH_PRODUCTID)}, 93#define ENDPOINT_DATA 0x07
97 {} 94#define ENDPOINT_FIRMWARE 0x05
98};
99 95
100MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); 96#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
101 97
102struct speedtch_instance_data { 98struct speedtch_instance_data {
103 struct udsl_instance_data u; 99 struct usbatm_data *usbatm;
100
101 struct work_struct status_checker;
104 102
105 /* Status */ 103 int poll_delay; /* milliseconds */
104
105 struct timer_list resubmit_timer;
106 struct urb *int_urb; 106 struct urb *int_urb;
107 unsigned char int_data[16]; 107 unsigned char int_data[16];
108 struct work_struct poll_work;
109 struct timer_list poll_timer;
110};
111/* USB */
112
113static int speedtch_usb_probe(struct usb_interface *intf,
114 const struct usb_device_id *id);
115static void speedtch_usb_disconnect(struct usb_interface *intf);
116static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
117 void *user_data);
118static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs);
119static void speedtch_poll_status(struct speedtch_instance_data *instance);
120 108
121static struct usb_driver speedtch_usb_driver = { 109 unsigned char scratch_buffer[TOTAL];
122 .owner = THIS_MODULE,
123 .name = speedtch_driver_name,
124 .probe = speedtch_usb_probe,
125 .disconnect = speedtch_usb_disconnect,
126 .ioctl = speedtch_usb_ioctl,
127 .id_table = speedtch_usb_ids,
128}; 110};
129 111
130/*************** 112/***************
131** firmware ** 113** firmware **
132***************/ 114***************/
133 115
134static void speedtch_got_firmware(struct speedtch_instance_data *instance, 116static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
135 int got_it)
136{ 117{
137 int err; 118 struct usbatm_data *usbatm = instance->usbatm;
138 struct usb_interface *intf; 119 struct usb_device *usb_dev = usbatm->usb_dev;
139
140 down(&instance->u.serialize); /* vs self, speedtch_firmware_start */
141 if (instance->u.status == UDSL_LOADED_FIRMWARE)
142 goto out;
143 if (!got_it) {
144 instance->u.status = UDSL_NO_FIRMWARE;
145 goto out;
146 }
147 if ((err = usb_set_interface(instance->u.usb_dev, 1, 1)) < 0) {
148 dbg("speedtch_got_firmware: usb_set_interface returned %d!", err);
149 instance->u.status = UDSL_NO_FIRMWARE;
150 goto out;
151 }
152
153 /* Set up interrupt endpoint */
154 intf = usb_ifnum_to_if(instance->u.usb_dev, 0);
155 if (intf && !usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) {
156
157 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
158 if (instance->int_urb) {
159
160 usb_fill_int_urb(instance->int_urb, instance->u.usb_dev,
161 usb_rcvintpipe(instance->u.usb_dev, SPEEDTCH_ENDPOINT_INT),
162 instance->int_data,
163 sizeof(instance->int_data),
164 speedtch_handle_int, instance, 50);
165 err = usb_submit_urb(instance->int_urb, GFP_KERNEL);
166 if (err) {
167 /* Doesn't matter; we'll poll anyway */
168 dbg("speedtch_got_firmware: Submission of interrupt URB failed %d", err);
169 usb_free_urb(instance->int_urb);
170 instance->int_urb = NULL;
171 usb_driver_release_interface(&speedtch_usb_driver, intf);
172 }
173 }
174 }
175 /* Start status polling */
176 mod_timer(&instance->poll_timer, jiffies + (1 * HZ));
177
178 instance->u.status = UDSL_LOADED_FIRMWARE;
179 tasklet_schedule(&instance->u.receive_tasklet);
180 out:
181 up(&instance->u.serialize);
182 wake_up_interruptible(&instance->u.firmware_waiters);
183}
184
185static int speedtch_set_swbuff(struct speedtch_instance_data *instance,
186 int state)
187{
188 struct usb_device *dev = instance->u.usb_dev;
189 int ret; 120 int ret;
190 121
191 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 122 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
192 0x32, 0x40, state ? 0x01 : 0x00, 123 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
193 0x00, NULL, 0, 100); 124 if (ret < 0)
194 if (ret < 0) { 125 usb_warn(usbatm,
195 printk("Warning: %sabling SW buffering: usb_control_msg returned %d\n", 126 "%sabling SW buffering: usb_control_msg returned %d\n",
196 state ? "En" : "Dis", ret); 127 state ? "En" : "Dis", ret);
197 return ret; 128 else
198 } 129 dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
199
200 dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
201 return 0;
202} 130}
203 131
204static void speedtch_test_sequence(struct speedtch_instance_data *instance) 132static void speedtch_test_sequence(struct speedtch_instance_data *instance)
205{ 133{
206 struct usb_device *dev = instance->u.usb_dev; 134 struct usbatm_data *usbatm = instance->usbatm;
207 unsigned char buf[10]; 135 struct usb_device *usb_dev = usbatm->usb_dev;
136 unsigned char *buf = instance->scratch_buffer;
208 int ret; 137 int ret;
209 138
210 /* URB 147 */ 139 /* URB 147 */
211 buf[0] = 0x1c; 140 buf[0] = 0x1c;
212 buf[1] = 0x50; 141 buf[1] = 0x50;
213 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 142 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
214 0x01, 0x40, 0x0b, 0x00, buf, 2, 100); 143 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
215 if (ret < 0) 144 if (ret < 0)
216 printk(KERN_WARNING "%s failed on URB147: %d\n", __func__, ret); 145 usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
217 146
218 /* URB 148 */ 147 /* URB 148 */
219 buf[0] = 0x32; 148 buf[0] = 0x32;
220 buf[1] = 0x00; 149 buf[1] = 0x00;
221 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 150 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
222 0x01, 0x40, 0x02, 0x00, buf, 2, 100); 151 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
223 if (ret < 0) 152 if (ret < 0)
224 printk(KERN_WARNING "%s failed on URB148: %d\n", __func__, ret); 153 usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
225 154
226 /* URB 149 */ 155 /* URB 149 */
227 buf[0] = 0x01; 156 buf[0] = 0x01;
228 buf[1] = 0x00; 157 buf[1] = 0x00;
229 buf[2] = 0x01; 158 buf[2] = 0x01;
230 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 159 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
231 0x01, 0x40, 0x03, 0x00, buf, 3, 100); 160 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
232 if (ret < 0) 161 if (ret < 0)
233 printk(KERN_WARNING "%s failed on URB149: %d\n", __func__, ret); 162 usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
234 163
235 /* URB 150 */ 164 /* URB 150 */
236 buf[0] = 0x01; 165 buf[0] = 0x01;
237 buf[1] = 0x00; 166 buf[1] = 0x00;
238 buf[2] = 0x01; 167 buf[2] = 0x01;
239 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 168 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
240 0x01, 0x40, 0x04, 0x00, buf, 3, 100); 169 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
241 if (ret < 0) 170 if (ret < 0)
242 printk(KERN_WARNING "%s failed on URB150: %d\n", __func__, ret); 171 usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
243} 172}
244 173
245static int speedtch_start_synchro(struct speedtch_instance_data *instance) 174static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
175 const struct firmware *fw1,
176 const struct firmware *fw2)
246{ 177{
247 struct usb_device *dev = instance->u.usb_dev; 178 unsigned char *buffer;
248 unsigned char buf[2]; 179 struct usbatm_data *usbatm = instance->usbatm;
249 int ret; 180 struct usb_interface *intf;
181 struct usb_device *usb_dev = usbatm->usb_dev;
182 int actual_length;
183 int ret = 0;
184 int offset;
185
186 usb_dbg(usbatm, "%s entered\n", __func__);
187
188 if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
189 ret = -ENOMEM;
190 usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
191 goto out;
192 }
193
194 if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
195 ret = -ENODEV;
196 usb_dbg(usbatm, "%s: interface not found!\n", __func__);
197 goto out_free;
198 }
199
200 /* URB 7 */
201 if (dl_512_first) { /* some modems need a read before writing the firmware */
202 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
203 buffer, 0x200, &actual_length, 2000);
204
205 if (ret < 0 && ret != -ETIMEDOUT)
206 usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
207 else
208 usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
209 }
210
211 /* URB 8 : both leds are static green */
212 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
213 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
214 memcpy(buffer, fw1->data + offset, thislen);
215
216 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
217 buffer, thislen, &actual_length, DATA_TIMEOUT);
218
219 if (ret < 0) {
220 usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
221 goto out_free;
222 }
223 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
224 }
225
226 /* USB led blinking green, ADSL led off */
227
228 /* URB 11 */
229 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
230 buffer, 0x200, &actual_length, DATA_TIMEOUT);
250 231
251 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
252 0x12, 0xc0, 0x04, 0x00,
253 buf, sizeof(buf), CTRL_TIMEOUT);
254 if (ret < 0) { 232 if (ret < 0) {
255 printk(KERN_WARNING "SpeedTouch: Failed to start ADSL synchronisation: %d\n", ret); 233 usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
256 return ret; 234 goto out_free;
257 } 235 }
236 usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
258 237
259 dbg("speedtch_start_synchro: modem prodded. %d Bytes returned: %02x %02x", ret, buf[0], buf[1]); 238 /* URBs 12 to 139 - USB led blinking green, ADSL led off */
260 return 0; 239 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
240 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
241 memcpy(buffer, fw2->data + offset, thislen);
242
243 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
244 buffer, thislen, &actual_length, DATA_TIMEOUT);
245
246 if (ret < 0) {
247 usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
248 goto out_free;
249 }
250 }
251 usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
252
253 /* USB led static green, ADSL led static red */
254
255 /* URB 142 */
256 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
257 buffer, 0x200, &actual_length, DATA_TIMEOUT);
258
259 if (ret < 0) {
260 usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
261 goto out_free;
262 }
263
264 /* success */
265 usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
266
267 /* Delay to allow firmware to start up. We can do this here
268 because we're in our own kernel thread anyway. */
269 msleep_interruptible(1000);
270
271 /* Enable software buffering, if requested */
272 if (sw_buffering)
273 speedtch_set_swbuff(instance, 1);
274
275 /* Magic spell; don't ask us what this does */
276 speedtch_test_sequence(instance);
277
278 ret = 0;
279
280out_free:
281 free_page((unsigned long)buffer);
282out:
283 return ret;
261} 284}
262 285
263static void speedtch_handle_int(struct urb *urb, struct pt_regs *regs) 286static int speedtch_find_firmware(struct usb_interface *intf, int phase,
287 const struct firmware **fw_p)
264{ 288{
265 struct speedtch_instance_data *instance = urb->context; 289 struct device *dev = &intf->dev;
266 unsigned int count = urb->actual_length; 290 const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
267 int ret; 291 const u8 major_revision = bcdDevice >> 8;
292 const u8 minor_revision = bcdDevice & 0xff;
293 char buf[24];
268 294
269 /* The magic interrupt for "up state" */ 295 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
270 const static unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 }; 296 dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
271 /* The magic interrupt for "down state" */
272 const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
273 297
274 switch (urb->status) { 298 if (request_firmware(fw_p, buf, dev)) {
275 case 0: 299 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
276 /* success */ 300 dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
277 break;
278 case -ECONNRESET:
279 case -ENOENT:
280 case -ESHUTDOWN:
281 /* this urb is terminated; clean up */
282 dbg("%s - urb shutting down with status: %d", __func__, urb->status);
283 return;
284 default:
285 dbg("%s - nonzero urb status received: %d", __func__, urb->status);
286 goto exit;
287 }
288 301
289 if (count < 6) { 302 if (request_firmware(fw_p, buf, dev)) {
290 dbg("%s - int packet too short", __func__); 303 sprintf(buf, "speedtch-%d.bin", phase);
291 goto exit; 304 dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
305
306 if (request_firmware(fw_p, buf, dev)) {
307 dev_warn(dev, "no stage %d firmware found!\n", phase);
308 return -ENOENT;
309 }
310 }
292 } 311 }
293 312
294 if (!memcmp(up_int, instance->int_data, 6)) { 313 dev_info(dev, "found stage %d firmware %s\n", phase, buf);
295 del_timer(&instance->poll_timer);
296 printk(KERN_NOTICE "DSL line goes up\n");
297 } else if (!memcmp(down_int, instance->int_data, 6)) {
298 printk(KERN_NOTICE "DSL line goes down\n");
299 } else {
300 int i;
301 314
302 printk(KERN_DEBUG "Unknown interrupt packet of %d bytes:", count); 315 return 0;
303 for (i = 0; i < count; i++) 316}
304 printk(" %02x", instance->int_data[i]); 317
305 printk("\n"); 318static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
319{
320 const struct firmware *fw1, *fw2;
321 struct speedtch_instance_data *instance = usbatm->driver_data;
322 int ret;
323
324 if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
325 return ret;
326
327 if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
328 release_firmware(fw1);
329 return ret;
306 } 330 }
307 schedule_work(&instance->poll_work);
308 331
309 exit: 332 ret = speedtch_upload_firmware(instance, fw1, fw2);
310 rmb(); 333
311 if (!instance->int_urb) 334 release_firmware(fw2);
312 return; 335 release_firmware(fw1);
313 336
314 ret = usb_submit_urb(urb, GFP_ATOMIC); 337 return ret;
315 if (ret)
316 err("%s - usb_submit_urb failed with result %d", __func__, ret);
317} 338}
318 339
319static int speedtch_get_status(struct speedtch_instance_data *instance, 340
320 unsigned char *buf) 341/**********
342** ATM **
343**********/
344
345static int speedtch_read_status(struct speedtch_instance_data *instance)
321{ 346{
322 struct usb_device *dev = instance->u.usb_dev; 347 struct usbatm_data *usbatm = instance->usbatm;
348 struct usb_device *usb_dev = usbatm->usb_dev;
349 unsigned char *buf = instance->scratch_buffer;
323 int ret; 350 int ret;
324 351
325 memset(buf, 0, TOTAL); 352 memset(buf, 0, TOTAL);
326 353
327 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 354 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
328 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7, 355 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
329 CTRL_TIMEOUT); 356 CTRL_TIMEOUT);
330 if (ret < 0) { 357 if (ret < 0) {
331 dbg("MSG 7 failed"); 358 atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
332 return ret; 359 return ret;
333 } 360 }
334 361
335 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 362 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
336 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b, 363 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
337 CTRL_TIMEOUT); 364 CTRL_TIMEOUT);
338 if (ret < 0) { 365 if (ret < 0) {
339 dbg("MSG B failed"); 366 atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
340 return ret; 367 return ret;
341 } 368 }
342 369
343 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 370 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
344 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d, 371 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
345 CTRL_TIMEOUT); 372 CTRL_TIMEOUT);
346 if (ret < 0) { 373 if (ret < 0) {
347 dbg("MSG D failed"); 374 atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
348 return ret; 375 return ret;
349 } 376 }
350 377
351 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 378 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
352 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e, 379 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
353 CTRL_TIMEOUT); 380 CTRL_TIMEOUT);
354 if (ret < 0) { 381 if (ret < 0) {
355 dbg("MSG E failed"); 382 atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
356 return ret; 383 return ret;
357 } 384 }
358 385
359 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 386 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
360 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f, 387 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
361 CTRL_TIMEOUT); 388 CTRL_TIMEOUT);
362 if (ret < 0) { 389 if (ret < 0) {
363 dbg("MSG F failed"); 390 atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
364 return ret; 391 return ret;
365 } 392 }
366 393
367 return 0; 394 return 0;
368} 395}
369 396
370static void speedtch_poll_status(struct speedtch_instance_data *instance) 397static int speedtch_start_synchro(struct speedtch_instance_data *instance)
371{ 398{
372 unsigned char buf[TOTAL]; 399 struct usbatm_data *usbatm = instance->usbatm;
400 struct usb_device *usb_dev = usbatm->usb_dev;
401 unsigned char *buf = instance->scratch_buffer;
373 int ret; 402 int ret;
374 403
375 ret = speedtch_get_status(instance, buf); 404 atm_dbg(usbatm, "%s entered\n", __func__);
376 if (ret) { 405
377 printk(KERN_WARNING 406 memset(buf, 0, 2);
378 "SpeedTouch: Error %d fetching device status\n", ret); 407
408 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
409 0x12, 0xc0, 0x04, 0x00,
410 buf, 2, CTRL_TIMEOUT);
411
412 if (ret < 0)
413 atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
414 else
415 atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
416 __func__, ret, buf[0], buf[1]);
417
418 return ret;
419}
420
421static void speedtch_check_status(struct speedtch_instance_data *instance)
422{
423 struct usbatm_data *usbatm = instance->usbatm;
424 struct atm_dev *atm_dev = usbatm->atm_dev;
425 unsigned char *buf = instance->scratch_buffer;
426 int ret;
427
428 atm_dbg(usbatm, "%s entered\n", __func__);
429
430 ret = speedtch_read_status(instance);
431 if (ret < 0) {
432 atm_warn(usbatm, "error %d fetching device status\n", ret);
433 if (instance->poll_delay < MAX_POLL_DELAY)
434 instance->poll_delay *= 2;
379 return; 435 return;
380 } 436 }
381 437
382 dbg("Line state %02x", buf[OFFSET_7]); 438 if (instance->poll_delay > MIN_POLL_DELAY)
439 instance->poll_delay /= 2;
440
441 atm_dbg(usbatm, "%s: line state %02x\n", __func__, buf[OFFSET_7]);
383 442
384 switch (buf[OFFSET_7]) { 443 switch (buf[OFFSET_7]) {
385 case 0: 444 case 0:
386 if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { 445 if (atm_dev->signal != ATM_PHY_SIG_LOST) {
387 instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; 446 atm_dev->signal = ATM_PHY_SIG_LOST;
388 printk(KERN_NOTICE "ADSL line is down\n"); 447 atm_info(usbatm, "ADSL line is down\n");
448 /* It'll never resync again unless we ask it to... */
449 ret = speedtch_start_synchro(instance);
389 } 450 }
390 break; 451 break;
391 452
392 case 0x08: 453 case 0x08:
393 if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { 454 if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
394 instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN; 455 atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
395 printk(KERN_NOTICE "ADSL line is blocked?\n"); 456 atm_info(usbatm, "ADSL line is blocked?\n");
396 } 457 }
397 break; 458 break;
398 459
399 case 0x10: 460 case 0x10:
400 if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { 461 if (atm_dev->signal != ATM_PHY_SIG_LOST) {
401 instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; 462 atm_dev->signal = ATM_PHY_SIG_LOST;
402 printk(KERN_NOTICE "ADSL line is synchronising\n"); 463 atm_info(usbatm, "ADSL line is synchronising\n");
403 } 464 }
404 break; 465 break;
405 466
406 case 0x20: 467 case 0x20:
407 if (instance->u.atm_dev->signal != ATM_PHY_SIG_FOUND) { 468 if (atm_dev->signal != ATM_PHY_SIG_FOUND) {
408 int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) 469 int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
409 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24); 470 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
410 int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) 471 int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
411 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24); 472 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
412 473
413 if (!(down_speed & 0x0000ffff) && 474 if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
414 !(up_speed & 0x0000ffff)) {
415 down_speed >>= 16; 475 down_speed >>= 16;
416 up_speed >>= 16; 476 up_speed >>= 16;
417 } 477 }
418 instance->u.atm_dev->link_rate = down_speed * 1000 / 424;
419 instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
420 478
421 printk(KERN_NOTICE 479 atm_dev->link_rate = down_speed * 1000 / 424;
422 "ADSL line is up (%d Kib/s down | %d Kib/s up)\n", 480 atm_dev->signal = ATM_PHY_SIG_FOUND;
423 down_speed, up_speed); 481
482 atm_info(usbatm,
483 "ADSL line is up (%d Kib/s down | %d Kib/s up)\n",
484 down_speed, up_speed);
424 } 485 }
425 break; 486 break;
426 487
427 default: 488 default:
428 if (instance->u.atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { 489 if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
429 instance->u.atm_dev->signal = ATM_PHY_SIG_UNKNOWN; 490 atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
430 printk(KERN_NOTICE "Unknown line state %02x\n", buf[OFFSET_7]); 491 atm_info(usbatm, "Unknown line state %02x\n", buf[OFFSET_7]);
431 } 492 }
432 break; 493 break;
433 } 494 }
434} 495}
435 496
436static void speedtch_timer_poll(unsigned long data) 497static void speedtch_status_poll(unsigned long data)
437{ 498{
438 struct speedtch_instance_data *instance = (void *)data; 499 struct speedtch_instance_data *instance = (void *)data;
439 500
440 schedule_work(&instance->poll_work); 501 schedule_work(&instance->status_checker);
441 mod_timer(&instance->poll_timer, jiffies + (5 * HZ)); 502
503 /* The following check is racy, but the race is harmless */
504 if (instance->poll_delay < MAX_POLL_DELAY)
505 mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(instance->poll_delay));
506 else
507 atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
442} 508}
443 509
444#ifdef USE_FW_LOADER 510static void speedtch_resubmit_int(unsigned long data)
445static void speedtch_upload_firmware(struct speedtch_instance_data *instance,
446 const struct firmware *fw1,
447 const struct firmware *fw2)
448{ 511{
449 unsigned char *buffer; 512 struct speedtch_instance_data *instance = (void *)data;
450 struct usb_device *usb_dev = instance->u.usb_dev; 513 struct urb *int_urb = instance->int_urb;
451 struct usb_interface *intf; 514 int ret;
452 int actual_length, ret;
453 int offset;
454
455 dbg("speedtch_upload_firmware");
456
457 if (!(intf = usb_ifnum_to_if(usb_dev, 2))) {
458 dbg("speedtch_upload_firmware: interface not found!");
459 goto fail;
460 }
461
462 if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
463 dbg("speedtch_upload_firmware: no memory for buffer!");
464 goto fail;
465 }
466
467 /* A user-space firmware loader may already have claimed interface #2 */
468 if ((ret =
469 usb_driver_claim_interface(&speedtch_usb_driver, intf, NULL)) < 0) {
470 dbg("speedtch_upload_firmware: interface in use (%d)!", ret);
471 goto fail_free;
472 }
473
474 /* URB 7 */
475 if (dl_512_first) { /* some modems need a read before writing the firmware */
476 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
477 buffer, 0x200, &actual_length, 2000);
478
479 if (ret < 0 && ret != -ETIMEDOUT)
480 dbg("speedtch_upload_firmware: read BLOCK0 from modem failed (%d)!", ret);
481 else
482 dbg("speedtch_upload_firmware: BLOCK0 downloaded (%d bytes)", ret);
483 }
484
485 /* URB 8 : both leds are static green */
486 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
487 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
488 memcpy(buffer, fw1->data + offset, thislen);
489 515
490 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), 516 atm_dbg(instance->usbatm, "%s entered\n", __func__);
491 buffer, thislen, &actual_length, DATA_TIMEOUT);
492 517
493 if (ret < 0) { 518 if (int_urb) {
494 dbg("speedtch_upload_firmware: write BLOCK1 to modem failed (%d)!", ret); 519 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
495 goto fail_release; 520 if (!ret)
521 schedule_work(&instance->status_checker);
522 else {
523 atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
524 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
496 } 525 }
497 dbg("speedtch_upload_firmware: BLOCK1 uploaded (%zu bytes)", fw1->size);
498 } 526 }
527}
499 528
500 /* USB led blinking green, ADSL led off */ 529static void speedtch_handle_int(struct urb *int_urb, struct pt_regs *regs)
530{
531 struct speedtch_instance_data *instance = int_urb->context;
532 struct usbatm_data *usbatm = instance->usbatm;
533 unsigned int count = int_urb->actual_length;
534 int ret = int_urb->status;
501 535
502 /* URB 11 */ 536 /* The magic interrupt for "up state" */
503 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), 537 const static unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
504 buffer, 0x200, &actual_length, DATA_TIMEOUT); 538 /* The magic interrupt for "down state" */
539 const static unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
540
541 atm_dbg(usbatm, "%s entered\n", __func__);
505 542
506 if (ret < 0) { 543 if (ret < 0) {
507 dbg("speedtch_upload_firmware: read BLOCK2 from modem failed (%d)!", ret); 544 atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, ret);
508 goto fail_release; 545 goto fail;
509 } 546 }
510 dbg("speedtch_upload_firmware: BLOCK2 downloaded (%d bytes)", actual_length);
511 547
512 /* URBs 12 to 139 - USB led blinking green, ADSL led off */ 548 if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
513 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) { 549 del_timer(&instance->status_checker.timer);
514 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset); 550 atm_info(usbatm, "DSL line goes up\n");
515 memcpy(buffer, fw2->data + offset, thislen); 551 } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
552 atm_info(usbatm, "DSL line goes down\n");
553 } else {
554 int i;
516 555
517 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE), 556 atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
518 buffer, thislen, &actual_length, DATA_TIMEOUT); 557 for (i = 0; i < count; i++)
558 printk(" %02x", instance->int_data[i]);
559 printk("\n");
560 goto fail;
561 }
519 562
563 if ((int_urb = instance->int_urb)) {
564 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
565 schedule_work(&instance->status_checker);
520 if (ret < 0) { 566 if (ret < 0) {
521 dbg("speedtch_upload_firmware: write BLOCK3 to modem failed (%d)!", ret); 567 atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
522 goto fail_release; 568 goto fail;
523 } 569 }
524 } 570 }
525 dbg("speedtch_upload_firmware: BLOCK3 uploaded (%zu bytes)", fw2->size);
526
527 /* USB led static green, ADSL led static red */
528
529 /* URB 142 */
530 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
531 buffer, 0x200, &actual_length, DATA_TIMEOUT);
532
533 if (ret < 0) {
534 dbg("speedtch_upload_firmware: read BLOCK4 from modem failed (%d)!", ret);
535 goto fail_release;
536 }
537
538 /* success */
539 dbg("speedtch_upload_firmware: BLOCK4 downloaded (%d bytes)", actual_length);
540
541 /* Delay to allow firmware to start up. We can do this here
542 because we're in our own kernel thread anyway. */
543 msleep(1000);
544
545 /* Enable software buffering, if requested */
546 if (sw_buffering)
547 speedtch_set_swbuff(instance, 1);
548
549 /* Magic spell; don't ask us what this does */
550 speedtch_test_sequence(instance);
551
552 /* Start modem synchronisation */
553 if (speedtch_start_synchro(instance))
554 dbg("speedtch_start_synchro: failed");
555
556 speedtch_got_firmware(instance, 1);
557 571
558 free_page((unsigned long)buffer);
559 return; 572 return;
560 573
561 fail_release: 574fail:
562 /* Only release interface #2 if uploading failed; we don't release it 575 if ((int_urb = instance->int_urb))
563 we succeeded. This prevents the userspace tools from trying to load 576 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
564 the firmware themselves */
565 usb_driver_release_interface(&speedtch_usb_driver, intf);
566 fail_free:
567 free_page((unsigned long)buffer);
568 fail:
569 speedtch_got_firmware(instance, 0);
570} 577}
571 578
572static int speedtch_find_firmware(struct speedtch_instance_data 579static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
573 *instance, int phase,
574 const struct firmware **fw_p)
575{ 580{
576 char buf[24]; 581 struct usb_device *usb_dev = usbatm->usb_dev;
577 const u16 bcdDevice = le16_to_cpu(instance->u.usb_dev->descriptor.bcdDevice); 582 struct speedtch_instance_data *instance = usbatm->driver_data;
578 const u8 major_revision = bcdDevice >> 8; 583 int i, ret;
579 const u8 minor_revision = bcdDevice & 0xff; 584 unsigned char mac_str[13];
580
581 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
582 dbg("speedtch_find_firmware: looking for %s", buf);
583
584 if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) {
585 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
586 dbg("speedtch_find_firmware: looking for %s", buf);
587 585
588 if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) { 586 atm_dbg(usbatm, "%s entered\n", __func__);
589 sprintf(buf, "speedtch-%d.bin", phase);
590 dbg("speedtch_find_firmware: looking for %s", buf);
591 587
592 if (request_firmware(fw_p, buf, &instance->u.usb_dev->dev)) { 588 if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
593 dev_warn(&instance->u.usb_dev->dev, "no stage %d firmware found!", phase); 589 atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
594 return -ENOENT; 590 return ret;
595 }
596 }
597 } 591 }
598 592
599 dev_info(&instance->u.usb_dev->dev, "found stage %d firmware %s\n", phase, buf); 593 /* Set MAC address, it is stored in the serial number */
600 594 memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
601 return 0; 595 if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
602} 596 for (i = 0; i < 6; i++)
603 597 atm_dev->esi[i] = (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
604static int speedtch_load_firmware(void *arg) 598 }
605{
606 const struct firmware *fw1, *fw2;
607 struct speedtch_instance_data *instance = arg;
608
609 BUG_ON(!instance);
610 599
611 daemonize("firmware/speedtch"); 600 /* Start modem synchronisation */
601 ret = speedtch_start_synchro(instance);
612 602
613 if (!speedtch_find_firmware(instance, 1, &fw1)) { 603 /* Set up interrupt endpoint */
614 if (!speedtch_find_firmware(instance, 2, &fw2)) { 604 if (instance->int_urb) {
615 speedtch_upload_firmware(instance, fw1, fw2); 605 ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
616 release_firmware(fw2); 606 if (ret < 0) {
607 /* Doesn't matter; we'll poll anyway */
608 atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
609 usb_free_urb(instance->int_urb);
610 instance->int_urb = NULL;
617 } 611 }
618 release_firmware(fw1);
619 } 612 }
620 613
621 /* In case we failed, set state back to NO_FIRMWARE so that 614 /* Start status polling */
622 another later attempt may work. Otherwise, we never actually 615 mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(1000));
623 manage to recover if, for example, the firmware is on /usr and
624 we look for it too early. */
625 speedtch_got_firmware(instance, 0);
626 616
627 module_put(THIS_MODULE);
628 udsl_put_instance(&instance->u);
629 return 0; 617 return 0;
630} 618}
631#endif /* USE_FW_LOADER */
632 619
633static void speedtch_firmware_start(struct speedtch_instance_data *instance) 620static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
634{ 621{
635#ifdef USE_FW_LOADER 622 struct speedtch_instance_data *instance = usbatm->driver_data;
636 int ret; 623 struct urb *int_urb = instance->int_urb;
637#endif 624
638 625 atm_dbg(usbatm, "%s entered\n", __func__);
639 dbg("speedtch_firmware_start"); 626
640 627 del_timer_sync(&instance->status_checker.timer);
641 down(&instance->u.serialize); /* vs self, speedtch_got_firmware */ 628
642 629 /*
643 if (instance->u.status >= UDSL_LOADING_FIRMWARE) { 630 * Since resubmit_timer and int_urb can schedule themselves and
644 up(&instance->u.serialize); 631 * each other, shutting them down correctly takes some care
645 return; 632 */
646 } 633 instance->int_urb = NULL; /* signal shutdown */
634 mb();
635 usb_kill_urb(int_urb);
636 del_timer_sync(&instance->resubmit_timer);
637 /*
638 * At this point, speedtch_handle_int and speedtch_resubmit_int
639 * can run or be running, but instance->int_urb == NULL means that
640 * they will not reschedule
641 */
642 usb_kill_urb(int_urb);
643 del_timer_sync(&instance->resubmit_timer);
644 usb_free_urb(int_urb);
647 645
648 instance->u.status = UDSL_LOADING_FIRMWARE; 646 flush_scheduled_work();
649 up(&instance->u.serialize); 647}
650 648
651#ifdef USE_FW_LOADER
652 udsl_get_instance(&instance->u);
653 try_module_get(THIS_MODULE);
654 649
655 ret = kernel_thread(speedtch_load_firmware, instance, 650/**********
656 CLONE_FS | CLONE_FILES); 651** USB **
652**********/
657 653
658 if (ret >= 0) 654static struct usb_device_id speedtch_usb_ids[] = {
659 return; /* OK */ 655 {USB_DEVICE(0x06b9, 0x4061)},
656 {}
657};
660 658
661 dbg("speedtch_firmware_start: kernel_thread failed (%d)!", ret); 659MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
662 660
663 module_put(THIS_MODULE); 661static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
664 udsl_put_instance(&instance->u);
665 /* Just pretend it never happened... hope modem_run happens */
666#endif /* USE_FW_LOADER */
667 662
668 speedtch_got_firmware(instance, 0); 663static struct usb_driver speedtch_usb_driver = {
669} 664 .owner = THIS_MODULE,
670 665 .name = speedtch_driver_name,
671static int speedtch_firmware_wait(struct udsl_instance_data *instance) 666 .probe = speedtch_usb_probe,
672{ 667 .disconnect = usbatm_usb_disconnect,
673 speedtch_firmware_start((void *)instance); 668 .id_table = speedtch_usb_ids
669};
674 670
675 if (wait_event_interruptible(instance->firmware_waiters, instance->status != UDSL_LOADING_FIRMWARE) < 0) 671static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) {
676 return -ERESTARTSYS; 672 struct usb_interface *cur_intf;
673 int i;
677 674
678 return (instance->status == UDSL_LOADED_FIRMWARE) ? 0 : -EAGAIN; 675 for(i = 0; i < num_interfaces; i++)
676 if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
677 usb_set_intfdata(cur_intf, NULL);
678 usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
679 }
679} 680}
680 681
681/********** 682static int speedtch_bind(struct usbatm_data *usbatm,
682** USB ** 683 struct usb_interface *intf,
683**********/ 684 const struct usb_device_id *id,
684 685 int *need_heavy_init)
685static int speedtch_usb_ioctl(struct usb_interface *intf, unsigned int code,
686 void *user_data)
687{ 686{
688 struct speedtch_instance_data *instance = usb_get_intfdata(intf); 687 struct usb_device *usb_dev = interface_to_usbdev(intf);
688 struct usb_interface *cur_intf;
689 struct speedtch_instance_data *instance;
690 int ifnum = intf->altsetting->desc.bInterfaceNumber;
691 int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
692 int i, ret;
689 693
690 dbg("speedtch_usb_ioctl entered"); 694 usb_dbg(usbatm, "%s entered\n", __func__);
691 695
692 if (!instance) { 696 if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
693 dbg("speedtch_usb_ioctl: NULL instance!"); 697 usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
694 return -ENODEV; 698 return -ENODEV;
695 } 699 }
696 700
697 switch (code) { 701 /* claim all interfaces */
698 case UDSL_IOCTL_LINE_UP:
699 instance->u.atm_dev->signal = ATM_PHY_SIG_FOUND;
700 speedtch_got_firmware(instance, 1);
701 return (instance->u.status == UDSL_LOADED_FIRMWARE) ? 0 : -EIO;
702 case UDSL_IOCTL_LINE_DOWN:
703 instance->u.atm_dev->signal = ATM_PHY_SIG_LOST;
704 return 0;
705 default:
706 return -ENOTTY;
707 }
708}
709 702
710static int speedtch_usb_probe(struct usb_interface *intf, 703 for (i=0; i < num_interfaces; i++) {
711 const struct usb_device_id *id) 704 cur_intf = usb_ifnum_to_if(usb_dev, i);
712{
713 struct usb_device *dev = interface_to_usbdev(intf);
714 int ifnum = intf->altsetting->desc.bInterfaceNumber;
715 struct speedtch_instance_data *instance;
716 unsigned char mac_str[13];
717 int ret, i;
718 char buf7[SIZE_7];
719 705
720 dbg("speedtch_usb_probe: trying device with vendor=0x%x, product=0x%x, ifnum %d", 706 if ((i != ifnum) && cur_intf) {
721 le16_to_cpu(dev->descriptor.idVendor), 707 ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
722 le16_to_cpu(dev->descriptor.idProduct), ifnum);
723 708
724 if ((dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) || 709 if (ret < 0) {
725 (ifnum != 1)) 710 usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
726 return -ENODEV; 711 speedtch_release_interfaces(usb_dev, i);
727 712 return ret;
728 dbg("speedtch_usb_probe: device accepted"); 713 }
714 }
715 }
729 716
730 /* instance init */
731 instance = kmalloc(sizeof(*instance), GFP_KERNEL); 717 instance = kmalloc(sizeof(*instance), GFP_KERNEL);
718
732 if (!instance) { 719 if (!instance) {
733 dbg("speedtch_usb_probe: no memory for instance data!"); 720 usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
734 return -ENOMEM; 721 ret = -ENOMEM;
722 goto fail_release;
735 } 723 }
736 724
737 memset(instance, 0, sizeof(struct speedtch_instance_data)); 725 memset(instance, 0, sizeof(struct speedtch_instance_data));
738 726
739 if ((ret = usb_set_interface(dev, 0, 0)) < 0) 727 instance->usbatm = usbatm;
740 goto fail;
741 728
742 if ((ret = usb_set_interface(dev, 2, 0)) < 0) 729 INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
743 goto fail;
744 730
745 instance->u.data_endpoint = SPEEDTCH_ENDPOINT_DATA; 731 instance->status_checker.timer.function = speedtch_status_poll;
746 instance->u.firmware_wait = speedtch_firmware_wait; 732 instance->status_checker.timer.data = (unsigned long)instance;
747 instance->u.driver_name = speedtch_driver_name; 733 instance->poll_delay = MIN_POLL_DELAY;
748 734
749 ret = udsl_instance_setup(dev, &instance->u); 735 init_timer(&instance->resubmit_timer);
750 if (ret) 736 instance->resubmit_timer.function = speedtch_resubmit_int;
751 goto fail; 737 instance->resubmit_timer.data = (unsigned long)instance;
752 738
753 init_timer(&instance->poll_timer); 739 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
754 instance->poll_timer.function = speedtch_timer_poll;
755 instance->poll_timer.data = (unsigned long)instance;
756 740
757 INIT_WORK(&instance->poll_work, (void *)speedtch_poll_status, instance); 741 if (instance->int_urb)
742 usb_fill_int_urb(instance->int_urb, usb_dev,
743 usb_rcvintpipe(usb_dev, ENDPOINT_INT),
744 instance->int_data, sizeof(instance->int_data),
745 speedtch_handle_int, instance, 50);
746 else
747 usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
758 748
759 /* set MAC address, it is stored in the serial number */ 749 /* check whether the modem already seems to be alive */
760 memset(instance->u.atm_dev->esi, 0, sizeof(instance->u.atm_dev->esi)); 750 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
761 if (usb_string(dev, dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) { 751 0x12, 0xc0, 0x07, 0x00,
762 for (i = 0; i < 6; i++) 752 instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
763 instance->u.atm_dev->esi[i] =
764 (hex2int(mac_str[i * 2]) * 16) + (hex2int(mac_str[i * 2 + 1]));
765 }
766 753
767 /* First check whether the modem already seems to be alive */ 754 *need_heavy_init = (ret != SIZE_7);
768 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
769 0x12, 0xc0, 0x07, 0x00, buf7, SIZE_7, 500);
770 755
771 if (ret == SIZE_7) { 756 usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
772 dbg("firmware appears to be already loaded"); 757
773 speedtch_got_firmware(instance, 1); 758 if (*need_heavy_init)
774 speedtch_poll_status(instance); 759 if ((ret = usb_reset_device(usb_dev)) < 0)
775 } else { 760 goto fail_free;
776 speedtch_firmware_start(instance);
777 }
778 761
779 usb_set_intfdata(intf, instance); 762 usbatm->driver_data = instance;
780 763
781 return 0; 764 return 0;
782 765
783 fail: 766fail_free:
767 usb_free_urb(instance->int_urb);
784 kfree(instance); 768 kfree(instance);
785 769fail_release:
786 return -ENOMEM; 770 speedtch_release_interfaces(usb_dev, num_interfaces);
771 return ret;
787} 772}
788 773
789static void speedtch_usb_disconnect(struct usb_interface *intf) 774static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
790{ 775{
791 struct speedtch_instance_data *instance = usb_get_intfdata(intf); 776 struct usb_device *usb_dev = interface_to_usbdev(intf);
792 777 struct speedtch_instance_data *instance = usbatm->driver_data;
793 dbg("speedtch_usb_disconnect entered");
794
795 if (!instance) {
796 dbg("speedtch_usb_disconnect: NULL instance!");
797 return;
798 }
799 778
800/*QQ need to handle disconnects on interface #2 while uploading firmware */ 779 usb_dbg(usbatm, "%s entered\n", __func__);
801/*QQ and what about interface #1? */
802
803 if (instance->int_urb) {
804 struct urb *int_urb = instance->int_urb;
805 instance->int_urb = NULL;
806 wmb();
807 usb_unlink_urb(int_urb);
808 usb_free_urb(int_urb);
809 }
810 780
811 instance->int_data[0] = 1; 781 speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
812 del_timer_sync(&instance->poll_timer); 782 usb_free_urb(instance->int_urb);
813 wmb(); 783 kfree(instance);
814 flush_scheduled_work();
815
816 udsl_instance_disconnect(&instance->u);
817
818 /* clean up */
819 usb_set_intfdata(intf, NULL);
820 udsl_put_instance(&instance->u);
821} 784}
822 785
786
823/*********** 787/***********
824** init ** 788** init **
825***********/ 789***********/
826 790
791static struct usbatm_driver speedtch_usbatm_driver = {
792 .owner = THIS_MODULE,
793 .driver_name = speedtch_driver_name,
794 .bind = speedtch_bind,
795 .heavy_init = speedtch_heavy_init,
796 .unbind = speedtch_unbind,
797 .atm_start = speedtch_atm_start,
798 .atm_stop = speedtch_atm_stop,
799 .in = ENDPOINT_DATA,
800 .out = ENDPOINT_DATA
801};
802
803static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
804{
805 return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
806}
807
827static int __init speedtch_usb_init(void) 808static int __init speedtch_usb_init(void)
828{ 809{
829 dbg("speedtch_usb_init: driver version " DRIVER_VERSION); 810 dbg("%s: driver version %s", __func__, DRIVER_VERSION);
830 811
831 return usb_register(&speedtch_usb_driver); 812 return usb_register(&speedtch_usb_driver);
832} 813}
833 814
834static void __exit speedtch_usb_cleanup(void) 815static void __exit speedtch_usb_cleanup(void)
835{ 816{
836 dbg("speedtch_usb_cleanup entered"); 817 dbg("%s", __func__);
837 818
838 usb_deregister(&speedtch_usb_driver); 819 usb_deregister(&speedtch_usb_driver);
839} 820}