Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

3 files changed, 53 insertions, 32 deletions

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 96c1cacc7360..02da071fe1e7 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -31,16 +31,19 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
-#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <lantiq_soc.h>
 
 #define PORT_LTQ_ASC            111
 #define MAXPORTS                2
 #define UART_DUMMY_UER_RX       1
-#define DRVNAME                 "ltq_asc"
+#define DRVNAME                 "lantiq,asc"
 #ifdef __BIG_ENDIAN
 #define LTQ_ASC_TBUF            (0x0020 + 3)
 #define LTQ_ASC_RBUF            (0x0024 + 3)
@@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
 
 struct ltq_uart_port {
         struct uart_port        port;
+        /* clock used to derive divider */
+        struct clk              *fpiclk;
+        /* clock gating of the ASC core */
         struct clk              *clk;
         unsigned int            tx_irq;
         unsigned int            rx_irq;
@@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port)
         struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
         int retval;
 
-        port->uartclk = clk_get_rate(ltq_port->clk);
+        if (ltq_port->clk)
+                clk_enable(ltq_port->clk);
+        port->uartclk = clk_get_rate(ltq_port->fpiclk);
 
         ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
                 port->membase + LTQ_ASC_CLC);
@@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port)
                 port->membase + LTQ_ASC_RXFCON);
         ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
                 port->membase + LTQ_ASC_TXFCON);
+        if (ltq_port->clk)
+                clk_disable(ltq_port->clk);
 }
 
 static void
@@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options)
 
         port = &ltq_port->port;
 
-        port->uartclk = clk_get_rate(ltq_port->clk);
+        port->uartclk = clk_get_rate(ltq_port->fpiclk);
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = {
 static int __init
 lqasc_probe(struct platform_device *pdev)
 {
+        struct device_node *node = pdev->dev.of_node;
         struct ltq_uart_port *ltq_port;
         struct uart_port *port;
-        struct resource *mmres, *irqres;
-        int tx_irq, rx_irq, err_irq;
-        struct clk *clk;
+        struct resource *mmres, irqres[3];
+        int line = 0;
         int ret;
 
         mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-        if (!mmres || !irqres)
+        ret = of_irq_to_resource_table(node, irqres, 3);
+        if (!mmres || (ret != 3)) {
+                dev_err(&pdev->dev,
+                        "failed to get memory/irq for serial port\n");
                 return -ENODEV;
+        }
 
-        if (pdev->id >= MAXPORTS)
-                return -EBUSY;
+        /* check if this is the console port */
+        if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
+                line = 1;
 
-        if (lqasc_port[pdev->id] != NULL)
+        if (lqasc_port[line]) {
+                dev_err(&pdev->dev, "port %d already allocated\n", line);
                 return -EBUSY;
-
-        clk = clk_get(&pdev->dev, "fpi");
-        if (IS_ERR(clk)) {
-                pr_err("failed to get fpi clk\n");
-                return -ENOENT;
         }
 
-        tx_irq = platform_get_irq_byname(pdev, "tx");
-        rx_irq = platform_get_irq_byname(pdev, "rx");
-        err_irq = platform_get_irq_byname(pdev, "err");
-        if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
-                return -ENODEV;
-
-        ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+        ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port),
+                        GFP_KERNEL);
         if (!ltq_port)
                 return -ENOMEM;
 
@@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev)
         port->ops       = &lqasc_pops;
         port->fifosize  = 16;
         port->type      = PORT_LTQ_ASC,
-        port->line      = pdev->id;
+        port->line      = line;
         port->dev       = &pdev->dev;
-
-        port->irq       = tx_irq; /* unused, just to be backward-compatibe */
+        /* unused, just to be backward-compatible */
+        port->irq       = irqres[0].start;
         port->mapbase   = mmres->start;
 
-        ltq_port->clk   = clk;
+        ltq_port->fpiclk = clk_get_fpi();
+        if (IS_ERR(ltq_port->fpiclk)) {
+                pr_err("failed to get fpi clk\n");
+                return -ENOENT;
+        }
 
-        ltq_port->tx_irq = tx_irq;
-        ltq_port->rx_irq = rx_irq;
-        ltq_port->err_irq = err_irq;
+        /* not all asc ports have clock gates, lets ignore the return code */
+        ltq_port->clk = clk_get(&pdev->dev, NULL);
 
-        lqasc_port[pdev->id] = ltq_port;
+        ltq_port->tx_irq = irqres[0].start;
+        ltq_port->rx_irq = irqres[1].start;
+        ltq_port->err_irq = irqres[2].start;
+
+        lqasc_port[line] = ltq_port;
         platform_set_drvdata(pdev, ltq_port);
 
         ret = uart_add_one_port(&lqasc_reg, port);
@@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev)
         return ret;
 }
 
+static const struct of_device_id ltq_asc_match[] = {
+        { .compatible = DRVNAME },
+        {},
+};
+MODULE_DEVICE_TABLE(of, ltq_asc_match);
+
 static struct platform_driver lqasc_driver = {
         .driver         = {
                 .name   = DRVNAME,
                 .owner  = THIS_MODULE,
+                .of_match_table = ltq_asc_match,
         },
 };
 
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 0be8a2f00d0b..f76b1688c5c8 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/major.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 4001eee6c08d..92c00b24d0df 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -57,6 +57,7 @@
 #include <linux/ioport.h>
 #include <linux/irqflags.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/major.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>