tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 757 insertions, 0 deletions

diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
new file mode 100644
index 000000000000..75038ad2b242
--- /dev/null
+++ b/drivers/tty/serial/sc26xx.c
@@ -0,0 +1,757 @@
+/*
+ * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
+ *
+ * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#define SC26XX_MAJOR         204
+#define SC26XX_MINOR_START   205
+#define SC26XX_NR            2
+
+struct uart_sc26xx_port {
+        struct uart_port      port[2];
+        u8     dsr_mask[2];
+        u8     cts_mask[2];
+        u8     dcd_mask[2];
+        u8     ri_mask[2];
+        u8     dtr_mask[2];
+        u8     rts_mask[2];
+        u8     imr;
+};
+
+/* register common to both ports */
+#define RD_ISR      0x14
+#define RD_IPR      0x34
+
+#define WR_ACR      0x10
+#define WR_IMR      0x14
+#define WR_OPCR     0x34
+#define WR_OPR_SET  0x38
+#define WR_OPR_CLR  0x3C
+
+/* access common register */
+#define READ_SC(p, r)        readb((p)->membase + RD_##r)
+#define WRITE_SC(p, r, v)    writeb((v), (p)->membase + WR_##r)
+
+/* register per port */
+#define RD_PORT_MRx 0x00
+#define RD_PORT_SR  0x04
+#define RD_PORT_RHR 0x0c
+
+#define WR_PORT_MRx 0x00
+#define WR_PORT_CSR 0x04
+#define WR_PORT_CR  0x08
+#define WR_PORT_THR 0x0c
+
+/* SR bits */
+#define SR_BREAK    (1 << 7)
+#define SR_FRAME    (1 << 6)
+#define SR_PARITY   (1 << 5)
+#define SR_OVERRUN  (1 << 4)
+#define SR_TXRDY    (1 << 2)
+#define SR_RXRDY    (1 << 0)
+
+#define CR_RES_MR   (1 << 4)
+#define CR_RES_RX   (2 << 4)
+#define CR_RES_TX   (3 << 4)
+#define CR_STRT_BRK (6 << 4)
+#define CR_STOP_BRK (7 << 4)
+#define CR_DIS_TX   (1 << 3)
+#define CR_ENA_TX   (1 << 2)
+#define CR_DIS_RX   (1 << 1)
+#define CR_ENA_RX   (1 << 0)
+
+/* ISR bits */
+#define ISR_RXRDYB  (1 << 5)
+#define ISR_TXRDYB  (1 << 4)
+#define ISR_RXRDYA  (1 << 1)
+#define ISR_TXRDYA  (1 << 0)
+
+/* IMR bits */
+#define IMR_RXRDY   (1 << 1)
+#define IMR_TXRDY   (1 << 0)
+
+/* access port register */
+static inline u8 read_sc_port(struct uart_port *p, u8 reg)
+{
+        return readb(p->membase + p->line * 0x20 + reg);
+}
+
+static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
+{
+        writeb(val, p->membase + p->line * 0x20 + reg);
+}
+
+#define READ_SC_PORT(p, r)     read_sc_port(p, RD_PORT_##r)
+#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)
+
+static void sc26xx_enable_irq(struct uart_port *port, int mask)
+{
+        struct uart_sc26xx_port *up;
+        int line = port->line;
+
+        port -= line;
+        up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+        up->imr |= mask << (line * 4);
+        WRITE_SC(port, IMR, up->imr);
+}
+
+static void sc26xx_disable_irq(struct uart_port *port, int mask)
+{
+        struct uart_sc26xx_port *up;
+        int line = port->line;
+
+        port -= line;
+        up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+        up->imr &= ~(mask << (line * 4));
+        WRITE_SC(port, IMR, up->imr);
+}
+
+static struct tty_struct *receive_chars(struct uart_port *port)
+{
+        struct tty_struct *tty = NULL;
+        int limit = 10000;
+        unsigned char ch;
+        char flag;
+        u8 status;
+
+        if (port->state != NULL)                /* Unopened serial console */
+                tty = port->state->port.tty;
+
+        while (limit-- > 0) {
+                status = READ_SC_PORT(port, SR);
+                if (!(status & SR_RXRDY))
+                        break;
+                ch = READ_SC_PORT(port, RHR);
+
+                flag = TTY_NORMAL;
+                port->icount.rx++;
+
+                if (unlikely(status & (SR_BREAK | SR_FRAME |
+                                       SR_PARITY | SR_OVERRUN))) {
+                        if (status & SR_BREAK) {
+                                status &= ~(SR_PARITY | SR_FRAME);
+                                port->icount.brk++;
+                                if (uart_handle_break(port))
+                                        continue;
+                        } else if (status & SR_PARITY)
+                                port->icount.parity++;
+                        else if (status & SR_FRAME)
+                                port->icount.frame++;
+                        if (status & SR_OVERRUN)
+                                port->icount.overrun++;
+
+                        status &= port->read_status_mask;
+                        if (status & SR_BREAK)
+                                flag = TTY_BREAK;
+                        else if (status & SR_PARITY)
+                                flag = TTY_PARITY;
+                        else if (status & SR_FRAME)
+                                flag = TTY_FRAME;
+                }
+
+                if (uart_handle_sysrq_char(port, ch))
+                        continue;
+
+                if (status & port->ignore_status_mask)
+                        continue;
+
+                tty_insert_flip_char(tty, ch, flag);
+        }
+        return tty;
+}
+
+static void transmit_chars(struct uart_port *port)
+{
+        struct circ_buf *xmit;
+
+        if (!port->state)
+                return;
+
+        xmit = &port->state->xmit;
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+                sc26xx_disable_irq(port, IMR_TXRDY);
+                return;
+        }
+        while (!uart_circ_empty(xmit)) {
+                if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
+                        break;
+
+                WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+        }
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+}
+
+static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
+{
+        struct uart_sc26xx_port *up = dev_id;
+        struct tty_struct *tty;
+        unsigned long flags;
+        u8 isr;
+
+        spin_lock_irqsave(&up->port[0].lock, flags);
+
+        tty = NULL;
+        isr = READ_SC(&up->port[0], ISR);
+        if (isr & ISR_TXRDYA)
+            transmit_chars(&up->port[0]);
+        if (isr & ISR_RXRDYA)
+            tty = receive_chars(&up->port[0]);
+
+        spin_unlock(&up->port[0].lock);
+
+        if (tty)
+                tty_flip_buffer_push(tty);
+
+        spin_lock(&up->port[1].lock);
+
+        tty = NULL;
+        if (isr & ISR_TXRDYB)
+            transmit_chars(&up->port[1]);
+        if (isr & ISR_RXRDYB)
+            tty = receive_chars(&up->port[1]);
+
+        spin_unlock_irqrestore(&up->port[1].lock, flags);
+
+        if (tty)
+                tty_flip_buffer_push(tty);
+
+        return IRQ_HANDLED;
+}
+
+/* port->lock is not held.  */
+static unsigned int sc26xx_tx_empty(struct uart_port *port)
+{
+        return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
+}
+
+/* port->lock held by caller.  */
+static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        struct uart_sc26xx_port *up;
+        int line = port->line;
+
+        port -= line;
+        up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+        if (up->dtr_mask[line]) {
+                if (mctrl & TIOCM_DTR)
+                        WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
+                else
+                        WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
+        }
+        if (up->rts_mask[line]) {
+                if (mctrl & TIOCM_RTS)
+                        WRITE_SC(port, OPR_SET, up->rts_mask[line]);
+                else
+                        WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
+        }
+}
+
+/* port->lock is held by caller and interrupts are disabled.  */
+static unsigned int sc26xx_get_mctrl(struct uart_port *port)
+{
+        struct uart_sc26xx_port *up;
+        int line = port->line;
+        unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+        u8 ipr;
+
+        port -= line;
+        up = container_of(port, struct uart_sc26xx_port, port[0]);
+        ipr = READ_SC(port, IPR) ^ 0xff;
+
+        if (up->dsr_mask[line]) {
+                mctrl &= ~TIOCM_DSR;
+                mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
+        }
+        if (up->cts_mask[line]) {
+                mctrl &= ~TIOCM_CTS;
+                mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
+        }
+        if (up->dcd_mask[line]) {
+                mctrl &= ~TIOCM_CAR;
+                mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
+        }
+        if (up->ri_mask[line]) {
+                mctrl &= ~TIOCM_RNG;
+                mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
+        }
+        return mctrl;
+}
+
+/* port->lock held by caller.  */
+static void sc26xx_stop_tx(struct uart_port *port)
+{
+        return;
+}
+
+/* port->lock held by caller.  */
+static void sc26xx_start_tx(struct uart_port *port)
+{
+        struct circ_buf *xmit = &port->state->xmit;
+
+        while (!uart_circ_empty(xmit)) {
+                if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
+                        sc26xx_enable_irq(port, IMR_TXRDY);
+                        break;
+                }
+                WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+        }
+}
+
+/* port->lock held by caller.  */
+static void sc26xx_stop_rx(struct uart_port *port)
+{
+}
+
+/* port->lock held by caller.  */
+static void sc26xx_enable_ms(struct uart_port *port)
+{
+}
+
+/* port->lock is not held.  */
+static void sc26xx_break_ctl(struct uart_port *port, int break_state)
+{
+        if (break_state == -1)
+                WRITE_SC_PORT(port, CR, CR_STRT_BRK);
+        else
+                WRITE_SC_PORT(port, CR, CR_STOP_BRK);
+}
+
+/* port->lock is not held.  */
+static int sc26xx_startup(struct uart_port *port)
+{
+        sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+        WRITE_SC(port, OPCR, 0);
+
+        /* reset tx and rx */
+        WRITE_SC_PORT(port, CR, CR_RES_RX);
+        WRITE_SC_PORT(port, CR, CR_RES_TX);
+
+        /* start rx/tx */
+        WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
+
+        /* enable irqs */
+        sc26xx_enable_irq(port, IMR_RXRDY);
+        return 0;
+}
+
+/* port->lock is not held.  */
+static void sc26xx_shutdown(struct uart_port *port)
+{
+        /* disable interrupst */
+        sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+
+        /* stop tx/rx */
+        WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
+}
+
+/* port->lock is not held.  */
+static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
+                              struct ktermios *old)
+{
+        unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+        unsigned int quot = uart_get_divisor(port, baud);
+        unsigned int iflag, cflag;
+        unsigned long flags;
+        u8 mr1, mr2, csr;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
+                udelay(2);
+
+        WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
+
+        iflag = termios->c_iflag;
+        cflag = termios->c_cflag;
+
+        port->read_status_mask = SR_OVERRUN;
+        if (iflag & INPCK)
+                port->read_status_mask |= SR_PARITY | SR_FRAME;
+        if (iflag & (BRKINT | PARMRK))
+                port->read_status_mask |= SR_BREAK;
+
+        port->ignore_status_mask = 0;
+        if (iflag & IGNBRK)
+                port->ignore_status_mask |= SR_BREAK;
+        if ((cflag & CREAD) == 0)
+                port->ignore_status_mask |= SR_BREAK | SR_FRAME |
+                                            SR_PARITY | SR_OVERRUN;
+
+        switch (cflag & CSIZE) {
+        case CS5:
+                mr1 = 0x00;
+                break;
+        case CS6:
+                mr1 = 0x01;
+                break;
+        case CS7:
+                mr1 = 0x02;
+                break;
+        default:
+        case CS8:
+                mr1 = 0x03;
+                break;
+        }
+        mr2 = 0x07;
+        if (cflag & CSTOPB)
+                mr2 = 0x0f;
+        if (cflag & PARENB) {
+                if (cflag & PARODD)
+                        mr1 |= (1 << 2);
+        } else
+                mr1 |= (2 << 3);
+
+        switch (baud) {
+        case 50:
+                csr = 0x00;
+                break;
+        case 110:
+                csr = 0x11;
+                break;
+        case 134:
+                csr = 0x22;
+                break;
+        case 200:
+                csr = 0x33;
+                break;
+        case 300:
+                csr = 0x44;
+                break;
+        case 600:
+                csr = 0x55;
+                break;
+        case 1200:
+                csr = 0x66;
+                break;
+        case 2400:
+                csr = 0x88;
+                break;
+        case 4800:
+                csr = 0x99;
+                break;
+        default:
+        case 9600:
+                csr = 0xbb;
+                break;
+        case 19200:
+                csr = 0xcc;
+                break;
+        }
+
+        WRITE_SC_PORT(port, CR, CR_RES_MR);
+        WRITE_SC_PORT(port, MRx, mr1);
+        WRITE_SC_PORT(port, MRx, mr2);
+
+        WRITE_SC(port, ACR, 0x80);
+        WRITE_SC_PORT(port, CSR, csr);
+
+        /* reset tx and rx */
+        WRITE_SC_PORT(port, CR, CR_RES_RX);
+        WRITE_SC_PORT(port, CR, CR_RES_TX);
+
+        WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
+        while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
+                udelay(2);
+
+        /* XXX */
+        uart_update_timeout(port, cflag,
+                            (port->uartclk / (16 * quot)));
+
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *sc26xx_type(struct uart_port *port)
+{
+        return "SC26XX";
+}
+
+static void sc26xx_release_port(struct uart_port *port)
+{
+}
+
+static int sc26xx_request_port(struct uart_port *port)
+{
+        return 0;
+}
+
+static void sc26xx_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+        return -EINVAL;
+}
+
+static struct uart_ops sc26xx_ops = {
+        .tx_empty       = sc26xx_tx_empty,
+        .set_mctrl      = sc26xx_set_mctrl,
+        .get_mctrl      = sc26xx_get_mctrl,
+        .stop_tx        = sc26xx_stop_tx,
+        .start_tx       = sc26xx_start_tx,
+        .stop_rx        = sc26xx_stop_rx,
+        .enable_ms      = sc26xx_enable_ms,
+        .break_ctl      = sc26xx_break_ctl,
+        .startup        = sc26xx_startup,
+        .shutdown       = sc26xx_shutdown,
+        .set_termios    = sc26xx_set_termios,
+        .type           = sc26xx_type,
+        .release_port   = sc26xx_release_port,
+        .request_port   = sc26xx_request_port,
+        .config_port    = sc26xx_config_port,
+        .verify_port    = sc26xx_verify_port,
+};
+
+static struct uart_port *sc26xx_port;
+
+#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
+static void sc26xx_console_putchar(struct uart_port *port, char c)
+{
+        unsigned long flags;
+        int limit = 1000000;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        while (limit-- > 0) {
+                if (READ_SC_PORT(port, SR) & SR_TXRDY) {
+                        WRITE_SC_PORT(port, THR, c);
+                        break;
+                }
+                udelay(2);
+        }
+
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
+{
+        struct uart_port *port = sc26xx_port;
+        int i;
+
+        for (i = 0; i < n; i++) {
+                if (*s == '\n')
+                        sc26xx_console_putchar(port, '\r');
+                sc26xx_console_putchar(port, *s++);
+        }
+}
+
+static int __init sc26xx_console_setup(struct console *con, char *options)
+{
+        struct uart_port *port = sc26xx_port;
+        int baud = 9600;
+        int bits = 8;
+        int parity = 'n';
+        int flow = 'n';
+
+        if (port->type != PORT_SC26XX)
+                return -1;
+
+        printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+        return uart_set_options(port, con, baud, parity, bits, flow);
+}
+
+static struct uart_driver sc26xx_reg;
+static struct console sc26xx_console = {
+        .name   =       "ttySC",
+        .write  =       sc26xx_console_write,
+        .device =       uart_console_device,
+        .setup  =       sc26xx_console_setup,
+        .flags  =       CON_PRINTBUFFER,
+        .index  =       -1,
+        .data   =       &sc26xx_reg,
+};
+#define SC26XX_CONSOLE   &sc26xx_console
+#else
+#define SC26XX_CONSOLE   NULL
+#endif
+
+static struct uart_driver sc26xx_reg = {
+        .owner                  = THIS_MODULE,
+        .driver_name            = "SC26xx",
+        .dev_name               = "ttySC",
+        .major                  = SC26XX_MAJOR,
+        .minor                  = SC26XX_MINOR_START,
+        .nr                     = SC26XX_NR,
+        .cons                   = SC26XX_CONSOLE,
+};
+
+static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
+{
+        unsigned int bit = (flags >> bitpos) & 15;
+
+        return bit ? (1 << (bit - 1)) : 0;
+}
+
+static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
+                                        int line, unsigned int data)
+{
+        up->dtr_mask[line] = sc26xx_flags2mask(data,  0);
+        up->rts_mask[line] = sc26xx_flags2mask(data,  4);
+        up->dsr_mask[line] = sc26xx_flags2mask(data,  8);
+        up->cts_mask[line] = sc26xx_flags2mask(data, 12);
+        up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
+        up->ri_mask[line]  = sc26xx_flags2mask(data, 20);
+}
+
+static int __devinit sc26xx_probe(struct platform_device *dev)
+{
+        struct resource *res;
+        struct uart_sc26xx_port *up;
+        unsigned int *sc26xx_data = dev->dev.platform_data;
+        int err;
+
+        res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+        if (!res)
+                return -ENODEV;
+
+        up = kzalloc(sizeof *up, GFP_KERNEL);
+        if (unlikely(!up))
+                return -ENOMEM;
+
+        up->port[0].line = 0;
+        up->port[0].ops = &sc26xx_ops;
+        up->port[0].type = PORT_SC26XX;
+        up->port[0].uartclk = (29491200 / 16); /* arbitrary */
+
+        up->port[0].mapbase = res->start;
+        up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
+        up->port[0].iotype = UPIO_MEM;
+        up->port[0].irq = platform_get_irq(dev, 0);
+
+        up->port[0].dev = &dev->dev;
+
+        sc26xx_init_masks(up, 0, sc26xx_data[0]);
+
+        sc26xx_port = &up->port[0];
+
+        up->port[1].line = 1;
+        up->port[1].ops = &sc26xx_ops;
+        up->port[1].type = PORT_SC26XX;
+        up->port[1].uartclk = (29491200 / 16); /* arbitrary */
+
+        up->port[1].mapbase = up->port[0].mapbase;
+        up->port[1].membase = up->port[0].membase;
+        up->port[1].iotype = UPIO_MEM;
+        up->port[1].irq = up->port[0].irq;
+
+        up->port[1].dev = &dev->dev;
+
+        sc26xx_init_masks(up, 1, sc26xx_data[1]);
+
+        err = uart_register_driver(&sc26xx_reg);
+        if (err)
+                goto out_free_port;
+
+        sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;
+
+        err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
+        if (err)
+                goto out_unregister_driver;
+
+        err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
+        if (err)
+                goto out_remove_port0;
+
+        err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
+        if (err)
+                goto out_remove_ports;
+
+        dev_set_drvdata(&dev->dev, up);
+        return 0;
+
+out_remove_ports:
+        uart_remove_one_port(&sc26xx_reg, &up->port[1]);
+out_remove_port0:
+        uart_remove_one_port(&sc26xx_reg, &up->port[0]);
+
+out_unregister_driver:
+        uart_unregister_driver(&sc26xx_reg);
+
+out_free_port:
+        kfree(up);
+        sc26xx_port = NULL;
+        return err;
+}
+
+
+static int __exit sc26xx_driver_remove(struct platform_device *dev)
+{
+        struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev);
+
+        free_irq(up->port[0].irq, up);
+
+        uart_remove_one_port(&sc26xx_reg, &up->port[0]);
+        uart_remove_one_port(&sc26xx_reg, &up->port[1]);
+
+        uart_unregister_driver(&sc26xx_reg);
+
+        kfree(up);
+        sc26xx_port = NULL;
+
+        dev_set_drvdata(&dev->dev, NULL);
+        return 0;
+}
+
+static struct platform_driver sc26xx_driver = {
+        .probe  = sc26xx_probe,
+        .remove = __devexit_p(sc26xx_driver_remove),
+        .driver = {
+                .name   = "SC26xx",
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init sc26xx_init(void)
+{
+        return platform_driver_register(&sc26xx_driver);
+}
+
+static void __exit sc26xx_exit(void)
+{
+        platform_driver_unregister(&sc26xx_driver);
+}
+
+module_init(sc26xx_init);
+module_exit(sc26xx_exit);
+
+
+MODULE_AUTHOR("Thomas Bogendörfer");
+MODULE_DESCRIPTION("SC681/SC2692 serial driver");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:SC26xx");